Bin Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Bin Xu has a total of 152 co-authors. Here are the top co-authors by number of shared publications:
Huiying Xu
Department of Electronic Engineering, Xiamen University, Xiamen 361005, China
26 shared publicationsJun Xu
26 shared publicationsZhiping Cai
Department of Electronic Engineering Xiamen University Xiamen 361005 China
25 shared publicationsJinglong Lan
16 shared publications- Xiaodong Xu
Jiangsu Key Laboratory of Advanced Laser Materials and Devices, School of Physics and Electronic Engineering, Jiangsu Normal University, Xuzhou 221116, China
13 shared publications Dongzhen Li
12 shared publications
Latest Publications
- 23 September 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 204
A widely tunable femtosecond light source based on green-pumped BBO optical parametric oscillator
- 23 September 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 204
A widely tunable femtosecond light source based on green-pumped BBO optical parametric oscillator
- 6 December 2025
- Published by Elsevier in Infrared Physics & Technology
- Vol. 153
OPSL-pumped 47-fs Kerr-lens mode-locked Yb:GdScO3 laser
- 6 December 2025
- Published by Elsevier in Infrared Physics & Technology
- Vol. 153
OPSL-pumped 47-fs Kerr-lens mode-locked Yb:GdScO3 laser
- 3 December 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (24) , 7472-7475
64-fs ultrashort pulse generation from a Kerr-lens mode-locked (Yb 0.058 Sc 0.508 Y 0.434 ) 2 O 3 ceramic laser
We have successfully used a mixed sesquioxide ceramic (Yb 0.058 Sc 0.508 Y 0.434 ) 2 O 3 (Yb:YScO 3 ) as a gain medium for femtosecond laser generation via Kerr-lens mode-locked laser technology. A high-brightness diode laser has been used for pumping the ceramic sample, and a stable pulsed laser with a time duration of 64 fs and an average output power exceeding 100 mW at a peak wavelength of 1046 nm has been achieved. This is the first, to the best of our knowledge, report of femtosecond laser operation using mixed sesquioxide ceramic as a gain medium, and the time-domain width of the obtained pulsed laser is also one of the shortest in Yb-doped ceramic material mode-locked lasers.
- 3 December 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (24) , 7472-7475
64-fs ultrashort pulse generation from a Kerr-lens mode-locked (Yb 0.058 Sc 0.508 Y 0.434 ) 2 O 3 ceramic laser
We have successfully used a mixed sesquioxide ceramic (Yb 0.058 Sc 0.508 Y 0.434 ) 2 O 3 (Yb:YScO 3 ) as a gain medium for femtosecond laser generation via Kerr-lens mode-locked laser technology. A high-brightness diode laser has been used for pumping the ceramic sample, and a stable pulsed laser with a time duration of 64 fs and an average output power exceeding 100 mW at a peak wavelength of 1046 nm has been achieved. This is the first, to the best of our knowledge, report of femtosecond laser operation using mixed sesquioxide ceramic as a gain medium, and the time-domain width of the obtained pulsed laser is also one of the shortest in Yb-doped ceramic material mode-locked lasers.
- 13 October 2025
- Published by Elsevier in Optics Communications
- Vol. 596
1.4-W all-solid-state single-frequency Pr:LiYF4-LBO ring cavity laser at 320 nm
- 13 October 2025
- Published by Elsevier in Optics Communications
- Vol. 596
1.4-W all-solid-state single-frequency Pr:LiYF4-LBO ring cavity laser at 320 nm
- 11 September 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (18) , 5865-5868
32-fs Kerr-lens mode-locked alexandrite laser pumped by a Pr:LiYF4 laser at 639 nm
We report on an alexandrite laser pumped by an all-solid-state Pr:LiYF4 (YLF) continuous-wave laser for the first time, to the best of our knowledge. The self-developed Pr:YLF laser at 639 nm has a power of 3.8 W. For continuous-wave alexandrite laser operation, we have achieved continuous tuning of the wavelength range from 718 nm to 785 nm. For Kerr-lens mode-locked alexandrite laser operation, we have realized a pulse width of 32 fs, which, to our knowledge, is currently the shortest pulse width for alexandrite laser. In the current research on alexandrite femtosecond lasers, 532 nm and 589 nm pump sources based on solid-state laser nonlinear frequency conversion technology are commonly used. The 639-nm laser we use in this work is the fundamental wave, which exhibits advantages in efficiency and system compactness.
- 11 September 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (18) , 5865-5868
32-fs Kerr-lens mode-locked alexandrite laser pumped by a Pr:LiYF4 laser at 639 nm
We report on an alexandrite laser pumped by an all-solid-state Pr:LiYF4 (YLF) continuous-wave laser for the first time, to the best of our knowledge. The self-developed Pr:YLF laser at 639 nm has a power of 3.8 W. For continuous-wave alexandrite laser operation, we have achieved continuous tuning of the wavelength range from 718 nm to 785 nm. For Kerr-lens mode-locked alexandrite laser operation, we have realized a pulse width of 32 fs, which, to our knowledge, is currently the shortest pulse width for alexandrite laser. In the current research on alexandrite femtosecond lasers, 532 nm and 589 nm pump sources based on solid-state laser nonlinear frequency conversion technology are commonly used. The 639-nm laser we use in this work is the fundamental wave, which exhibits advantages in efficiency and system compactness.
- Open Access
- 1 January 2025
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 23 (3) , 031405
Watt-level all-solid-state single-frequency Pr:LiYF4 ring laser in the orange spectral region with wavelength tunability
In this work, we report on the recent research progress on watt-level all-solid-state single-frequency Pr:LiYF4 (YLF) lasers in the orange spectral region. Combining dual-end pumping and ring-cavity technologies, we have achieved a maximum single-frequency output of 1.19 W at 607 nm with a linewidth of about 20.3 MHz. Based on this study, by inserting a 0.15 mm etalon inside the ring cavity, we find that the 607 nm lasing can be completely suppressed and a single-frequency laser at 604 nm with a 0.69 W output power and a linewidth of about 16.7 MHz can also be obtained. Moreover, the wavelengths of the two single-frequency lasers can be tuned from 607.16 to 607.61 nm and from 603.99 to 605.02 nm, respectively. Furthermore, the single-frequency Pr:YLF laser can also operate in a state of the two orange wavelengths, simultaneously, with a maximum output power of 0.97 W. We believe that this is the highest output power of a direct generation of single-frequency orange lasers and the first demonstration of the wavelength-tuned operation of the achieved single-frequency orange lasers, which could bring opportunities for the application of single-frequency orange lasers.
- 1 January 2025
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 23 (3) , 031405
Open AccessWatt-level all-solid-state single-frequency Pr:LiYF4 ring laser in the orange spectral region with wavelength tunability
In this work, we report on the recent research progress on watt-level all-solid-state single-frequency Pr:LiYF4 (YLF) lasers in the orange spectral region. Combining dual-end pumping and ring-cavity technologies, we have achieved a maximum single-frequency output of 1.19 W at 607 nm with a linewidth of about 20.3 MHz. Based on this study, by inserting a 0.15 mm etalon inside the ring cavity, we find that the 607 nm lasing can be completely suppressed and a single-frequency laser at 604 nm with a 0.69 W output power and a linewidth of about 16.7 MHz can also be obtained. Moreover, the wavelengths of the two single-frequency lasers can be tuned from 607.16 to 607.61 nm and from 603.99 to 605.02 nm, respectively. Furthermore, the single-frequency Pr:YLF laser can also operate in a state of the two orange wavelengths, simultaneously, with a maximum output power of 0.97 W. We believe that this is the highest output power of a direct generation of single-frequency orange lasers and the first demonstration of the wavelength-tuned operation of the achieved single-frequency orange lasers, which could bring opportunities for the application of single-frequency orange lasers.
- 3 July 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (14) , 3854-3857
Compact high-power 320-nm continuous-wave single-frequency laser based on power scaling of a diode-pumped Pr:LiYF4 ring laser at red
Single-frequency (SF) lasers in the visible spectral region are usually obtained through an indirect method, i.e., frequency doubling of near-infrared SF lasers. In this work, we report on the direct generation of a high-power continuous-wave (CW) SF laser in red based on a diode-pumped Pr:LiYF4 (YLF) ring cavity technology. A maximum output power is scaled to 3.98 W at 640 nm with a linewidth of about 17.2 MHz and a power stability of 0.6%. Moreover, by inserting a LBO crystal into the ring cavity for intracavity frequency doubling of the 640 nm SF laser, we have also successfully demonstrated an ultraviolet (UV) SF laser at 320 nm, for the first time to the best of our knowledge, with a maximum power of 670 mW. This work provides a promising route for the development of simple, compact, and high-power SF lasers operating in visible and UV spectral regions.
- 3 July 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (14) , 3854-3857
Compact high-power 320-nm continuous-wave single-frequency laser based on power scaling of a diode-pumped Pr:LiYF4 ring laser at red
Single-frequency (SF) lasers in the visible spectral region are usually obtained through an indirect method, i.e., frequency doubling of near-infrared SF lasers. In this work, we report on the direct generation of a high-power continuous-wave (CW) SF laser in red based on a diode-pumped Pr:LiYF4 (YLF) ring cavity technology. A maximum output power is scaled to 3.98 W at 640 nm with a linewidth of about 17.2 MHz and a power stability of 0.6%. Moreover, by inserting a LBO crystal into the ring cavity for intracavity frequency doubling of the 640 nm SF laser, we have also successfully demonstrated an ultraviolet (UV) SF laser at 320 nm, for the first time to the best of our knowledge, with a maximum power of 670 mW. This work provides a promising route for the development of simple, compact, and high-power SF lasers operating in visible and UV spectral regions.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (3) , 183-186
Watt-Level Single-Frequency Pr:LiY0.3Lu0.7F4 Mixed Crystal Laser in Red Spectral Region
We report on the first watt-level single frequency all-solid-state Pr3+-doped laser operating in continuous-wave mode based on ring cavity method. The achieved red (639.52 nm) single frequency laser has a maximum output power of 1.19 W at an absorbed power of 5.91 W with a slope efficiency of about 24.9%. Linewidth of the single frequency was measured to be about 20 MHz. By inserting an F-P etalon into the ring cavity, we also obtained a dual-wavelength laser (639.22+639.63 nm) still operating in single longitudinal mode. This dual-wavelength single-longitudinal-mode laser has the potential to generate a microwave source. In comparison to a conventional method for obtaining single frequency laser in visible through frequency doubling, using Pr3+-doped materials combined with single frequency laser technology to directly obtain visible single-longitudinal-mode laser has certain advantages in simplicity, miniaturization, high efficiency and cost efficiency of the total system.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (3) , 183-186
Watt-Level Single-Frequency Pr:LiY0.3Lu0.7F4 Mixed Crystal Laser in Red Spectral Region
We report on the first watt-level single frequency all-solid-state Pr3+-doped laser operating in continuous-wave mode based on ring cavity method. The achieved red (639.52 nm) single frequency laser has a maximum output power of 1.19 W at an absorbed power of 5.91 W with a slope efficiency of about 24.9%. Linewidth of the single frequency was measured to be about 20 MHz. By inserting an F-P etalon into the ring cavity, we also obtained a dual-wavelength laser (639.22+639.63 nm) still operating in single longitudinal mode. This dual-wavelength single-longitudinal-mode laser has the potential to generate a microwave source. In comparison to a conventional method for obtaining single frequency laser in visible through frequency doubling, using Pr3+-doped materials combined with single frequency laser technology to directly obtain visible single-longitudinal-mode laser has certain advantages in simplicity, miniaturization, high efficiency and cost efficiency of the total system.
- 5 September 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (18) , 4725-4728
Watt-level and near diffraction-limited Pr3+-doped single-crystal fiber lasers
Using a CZ-grown a-cut Pr:YLF crystal as laser gain medium after processing it into crystal fiber, we have demonstrated real Pr3+-doped single-crystal fiber lasers for the first time to the best of our knowledge. This Pr3+ crystal fiber has absorbed up to 20.4 W of pump power, which is the highest absorbed power among Pr3+ lasers. For two representative laser emissions at about 639 nm and 607 nm, we have achieved maximum output powers of 5.45 W and 3.04 W, respectively. Output powers of the two lasers show very good linearities, which indicate that the present output powers are only limited by the available pump power. Both laser emissions have exhibited near diffraction-limited beam qualities. This proposal has provided a good and feasible route for the development of compact, high-power, and high-brightness all-solid-state Pr3+ visible lasers via crystal fiber.
- 5 September 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (18) , 4725-4728
Watt-level and near diffraction-limited Pr3+-doped single-crystal fiber lasers
Using a CZ-grown a-cut Pr:YLF crystal as laser gain medium after processing it into crystal fiber, we have demonstrated real Pr3+-doped single-crystal fiber lasers for the first time to the best of our knowledge. This Pr3+ crystal fiber has absorbed up to 20.4 W of pump power, which is the highest absorbed power among Pr3+ lasers. For two representative laser emissions at about 639 nm and 607 nm, we have achieved maximum output powers of 5.45 W and 3.04 W, respectively. Output powers of the two lasers show very good linearities, which indicate that the present output powers are only limited by the available pump power. Both laser emissions have exhibited near diffraction-limited beam qualities. This proposal has provided a good and feasible route for the development of compact, high-power, and high-brightness all-solid-state Pr3+ visible lasers via crystal fiber.
- 28 August 2023
- Published by Elsevier in Optics & Laser Technology
- Vol. 168
First single-frequency Pr:LiYF4 ring laser at green
- 28 August 2023
- Published by Elsevier in Optics & Laser Technology
- Vol. 168
First single-frequency Pr:LiYF4 ring laser at green