SMSerdar Mercan

Serdar Mercan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Serdar Mercan has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Yüksek Basınçlı Sıcak Proses Geçiş Hatlarında Bağlantı Mikroyapı ve Mekanik Özelliklerinin Araştırılması

    by Serdar Mercan, Arslan Kaptan

    Günümüzde önemi artan rafinerilerin ana bölümlerinin başında sıcak proses geçiş hatları (SPG) yer almaktadır. SPG’ler rafinerilerde ham petrol vakum distilasyon ünitesi ve diğer ünitelerde bulunan vakum hatları olarak da isimlendirilen hatlardır. SPG hatlarında meydana gelebilecek hatalar insan ve çevre üzerinde olumsuz etkilerin oluşacağı büyük endüstriyel kazalara neden olmaktadır. Bu hatlarda sızdırmazlığın sağlanması, ısıl genleşme problemlerinin önüne geçilebilmesi ve ekonomik bir bağlantı yöntemi olduğu için birleştirme işlemlerinde kaynak yöntemleri tercih edilmektedir. SPG hatlarında ortalama 14 MPa basınç altında ve yaklaşık 640 °C sıcaklıktan 30 °C sıcaklığa kadar akışkan transferinin sağlandığı fırın giriş çıkış hatları yer almaktadır. Fırın içinde SS 316L paslanmaz çelik, fırın dışında ASTM A106 Grade B düşük karbonlu çelik kullanılmaktadır. Bu çalışma kapsamında fırın giriş-çıkış hatlarında TİG kaynak yöntemi ile birleştirilen bağlantılar incelenmiştir. Endüstriyel uygulamalarda sıklıkla tercih edilen parametrelerin hangilerinin en güvenli kaynak bağlantılarını meydana getirdiği imalatçılar tarafından belirsizliğini korumaktadır. Bu çalışmada deneyler yapılarak en güvenli kaynak parametreleri tespit edilmiştir. En iyi sonuçlar; eğme deneyinde kaynak bölgesinde çatlak oluşmaması ve 678 MPa çekme mukavemeti ile S6 nolu numuneden elde edilmiştir. S6 nolu numune kök, sıcak, dolgu ve kapak pasolarının sırasıyla 90, 150, 165 ve 170 A akımda gerçekleştirilen numunedir.

  • Open Access

    Cooling System Analysis of Gas Turbine Blades Manufactured Using Different Material Types

    by İbRahim Can, Serdar Mercan, Dogan Engin Alnak, Muhammed Sipahi

    One of the major challenges in gas turbine engines is that the blades operate at temperatures higher than the melting points of the materials they are made of. Researchers have focused on developing materials that can withstand high temperatures and designing effective cooling systems for the blades. Although there are limitations to the improvements that can be achieved through material technology, the importance of cooling is clear, and it is considered a critical factor for achieving high efficiency in turbines. To this end, two cooling models were developed using different materials, and the heat transfer in the blades was analyzed numerically using the SolidWorks package program and Ansys. The study considered titanium carbide (TiC) and third-generation single crystal super-alloy CMSX-10 materials. The blade designs were proposed based on the analysis results. The analysis showed that the enhanced model performed better when used with CMSX-10 material in terms of thermal properties.

  • Open Access

    Influence of Process Parameters on Kerf Width in Abrasive Waterjet Machining of GFRP Composites

    by Arslan Kaptan, Serdar Mercan, Fuat Kartal

    This study investigates the influence of process parameters on kerf width in abrasive waterjet (AWJ) machining of glass fiber reinforced polymer (GFRP) composites. The experimental analysis was conducted using a Taguchi L27 orthogonal array to optimize the machining parameters: pressure, feed rate, abrasive flow rate, and standoff distance. The top kerf width (TKW) and bottom kerf width (BKW) were measured to evaluate the impact of these parameters. Results indicate that higher pressures and abrasive flow rates generally increase both TKW and BKW due to enhanced material removal rates. Conversely, increased feed rates tend to reduce kerf widths, highlighting the importance of optimizing cutting speeds. Standoff distance exhibited a less pronounced effect but still influenced the kerf widths. The optimal parameters for minimizing TKW and BKW were identified, providing valuable insights for improving precision and efficiency in AWJ machining of GFRP composites. These findings contribute to the development of more effective manufacturing practices for high-performance composite materials.


  • Open Access

    The Effect of Channel Depth on Joint Quality in Cu/AISI 1040 Materials Joined by Mechanical Locking Method

    by Serdar Mercan, Arslan Kaptan

    The aim of this study is to investigate a novel and environmentally friendly method that is an alternative to conventional methods in the production of bi-metallic products. Bi-metallic products are obtained by joining materials with different physic...

  • Open Access

    Mekanik Kilitleme Yöntemi ile Birleştirilen AA7075/AZ91 Malzemelerin Konik Kanal Tasarımı

    by Serdar Mercan

    Material types with different chemical and physical properties are employed by being joined in industrial applications. The major objective is to generate high-performance prochannels by bringing outstanding properties of materials together. Many conventional methods, primarily welding method such as casting, adhesion, rivet weld, and bolts are employed in joining procedures. Among the joining methods, mechanical locking, a novel and ecologically friendly method, stands out as a successful method, particularly when joining dissimilar metal types. Within the scope of this study, the optimization of the channel geometry was performed on the AZ91 mold part, out of AA7075/AZ91 material pairs joined by using the mechanical locking method. The channel design was paid attention to ensure that it do not adversely affect the stress values and facilitates material flow. Fixed joint angle and fixed channel depth were used in accordance with the data received from previous research results and employed in the analysis. The analyses were completed using the finite element method and the Static Structural Module of the Workbench 18.2 version of the ANSYS software. The whole study was carried out on 3D geometric models. As a result, it was determined that the mechanical properties of the samples joined by MLM significantly changed depending on the channel design. The mechanical properties of the joint improved by roughly 3% with the optimal joint design, while the joint design that will facilitate material flow was achieved.

  • Reducing the Roughness and Sound Intensity by Optimization of Cutting Parameters in Processing of AISI 2714 Steel Material on CNC Milling Machine

    by Sirer Albayrak, Serdar Mercan, Hikmet Karaçam

    Within the scope of this study, optimization of cutting parameters (feed rate, cutting speed and depth of cut) was aimed in order to reduce the noise level that occurs during the processing of AISI 2714 steel on CNC milling machine without compromisi...

  • Open Access

    REDUCING SOUND INTENSITY BY OPTIMIZING CUTTING PARAMETERS ON CNC MILLING MACHINES

    by Sirer Albayrak, Serdar Mercan, Hikmet Karaçam

    In the cutting process with machine tools in the Machinery Manufacturing Industry; while the desired surface integrity is ensured by the optimization of the cutting parameters, the noise level must be kept at a minimum to protect the health of the workers. The noise level can be reduced by using this optimization without compromising the surface roughness through processing of EN AW 6013 material on a CNC milling machine. Experimental design was examined in three variables, three levels and two target functions. The effects of these parameters on the target function were studied by performing experimental plans determined by "Central Composite Design (CCT)" of Response Surface Method (RSM)". To assess the sound intensity and surface roughness, mathematical models were developed by performing regression analysis on the experimental results. These developed models have been tested with control experiments and it has been seen that the models have acceptable error rates. The obtained regression equation is highly modeled with a validity of 93.29% for sound intensity and 97.33% for surface roughness. Therefore, cutting parameters were found to be related to sound intensity and surface roughness values.

  • AISI 1040 ve AA6013 malzeme çiftinin mekanik kilitleme yönteminde (MLM) farklı bağlantı açıları kullanılarak birleştirilmesi

    by Serdar Mercan, Hatice Varol Özkavak

    Farklı malzeme türlerinin birleştirilerek kullanılmasının zorunlu olduğu birçok endüstriyel uygulama bulunmaktadır. Ancak kaynak, döküm, yapıştırma gibi diğer birleştirme yöntemleri ile bu her zaman mümkün olmamakta ya da çeşitli problemler ortaya çıkarmaktadır. Bu problemlerin ortadan kaldırılması amacıyla klasik birleştirme yöntemlerine alternatif olarak yeni ve çevreci bir yöntem olan mekanik kilitleme yöntemi (MLM) kullanılmaktadır. MLM yöntemi özellikle farklı kimyasal ve fiziksel özelliklere sahip malzeme çiftlerinin birleştirilmesinde kullanılabilir. Bununla birlikte yüksek ısı girdisinin neden olduğu mikro yapı hatalarının azaltılması istenen durumlarda tercih edilebilir. Bu çalışmada; MLM için bağlantı kalitesini doğrudan etkileyen bağlantı açısının mikro yapı ve mekanik özelliklerle olan etkisi araştırılmıştır. Bu amaçla; AISI 1040 çelik ve AA6013 alüminyum alaşımı MLM yöntemi ile farklı bağlantı açıları (7°,10° ve 13°) kullanılarak birleştirilmiştir. Birleştirme işlemi sonrasında mikro yapı incelemesi, mikro sertlik ölçümleri ile çekme testleri yapılarak bağlantı performansı belirlenmiştir. Çalışma sonunda 13° bağlantı açısı ile hazırlanan numunelerde 241,38 MPa değer ile en yüksek mekanik özellikler elde edilmiştir. Bağlantı açısının daha düşük olduğu diğer numunelerde ise bağlantıyı gerçekleştiren flanş oluşumunun düzensiz dağılım gösterdiği, malzeme akışının yetersiz olduğu bunun sonucunda mekanik özelliklerin düştüğü tespit edilmiştir. There are many industrial applications where different types of materials must be combined and used. However, this is not always possible with welding, bonding and other disassembling methods or it contains various problems. In order to eliminate these problems, mechanical locking method (MLM), which is a new and environmentally friendly method, is used as an alternative to classical joining methods. MLM method can be used especially in joining material pairs with different chemical and physical properties.However, it can be preferred in situations where it is desired to reduce microstructure defects caused by high heat input. In this study; For MLM method, the effect of the connection angle, which can directly affect the joining quality, on the microstructure and mechanical properties was investigated. For this purpose, AISI 1040 steel and AA6013 aluminum alloy were joined at different connection angles (7°, 10° and 13°) using the MLM method. After the joining process, microstructure analysis, microhardness measurements and tensile tests were performed and the connection performance was determined. At the end of the study, the highest mechanical properties were obtained with a value of 241.38 MPa in the samples prepared with 13° connection angle. An other samples where the connection angle was lower, it was determined that the flange formation performing the connection showed an irregular distribution, the material flow was insufficient and the mechanical properties decreased as a result.