Shadi Najjar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Shadi Najjar has a total of 88 co-authors. Here are the top co-authors by number of shared publications:
- Salah Sadek
Department of Civil and Environmental Engineering, American University of Beirut, Beirut, Lebanon
28 shared publications Salah Sadek
Professor, Dept. of Civil and Environmental Engineering, American University of Beirut – Mediterraneo (AUB Mediterraneo), Pafos, Cyprus; Dept. of Civil and Environmental Engineering, American Univ. of Beirut, P.O. Box 11-0236, Riad ElSolh, Beirut 1107-2020, Lebanon
11 shared publications- George Saad
Department of Civil and Environmental Engineering, American University of Beirut, Beirut, Lebanon
5 shared publications - Robert B. Gilbert
The University of Texas at Austin
5 shared publications - Assile Abou Diab
College of Architectural Engineering and Digital Design (CADD), Dar Al Uloom University, Riyadh, Saudi Arabia
4 shared publications - Khaled H. Charif
Lead Geotechnical Engineer, Fugro Middle East, P.O. Box 2863, Dubai, United Arab Emirates
4 shared publications
Latest Publications
- 1 July 2024
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 24 (7)
Drained Triaxial Response of Natural Clay Reinforced with Natural Hemp Fibers
- 1 July 2024
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 24 (7)
Drained Triaxial Response of Natural Clay Reinforced with Natural Hemp Fibers
- Open Access
- 13 December 2023
- Published by Springer Nature in Research Square
Active P-Y Curves for Rigid Walls Supporting Granular Soil
In the performance-based design of structures with basement floors, there is interest in quantifying the relationship between the lateral earth pressure and the wall displacement using p-y curves. This paper focuses on studying the development of active earth pressure behind rigid walls in the context of p-y curves. The study aims at characterizing the components of the p-y relationship and proposing a rigorous non-linear “at-rest to active” p-y model. To achieve this objective, walls with different heights retaining granular soils of different relative densities were modeled in PLAXIS 2D. Results indicate that active p-y curves are non-linear and are affected by the height of the wall, soil density, embedment depth, and the soil-wall interface friction angle. More importantly, results show that the p-y relationship for a frictional wall is a function of (1) the p-y relationship of an equivalent non-frictional wall and (2) the reduction in shear stress with displacement at the soil/wall interface due to friction. Results are used to derive a simplified hyperbolic p-y model for non-frictional walls and a bilinear model for the development of frictional shear stresses at the soil-wall interface. Validation experiments indicated that these simple models could provide realistic estimates of the p-y response of walls without the need for finite element analyses.
- 13 December 2023
- Published by Springer Nature in Research Square
Open AccessActive P-Y Curves for Rigid Walls Supporting Granular Soil
In the performance-based design of structures with basement floors, there is interest in quantifying the relationship between the lateral earth pressure and the wall displacement using p-y curves. This paper focuses on studying the development of active earth pressure behind rigid walls in the context of p-y curves. The study aims at characterizing the components of the p-y relationship and proposing a rigorous non-linear “at-rest to active” p-y model. To achieve this objective, walls with different heights retaining granular soils of different relative densities were modeled in PLAXIS 2D. Results indicate that active p-y curves are non-linear and are affected by the height of the wall, soil density, embedment depth, and the soil-wall interface friction angle. More importantly, results show that the p-y relationship for a frictional wall is a function of (1) the p-y relationship of an equivalent non-frictional wall and (2) the reduction in shear stress with displacement at the soil/wall interface due to friction. Results are used to derive a simplified hyperbolic p-y model for non-frictional walls and a bilinear model for the development of frictional shear stresses at the soil-wall interface. Validation experiments indicated that these simple models could provide realistic estimates of the p-y response of walls without the need for finite element analyses.
- 23 November 2022
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 46 (1) , 104-131
Experimental Setup for Measuring p-y Curves of Rigid Walls Supporting Granular Backfill
In the context of performance-based design, there is interest in quantifying the relationship between the lateral earth pressure and the wall displacement using the concept of p-y curves. Although p-y curves have been extensively used in the analysis of piles, their use in the analysis of rigid walls is still in its early stages. There is a need for realistic and simplified models that could describe the p-y relationship for rigid walls to be used as input in robust soil-structure-interaction analyses. This paper aims at studying the development of lateral stresses behind rigid walls in the context of p-y curves using a laboratory-scale retaining wall prototype that is 0.5 m wide, 1.2 m high, and 2.6 m long. The main objective is to provide insight on the p-y response behind rigid walls under static and cyclic loading conditions for different backfill densities and confinement conditions. Results indicate that the proposed experimental setup yields repeatable and consistent measurements of the p-y response, which was found to be highly nonlinear and not adequately represented by the simple elastic-perfectly plastic model that was adopted in the literature in modeling soil-structure interaction between basement walls and sand backfill. Unique results from the cyclic tests indicated a process of densification that dominated the volumetric tendency of the sand during cyclic loading, with the p-y curves showing a significant increase in stiffness and maximum pressure at the passive side after 10 loading cycles. The gradual increase in stiffness decreased with the number of cycles until convergence in the passive stiffness was observed after 9 to 10 cycles.
- 23 November 2022
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 46 (1) , 104-131
Experimental Setup for Measuring p-y Curves of Rigid Walls Supporting Granular Backfill
In the context of performance-based design, there is interest in quantifying the relationship between the lateral earth pressure and the wall displacement using the concept of p-y curves. Although p-y curves have been extensively used in the analysis of piles, their use in the analysis of rigid walls is still in its early stages. There is a need for realistic and simplified models that could describe the p-y relationship for rigid walls to be used as input in robust soil-structure-interaction analyses. This paper aims at studying the development of lateral stresses behind rigid walls in the context of p-y curves using a laboratory-scale retaining wall prototype that is 0.5 m wide, 1.2 m high, and 2.6 m long. The main objective is to provide insight on the p-y response behind rigid walls under static and cyclic loading conditions for different backfill densities and confinement conditions. Results indicate that the proposed experimental setup yields repeatable and consistent measurements of the p-y response, which was found to be highly nonlinear and not adequately represented by the simple elastic-perfectly plastic model that was adopted in the literature in modeling soil-structure interaction between basement walls and sand backfill. Unique results from the cyclic tests indicated a process of densification that dominated the volumetric tendency of the sand during cyclic loading, with the p-y curves showing a significant increase in stiffness and maximum pressure at the passive side after 10 loading cycles. The gradual increase in stiffness decreased with the number of cycles until convergence in the passive stiffness was observed after 9 to 10 cycles.
- 1 November 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 148 (11) , 04022086
Drained Axial Pipe-Soil Resistance at Low Confinement Using Tilt Table and Direct Shear Tests
Establishing a reliable value for the axial pipe–soil interface resistance is critical for the design of offshore pipelines. Over the last few years, several independent research groups have modified existing methodologies or devised new testing setups to further develop our understanding of the behavior of the pipe–soil interface at low contact stresses. The most common laboratory experimental methods adopted have been based on either tilt table tests or interface direct shear tests. However, a direct comparison between the results of these two testing methodologies has not been established. This paper aims at designing and fabricating a tilt table and interface direct shear setup capable of accurately estimating the drained interface resistance at low normal stresses, in addition to comparing their results under identical testing conditions. Both setups tested the drained clay–solid interface response by varying the soil composition (high and low plasticity clay), the interface roughness (smooth and rough), and the normal stress range. Results showed that the drained residual failure envelopes for the clays and clay–solid interfaces were nonlinear and could be modeled by a simple power model. The interface response was clearly dependent on the interface roughness, particularly when the roughness was normalized with the mean grain size. In the case of smooth interfaces, identical friction angles were obtained from the tilt table and the interface direct shear, whereas in the case of rough interfaces, the interface direct shear yielded lower friction angle values.
- 1 November 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 148 (11) , 04022086
Drained Axial Pipe-Soil Resistance at Low Confinement Using Tilt Table and Direct Shear Tests
Establishing a reliable value for the axial pipe–soil interface resistance is critical for the design of offshore pipelines. Over the last few years, several independent research groups have modified existing methodologies or devised new testing setups to further develop our understanding of the behavior of the pipe–soil interface at low contact stresses. The most common laboratory experimental methods adopted have been based on either tilt table tests or interface direct shear tests. However, a direct comparison between the results of these two testing methodologies has not been established. This paper aims at designing and fabricating a tilt table and interface direct shear setup capable of accurately estimating the drained interface resistance at low normal stresses, in addition to comparing their results under identical testing conditions. Both setups tested the drained clay–solid interface response by varying the soil composition (high and low plasticity clay), the interface roughness (smooth and rough), and the normal stress range. Results showed that the drained residual failure envelopes for the clays and clay–solid interfaces were nonlinear and could be modeled by a simple power model. The interface response was clearly dependent on the interface roughness, particularly when the roughness was normalized with the mean grain size. In the case of smooth interfaces, identical friction angles were obtained from the tilt table and the interface direct shear, whereas in the case of rough interfaces, the interface direct shear yielded lower friction angle values.
- 23 June 2022
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 45 (5) , 915-935
A Novel Proof of Concept Experimental Setup for Seabed-Pipe Interface Friction Measurements
Offshore hydrocarbon pipelines operate at relatively high pressures and temperatures. These conditions lead to their expansion and contraction and ultimately result in pipeline buckling or “walking” after multiple cycles of operation. Such movements are typically opposed by the axial resistance of the pipe-soil interface, which has to be accurately evaluated to optimize the engineering performance of the pipelines while minimizing testing and construction costs. To date, different testing techniques have been adopted to evaluate this resistance throughout the pipeline operational life. These include laboratory soil element testing, laboratory model testing, and in situ testing using specialized, complex, and costly devices. Despite being the most reliable testing technique, in situ tests are limited by the very small number of available specialized field equipment, e.g., the Fugro SMARTPIPE and the recently developed “pipe-like” penetrometers, both of which suffer from some drawbacks related to high costs, practicality, and testing conditions. This paper presents an attempt at addressing most of the limitations that were identified in the currently available methods, leading to the development of a new in situ, cost-effective apparatus for measuring axial pipeline resistance. A laboratory proof of concept experimental setup that could be adapted in future work to become an autonomous field apparatus was designed, produced, deployed on a clay bed and tested under normal stresses in the low-pressure range. The prototype reliably captured the effects of normal stress on the drained interface resistance. It produced accurate interface friction factors that are comparable to those obtained from the direct shear tests on the same soil and interface. The results obtained are very promising and confirmed the practicality and functionality of the proposed prototype. Some areas of improvement that would enhance the efficiency and reliability of the test were identified and will be applied to future versions of the device.
- 23 June 2022
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 45 (5) , 915-935
A Novel Proof of Concept Experimental Setup for Seabed-Pipe Interface Friction Measurements
Offshore hydrocarbon pipelines operate at relatively high pressures and temperatures. These conditions lead to their expansion and contraction and ultimately result in pipeline buckling or “walking” after multiple cycles of operation. Such movements are typically opposed by the axial resistance of the pipe-soil interface, which has to be accurately evaluated to optimize the engineering performance of the pipelines while minimizing testing and construction costs. To date, different testing techniques have been adopted to evaluate this resistance throughout the pipeline operational life. These include laboratory soil element testing, laboratory model testing, and in situ testing using specialized, complex, and costly devices. Despite being the most reliable testing technique, in situ tests are limited by the very small number of available specialized field equipment, e.g., the Fugro SMARTPIPE and the recently developed “pipe-like” penetrometers, both of which suffer from some drawbacks related to high costs, practicality, and testing conditions. This paper presents an attempt at addressing most of the limitations that were identified in the currently available methods, leading to the development of a new in situ, cost-effective apparatus for measuring axial pipeline resistance. A laboratory proof of concept experimental setup that could be adapted in future work to become an autonomous field apparatus was designed, produced, deployed on a clay bed and tested under normal stresses in the low-pressure range. The prototype reliably captured the effects of normal stress on the drained interface resistance. It produced accurate interface friction factors that are comparable to those obtained from the direct shear tests on the same soil and interface. The results obtained are very promising and confirmed the practicality and functionality of the proposed prototype. Some areas of improvement that would enhance the efficiency and reliability of the test were identified and will be applied to future versions of the device.
- 28 May 2022
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 40 (9) , 4563-4583
Reliability-Based Design of Spatially Random Two-Layered Clayey Slopes
- 28 May 2022
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 40 (9) , 4563-4583
Reliability-Based Design of Spatially Random Two-Layered Clayey Slopes
- 13 April 2022
- Published by Springer Nature in Acta Geotechnica
- Vol. 18 (1) , 395-412
Studying the effect of partial drainage on the response of soft clays reinforced with sand column groups
- 13 April 2022
- Published by Springer Nature in Acta Geotechnica
- Vol. 18 (1) , 395-412
Studying the effect of partial drainage on the response of soft clays reinforced with sand column groups
- 1 October 2021
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 21 (10) , 04021180
Large-Scale Instrumented Triaxial Setup for Investigating the Response of Soft Clay Reinforced with Sand Column Groups
Granular columns are widely used as a soil improvement solution adopted in the case of soft clays in an effort to increase their bearing capacity and stiffness. Granular columns, whether sand drains or gravel columns, are designed and constructed in groups and not as individual elements, given that there is a clear need to study the group effects and load sharing under various drainage conditions. Toward this need, a new fully instrumented triaxial test setup was developed and utilized to investigate the overall response of the composite. Particular emphasis was placed on monitoring pore-water pressures and contact stresses over the sand columns and the surrounding clay. The results from clay specimens that were reinforced at area replacement ratios of 17.1% and 30.4% indicate that the test setup is capable of quantifying the distribution of the stresses in the columns and the surrounding clay at different levels of axial strain. As such, previous information about the dependency of the stress concentration ratio on the area replacement ratio, axial strain, rate of loading, and drainage conditions could be inferred. It is anticipated that the insights gained and reported in this paper will facilitate the development of design methodologies for soft clays reinforced with sand column groups.
- 1 October 2021
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 21 (10) , 04021180
Large-Scale Instrumented Triaxial Setup for Investigating the Response of Soft Clay Reinforced with Sand Column Groups
Granular columns are widely used as a soil improvement solution adopted in the case of soft clays in an effort to increase their bearing capacity and stiffness. Granular columns, whether sand drains or gravel columns, are designed and constructed in groups and not as individual elements, given that there is a clear need to study the group effects and load sharing under various drainage conditions. Toward this need, a new fully instrumented triaxial test setup was developed and utilized to investigate the overall response of the composite. Particular emphasis was placed on monitoring pore-water pressures and contact stresses over the sand columns and the surrounding clay. The results from clay specimens that were reinforced at area replacement ratios of 17.1% and 30.4% indicate that the test setup is capable of quantifying the distribution of the stresses in the columns and the surrounding clay at different levels of axial strain. As such, previous information about the dependency of the stress concentration ratio on the area replacement ratio, axial strain, rate of loading, and drainage conditions could be inferred. It is anticipated that the insights gained and reported in this paper will facilitate the development of design methodologies for soft clays reinforced with sand column groups.
- 1 August 2020
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Ground Improvement
- Vol. 173 (3) , 170-186
Drained triaxial response of clay reinforced with sand columns
In ground-improvement applications involving stone columns in soft clays, the columns act as drains that facilitate partial drainage during practical load applications. Partial drainage could improve the short-term strength of the clay/column composite. The objective of this work was to bracket the range of loading conditions by investigating the fully drained response of clay/column composites through consolidated drained triaxial tests. The area replacement ratio, the column penetration ratio and the presence of geotextile encasement were varied in the testing programme. A maximum improvement of 69% was observed in the deviatoric stress for area replacement ratios of 31·7%. A comparison between identical drained and undrained tests indicated that the deviatoric stresses were higher in drained tests with the drained response representing an upper bound for the strength of the reinforced clay specimens. When the improvements observed in triaxial tests were compared with improvements witnessed in full-scale footing tests, the triaxial test results seemed to over predict the per cent improvement observed in the field bearing capacity.
- 1 August 2020
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Ground Improvement
- Vol. 173 (3) , 170-186
Drained triaxial response of clay reinforced with sand columns
In ground-improvement applications involving stone columns in soft clays, the columns act as drains that facilitate partial drainage during practical load applications. Partial drainage could improve the short-term strength of the clay/column composite. The objective of this work was to bracket the range of loading conditions by investigating the fully drained response of clay/column composites through consolidated drained triaxial tests. The area replacement ratio, the column penetration ratio and the presence of geotextile encasement were varied in the testing programme. A maximum improvement of 69% was observed in the deviatoric stress for area replacement ratios of 31·7%. A comparison between identical drained and undrained tests indicated that the deviatoric stresses were higher in drained tests with the drained response representing an upper bound for the strength of the reinforced clay specimens. When the improvements observed in triaxial tests were compared with improvements witnessed in full-scale footing tests, the triaxial test results seemed to over predict the per cent improvement observed in the field bearing capacity.
- 16 July 2020
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 38 (6) , 6623-6639
Importance of Lower-Bound Shear Strengths in the Reliability of Spatially Random Clayey Slopes
- 16 July 2020
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 38 (6) , 6623-6639
Importance of Lower-Bound Shear Strengths in the Reliability of Spatially Random Clayey Slopes