Muhammed Mustafa Ozcelik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Muhammed Mustafa Ozcelik has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Gülcan Özkan
Süleyman Demirel Üniversitesi
5 shared publications - Sebahattin Serhat Turgut
Department of Food Engineering Suleyman Demirel University Isparta Turkey
5 shared publications - Ayşe Özçelik
Department of Food Engineering Suleyman Demirel University Isparta Turkey
4 shared publications - Erkan Karacabey
Department of Food Engineering Suleyman Demirel University Isparta Turkey
4 shared publications - Bekir Gökçen Mazı
Department of Food Engineering Ordu University Ordu Turkey
3 shared publications - Ebru Aydin
Süleyman Demirel Üniversitesi
3 shared publications
Latest Publications
- Open Access
- 25 June 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (7)
Aqueous Phase Extraction of Caper Seed Protein by Ohmic Heating‐Assisted Enzymatic Technique: Assessment of Physicochemical Characteristics and Techno‐Functional Properties of Extracts
Plant‐based proteins derived from underutilized seeds have attracted increasing interest due to their nutritional and techno‐functional potential. In this study, protein extraction from defatted Capparis ovata L. seeds was optimized using an integrated ohmic heating assisted enzymatic extraction (OHA‐EE) approach, while conventional alkaline extraction (CAE) was applied as a control. Process parameters were optimized using response surface methodology (RSM), identifying voltage and extraction time as the key factors affecting extraction efficiency. The optimum conditions were identified as 500 V and 100.7 min, with predicted values of 58.73% protein recovery and 88.40% total protein ratio. Experimental validation yielded 61.49% protein recovery and 90.16% total protein ratio, confirming the adequacy of the developed model. Compared with CAE, OHA‐EE significantly increased total soluble protein content (54.44 and 21.11 g protein/100 g powder, respectively), protein recovery (61.49% and 55.08%, respectively), and protein enrichment (1.48‐ and 1.32‐fold, respectively) of extracts. Amino acid profiling revealed higher concentrations of essential amino acids and hydrophilic residues in OHA‐EE proteins, contributing to improved solubility. OHA‐EE also enhanced water‐holding capacity (2.20 and 1.09 g water g −1 powder, respectively), oil‐binding capacity (2.91 and 1.55 g oil g −1 powder, respectively), and emulsion stability (523.35 and 187.31 min, respectively). Furthermore, improved protein solubility was observed under both acidic and alkaline conditions. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) analyses confirmed extraction‐induced structural modifications and the formation of a more porous microstructure. Overall, the OHA‐EE method significantly improved protein recovery, structural characteristics, and techno‐functional performance. These findings demonstrate the potential of ohmic heating assisted enzymatic extraction for producing high‐quality plant protein powders and highlight the importance of comprehensive measurement and characterization in evaluating functional food ingredients.
- 25 June 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (7)
Open AccessAqueous Phase Extraction of Caper Seed Protein by Ohmic Heating‐Assisted Enzymatic Technique: Assessment of Physicochemical Characteristics and Techno‐Functional Properties of Extracts
Plant‐based proteins derived from underutilized seeds have attracted increasing interest due to their nutritional and techno‐functional potential. In this study, protein extraction from defatted Capparis ovata L. seeds was optimized using an integrated ohmic heating assisted enzymatic extraction (OHA‐EE) approach, while conventional alkaline extraction (CAE) was applied as a control. Process parameters were optimized using response surface methodology (RSM), identifying voltage and extraction time as the key factors affecting extraction efficiency. The optimum conditions were identified as 500 V and 100.7 min, with predicted values of 58.73% protein recovery and 88.40% total protein ratio. Experimental validation yielded 61.49% protein recovery and 90.16% total protein ratio, confirming the adequacy of the developed model. Compared with CAE, OHA‐EE significantly increased total soluble protein content (54.44 and 21.11 g protein/100 g powder, respectively), protein recovery (61.49% and 55.08%, respectively), and protein enrichment (1.48‐ and 1.32‐fold, respectively) of extracts. Amino acid profiling revealed higher concentrations of essential amino acids and hydrophilic residues in OHA‐EE proteins, contributing to improved solubility. OHA‐EE also enhanced water‐holding capacity (2.20 and 1.09 g water g −1 powder, respectively), oil‐binding capacity (2.91 and 1.55 g oil g −1 powder, respectively), and emulsion stability (523.35 and 187.31 min, respectively). Furthermore, improved protein solubility was observed under both acidic and alkaline conditions. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) analyses confirmed extraction‐induced structural modifications and the formation of a more porous microstructure. Overall, the OHA‐EE method significantly improved protein recovery, structural characteristics, and techno‐functional performance. These findings demonstrate the potential of ohmic heating assisted enzymatic extraction for producing high‐quality plant protein powders and highlight the importance of comprehensive measurement and characterization in evaluating functional food ingredients.
- Open Access
- 24 April 2026
- Published by Springer Nature in Food and Bioprocess Technology
- Vol. 19 (6) , 287
Techno-Functional and Physicochemical Properties of Caper Seed Protein: A Comparative Study of Extraction Methods
This study investigates the valorization of Capparis ovata seeds as a sustainable source of high-quality plant protein. Protein powders were produced via four extraction methods: standard alkaline (CAE), enzyme-assisted (EAE), ohmic heating-assisted (ODE), and a combined ohmic heating-enzyme-assisted process (CODE-EE). Structural characterization using FTIR and SEM revealed preserved protein conformations and distinct morphological features across methods. SDS-PAGE analysis indicated molecular weights of 19–47 kDa. Amino acid profiling demonstrated high levels of essential amino acids, including isoleucine, leucine, lysine, tryptophan, glutamic acid, and arginine, with ohmic heating and enzyme treatments enhancing their abundance. The extraction method significantly influenced techno-functional properties: CODE exhibited the highest water-holding and oil-holding capacities (WHC: 3.18 g/g; OBC: 3.64 g/g), CODE and CODE-EE achieved maximal foaming capacity (110.0% ± 2.0 and 109.0% ± 1.0), and CODE-EE showed superior emulsifying activity and stability, whereas CAE displayed the lowest performance. The exciting potential of caper seeds as a valuable plant-based protein source is demonstrated by this study, which also reveals how the CODE-EE process efficiently yields protein powder with a high protein content and superior functional qualities.
- 24 April 2026
- Published by Springer Nature in Food and Bioprocess Technology
- Vol. 19 (6) , 287
Open AccessTechno-Functional and Physicochemical Properties of Caper Seed Protein: A Comparative Study of Extraction Methods
This study investigates the valorization of Capparis ovata seeds as a sustainable source of high-quality plant protein. Protein powders were produced via four extraction methods: standard alkaline (CAE), enzyme-assisted (EAE), ohmic heating-assisted (ODE), and a combined ohmic heating-enzyme-assisted process (CODE-EE). Structural characterization using FTIR and SEM revealed preserved protein conformations and distinct morphological features across methods. SDS-PAGE analysis indicated molecular weights of 19–47 kDa. Amino acid profiling demonstrated high levels of essential amino acids, including isoleucine, leucine, lysine, tryptophan, glutamic acid, and arginine, with ohmic heating and enzyme treatments enhancing their abundance. The extraction method significantly influenced techno-functional properties: CODE exhibited the highest water-holding and oil-holding capacities (WHC: 3.18 g/g; OBC: 3.64 g/g), CODE and CODE-EE achieved maximal foaming capacity (110.0% ± 2.0 and 109.0% ± 1.0), and CODE-EE showed superior emulsifying activity and stability, whereas CAE displayed the lowest performance. The exciting potential of caper seeds as a valuable plant-based protein source is demonstrated by this study, which also reveals how the CODE-EE process efficiently yields protein powder with a high protein content and superior functional qualities.
- 12 December 2024
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 12 (s2)
Antep Fıstığında Bezelye ve Ispanak Tağşişinin Düşük Maliyetli Spektral Sensör Kullanılarak Tespiti
Antep fıstığı, başta baklava olmak üzere birçok tatlıda sıkça kullanılan bir üründür. Özellikle öğütülmüş Antep fıstığı, talebin yüksek olması ve yüksek maliyeti nedeniyle sıklıkla tağşişe maruz kalmaktadır. Yeşil bezelye ve ıspanak, organoleptik özellikleri, renk benzerliği ve ucuzluğu nedeniyle Antep fıstığı ile karıştırılarak en çok sahtecilik gerçekleştirilen ürünler arasındadır. Ancak bu ürünlerin öğütülmüş Antep fıstığına belirli oranlarda karıştırılması durumunda sahteciliğin hızlı ve yerinde tespiti, gözle muayene gibi yöntemlerle çoğu zaman mümkün olmamaktadır. Bu nedenle mevcut çalışma, Antep fıstığındaki yeşil bezelye ve ıspanak tağşişinin, düşük maliyetli bir spektral sensör teknolojisi ve kemometrik yöntemler kullanılarak tespitini amaçlamaktadır. Bu kapsamda yeşil bezelye ve ıspanak örnekleri Antep fıstığı ile %5-50 (a/a) arasındaki konsantrasyonlarda %5’lik artışlarla karıştırılmıştır. Saf Antep fıstığı ve karışık numunelerin reflektans spektrumları 410-940 nm arasında elde edilmiştir. Numunelerdeki sahtecilik oranlarının tespiti amacıyla geliştirilen modelin eğitilmesinde derin öğrenme yöntemi kullanılmıştır. Modele beslenen verilerde boyut indirgeme amacıyla Temel Bileşenler Analizinden faydalanılmış olup, regresyon probleminin uyum iyiliğini test etmek amacıyla belirleme katsayısı (R2), hata kareler ortalamasının karekökü (RMSE) ve artıklık tahminsel sapma (RPD) istatistikleri kullanılmıştır. Sırasıyla eğitim, doğrulama ve test verileri için R2 0,85, 0,83 ve 0,80; RMSE 5,81, 6,13 ve 6,71; RPD 2,55, 2,44 ve 2,21 olarak tespit edilmiştir. Elde edilen bulgular neticesinde, söz konusu ekonomik spektral sensör ve geliştirilen kemometrik yöntemin Antep fıstığında özellikle %10 üzerindeki yeşil bezelye ve ıspanak tağşiş oranının belirlenmesi için tahribatsız, hızlı ve kolay bir yöntem olarak kullanılma potansiyeline sahip olduğu ortaya konmuştur.
- 12 December 2024
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 12 (s2)
Antep Fıstığında Bezelye ve Ispanak Tağşişinin Düşük Maliyetli Spektral Sensör Kullanılarak Tespiti
Antep fıstığı, başta baklava olmak üzere birçok tatlıda sıkça kullanılan bir üründür. Özellikle öğütülmüş Antep fıstığı, talebin yüksek olması ve yüksek maliyeti nedeniyle sıklıkla tağşişe maruz kalmaktadır. Yeşil bezelye ve ıspanak, organoleptik özellikleri, renk benzerliği ve ucuzluğu nedeniyle Antep fıstığı ile karıştırılarak en çok sahtecilik gerçekleştirilen ürünler arasındadır. Ancak bu ürünlerin öğütülmüş Antep fıstığına belirli oranlarda karıştırılması durumunda sahteciliğin hızlı ve yerinde tespiti, gözle muayene gibi yöntemlerle çoğu zaman mümkün olmamaktadır. Bu nedenle mevcut çalışma, Antep fıstığındaki yeşil bezelye ve ıspanak tağşişinin, düşük maliyetli bir spektral sensör teknolojisi ve kemometrik yöntemler kullanılarak tespitini amaçlamaktadır. Bu kapsamda yeşil bezelye ve ıspanak örnekleri Antep fıstığı ile %5-50 (a/a) arasındaki konsantrasyonlarda %5’lik artışlarla karıştırılmıştır. Saf Antep fıstığı ve karışık numunelerin reflektans spektrumları 410-940 nm arasında elde edilmiştir. Numunelerdeki sahtecilik oranlarının tespiti amacıyla geliştirilen modelin eğitilmesinde derin öğrenme yöntemi kullanılmıştır. Modele beslenen verilerde boyut indirgeme amacıyla Temel Bileşenler Analizinden faydalanılmış olup, regresyon probleminin uyum iyiliğini test etmek amacıyla belirleme katsayısı (R2), hata kareler ortalamasının karekökü (RMSE) ve artıklık tahminsel sapma (RPD) istatistikleri kullanılmıştır. Sırasıyla eğitim, doğrulama ve test verileri için R2 0,85, 0,83 ve 0,80; RMSE 5,81, 6,13 ve 6,71; RPD 2,55, 2,44 ve 2,21 olarak tespit edilmiştir. Elde edilen bulgular neticesinde, söz konusu ekonomik spektral sensör ve geliştirilen kemometrik yöntemin Antep fıstığında özellikle %10 üzerindeki yeşil bezelye ve ıspanak tağşiş oranının belirlenmesi için tahribatsız, hızlı ve kolay bir yöntem olarak kullanılma potansiyeline sahip olduğu ortaya konmuştur.
- 2 May 2024
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 18 (6) , 4703-4717
Optimization of high-phenolic European cranberrybush juice powder production using hybrid microwave hot air-drying: a novel approach for enhanced preservation and efficiency in food processing
- 2 May 2024
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 18 (6) , 4703-4717
Optimization of high-phenolic European cranberrybush juice powder production using hybrid microwave hot air-drying: a novel approach for enhanced preservation and efficiency in food processing
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Brazilian Archives of Biology and Technology
- Vol. 67, e24230018
Production of Encapsulated Hydrogel Beads and Sugar-Free Beverage from Gilaburu Fruit Rich in Antioxidants, Antidiabetic Bioactives, and its Microwave-Assisted Extraction Optimization
The study aimed to optimize microwave-assisted extraction (MAE) of phenolics from gilaburu fruit (GF) with the response surface method (RSM). GF was used to produce two functional products: The first one was encapsulated hydrogel beads GF (eGF) using ionic gelation and chitosan system, and the second one was a sugar-free functional beverage (FB) enriched with black carrot, riboflavin, and ascorbic acid. The optimal extraction conditions were determined to be 60 °C for temperature, 5 minutes for time, and 4.18 g/100 mL for solid/solvent ratio based on the highest total phenolic content (TPC) and extraction yield. The model was found to be sufficient for the successful prediction of experimental results. Chlorogenic acid was a major compound of GF, eGF, and sugar-free FB. The inhibition of α-glucosidase activity (%) for GF, eGF, and sugar-free FB was detected as 54, 92, and 77, respectively. These findings revealed that utilizing MAE may shorten the extraction of GF phenolics with low energy and maximum efficiency. Furthermore, GF, eGF, and sugar-free FB have promising antioxidant and antidiabetic activities due to their rich bioactive and fortified compounds. They may be regarded excellent sources of compounds for the functional food industry. Besides, they can be used to provide health benefits to diabetic patients and future consumers.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Brazilian Archives of Biology and Technology
- Vol. 67, e24230018
Open AccessProduction of Encapsulated Hydrogel Beads and Sugar-Free Beverage from Gilaburu Fruit Rich in Antioxidants, Antidiabetic Bioactives, and its Microwave-Assisted Extraction Optimization
The study aimed to optimize microwave-assisted extraction (MAE) of phenolics from gilaburu fruit (GF) with the response surface method (RSM). GF was used to produce two functional products: The first one was encapsulated hydrogel beads GF (eGF) using ionic gelation and chitosan system, and the second one was a sugar-free functional beverage (FB) enriched with black carrot, riboflavin, and ascorbic acid. The optimal extraction conditions were determined to be 60 °C for temperature, 5 minutes for time, and 4.18 g/100 mL for solid/solvent ratio based on the highest total phenolic content (TPC) and extraction yield. The model was found to be sufficient for the successful prediction of experimental results. Chlorogenic acid was a major compound of GF, eGF, and sugar-free FB. The inhibition of α-glucosidase activity (%) for GF, eGF, and sugar-free FB was detected as 54, 92, and 77, respectively. These findings revealed that utilizing MAE may shorten the extraction of GF phenolics with low energy and maximum efficiency. Furthermore, GF, eGF, and sugar-free FB have promising antioxidant and antidiabetic activities due to their rich bioactive and fortified compounds. They may be regarded excellent sources of compounds for the functional food industry. Besides, they can be used to provide health benefits to diabetic patients and future consumers.
- Open Access
- 28 September 2023
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 11 (3) , 966-975
KAYISI ÇEKİRDEĞİNİN YAĞ VERİMİ VE FİZİKOKİMYASAL ÖZELLİKLERİ ÜZERİNDE GELENEKSEL VE YEŞİL EKSTRAKSİYON YÖNTEMLERİNİN KARŞILAŞTIRMALI İNCELENMESİ
Apricot kernel is a byproduct of fruit processing that is used for nuts but has a high economic value due to its high oil content. The aim of this research was to compare the green extraction techniques microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) with the traditional Soxhlet extraction method (SXHE). Time (min), amplitude (%), and temperature (°C) in the UAE method, power (W) and, time (min) in the MAE method, and time (min) in the SXHE method were used as oil extraction process parameters. The time required to achieve the oil yield similar to SXHE (43.65%) is 79% and 83% less in UAE and MAE methods, respectively. Extraction methods are ranked as UAE>MAE>SXHE when they are compared in terms of low free fatty acid (FFA), peroxide value (PV), and Delta-K, high antioxidant activity and total phenolic content (TPC), fatty acid composition, and accelerated shelf-life test (up to 20 days). However, after the 20th day of the shelf-life test, this ranking changes as UAE>SXHE>MAE. The UAE method had better results than MAE and SXHE methods due to same oil yield and higher functional oil content, especially at low extraction temperatures, and should be recommended for oil extraction from different kernels in the food industry.
- 28 September 2023
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 11 (3) , 966-975
Open AccessKAYISI ÇEKİRDEĞİNİN YAĞ VERİMİ VE FİZİKOKİMYASAL ÖZELLİKLERİ ÜZERİNDE GELENEKSEL VE YEŞİL EKSTRAKSİYON YÖNTEMLERİNİN KARŞILAŞTIRMALI İNCELENMESİ
Apricot kernel is a byproduct of fruit processing that is used for nuts but has a high economic value due to its high oil content. The aim of this research was to compare the green extraction techniques microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) with the traditional Soxhlet extraction method (SXHE). Time (min), amplitude (%), and temperature (°C) in the UAE method, power (W) and, time (min) in the MAE method, and time (min) in the SXHE method were used as oil extraction process parameters. The time required to achieve the oil yield similar to SXHE (43.65%) is 79% and 83% less in UAE and MAE methods, respectively. Extraction methods are ranked as UAE>MAE>SXHE when they are compared in terms of low free fatty acid (FFA), peroxide value (PV), and Delta-K, high antioxidant activity and total phenolic content (TPC), fatty acid composition, and accelerated shelf-life test (up to 20 days). However, after the 20th day of the shelf-life test, this ranking changes as UAE>SXHE>MAE. The UAE method had better results than MAE and SXHE methods due to same oil yield and higher functional oil content, especially at low extraction temperatures, and should be recommended for oil extraction from different kernels in the food industry.
- 3 June 2023
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 17 (5) , 4530-4540
Sugar-free functional sweet basil drink: ultrasound-assisted extraction, process optimization, antioxidant and antidiabetic activity
- 3 June 2023
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 17 (5) , 4530-4540
Sugar-free functional sweet basil drink: ultrasound-assisted extraction, process optimization, antioxidant and antidiabetic activity
- Open Access
A New Approach for the Development and Optimization of Gluten-Free Noodles Using Flours from Byproducts of Cold-Pressed Okra and Pumpkin Seeds
The significant protein and dietary fiber content of cold-pressed pumpkin (PSF) and okra (OSF) seed byproducts are well-known. However, their impact on noodles’ nutritional quality has never been studied. For the first time, noodle formulation was developed employing a genetic algorithm in the R programming language to achieve the most optimal sensory attributes as well as nutritional composition, color, cooking, and textural properties. The optimized noodle formulation was detected for OSF, PSF, gluten-free flour, salt, and egg with the following amounts: 11.5 g, 87.0 g, 0.9 g, 0.6 g, and 40 g, respectively, with 10.5 mL of water. The total protein (TP%), total fat (TF%), total carbohydrate (TC%), total dietary fiber content (TDF%), ash (%), total phenolic content (TPC mg GAE/100 g), and ABTS (%) of PSF were found to be 39%, 17%, 7%, 18%, 3%, 19%, and 48%, respectively, whereas for OSF, 33%, 8%, 21%, 32%, 5%, 16%, and 38%, respectively, were detected. In addition, TP (42.88%), TF (15.6%), ash (5.68%), TDF (40.48%), TPC (25.5 mg GAE/100 g), and ABTS (70%) values were obtained for the noodles. Consequently, the valorization of the cold oil press industry’s byproducts may be used as ingredients that add high value to gluten-free protein and fiber-rich noodle production, and they may gain interest from both processors and consumers.
Open AccessA New Approach for the Development and Optimization of Gluten-Free Noodles Using Flours from Byproducts of Cold-Pressed Okra and Pumpkin Seeds
The significant protein and dietary fiber content of cold-pressed pumpkin (PSF) and okra (OSF) seed byproducts are well-known. However, their impact on noodles’ nutritional quality has never been studied. For the first time, noodle formulation was developed employing a genetic algorithm in the R programming language to achieve the most optimal sensory attributes as well as nutritional composition, color, cooking, and textural properties. The optimized noodle formulation was detected for OSF, PSF, gluten-free flour, salt, and egg with the following amounts: 11.5 g, 87.0 g, 0.9 g, 0.6 g, and 40 g, respectively, with 10.5 mL of water. The total protein (TP%), total fat (TF%), total carbohydrate (TC%), total dietary fiber content (TDF%), ash (%), total phenolic content (TPC mg GAE/100 g), and ABTS (%) of PSF were found to be 39%, 17%, 7%, 18%, 3%, 19%, and 48%, respectively, whereas for OSF, 33%, 8%, 21%, 32%, 5%, 16%, and 38%, respectively, were detected. In addition, TP (42.88%), TF (15.6%), ash (5.68%), TDF (40.48%), TPC (25.5 mg GAE/100 g), and ABTS (70%) values were obtained for the noodles. Consequently, the valorization of the cold oil press industry’s byproducts may be used as ingredients that add high value to gluten-free protein and fiber-rich noodle production, and they may gain interest from both processors and consumers.
- Open Access
- 9 December 2022
- Published by MDPI AG in Agriculture
- Vol. 12 (12) , 2113
Evaluation of Carbonic Maceration Effect as a Pre-Treatment on the Drying Process of Strawberry
In the last decade, organic-based food materials have taken an increasing marketing share due to consumers’ interests. Strawberry is one of the world’s most important berry crops, with growing production. This study aimed to evaluate the drying process of organic strawberries and to determine the influences of process conditions on drying characteristics. To improve drying performance, carbonic maceration (CM) was investigated as a pre-treatment. The experimental design and the optimization of the drying with pre-treatment conditions were performed using statistical modeling (response surface method (RSM), central composite design (CCD)). Using the RSM, dependent variables such as drying time, total phenolic compound, antioxidant capacity, ascorbic acid concentration, and hue value were optimized as a function of operating conditions of CM pre-treatment and following the drying process. The results indicated that drying performance varied depending on drying temperature as well as process conditions of CM. Drying time was reduced by more than 30% with CM treatment compared to control. Furthermore, ascorbic acid content, antioxidant activity, and surface color of dried samples were protected better in the case of CM-pre-treated strawberries. Results showed that the optimum drying temperature, maceration pressure, maceration temperature, and maceration time parameters were 64.8 °C, 3.54 bar, 4.2 °C, and 4 h, respectively. The high potential of CM should be considered in terms of process improvement and product quality for drying processes. Thus, this study provides key outcomes in this respect. According to the obtained results, the CM was assessed as a promising technique applied before the drying of organic strawberries.
- 9 December 2022
- Published by MDPI AG in Agriculture
- Vol. 12 (12) , 2113
Open AccessEvaluation of Carbonic Maceration Effect as a Pre-Treatment on the Drying Process of Strawberry
In the last decade, organic-based food materials have taken an increasing marketing share due to consumers’ interests. Strawberry is one of the world’s most important berry crops, with growing production. This study aimed to evaluate the drying process of organic strawberries and to determine the influences of process conditions on drying characteristics. To improve drying performance, carbonic maceration (CM) was investigated as a pre-treatment. The experimental design and the optimization of the drying with pre-treatment conditions were performed using statistical modeling (response surface method (RSM), central composite design (CCD)). Using the RSM, dependent variables such as drying time, total phenolic compound, antioxidant capacity, ascorbic acid concentration, and hue value were optimized as a function of operating conditions of CM pre-treatment and following the drying process. The results indicated that drying performance varied depending on drying temperature as well as process conditions of CM. Drying time was reduced by more than 30% with CM treatment compared to control. Furthermore, ascorbic acid content, antioxidant activity, and surface color of dried samples were protected better in the case of CM-pre-treated strawberries. Results showed that the optimum drying temperature, maceration pressure, maceration temperature, and maceration time parameters were 64.8 °C, 3.54 bar, 4.2 °C, and 4 h, respectively. The high potential of CM should be considered in terms of process improvement and product quality for drying processes. Thus, this study provides key outcomes in this respect. According to the obtained results, the CM was assessed as a promising technique applied before the drying of organic strawberries.