Sebahattin Serhat Turgut
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sebahattin Serhat Turgut has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Erkan Karacabey
Department of Food Engineering Suleyman Demirel University Isparta Turkey
10 shared publications Erkan Karacabey
Department of Food Engineering, Faculty of Engineering, Süleyman Demirel University, Isparta, Turkey
8 shared publications- Ayşe Özçelik
Department of Food Engineering Suleyman Demirel University Isparta Turkey
7 shared publications - Aberham Hailu Feyissa
Food Production Engineering Research Group (FPE), National Food Institute, Technical University of Denmark (DTU), 2800 Kongens Lyngby, Denmark
5 shared publications Erdogan Kucukoner
5 shared publications- Muhammed Mustafa Ozcelik
Department of Food Engineering Suleyman Demirel University Isparta Turkey
5 shared publications
Latest Publications
- Open Access
- 25 June 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (7)
Aqueous Phase Extraction of Caper Seed Protein by Ohmic Heating‐Assisted Enzymatic Technique: Assessment of Physicochemical Characteristics and Techno‐Functional Properties of Extracts
Plant‐based proteins derived from underutilized seeds have attracted increasing interest due to their nutritional and techno‐functional potential. In this study, protein extraction from defatted Capparis ovata L. seeds was optimized using an integrated ohmic heating assisted enzymatic extraction (OHA‐EE) approach, while conventional alkaline extraction (CAE) was applied as a control. Process parameters were optimized using response surface methodology (RSM), identifying voltage and extraction time as the key factors affecting extraction efficiency. The optimum conditions were identified as 500 V and 100.7 min, with predicted values of 58.73% protein recovery and 88.40% total protein ratio. Experimental validation yielded 61.49% protein recovery and 90.16% total protein ratio, confirming the adequacy of the developed model. Compared with CAE, OHA‐EE significantly increased total soluble protein content (54.44 and 21.11 g protein/100 g powder, respectively), protein recovery (61.49% and 55.08%, respectively), and protein enrichment (1.48‐ and 1.32‐fold, respectively) of extracts. Amino acid profiling revealed higher concentrations of essential amino acids and hydrophilic residues in OHA‐EE proteins, contributing to improved solubility. OHA‐EE also enhanced water‐holding capacity (2.20 and 1.09 g water g −1 powder, respectively), oil‐binding capacity (2.91 and 1.55 g oil g −1 powder, respectively), and emulsion stability (523.35 and 187.31 min, respectively). Furthermore, improved protein solubility was observed under both acidic and alkaline conditions. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) analyses confirmed extraction‐induced structural modifications and the formation of a more porous microstructure. Overall, the OHA‐EE method significantly improved protein recovery, structural characteristics, and techno‐functional performance. These findings demonstrate the potential of ohmic heating assisted enzymatic extraction for producing high‐quality plant protein powders and highlight the importance of comprehensive measurement and characterization in evaluating functional food ingredients.
- 25 June 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (7)
Open AccessAqueous Phase Extraction of Caper Seed Protein by Ohmic Heating‐Assisted Enzymatic Technique: Assessment of Physicochemical Characteristics and Techno‐Functional Properties of Extracts
Plant‐based proteins derived from underutilized seeds have attracted increasing interest due to their nutritional and techno‐functional potential. In this study, protein extraction from defatted Capparis ovata L. seeds was optimized using an integrated ohmic heating assisted enzymatic extraction (OHA‐EE) approach, while conventional alkaline extraction (CAE) was applied as a control. Process parameters were optimized using response surface methodology (RSM), identifying voltage and extraction time as the key factors affecting extraction efficiency. The optimum conditions were identified as 500 V and 100.7 min, with predicted values of 58.73% protein recovery and 88.40% total protein ratio. Experimental validation yielded 61.49% protein recovery and 90.16% total protein ratio, confirming the adequacy of the developed model. Compared with CAE, OHA‐EE significantly increased total soluble protein content (54.44 and 21.11 g protein/100 g powder, respectively), protein recovery (61.49% and 55.08%, respectively), and protein enrichment (1.48‐ and 1.32‐fold, respectively) of extracts. Amino acid profiling revealed higher concentrations of essential amino acids and hydrophilic residues in OHA‐EE proteins, contributing to improved solubility. OHA‐EE also enhanced water‐holding capacity (2.20 and 1.09 g water g −1 powder, respectively), oil‐binding capacity (2.91 and 1.55 g oil g −1 powder, respectively), and emulsion stability (523.35 and 187.31 min, respectively). Furthermore, improved protein solubility was observed under both acidic and alkaline conditions. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) analyses confirmed extraction‐induced structural modifications and the formation of a more porous microstructure. Overall, the OHA‐EE method significantly improved protein recovery, structural characteristics, and techno‐functional performance. These findings demonstrate the potential of ohmic heating assisted enzymatic extraction for producing high‐quality plant protein powders and highlight the importance of comprehensive measurement and characterization in evaluating functional food ingredients.
- 4 June 2026
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 17
Kapalı devre sirkülasyonlu ohmik ısıtma ve kesikli ultrason destekli ekstraksiyon kullanılarak kahve atıklarının değerlendirilmesi: Fenolik bileşiklerin geri kazanımı ve antioksidan aktivite potansiyelinin incelenmesi
Kahve, dünya genelinde en yaygın tüketilen içeceklerden biri olmasının yanı sıra önemli bir ticari emtiadır. Artan kahve tüketimi, üretim sürecinde biyoaktif bileşikler açısından zengin büyük miktarda atığın oluşmasına neden olmaktadır. Bu çalışmada, kahve atıklarının fenolik bileşiklerin geri kazanımı amacıyla ohmik ısıtma destekli ekstraksiyon (ODE) ve ultrason destekli ekstraksiyon (UDE) yöntemleri kullanılarak değerlendirilmesi incelenmiş; karşılaştırma amacıyla geleneksel katı–sıvı ekstraksiyonu (KSE) referans olarak alınmıştır. Kontrollü koşullar altında elde edilen ekstraktlarda toplam fenolik madde (TF) içeriği ile DPPH ve ABTS antioksidan aktiviteleri belirlenmiştir. Tüm ekstraksiyonlar, %50 (v/v) metanol çözeltisi kullanılarak 60°C’de 30 dakika süreyle ve 1:20 katı:sıvı oranında gerçekleştirilmiştir. ODE uygulamalarında 200 V potansiyel fark uygulanmış, konvektif kütle aktarımının etkisini değerlendirmek amacıyla çözücü 5 L/dk debide sirküle edilmiştir. Kapalı devre çalışma için geliştirilen kartuş sisteminin ekstraksiyon verimliliğine etkisi de incelenmiştir. En yüksek TF geri kazanımı metanol kullanılan ODE ile elde edilirken, en yüksek ABTS aktivitesi metanol bazlı UDE’de gözlenmiştir. Çözücü sirkülasyonu ekstraksiyon verimini artırmış, kartuş kullanımı ise kütle aktarımını sınırlandırmıştır. Sonuçlar, ODE ve UDE yöntemlerinin kahve atıklarının katma değeri yüksek doğal antioksidan kaynaklarına dönüştürülmesinde etkili yaklaşımlar olduğunu göstermektedir.
- 4 June 2026
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 17
Kapalı devre sirkülasyonlu ohmik ısıtma ve kesikli ultrason destekli ekstraksiyon kullanılarak kahve atıklarının değerlendirilmesi: Fenolik bileşiklerin geri kazanımı ve antioksidan aktivite potansiyelinin incelenmesi
Kahve, dünya genelinde en yaygın tüketilen içeceklerden biri olmasının yanı sıra önemli bir ticari emtiadır. Artan kahve tüketimi, üretim sürecinde biyoaktif bileşikler açısından zengin büyük miktarda atığın oluşmasına neden olmaktadır. Bu çalışmada, kahve atıklarının fenolik bileşiklerin geri kazanımı amacıyla ohmik ısıtma destekli ekstraksiyon (ODE) ve ultrason destekli ekstraksiyon (UDE) yöntemleri kullanılarak değerlendirilmesi incelenmiş; karşılaştırma amacıyla geleneksel katı–sıvı ekstraksiyonu (KSE) referans olarak alınmıştır. Kontrollü koşullar altında elde edilen ekstraktlarda toplam fenolik madde (TF) içeriği ile DPPH ve ABTS antioksidan aktiviteleri belirlenmiştir. Tüm ekstraksiyonlar, %50 (v/v) metanol çözeltisi kullanılarak 60°C’de 30 dakika süreyle ve 1:20 katı:sıvı oranında gerçekleştirilmiştir. ODE uygulamalarında 200 V potansiyel fark uygulanmış, konvektif kütle aktarımının etkisini değerlendirmek amacıyla çözücü 5 L/dk debide sirküle edilmiştir. Kapalı devre çalışma için geliştirilen kartuş sisteminin ekstraksiyon verimliliğine etkisi de incelenmiştir. En yüksek TF geri kazanımı metanol kullanılan ODE ile elde edilirken, en yüksek ABTS aktivitesi metanol bazlı UDE’de gözlenmiştir. Çözücü sirkülasyonu ekstraksiyon verimini artırmış, kartuş kullanımı ise kütle aktarımını sınırlandırmıştır. Sonuçlar, ODE ve UDE yöntemlerinin kahve atıklarının katma değeri yüksek doğal antioksidan kaynaklarına dönüştürülmesinde etkili yaklaşımlar olduğunu göstermektedir.
- Open Access
- 24 April 2026
- Published by Springer Nature in Food and Bioprocess Technology
- Vol. 19 (6) , 287
Techno-Functional and Physicochemical Properties of Caper Seed Protein: A Comparative Study of Extraction Methods
This study investigates the valorization of Capparis ovata seeds as a sustainable source of high-quality plant protein. Protein powders were produced via four extraction methods: standard alkaline (CAE), enzyme-assisted (EAE), ohmic heating-assisted (ODE), and a combined ohmic heating-enzyme-assisted process (CODE-EE). Structural characterization using FTIR and SEM revealed preserved protein conformations and distinct morphological features across methods. SDS-PAGE analysis indicated molecular weights of 19–47 kDa. Amino acid profiling demonstrated high levels of essential amino acids, including isoleucine, leucine, lysine, tryptophan, glutamic acid, and arginine, with ohmic heating and enzyme treatments enhancing their abundance. The extraction method significantly influenced techno-functional properties: CODE exhibited the highest water-holding and oil-holding capacities (WHC: 3.18 g/g; OBC: 3.64 g/g), CODE and CODE-EE achieved maximal foaming capacity (110.0% ± 2.0 and 109.0% ± 1.0), and CODE-EE showed superior emulsifying activity and stability, whereas CAE displayed the lowest performance. The exciting potential of caper seeds as a valuable plant-based protein source is demonstrated by this study, which also reveals how the CODE-EE process efficiently yields protein powder with a high protein content and superior functional qualities.
- 24 April 2026
- Published by Springer Nature in Food and Bioprocess Technology
- Vol. 19 (6) , 287
Open AccessTechno-Functional and Physicochemical Properties of Caper Seed Protein: A Comparative Study of Extraction Methods
This study investigates the valorization of Capparis ovata seeds as a sustainable source of high-quality plant protein. Protein powders were produced via four extraction methods: standard alkaline (CAE), enzyme-assisted (EAE), ohmic heating-assisted (ODE), and a combined ohmic heating-enzyme-assisted process (CODE-EE). Structural characterization using FTIR and SEM revealed preserved protein conformations and distinct morphological features across methods. SDS-PAGE analysis indicated molecular weights of 19–47 kDa. Amino acid profiling demonstrated high levels of essential amino acids, including isoleucine, leucine, lysine, tryptophan, glutamic acid, and arginine, with ohmic heating and enzyme treatments enhancing their abundance. The extraction method significantly influenced techno-functional properties: CODE exhibited the highest water-holding and oil-holding capacities (WHC: 3.18 g/g; OBC: 3.64 g/g), CODE and CODE-EE achieved maximal foaming capacity (110.0% ± 2.0 and 109.0% ± 1.0), and CODE-EE showed superior emulsifying activity and stability, whereas CAE displayed the lowest performance. The exciting potential of caper seeds as a valuable plant-based protein source is demonstrated by this study, which also reveals how the CODE-EE process efficiently yields protein powder with a high protein content and superior functional qualities.
- 12 December 2024
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 12 (s2)
Antep Fıstığında Bezelye ve Ispanak Tağşişinin Düşük Maliyetli Spektral Sensör Kullanılarak Tespiti
Antep fıstığı, başta baklava olmak üzere birçok tatlıda sıkça kullanılan bir üründür. Özellikle öğütülmüş Antep fıstığı, talebin yüksek olması ve yüksek maliyeti nedeniyle sıklıkla tağşişe maruz kalmaktadır. Yeşil bezelye ve ıspanak, organoleptik özellikleri, renk benzerliği ve ucuzluğu nedeniyle Antep fıstığı ile karıştırılarak en çok sahtecilik gerçekleştirilen ürünler arasındadır. Ancak bu ürünlerin öğütülmüş Antep fıstığına belirli oranlarda karıştırılması durumunda sahteciliğin hızlı ve yerinde tespiti, gözle muayene gibi yöntemlerle çoğu zaman mümkün olmamaktadır. Bu nedenle mevcut çalışma, Antep fıstığındaki yeşil bezelye ve ıspanak tağşişinin, düşük maliyetli bir spektral sensör teknolojisi ve kemometrik yöntemler kullanılarak tespitini amaçlamaktadır. Bu kapsamda yeşil bezelye ve ıspanak örnekleri Antep fıstığı ile %5-50 (a/a) arasındaki konsantrasyonlarda %5’lik artışlarla karıştırılmıştır. Saf Antep fıstığı ve karışık numunelerin reflektans spektrumları 410-940 nm arasında elde edilmiştir. Numunelerdeki sahtecilik oranlarının tespiti amacıyla geliştirilen modelin eğitilmesinde derin öğrenme yöntemi kullanılmıştır. Modele beslenen verilerde boyut indirgeme amacıyla Temel Bileşenler Analizinden faydalanılmış olup, regresyon probleminin uyum iyiliğini test etmek amacıyla belirleme katsayısı (R2), hata kareler ortalamasının karekökü (RMSE) ve artıklık tahminsel sapma (RPD) istatistikleri kullanılmıştır. Sırasıyla eğitim, doğrulama ve test verileri için R2 0,85, 0,83 ve 0,80; RMSE 5,81, 6,13 ve 6,71; RPD 2,55, 2,44 ve 2,21 olarak tespit edilmiştir. Elde edilen bulgular neticesinde, söz konusu ekonomik spektral sensör ve geliştirilen kemometrik yöntemin Antep fıstığında özellikle %10 üzerindeki yeşil bezelye ve ıspanak tağşiş oranının belirlenmesi için tahribatsız, hızlı ve kolay bir yöntem olarak kullanılma potansiyeline sahip olduğu ortaya konmuştur.
- 12 December 2024
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 12 (s2)
Antep Fıstığında Bezelye ve Ispanak Tağşişinin Düşük Maliyetli Spektral Sensör Kullanılarak Tespiti
Antep fıstığı, başta baklava olmak üzere birçok tatlıda sıkça kullanılan bir üründür. Özellikle öğütülmüş Antep fıstığı, talebin yüksek olması ve yüksek maliyeti nedeniyle sıklıkla tağşişe maruz kalmaktadır. Yeşil bezelye ve ıspanak, organoleptik özellikleri, renk benzerliği ve ucuzluğu nedeniyle Antep fıstığı ile karıştırılarak en çok sahtecilik gerçekleştirilen ürünler arasındadır. Ancak bu ürünlerin öğütülmüş Antep fıstığına belirli oranlarda karıştırılması durumunda sahteciliğin hızlı ve yerinde tespiti, gözle muayene gibi yöntemlerle çoğu zaman mümkün olmamaktadır. Bu nedenle mevcut çalışma, Antep fıstığındaki yeşil bezelye ve ıspanak tağşişinin, düşük maliyetli bir spektral sensör teknolojisi ve kemometrik yöntemler kullanılarak tespitini amaçlamaktadır. Bu kapsamda yeşil bezelye ve ıspanak örnekleri Antep fıstığı ile %5-50 (a/a) arasındaki konsantrasyonlarda %5’lik artışlarla karıştırılmıştır. Saf Antep fıstığı ve karışık numunelerin reflektans spektrumları 410-940 nm arasında elde edilmiştir. Numunelerdeki sahtecilik oranlarının tespiti amacıyla geliştirilen modelin eğitilmesinde derin öğrenme yöntemi kullanılmıştır. Modele beslenen verilerde boyut indirgeme amacıyla Temel Bileşenler Analizinden faydalanılmış olup, regresyon probleminin uyum iyiliğini test etmek amacıyla belirleme katsayısı (R2), hata kareler ortalamasının karekökü (RMSE) ve artıklık tahminsel sapma (RPD) istatistikleri kullanılmıştır. Sırasıyla eğitim, doğrulama ve test verileri için R2 0,85, 0,83 ve 0,80; RMSE 5,81, 6,13 ve 6,71; RPD 2,55, 2,44 ve 2,21 olarak tespit edilmiştir. Elde edilen bulgular neticesinde, söz konusu ekonomik spektral sensör ve geliştirilen kemometrik yöntemin Antep fıstığında özellikle %10 üzerindeki yeşil bezelye ve ıspanak tağşiş oranının belirlenmesi için tahribatsız, hızlı ve kolay bir yöntem olarak kullanılma potansiyeline sahip olduğu ortaya konmuştur.
- Open Access
- 14 August 2024
- Published by Elsevier in Food Control
- Vol. 167
Low-cost multispectral sensor reveals cold chain breaks, meat type, and storage time in chicken meat samples
- 14 August 2024
- Published by Elsevier in Food Control
- Vol. 167
Open AccessLow-cost multispectral sensor reveals cold chain breaks, meat type, and storage time in chicken meat samples
- Open Access
- 18 January 2024
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 2024, 1-18
Probabilistic-Mechanistic Evaluation of a Hybrid Drying System Using l1 Norm Regularisation: Simultaneous Ohmic Heating and Convection Drying
Ohmic-assisted drying (OAD) is a novel drying system that combines ohmic heating and convection drying simultaneously. The present study is aimed at evaluating the mechanism of OAD system behaviours against the combined impact of operational and model uncertainties. Moreover, the dynamic (time-dependent), as well as static (end-of-drying) spatial homogeneity of the model predictions, was quantitatively described for the first time in the literature using Buzas and Gibson’s evenness value (an -diversity index). The Monte Carlo simulation approach was used to propagate the uncertainty of randomly selected input variables using the Halton sequence sampling method. Mechanistic models include input uncertainties that lead to deviations in model estimations. Both time-dependent and independent global sensitivity of moisture, sample temperature, sample’s internal pressure, their spatial homogeneity, and drying time were assessed using Lasso regression (a variable selection method that penalises the coefficients using norm). The stochastic results of the mechanistic investigation showed that the effects of the input variables are almost identical both as static and time-dependent variables. Lasso regression results indicated that operational and model uncertainties cause varying changes in the magnitude and direction of the stochastic model predictions throughout the process. By contrast, the homogeneity properties of the dry product are not caused by these variations and heterogeneous distribution of the electric field. Additionally, electrical conductivity, oven temperature, applied voltage, and initial moisture were found to be the variables which have the most significant effect on all the variables which were examined in terms of operational and model uncertainties. Practical Applications. The present study investigates the stochastic behaviour of the OAD system through the mechanistic model and using a probabilistic modelling approach. To the best of our knowledge, in addition to being the first study to probabilistically evaluate the OAD system, we are introducing Buzas and Gibson’s evenness value for the first time in the food science/technology literature. This measure serves as a numerical indicator of the spatial distribution homogeneity of the physical properties of the sample. The study’s findings and proposed methodologies will have further applications not only for researchers but also for manufacturers, particularly for those involved in the design and analysis of new drying and food systems in general. Moreover, the presented methods and novel homogeneity measures are generic tools; they can be easily adapted to other process improvement practices involving input/output uncertainty/variability.
- 18 January 2024
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 2024, 1-18
Open AccessProbabilistic-Mechanistic Evaluation of a Hybrid Drying System Using l1 Norm Regularisation: Simultaneous Ohmic Heating and Convection Drying
Ohmic-assisted drying (OAD) is a novel drying system that combines ohmic heating and convection drying simultaneously. The present study is aimed at evaluating the mechanism of OAD system behaviours against the combined impact of operational and model uncertainties. Moreover, the dynamic (time-dependent), as well as static (end-of-drying) spatial homogeneity of the model predictions, was quantitatively described for the first time in the literature using Buzas and Gibson’s evenness value (an -diversity index). The Monte Carlo simulation approach was used to propagate the uncertainty of randomly selected input variables using the Halton sequence sampling method. Mechanistic models include input uncertainties that lead to deviations in model estimations. Both time-dependent and independent global sensitivity of moisture, sample temperature, sample’s internal pressure, their spatial homogeneity, and drying time were assessed using Lasso regression (a variable selection method that penalises the coefficients using norm). The stochastic results of the mechanistic investigation showed that the effects of the input variables are almost identical both as static and time-dependent variables. Lasso regression results indicated that operational and model uncertainties cause varying changes in the magnitude and direction of the stochastic model predictions throughout the process. By contrast, the homogeneity properties of the dry product are not caused by these variations and heterogeneous distribution of the electric field. Additionally, electrical conductivity, oven temperature, applied voltage, and initial moisture were found to be the variables which have the most significant effect on all the variables which were examined in terms of operational and model uncertainties. Practical Applications. The present study investigates the stochastic behaviour of the OAD system through the mechanistic model and using a probabilistic modelling approach. To the best of our knowledge, in addition to being the first study to probabilistically evaluate the OAD system, we are introducing Buzas and Gibson’s evenness value for the first time in the food science/technology literature. This measure serves as a numerical indicator of the spatial distribution homogeneity of the physical properties of the sample. The study’s findings and proposed methodologies will have further applications not only for researchers but also for manufacturers, particularly for those involved in the design and analysis of new drying and food systems in general. Moreover, the presented methods and novel homogeneity measures are generic tools; they can be easily adapted to other process improvement practices involving input/output uncertainty/variability.
- 16 November 2023
- Published by Walter de Gruyter GmbH in International Journal of Food Engineering
- Vol. 19 (12) , 593-604
Stochastic inactivation evaluation of foodborne pathogens during ohmic heating of poultry meat
The objective of this study is to stochastically assess the inactivation probabilities of four common foodborne pathogens ( Listeria , Salmonella , Escherichia coli , and Campylobacter ) in chicken meat during ohmic heating (OH) in a salt solution. A mechanistic model was used to accomplish this, coupling heat transfer, laminar fluid flow, and the electric field, and solved numerically using COMSOL Multiphysics ® v5.6. The 3D model represented 1000 particles randomly placed on the meat’s surface to determine the 7-log reduction of bacterial load probability. These particles are virtual representatives of bacterial colonies in the model. The influence of uncertain input parameters (specific heat capacity and electrical conductivity) and OH conditions (salt concentration of the heating medium, applied voltage, and heating time) was explained using logistic regression. The same analysis was repeated for the slowest heating point of chicken meat, as well. According to the findings, cold spots are observed at the corners of the meat piece during OH, requiring additional attention to the meat surface temperature to prevent under-processing. Sensitivity analysis revealed that the applied voltage and brine concentration are the main factors affecting the inactivation probabilities of pathogenic bacterial cells on the chicken meat surface. Salmonella and Listeria may require higher electrical conductivity of chicken meat and longer processing times. The developed model enables predicting inactivation probabilities of microorganisms that can be found on the outer surface by measuring the core temperature of the meat. However, especially for bacteria with higher heat resistance, it is better to consider the cold spot temperature found in the corners of the food material during OH.
- 16 November 2023
- Published by Walter de Gruyter GmbH in International Journal of Food Engineering
- Vol. 19 (12) , 593-604
Stochastic inactivation evaluation of foodborne pathogens during ohmic heating of poultry meat
The objective of this study is to stochastically assess the inactivation probabilities of four common foodborne pathogens ( Listeria , Salmonella , Escherichia coli , and Campylobacter ) in chicken meat during ohmic heating (OH) in a salt solution. A mechanistic model was used to accomplish this, coupling heat transfer, laminar fluid flow, and the electric field, and solved numerically using COMSOL Multiphysics ® v5.6. The 3D model represented 1000 particles randomly placed on the meat’s surface to determine the 7-log reduction of bacterial load probability. These particles are virtual representatives of bacterial colonies in the model. The influence of uncertain input parameters (specific heat capacity and electrical conductivity) and OH conditions (salt concentration of the heating medium, applied voltage, and heating time) was explained using logistic regression. The same analysis was repeated for the slowest heating point of chicken meat, as well. According to the findings, cold spots are observed at the corners of the meat piece during OH, requiring additional attention to the meat surface temperature to prevent under-processing. Sensitivity analysis revealed that the applied voltage and brine concentration are the main factors affecting the inactivation probabilities of pathogenic bacterial cells on the chicken meat surface. Salmonella and Listeria may require higher electrical conductivity of chicken meat and longer processing times. The developed model enables predicting inactivation probabilities of microorganisms that can be found on the outer surface by measuring the core temperature of the meat. However, especially for bacteria with higher heat resistance, it is better to consider the cold spot temperature found in the corners of the food material during OH.
- 27 October 2023
- Published by Elsevier
- p. 347-396
Design and simulation of extraction systems in the food industry
- 27 October 2023
- Published by Elsevier
- p. 347-396
Design and simulation of extraction systems in the food industry