Abdurrahman Telli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdurrahman Telli has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Osman Babaarslan
Department of Textile Engineering, Cukurova University, Adana, Turkey
3 shared publications- İlkan Özkan
Department of Textile Engineering, Cukurova University, Adana, Turkey
2 shared publications Mustafa Kebabci
1 shared publicationNilgün Özdil
Ege University, Department of Textile Engineering TURKEY
1 shared publicationNilgün Özdi̇l
1 shared publication- Osman Babaarslan
Çukurova University
1 shared publication
Latest Publications
- 13 October 2024
- Published by SAGE Publications in Textile Research Journal
- Vol. 95 (9-10) , 1044-1052
Investigation of the oxidative self- polymerization of dopamine under alkaline conditions on wool fabrics
Most studies about polydopamine in the textile field have been related to cotton fibers. There are not many studies about the use of polydopamine on wool fibers. A limited number of studies have focused on the coloring of wool, whereas wool is the fiber with the highest variety of intermolecular attraction forces among all natural and man-made fibers. Polydopamine contains high amounts of catechol and amine functional groups due to its structure. In this study, different from the literature, oxidative self-polymerization of dopamine was achieved on wool fabric for different periods of time, and the coated fabrics were examined with characterization tests and spectrophotometrically. In this study, lower values were obtained than lightness (L*) values reported for other fibers in previous studies, and it was concluded that the wool-PDA interaction is superior to other fibers. Scanning electron microscopy and energy-dispersive X-ray spectroscopy results showed that the polymerization and nano-coating formed successfully and continued to remain on the surface after washing. The lowest lightness value was obtained in the 32 h coating. However, the lowest color change after washing was in the 16 h coating (0.44%). This result showed that the coating was completed within 16–32 hours and there was only accumulation on the surface in the later times.
- 13 October 2024
- Published by SAGE Publications in Textile Research Journal
- Vol. 95 (9-10) , 1044-1052
Investigation of the oxidative self- polymerization of dopamine under alkaline conditions on wool fabrics
Most studies about polydopamine in the textile field have been related to cotton fibers. There are not many studies about the use of polydopamine on wool fibers. A limited number of studies have focused on the coloring of wool, whereas wool is the fiber with the highest variety of intermolecular attraction forces among all natural and man-made fibers. Polydopamine contains high amounts of catechol and amine functional groups due to its structure. In this study, different from the literature, oxidative self-polymerization of dopamine was achieved on wool fabric for different periods of time, and the coated fabrics were examined with characterization tests and spectrophotometrically. In this study, lower values were obtained than lightness (L*) values reported for other fibers in previous studies, and it was concluded that the wool-PDA interaction is superior to other fibers. Scanning electron microscopy and energy-dispersive X-ray spectroscopy results showed that the polymerization and nano-coating formed successfully and continued to remain on the surface after washing. The lowest lightness value was obtained in the 32 h coating. However, the lowest color change after washing was in the 16 h coating (0.44%). This result showed that the coating was completed within 16–32 hours and there was only accumulation on the surface in the later times.
- Open Access
- 28 December 2023
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 38 (4) , 899-905
The Evaluation of Uster Hairiness Results with an Image Analysis Approach
In this study, the images of the yarns were taken using a stereomicroscope. MATLAB software was used in image processing studies. The recommended image acquisition and processing steps in previous studies were followed, and the obtained results from textural parameters of images were compared with the results of Uster H and sh. The highest correlation in Uster H hairiness was obtained in the entropy textural parameter of the Sobel technique. The highest correlation in Uster sh hairiness was obtained in the mean of matrix elements (mean2) from the textural parameters in the Sobel technique. In general, higher correlation results were found in Uster sh than in Uster H. It has been observed that the Uster H results have deficiencies in determining the hairiness of dyed yarns. The different from the literature, this study presents that among the hairiness parameters, Uster sh shows the values closest to the real.
- 28 December 2023
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 38 (4) , 899-905
Open AccessThe Evaluation of Uster Hairiness Results with an Image Analysis Approach
In this study, the images of the yarns were taken using a stereomicroscope. MATLAB software was used in image processing studies. The recommended image acquisition and processing steps in previous studies were followed, and the obtained results from textural parameters of images were compared with the results of Uster H and sh. The highest correlation in Uster H hairiness was obtained in the entropy textural parameter of the Sobel technique. The highest correlation in Uster sh hairiness was obtained in the mean of matrix elements (mean2) from the textural parameters in the Sobel technique. In general, higher correlation results were found in Uster sh than in Uster H. It has been observed that the Uster H results have deficiencies in determining the hairiness of dyed yarns. The different from the literature, this study presents that among the hairiness parameters, Uster sh shows the values closest to the real.
- Open Access
- 30 March 2023
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 38 (1) , 131-142
Seçilmiş İpliklerde Zweigle İplik Tüylülüğü Sonuçlarına Farklı Test Hızlarının Etkisi
Bu çalışmada, Zweigle G657 cihazında iplik tüylülüğü sonuçlarına farklı test hızlarının etkisi araştırılmıştır. Ölçümler, cihazda seçenek olarak sunulan 25 m/dk, 50 m/dk, 100 m/dk ve 400 m/dk olmak üzere dört farklı test hızında gerçekleştirilmiştir. Test hızının etkisi SPSS programı kullanılarak istatistiki olarak incelenmiştir. İplik tüylülüğü sonuçları üzerinde, test hızındaki değişimin direkt olarak etkili olduğu görülmüştür. Tüylerin sınıflandırılmasında 10 mm’ye kadar, test hızları arasındaki farkın önemli seviyede olduğu görülmüştür. Aralarındaki bu farklılıklar 10 mm’den sonra önemsiz düzeye gelmiştir. Test hızı arttıkça ipliğin S3 tüylülük değerlerinde genel olarak bir artış eğilimi gözlenmiştir. Ancak bu çalışmada literatürden farklı olarak, çalışma için seçilen farklı yapıdaki ipliklerde farklı sonuçlarda elde edilmiştir. Farklı hızlarda elde edilen sonuçların karşılaştırma amaçlı kullanılmasının doğru olmayacağı net olarak görülmektedir. Yeni versiyon cihazlarda daha yüksek test hızlarına çıkma eğilimi bulunmaktadır. Bu nedenle, S3 tüylülüğü bilgisi verilirken, hangi cihazda ve hangi test hızında ölçüldüğü bilgisinin verilmesi gerektiği çıkarımı yapılmıştır.
- 30 March 2023
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 38 (1) , 131-142
Open AccessSeçilmiş İpliklerde Zweigle İplik Tüylülüğü Sonuçlarına Farklı Test Hızlarının Etkisi
Bu çalışmada, Zweigle G657 cihazında iplik tüylülüğü sonuçlarına farklı test hızlarının etkisi araştırılmıştır. Ölçümler, cihazda seçenek olarak sunulan 25 m/dk, 50 m/dk, 100 m/dk ve 400 m/dk olmak üzere dört farklı test hızında gerçekleştirilmiştir. Test hızının etkisi SPSS programı kullanılarak istatistiki olarak incelenmiştir. İplik tüylülüğü sonuçları üzerinde, test hızındaki değişimin direkt olarak etkili olduğu görülmüştür. Tüylerin sınıflandırılmasında 10 mm’ye kadar, test hızları arasındaki farkın önemli seviyede olduğu görülmüştür. Aralarındaki bu farklılıklar 10 mm’den sonra önemsiz düzeye gelmiştir. Test hızı arttıkça ipliğin S3 tüylülük değerlerinde genel olarak bir artış eğilimi gözlenmiştir. Ancak bu çalışmada literatürden farklı olarak, çalışma için seçilen farklı yapıdaki ipliklerde farklı sonuçlarda elde edilmiştir. Farklı hızlarda elde edilen sonuçların karşılaştırma amaçlı kullanılmasının doğru olmayacağı net olarak görülmektedir. Yeni versiyon cihazlarda daha yüksek test hızlarına çıkma eğilimi bulunmaktadır. Bu nedenle, S3 tüylülüğü bilgisi verilirken, hangi cihazda ve hangi test hızında ölçüldüğü bilgisinin verilmesi gerektiği çıkarımı yapılmıştır.
- Open Access
- 30 December 2022
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 29 (128) , 219-228
THE COMPARISON OF THE YARN HAIRINESS TEST DEVICES USING THE HAIRINESS LENGTH CLASSIFICATION SYSTEM
Yarn hairiness is an important element of total quality control. Zweigle system and its different versions are widely used commercially in the industry for the determination of yarn hairiness and these devices are only on hairiness. The measurement sensor on them classifies the hairs according to their length. In this research, Zweigle G567 and Uster Zweigle HL400 using the hairiness length classification system were compared. The most important difference between the two devices is that the recommended measuring speed for Uster Zweigle HL400 is eight times higher than Zweigle G567. In the study, thirteen yarns in different structures were used. The hairiness results in each mm were evaluated statistically in the SPSS program. It was observed that there were significant differences between the measurement results of two devices. In the literature, it is stated that there is an increase in the number of hairs with the increase in test speed of the Zweigle series hairiness devices. However, it was found in this study that there was a decrease in the number of hairs in most of the yarns measured in HL400 that use higher test speed. The more surprising result was that the strong correlation was determined between G567 and HL400 although the hair number obtained from devices show significant differences. This shows that the devices gave correlated results according to its operating principle, but the results of two devices operating at different speeds should not be compared with each other on the same test parameters.
- 30 December 2022
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 29 (128) , 219-228
Open AccessTHE COMPARISON OF THE YARN HAIRINESS TEST DEVICES USING THE HAIRINESS LENGTH CLASSIFICATION SYSTEM
Yarn hairiness is an important element of total quality control. Zweigle system and its different versions are widely used commercially in the industry for the determination of yarn hairiness and these devices are only on hairiness. The measurement sensor on them classifies the hairs according to their length. In this research, Zweigle G567 and Uster Zweigle HL400 using the hairiness length classification system were compared. The most important difference between the two devices is that the recommended measuring speed for Uster Zweigle HL400 is eight times higher than Zweigle G567. In the study, thirteen yarns in different structures were used. The hairiness results in each mm were evaluated statistically in the SPSS program. It was observed that there were significant differences between the measurement results of two devices. In the literature, it is stated that there is an increase in the number of hairs with the increase in test speed of the Zweigle series hairiness devices. However, it was found in this study that there was a decrease in the number of hairs in most of the yarns measured in HL400 that use higher test speed. The more surprising result was that the strong correlation was determined between G567 and HL400 although the hair number obtained from devices show significant differences. This shows that the devices gave correlated results according to its operating principle, but the results of two devices operating at different speeds should not be compared with each other on the same test parameters.
- 30 June 2021
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 31 (2) , 91-98
The Comparison of the Edge Detection Methods in the Determination of Yarn Hairiness through Image Processing
In this study, an image processing approach for the determination of yarn hairiness was presented. Yarn images taken under microscope were examined in MATLAB software. Seven different edge detection algorithms were used in order to separate the hairs from the yarn body accurately. Seven different textural properties of obtained yarn images were compared with Zweigle hairiness test results. The best hairiness results were obtained in Sobel and Prewitt edge detection methods. The findings have indicated that there were stronger correlation values for Sobel and Prewitt methods between Zweigle indices and four different textural features.
- 30 June 2021
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 31 (2) , 91-98
The Comparison of the Edge Detection Methods in the Determination of Yarn Hairiness through Image Processing
In this study, an image processing approach for the determination of yarn hairiness was presented. Yarn images taken under microscope were examined in MATLAB software. Seven different edge detection algorithms were used in order to separate the hairs from the yarn body accurately. Seven different textural properties of obtained yarn images were compared with Zweigle hairiness test results. The best hairiness results were obtained in Sobel and Prewitt edge detection methods. The findings have indicated that there were stronger correlation values for Sobel and Prewitt methods between Zweigle indices and four different textural features.
- 1 August 2020
- Published by Springer Nature in Fibers and Polymers
- Vol. 21 (8) , 1841-1848
The Relationship Between Subjective Pilling Evaluation Results and Detecting Pills and Textural Features in Knitted Fabrics
- 1 August 2020
- Published by Springer Nature in Fibers and Polymers
- Vol. 21 (8) , 1841-1848
The Relationship Between Subjective Pilling Evaluation Results and Detecting Pills and Textural Features in Knitted Fabrics
- Open Access
- 24 January 2020
- Published by Deu Muhendislik Fakultesi Fen ve Muhendislik in Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
- Vol. 22 (64) , 1-9
Metal İçerikli Hibrid İplik Üretiminde Eş Karıştırma Yönteminin Kullanımı
Çalışmada poliamid 6.6 iplikler ile bakır, gümüş ve paslanmaz çelik metal monofilamentler, puntalama makinesinde, eş karıştırma yöntemi ile birleştirilmiştir. Üretilen hibrid ipliklerin mikroskop görüntüleri alınmıştır. İpliklerde doğrusal yoğunluk tayini, kopma mukavemeti, kopma uzaması ve tüylülük ölçümleri gerçekleştirilmiştir. Metal filament kullanımının iplik kalite değerlerini olumsuz etkilediği görülmüştür. En iyi iplik özellikleri, çelik içerikli hibrid iplikte ölçülmüştür. Gümüş ve özellikle bakır içerikli hibrid iplik üretimlerinde filament kırılmaları gerçekleşmiştir. Bu filament kırılmalarının, ipliklerin daha sonraki dokuma veya örme gibi işlem adımlarında problem oluşturabilecek düzeyde olduğu görülmüştür. Daha sonraki çalışmalarda puntalama makinesi işlem parametreleri ve metal filament özellikleri üzerinde yapılacak değişiklikler ile iplik özellikleri optimize edilebilecektir. Bu şekilde metal filamentler içeren hibrid ipliklerin üretimine hızlı ve düşük maliyetli alternatif bir yöntem oluşacaktır.
- 24 January 2020
- Published by Deu Muhendislik Fakultesi Fen ve Muhendislik in Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
- Vol. 22 (64) , 1-9
Open AccessMetal İçerikli Hibrid İplik Üretiminde Eş Karıştırma Yönteminin Kullanımı
Çalışmada poliamid 6.6 iplikler ile bakır, gümüş ve paslanmaz çelik metal monofilamentler, puntalama makinesinde, eş karıştırma yöntemi ile birleştirilmiştir. Üretilen hibrid ipliklerin mikroskop görüntüleri alınmıştır. İpliklerde doğrusal yoğunluk tayini, kopma mukavemeti, kopma uzaması ve tüylülük ölçümleri gerçekleştirilmiştir. Metal filament kullanımının iplik kalite değerlerini olumsuz etkilediği görülmüştür. En iyi iplik özellikleri, çelik içerikli hibrid iplikte ölçülmüştür. Gümüş ve özellikle bakır içerikli hibrid iplik üretimlerinde filament kırılmaları gerçekleşmiştir. Bu filament kırılmalarının, ipliklerin daha sonraki dokuma veya örme gibi işlem adımlarında problem oluşturabilecek düzeyde olduğu görülmüştür. Daha sonraki çalışmalarda puntalama makinesi işlem parametreleri ve metal filament özellikleri üzerinde yapılacak değişiklikler ile iplik özellikleri optimize edilebilecektir. Bu şekilde metal filamentler içeren hibrid ipliklerin üretimine hızlı ve düşük maliyetli alternatif bir yöntem oluşacaktır.
- Open Access
- 30 September 2019
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 29 (3) , 268-276
AN IMAGE PROCESSING RESEARCH CONSISTENT WITH STANDARD PHOTOGRAPHS TO DETERMINE PILLING GRADE OF WOVEN FABRICS
In this study, MATLAB 2018a software was used to evaluate pilling grade of woven fabrics objectively. Experimental works were carried out on the EMPA W3 standard photographs and accordingly two woven fabrics. Equations were built based on the measurements of pill characteristics and textural parameters of these photographs with the help of curve fitting method after image processing steps. Intervals were generated for each fabric by using slope of these equations and quantitative parameters obtained from the original fabric. Furthermore, fabrics that were provided pilling formation at different test turns were evaluated subjectively by expert operators. Objective results corresponding to each parameter were analyzed comparatively with these subjective results. The developed method was successful by using mean of matrix elements from textural parameters and total area from pill characteristics.
- 30 September 2019
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 29 (3) , 268-276
Open AccessAN IMAGE PROCESSING RESEARCH CONSISTENT WITH STANDARD PHOTOGRAPHS TO DETERMINE PILLING GRADE OF WOVEN FABRICS
In this study, MATLAB 2018a software was used to evaluate pilling grade of woven fabrics objectively. Experimental works were carried out on the EMPA W3 standard photographs and accordingly two woven fabrics. Equations were built based on the measurements of pill characteristics and textural parameters of these photographs with the help of curve fitting method after image processing steps. Intervals were generated for each fabric by using slope of these equations and quantitative parameters obtained from the original fabric. Furthermore, fabrics that were provided pilling formation at different test turns were evaluated subjectively by expert operators. Objective results corresponding to each parameter were analyzed comparatively with these subjective results. The developed method was successful by using mean of matrix elements from textural parameters and total area from pill characteristics.
- Open Access
- 1 January 2019
- Published by SAGE Publications in Journal of Engineered Fibers and Fabrics
- Vol. 14
The effects of metal type, number of layers, and hybrid yarn placement on the absorption and reflection properties in electromagnetic shielding of woven fabrics
In this study, stainless steel, copper, and silver wires were intermingled with two polyamide 6.6 filaments through the commingling technique to produce three-component hybrid yarns. The produced hybrid yarns were used as weft in the structure of plain woven fabric samples. The electromagnetic shielding effectiveness parameters of samples were measured in the frequency range of 0.8–5.2 GHz by the free space technique. The effects of metal hybrid yarn placement, number of fabric layers, metal types, and wave polarization on the electromagnetic shielding effectiveness and absorption and reflection properties of the woven fabrics were analyzed statistically at low and high frequencies separately. As a result, the samples have no shielding property in the warp direction. Metal types show no statistically significant effect on electromagnetic shielding effectiveness. However, fabrics containing stainless steel have a higher absorption power ratio than copper and silver samples. Double-layer samples have higher electromagnetic shielding effectiveness values than single-layer fabrics in both frequency ranges. However, the number of layers does not have a significant effect on the absorbed and reflected power in the range of 0.8–2.6 GHz. There was a significant difference above 2.6 GHz frequency for absorbed power ratio. An increase in the density of hybrid yarns in the fabric structure leads to an increase in the electromagnetic shielding effectiveness values. Two-metal placement has a higher absorbed power than the full and one-metal placements, respectively. The samples which have double layers and including metal wire were in their all wefts reached the maximum electromagnetic shielding effectiveness values for stainless steel (78.70 dB), copper (72.69 dB), and silver composite (57.50 dB) fabrics.
- 1 January 2019
- Published by SAGE Publications in Journal of Engineered Fibers and Fabrics
- Vol. 14
Open AccessThe effects of metal type, number of layers, and hybrid yarn placement on the absorption and reflection properties in electromagnetic shielding of woven fabrics
In this study, stainless steel, copper, and silver wires were intermingled with two polyamide 6.6 filaments through the commingling technique to produce three-component hybrid yarns. The produced hybrid yarns were used as weft in the structure of plain woven fabric samples. The electromagnetic shielding effectiveness parameters of samples were measured in the frequency range of 0.8–5.2 GHz by the free space technique. The effects of metal hybrid yarn placement, number of fabric layers, metal types, and wave polarization on the electromagnetic shielding effectiveness and absorption and reflection properties of the woven fabrics were analyzed statistically at low and high frequencies separately. As a result, the samples have no shielding property in the warp direction. Metal types show no statistically significant effect on electromagnetic shielding effectiveness. However, fabrics containing stainless steel have a higher absorption power ratio than copper and silver samples. Double-layer samples have higher electromagnetic shielding effectiveness values than single-layer fabrics in both frequency ranges. However, the number of layers does not have a significant effect on the absorbed and reflected power in the range of 0.8–2.6 GHz. There was a significant difference above 2.6 GHz frequency for absorbed power ratio. An increase in the density of hybrid yarns in the fabric structure leads to an increase in the electromagnetic shielding effectiveness values. Two-metal placement has a higher absorbed power than the full and one-metal placements, respectively. The samples which have double layers and including metal wire were in their all wefts reached the maximum electromagnetic shielding effectiveness values for stainless steel (78.70 dB), copper (72.69 dB), and silver composite (57.50 dB) fabrics.
- 8 June 2016
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 108 (5) , 812-820
The effect of recycled fibers on the washing performance of denim fabrics
In this study, denim fabrics were produced with yarns obtained from cotton fibers (CO), recycled cotton fibers obtained from yarn wastes (r-CO), and fibers produced from recycled PET bottles (r-PET). Enzyme and stone washing processes were applied systematically on these fabrics. Mass per unit area, breaking force, elongation at max force, tear strength, air permeability, and circular bending rigidity of fabrics were measured. The findings showed that r-CO fiber has negative effect on tear and breaking force. Breaking force, elongation at max force, and tear strength values of the fabrics increased depending on the increase in r-PET content. However, fabric handle was negatively affected associated with the r-PET ratio due to the increase in stiffness. Mass per unit area, breaking force, air permeability, and circular bending rigidity values of fabrics decreased after the washing processes. The effect of fibers on enzyme- or stone-washed fabrics showed a change according to finished fabrics. It can be said that fabrics containing r-PET are more resistant than cotton and recycled cotton in various aggressive denim washing methods such as bleaching or different washing process conditions such as rising temperature, and time.
- 8 June 2016
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 108 (5) , 812-820
The effect of recycled fibers on the washing performance of denim fabrics
In this study, denim fabrics were produced with yarns obtained from cotton fibers (CO), recycled cotton fibers obtained from yarn wastes (r-CO), and fibers produced from recycled PET bottles (r-PET). Enzyme and stone washing processes were applied systematically on these fabrics. Mass per unit area, breaking force, elongation at max force, tear strength, air permeability, and circular bending rigidity of fabrics were measured. The findings showed that r-CO fiber has negative effect on tear and breaking force. Breaking force, elongation at max force, and tear strength values of the fabrics increased depending on the increase in r-PET content. However, fabric handle was negatively affected associated with the r-PET ratio due to the increase in stiffness. Mass per unit area, breaking force, air permeability, and circular bending rigidity values of fabrics decreased after the washing processes. The effect of fibers on enzyme- or stone-washed fabrics showed a change according to finished fabrics. It can be said that fabrics containing r-PET are more resistant than cotton and recycled cotton in various aggressive denim washing methods such as bleaching or different washing process conditions such as rising temperature, and time.