Arindam Majumder
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Arindam Majumder has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Dipak Laha
Jadavpur University
4 shared publications John Deb Barma
National Institute of Technology Agartala
4 shared publications- Alok Ranjan
National Institute of Technology Agartala
3 shared publications - Sagnik Pal
National Institute of Technology Agartala
3 shared publications Anit Kumar
2 shared publications- Arindam Sinha
Department of Mechanical Engineering, National Institute of Technology Agartala, Tripura 799046, India
2 shared publications
Latest Publications
- 21 July 2026
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
Surface Modification of SS316L using EDM process with Ti-6Al-4V alloy tool
SS316L is one of the cheaper solutions for biomedical applications, especially for making implants. However, its use in long-term applications is limited due to the emission of Ni + , Cr 3+ , and Fe 3+ , resulting in itching, eczema, cancer, and genotoxic-mutagenic effects. To solve this problem, the work modifies the surface of the SS316L workpiece by depositing tool material, made of Ti-6Al-4V alloy, on it using the EDM process. The process parameters, peak discharge current (I) and pulse-on time (T(ON)), were varied during the experiments, and corresponding effects on material deposition and on surface morphology were analysed. The results show that increasing the I enhances material deposition on the modified surface, makes it uniform and continuous, and improves the Ti content by removing Cr, Ni, and Fe. Similarly, increasing T(ON) to a certain value resulted in the deposition of more tool material, an increase in Ti content, and the creation of a more uniform and continuous layer on the modified surface. However, further increasing the T(ON) reduces the deposition of tool material, resulting in a surface with low Ti content. With an I of 10 A and a T(ON) of 100 μs, the highest Ti deposition in weight percentage was attained at 39.1. Additionally, by increasing I, surface roughness initially rises due to the formation of larger and deeper craters on the surface. However, it eventually decreases as the deposited material layer becomes more uniform. The increase in T(ON) contributes to greater surface roughness due to the creation of deeper and wider voids.
- 21 July 2026
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
Surface Modification of SS316L using EDM process with Ti-6Al-4V alloy tool
SS316L is one of the cheaper solutions for biomedical applications, especially for making implants. However, its use in long-term applications is limited due to the emission of Ni + , Cr 3+ , and Fe 3+ , resulting in itching, eczema, cancer, and genotoxic-mutagenic effects. To solve this problem, the work modifies the surface of the SS316L workpiece by depositing tool material, made of Ti-6Al-4V alloy, on it using the EDM process. The process parameters, peak discharge current (I) and pulse-on time (T(ON)), were varied during the experiments, and corresponding effects on material deposition and on surface morphology were analysed. The results show that increasing the I enhances material deposition on the modified surface, makes it uniform and continuous, and improves the Ti content by removing Cr, Ni, and Fe. Similarly, increasing T(ON) to a certain value resulted in the deposition of more tool material, an increase in Ti content, and the creation of a more uniform and continuous layer on the modified surface. However, further increasing the T(ON) reduces the deposition of tool material, resulting in a surface with low Ti content. With an I of 10 A and a T(ON) of 100 μs, the highest Ti deposition in weight percentage was attained at 39.1. Additionally, by increasing I, surface roughness initially rises due to the formation of larger and deeper craters on the surface. However, it eventually decreases as the deposited material layer becomes more uniform. The increase in T(ON) contributes to greater surface roughness due to the creation of deeper and wider voids.
- 13 June 2026
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (21) , 23311-23352
MOSGA: A Multi Objective Version of Snow Geese Algorithm for Unconstrained and Constrained Optimization Problems
- 13 June 2026
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (21) , 23311-23352
MOSGA: A Multi Objective Version of Snow Geese Algorithm for Unconstrained and Constrained Optimization Problems
- 19 March 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Analysis of material removal rate and surface quality during rotating magnetic field-assisted EDM of AISI D2 tool steel
A major concern of machining stability in electrical discharge machining (EDM) is the accumulation of debris in the gap. Therefore, removing debris from the gap quickly and effortlessly enhances the performance of EDM. In this investigation, Rotating Magnetic Field (RMF) has been integrated with the EDM to form RMF-assisted EDM (RMF-EDM). Later, this study compares the performance of RMF-EDM with the conventional EDM process while performing machining on AISI D2 tool steel. The study also focuses on the effect of RMF speed, magnetic field strength, and current on surface roughness (Ra), material removal rate (MRR), tool wear rate (TWR), and surface morphology. The results reveal that the RMF-EDM provides better performance compared to EDM with a stationary magnetic field assisted EDM (MF-EDM) and conventional EDM in terms of both MRR and surface quality. It has also been observed that the increase in rotating speed enhances MRR and TWR to reach a peak at 1000 rpm before declining at higher speeds under the magnetic field strengths of 0.3 T and 0.6 T. A concurrent trend is observed in surface quality; Ra initially improves as the speed approaches 1000 rpm but deteriorates significantly on further increases in the rotating speed. There is a trade-off in terms of magnetic field strength; the highest MRR and best surface finish are observed at 0.3 T, but the lowest TWR is achieved at 0.6 T. The RMF-EDM at 1000 rpm outperforms the conventional EDM, achieving improvements of 31% and 23.16% on average in MRR and Ra, respectively. In comparison to MF-EDM, RMF-EDM with 1000 rpm improves MRR and Ra by an average of 27.33% and 19.61%, respectively. Moreover, the field emission scanning electron microscopy (FESEM) images confirm the least presence of defects such as unflushed debris, resolidified material, pits, and cracks is found at an RMF speed of 1000 rpm. Lastly, analysis of variance reveals that RMF speed has a significant effect on MRR, TWR, and Ra, with a percentage of contribution of 22.14, 17.17, and 86.15, respectively.
- 19 March 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Analysis of material removal rate and surface quality during rotating magnetic field-assisted EDM of AISI D2 tool steel
A major concern of machining stability in electrical discharge machining (EDM) is the accumulation of debris in the gap. Therefore, removing debris from the gap quickly and effortlessly enhances the performance of EDM. In this investigation, Rotating Magnetic Field (RMF) has been integrated with the EDM to form RMF-assisted EDM (RMF-EDM). Later, this study compares the performance of RMF-EDM with the conventional EDM process while performing machining on AISI D2 tool steel. The study also focuses on the effect of RMF speed, magnetic field strength, and current on surface roughness (Ra), material removal rate (MRR), tool wear rate (TWR), and surface morphology. The results reveal that the RMF-EDM provides better performance compared to EDM with a stationary magnetic field assisted EDM (MF-EDM) and conventional EDM in terms of both MRR and surface quality. It has also been observed that the increase in rotating speed enhances MRR and TWR to reach a peak at 1000 rpm before declining at higher speeds under the magnetic field strengths of 0.3 T and 0.6 T. A concurrent trend is observed in surface quality; Ra initially improves as the speed approaches 1000 rpm but deteriorates significantly on further increases in the rotating speed. There is a trade-off in terms of magnetic field strength; the highest MRR and best surface finish are observed at 0.3 T, but the lowest TWR is achieved at 0.6 T. The RMF-EDM at 1000 rpm outperforms the conventional EDM, achieving improvements of 31% and 23.16% on average in MRR and Ra, respectively. In comparison to MF-EDM, RMF-EDM with 1000 rpm improves MRR and Ra by an average of 27.33% and 19.61%, respectively. Moreover, the field emission scanning electron microscopy (FESEM) images confirm the least presence of defects such as unflushed debris, resolidified material, pits, and cracks is found at an RMF speed of 1000 rpm. Lastly, analysis of variance reveals that RMF speed has a significant effect on MRR, TWR, and Ra, with a percentage of contribution of 22.14, 17.17, and 86.15, respectively.
- Open Access
- 3 November 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 114 (1) , 3
Performance Enhancement of EDM Utilizing a Cryogenically Treated Electrode: An Experimental Investigation on Monel 400 Alloy
In recent years, unconventional machine techniques have made the machining process simpler than it was under conventional machining methods. EDM is recognized as one of the leading methods in unconventional machining processes. The need for materials with improved mechanical properties continues to rise due to constant advancements in the mechanical industry. Cryogenic treatment is used for property enhancement and can be useful in an extensive range of metals. This research investigates the performance of a cryogenically treated copper electrode during EDM of Monel 400. The EDM parameters varied during the research are pulse on time, pulse off time, gap voltage, and discharge current. The experiments were designed using Taguchi’s design of experiment. The constraints of the process are fine-tuned for both MRR and surface smoothness, with their proportion impacts assessed through the ANOVA technique. Regression analysis is accomplished, creating an experimental correlation between both MRR and surface smoothness, examined using RSM technique. This comprehensive study demonstrates that cryogenic treatment of electrode provides better MRR and SR.
- 3 November 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 114 (1) , 3
Open AccessPerformance Enhancement of EDM Utilizing a Cryogenically Treated Electrode: An Experimental Investigation on Monel 400 Alloy
In recent years, unconventional machine techniques have made the machining process simpler than it was under conventional machining methods. EDM is recognized as one of the leading methods in unconventional machining processes. The need for materials with improved mechanical properties continues to rise due to constant advancements in the mechanical industry. Cryogenic treatment is used for property enhancement and can be useful in an extensive range of metals. This research investigates the performance of a cryogenically treated copper electrode during EDM of Monel 400. The EDM parameters varied during the research are pulse on time, pulse off time, gap voltage, and discharge current. The experiments were designed using Taguchi’s design of experiment. The constraints of the process are fine-tuned for both MRR and surface smoothness, with their proportion impacts assessed through the ANOVA technique. Regression analysis is accomplished, creating an experimental correlation between both MRR and surface smoothness, examined using RSM technique. This comprehensive study demonstrates that cryogenic treatment of electrode provides better MRR and SR.
- 2 August 2025
- Published by Taylor & Francis
- p. 228-245
Role of Artificial Intelligence in Robotics Applications
Robots have developed the ability to train, adjust, and enhance their performance through the incorporation of artificial intelligence (AI) technologies. AI introduced intelligence in robotics systems, enhancing the credibility of automation in all developing areas. AI applications, ML, and DL algorithms are used in autonomous vehicles, navigation of drones, industrial robotics, healthcare assistance, process optimization, automation of industry, and many more. Industry 4.0 revolution picking pace and automation have become more intelligent, human friendly, and capable of decision-making. However, there are some concerns and obstacles present. A large amount of historical data is needed to train AI models, and a large amount of power source is needed to implement the AI techniques in real-time robotic systems and automation. Safety concerns during human–robot interaction and ethical concerns arise due to the decrease in the number of jobs. Overall, for a better future, automation requires AI and robotics is a powerful tool that uses AI for the advancement of technological, social, and economic grounds.
- 2 August 2025
- Published by Taylor & Francis
- p. 228-245
Role of Artificial Intelligence in Robotics Applications
Robots have developed the ability to train, adjust, and enhance their performance through the incorporation of artificial intelligence (AI) technologies. AI introduced intelligence in robotics systems, enhancing the credibility of automation in all developing areas. AI applications, ML, and DL algorithms are used in autonomous vehicles, navigation of drones, industrial robotics, healthcare assistance, process optimization, automation of industry, and many more. Industry 4.0 revolution picking pace and automation have become more intelligent, human friendly, and capable of decision-making. However, there are some concerns and obstacles present. A large amount of historical data is needed to train AI models, and a large amount of power source is needed to implement the AI techniques in real-time robotic systems and automation. Safety concerns during human–robot interaction and ethical concerns arise due to the decrease in the number of jobs. Overall, for a better future, automation requires AI and robotics is a powerful tool that uses AI for the advancement of technological, social, and economic grounds.
- 1 August 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (7) , 9317-9337
Performance Analysis of Nano-SiC Mixed EDM Process with Rotary Workpiece and Interior Flushing Tool During the Machining of Inconel 825
- 1 August 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (7) , 9317-9337
Performance Analysis of Nano-SiC Mixed EDM Process with Rotary Workpiece and Interior Flushing Tool During the Machining of Inconel 825
- 5 June 2025
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
INVESTIGATION OF SURFACE DEFECTS OF EDMED MONEL 400 AND PROCESS OPTIMIZATION USING K-FOLD NN-INTEGRATED MOBO
The paper investigates the effect of different tool materials on the defects developed on the surface of an electro-discharge-machined Monel 400 and proposes an efficient approach by combining a multi-objective bonobo optimizer (MOBO) with the K-fold neural network (K-fold NN) for enhancing its machining performance. The novelty of this work is implementing a K-fold NN for finding prediction models of an electro-discharge machining (EDM) problem with a small experimental dataset and utilizing a MOBO to optimize the process parameters. During the study, process performance is evaluated by two machining outputs, viz. material removal rate (MRR) and surface roughness (SR). A study on machined surface defects is then accomplished by analyzing their scanning electron microscopy (SEM) pictures. The results indicate that using copper electrodes reduces the chances of fatigue failure of the Monel 400-made machined component by optimizing the surface crack size and density. The obtained dataset is then used in a K-fold NN to build prediction models between factors and responses. After that, the MOBO uses the prediction models as fitness functions to find non-dominated optimal solutions. An improvement in MRR and SR up to 21.237% and 27.166%, respectively, is achieved using the proposed methodology, compared to the experimental results. Confirmatory tests verify the effectiveness of the developed NN models by indicating an average error percentage of 3.353 and 2.662 in the prediction of MRR and SR, respectively. The performance comparison reveals the superiority of MOBO over two popular algorithms, namely multi-objective genetic algorithm (MOGA) and multi-objective particle swarm optimization algorithm (MOPSO), as well as multi-objective dragonfly algorithm (MODA), an algorithm recently used to solve the EDM problem.
- 5 June 2025
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
INVESTIGATION OF SURFACE DEFECTS OF EDMED MONEL 400 AND PROCESS OPTIMIZATION USING K-FOLD NN-INTEGRATED MOBO
The paper investigates the effect of different tool materials on the defects developed on the surface of an electro-discharge-machined Monel 400 and proposes an efficient approach by combining a multi-objective bonobo optimizer (MOBO) with the K-fold neural network (K-fold NN) for enhancing its machining performance. The novelty of this work is implementing a K-fold NN for finding prediction models of an electro-discharge machining (EDM) problem with a small experimental dataset and utilizing a MOBO to optimize the process parameters. During the study, process performance is evaluated by two machining outputs, viz. material removal rate (MRR) and surface roughness (SR). A study on machined surface defects is then accomplished by analyzing their scanning electron microscopy (SEM) pictures. The results indicate that using copper electrodes reduces the chances of fatigue failure of the Monel 400-made machined component by optimizing the surface crack size and density. The obtained dataset is then used in a K-fold NN to build prediction models between factors and responses. After that, the MOBO uses the prediction models as fitness functions to find non-dominated optimal solutions. An improvement in MRR and SR up to 21.237% and 27.166%, respectively, is achieved using the proposed methodology, compared to the experimental results. Confirmatory tests verify the effectiveness of the developed NN models by indicating an average error percentage of 3.353 and 2.662 in the prediction of MRR and SR, respectively. The performance comparison reveals the superiority of MOBO over two popular algorithms, namely multi-objective genetic algorithm (MOGA) and multi-objective particle swarm optimization algorithm (MOPSO), as well as multi-objective dragonfly algorithm (MODA), an algorithm recently used to solve the EDM problem.
- 19 January 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 240 (5) , 5092-5103
Performance assessment of nano-SiC-mixed electro discharge machining of Inconel 825
Inconel 825 is extensively utilized in corrosive environments; however, its low heat conductivity, work hardening and high-temperature strength make it difficult to machine. Electro discharge machining (EDM) is an advanced machining technique commonly utilized to machine Inconel 825 but its application is limited due to its high surface roughness and poor machining rate. Therefore, to enhance the machining capability of EDM, the present work uses deionized water with and without mixing nano-silicon carbide (SiC) particle as a dielectric medium during EDM of Inconel 825 and investigates the influence of powder concentration and current on key performance parameters such as surface roughness (Ra), tool wear rate (TWR), and material removal rate (MRR). In case of nano-SiC-mixed EDM, experiments are conducted by varying the current from 6A to 9A and the particle concentration from 0.5 g/L to 1.5 g/L. A comparative analysis of nano-SiC-mixed EDM with conventional EDM reveals that the nano-SiC-mixed dielectric medium improves MRR, TWR, and Ra by 40.42%, 7.60%, and 6.92%, respectively, on average. It has also been observed that adding SiC to the dielectric medium can improve MRR, TWR, and Ra up to 46.88%, 16.77%, and 8.96%, respectively. The minimum improvement of MRR, TWR, and Ra using the nano-SiC-mixed dielectric medium is 25.01%, 2.51%, and 5.45%, respectively. Further, the FESEM micrographs reveal fewer surface imperfections at particle concentration of 1 g/L while energy-dispersive X-ray spectroscopy analysis indicated minimal electrode material migration at this concentration.
- 19 January 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 240 (5) , 5092-5103
Performance assessment of nano-SiC-mixed electro discharge machining of Inconel 825
Inconel 825 is extensively utilized in corrosive environments; however, its low heat conductivity, work hardening and high-temperature strength make it difficult to machine. Electro discharge machining (EDM) is an advanced machining technique commonly utilized to machine Inconel 825 but its application is limited due to its high surface roughness and poor machining rate. Therefore, to enhance the machining capability of EDM, the present work uses deionized water with and without mixing nano-silicon carbide (SiC) particle as a dielectric medium during EDM of Inconel 825 and investigates the influence of powder concentration and current on key performance parameters such as surface roughness (Ra), tool wear rate (TWR), and material removal rate (MRR). In case of nano-SiC-mixed EDM, experiments are conducted by varying the current from 6A to 9A and the particle concentration from 0.5 g/L to 1.5 g/L. A comparative analysis of nano-SiC-mixed EDM with conventional EDM reveals that the nano-SiC-mixed dielectric medium improves MRR, TWR, and Ra by 40.42%, 7.60%, and 6.92%, respectively, on average. It has also been observed that adding SiC to the dielectric medium can improve MRR, TWR, and Ra up to 46.88%, 16.77%, and 8.96%, respectively. The minimum improvement of MRR, TWR, and Ra using the nano-SiC-mixed dielectric medium is 25.01%, 2.51%, and 5.45%, respectively. Further, the FESEM micrographs reveal fewer surface imperfections at particle concentration of 1 g/L while energy-dispersive X-ray spectroscopy analysis indicated minimal electrode material migration at this concentration.
- 23 November 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (15) , 12403-12448
An Improved Multi-Objective Harris Hawks Optimization Algorithm for Solving EDM Problems
- 23 November 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (15) , 12403-12448
An Improved Multi-Objective Harris Hawks Optimization Algorithm for Solving EDM Problems
- 30 June 2023
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 45 (7) , 1-19
A*-VG algorithm: a hybrid algorithm for the path planning of inspection robots
- 30 June 2023
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 45 (7) , 1-19
A*-VG algorithm: a hybrid algorithm for the path planning of inspection robots