MRMichael Rudolf

Michael Rudolf

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Michael Rudolf has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analogue modelling in Geosciences uncovered: a textbook for modern minds

    by Francesca Funiciello, Susanne Buiter, Fabio Corbi, Riccardo Reitano, Matthias Rosenau, Michael Rudolf, Ernst Willingshofer, Frank Zwaan

    Analogue modeling for Earth Sciences started over two centuries ago as an explorative technique that allowed for the first time unfolding and visualizing a wide range of tectonic processes. While this character remains a compelling feature of analogue models, this experimental methodology has evolved over the last few decades into a quantitative, reproducible and reliable method. Most recent developments aredispersed across scientific journal articles, many behind pay-walls and sometimes hidden in appendices, but no open-access overview exists that brings all this knowledge together.In the context of the EU research infrastructure EPOS, we are preparing the first comprehensive guide (SPRINGER will publish that as open access) on the state-of-the-art in analogue modeling of geologic processes. This community-built book will be organized into three sections. The first section will serve as a “cookbook” for building analogue models, offering up-to-date guide on scaling down models, selecting suitable analog materials, collecting experimental data, and interpreting those results. The second section will focus on a variety of tectonic processes that can be reproduced in the lab and analyzed using analogue modelling. The final section will emphasize the importance of sharing experimental research data through Open Access data publications and illustrate how analogue models can enhance the Earth Science teaching experience in classrooms. This book will fill a significant gap in the scholarly literature and will serve as a reference and guide for both early-career and experienced researchers as well as reaching out to a broader community of educational and academic teachers. In this presentation, we will share our journey toward this community-effort and give examples of the different sections of the book.

  • Open Access

    Inversion-based Time Series Analysis of PS-InSAR Data: Uncovering the Origins of Subsidence and Annual Fluctuations in Southern Hesse, Germany

    by Michael Rudolf, Katrin Krzepek, Benjamin Homuth, Dorota Iwaszczuk, Andreas Henk

    The uplift and subsidence of the earth's surface can be attributed to many different processes. In urban regions in particular, it is important to understand which ground movements occur, whether they pose a risk to infrastructure and whether countermeasures can be taken. While events such as earthquakes, sinkholes and landslides have abrupt and visible effects, slow ground movements such as slope instabilities and tectonic movements are difficult to detect and it can take decades for visible damage to occur. Remote sensing, especially InSAR and Persistent Scatterer InSAR, provides high spatial and temporal coverage for monitoring these processes. The state of Hesse in central Germany is confronted with various ground movements, including former open-cast lignite mines, active salt mining and landslide-prone geological units. Our study aims to explore previously unknown ground movements in urban regions using remote sensing, analyse detected areas, determine causes, assess risks and anticipate future developments. We use Persistent Scatterer Interferometry (PS-InSAR) data from the Ground Motion Service Germany (BBD) to analyse ground motion patterns. With the help of a Ground Motion Analyser (GMA), time series analysis and external data, we identify regions with significant ground movements throughout the federal state. A case study in Frankfurt am Main, located on the northern edge of the Upper Rhine Graben, shows subsidence that was probably caused by groundwater extraction during the construction of buildings. Another case study in Crumstadt, in the centre of the northern Upper Rhine Graben, shows pronounced seasonal fluctuations, possibly related to temperature and activity in an underground gas reservoir. In both cases, an analysis of external data such as groundwater levels, climate data, construction activity, mining activities, hydrogeological and geological conditions must be taken into account. The ground movements caused by the various possible causes can sometimes be very similar, so a solid external database is particularly important. With the help of the results, the ground movements measured by remote sensing can be linked both qualitatively and quantitatively with the regional conditions. Our results thus contribute to understanding and mitigating the effects of ground movements and underline the importance of analysing both time-varying movements and linear velocities in parallel with external data.

  • Open Access

    Identification and Analysis of Anomalous Ground Movements in Urban and Rural Areas Using Persistent Scatterer Interferometry in Southern Hesse, Germany

    by Michael Rudolf, Katrin Krzepek, Benjamin Homuth, Andreas Henk, Dorota Iwaszczuk

    Thanks to the open publication in recent years, the general public can now view and evaluate ground motion data. However, the data offered in web portals are often only optimized for display, and there is no automatic detection of hotspots and their analysis. In this study, ground motion patterns are investigated using Persistent Scatterer Interferometry data from the Ground Motion Service Germany. We focus on the identification of regions with significant ground motion in cities using a Ground Motion Analyzer, time series analysis and external data. A case study in Frankfurt am Main shows significant subsidence in the city presumably due to groundwater extraction during the construction phase of various buildings. Another case study in Crumstadt in the northern Upper Rhine Graben reveals pronounced seasonal fluctuations, probably due to factors such as temperature and activity in a nearby underground storage facility. We show that it is important to include external data such as temperature, precipitation and gas storage levels in order to comprehensively analyze the causes of ground movements. Our results contribute to understanding and mitigating the effects of ground motion and highlight the need to analyze time-varying motion in addition to linear velocities.


  • Open Access

    Detection and classification of large-scale ground motion from remote sensing data: A case study in Hesse, Germany

    by Michael Rudolf, Katrin Krzepek, Torben Treffeisen, Benjamin Homuth, Dorota Iwaszczuk, Andreas Henk

    Large-scale subsidence and uplift pose a significant risk to buildings and infrastructure. While subsidence due to groundwater removal or construction activities can easily be constrained on a local scale, regional changes caused by climate change are more difficult to detect. These phenomena are investigated within the „Umwelt 4.0, Cluster I - Use of digital terrain models and Copernicus data" project, which is carried out by the Hessian Agency for Nature Conservation, Environment and Geology in cooperation with the TU Darmstadt and funded by the Hessian Minister for Digital Strategy and Development. Within the framework of this project, we are creating a systematic workflow to detect ground motion over a period of several years. We focus on the state of Hessen, Germany, where several regions are known for landslide activity, e.g., Hoher Meissner, or for widespread subsidence, e.g., in the industrial areas surrounding Frankfurt a.M.. In this way, occurring ground movements and even mass movements could be detected at an early stage and, if necessary, measures can be initiated. Based on these results, future decisions on regulations or even information for the general public on risk areas can be created.We utilize two major datasets based on remote sensing. High-resolution digital elevation and surface models (DGM 1 and DSM 1) from airborne LiDAR surveys by the Hessian Administration for Land Management and Geoinformation. For the most parts of Hessen, it was possible to calculate differences in elevation between the years 2014, 2019 and 2021. The second dataset are persistent scatterer interferometry points (PSIs) from the BodenBewegungsdienst Deutschland with a temporal resolution of 6 days since 2015. Both datasets are integrated and linked with other data sources, such as geological maps, known subsidence-sensitive layers, hydrogeological and climatic data. For the InSAR data a toolbox has been developed that automatically detects regions with strong movement (Ground Motion Analyzer). A major challenge for integrating both datasets is the large difference in spatial coverage and temporal resolution. Advantages of LiDAR data are the high spatial resolution and the possibility to detect even small-scale movements (<5 x 5 m) below vegetation cover, for example the re-tracing of forest roads or the creation of logging trails. A disadvantage is the low temporal resolution of several years between flights in comparison with the 6 days of the PSI data. From the latter, even seasonal variations can be detected and measured. However, the spatial distribution of the points is highly heterogeneous, so in cities the point density is very high, whereas in rural areas hardly any measurements exist. Other problems are the strong fluctuations both within a time series of a single PSI point and between neighbouring points.With our contribution we want to highlight a typical use case of both data sets and their implementation into regulatory decision-making processes. Furthermore, we want to show a possible integrative method combining remote sensing data with ground based geoinformation and future use of advanced classification schemes to automatically detect affected regions in big datasets.

  • Open Access

    Time-dependent frictional properties of granular materials used in analogue modelling: implications for mimicking fault healing during reactivation and inversion

    by Michael Rudolf, Matthias Rosenau, Onno Oncken

    Analogue models are often used to model long-term geological processes such as mountain building or basin inversion. Most of these models use granular materials such as sand or glass beads to simulate the brittle behaviour of the crust. In granular material, deformation is localised in shear bands, which act as an analogue to natural fault zones and detachments. Shear bands, also known as faults, are permanent anomalies in the granular package and are often reactivated during a test run. This is due to their lower strength compared to the undeformed material. When the fault movement stops, time-dependent healing immediately begins to increase the strength of the fault. Faults that have been inactive for a long time therefore have a higher strength than younger faults. This time-dependent healing, also called time consolidation, can therefore affect the structure of an analogue model as the strength of the fault changes over time. Time consolidation is a well-known mechanism in granular mechanics, but it is poorly described for analogue materials and on the timescales of typical analogue models. In this study, we estimate the healing rate of different analogue materials and evaluate the impact on the reactivation potential of analogue faults. We find that healing rates are generally less than 3 % per 10-fold increase in holding time, which is comparable to natural fault zones. We qualitatively compare the frictional properties of the materials with grain characteristics and find a weak correlation of healing rates with sphericity and friction with an average quality score. Accordingly, in models where there are predefined faults or reactivation is forced by blocks, the stability range of the fault angles that can be reactivated can decrease by up to 7∘ over the duration of 12 h. The stress required to reactivate an existing fault can double in the same time, which can favour the development of new faults. In a basin inversion scenario, normal faults cannot be inverted because of the strong misorientation, so time consolidation plays little additional role for such models.


  • Open Access

    Reply on RC1

    by Michael Rudolf, Matthias Rosenau, Onno Oncken

    Analogue models are commonly used to model long-term geological processes such as mountain building or basin inversion. The majority of these models use granular materials like sand or glass beads to simulate the brittle behaviour of the crust. In granular materials deformation is localized into shear bands that act as analogues to natural fault zones and detachments. Shear bands aka faults are persistent anomalies in the granular package and are frequently reactivated during an experimental run. This is due to their lower strength in comparison to the undeformed bulk material. When fault motion stops, time dependent healing immediately starts to increase the strength of the fault. Therefore, older faults show a higher strength in comparison to younger faults. This time dependent healing, also called time consolidation, can therefore affect the structural style of an analogue model due to evolution of fault strength over time. Time consolidation is a well known mechanism in granular mechanics but remains poorly characterized for analogue materials and on the timescales of typical analogue models. In this study, we estimate the healing rate of several analogue materials and evaluate the consequences on the reactivation potential of analogue faults. We find that the healing rates are generally below 3 % per tenfold increase in hold time which is comparable to natural fault zones. We qualitatively compare the frictional properties of the materials with grain characteristics and find a weak correlation of healing rates with sphericity and friction with an average quality score. In models where predefined faults exist or reactivation is forced by blocks, the stability region of fault angles that can be reactivated can accordingly decrease by up to 7° over the duration of 12 hours. The stress required to reactivate a preexisting fault can double in the same time which may favor the creation of new faults. In a basin inversion scenario, normal faults can not be inverted due to severe misorientation and therefore time consolidation plays only a minor additional role for such models.

  • Open Access

    Reply on RC2

    by Michael Rudolf, Matthias Rosenau, Onno Oncken

    Analogue models are commonly used to model long-term geological processes such as mountain building or basin inversion. The majority of these models use granular materials like sand or glass beads to simulate the brittle behaviour of the crust. In granular materials deformation is localized into shear bands that act as analogues to natural fault zones and detachments. Shear bands aka faults are persistent anomalies in the granular package and are frequently reactivated during an experimental run. This is due to their lower strength in comparison to the undeformed bulk material. When fault motion stops, time dependent healing immediately starts to increase the strength of the fault. Therefore, older faults show a higher strength in comparison to younger faults. This time dependent healing, also called time consolidation, can therefore affect the structural style of an analogue model due to evolution of fault strength over time. Time consolidation is a well known mechanism in granular mechanics but remains poorly characterized for analogue materials and on the timescales of typical analogue models. In this study, we estimate the healing rate of several analogue materials and evaluate the consequences on the reactivation potential of analogue faults. We find that the healing rates are generally below 3 % per tenfold increase in hold time which is comparable to natural fault zones. We qualitatively compare the frictional properties of the materials with grain characteristics and find a weak correlation of healing rates with sphericity and friction with an average quality score. In models where predefined faults exist or reactivation is forced by blocks, the stability region of fault angles that can be reactivated can accordingly decrease by up to 7° over the duration of 12 hours. The stress required to reactivate a preexisting fault can double in the same time which may favor the creation of new faults. In a basin inversion scenario, normal faults can not be inverted due to severe misorientation and therefore time consolidation plays only a minor additional role for such models.

  • Open Access

    Comment on egusphere-2022-1178

    by Michael Rudolf, Matthias Rosenau, Onno Oncken

    Analogue models are commonly used to model long-term geological processes such as mountain building or basin inversion. The majority of these models use granular materials like sand or glass beads to simulate the brittle behaviour of the crust. In granular materials deformation is localized into shear bands that act as analogues to natural fault zones and detachments. Shear bands aka faults are persistent anomalies in the granular package and are frequently reactivated during an experimental run. This is due to their lower strength in comparison to the undeformed bulk material. When fault motion stops, time dependent healing immediately starts to increase the strength of the fault. Therefore, older faults show a higher strength in comparison to younger faults. This time dependent healing, also called time consolidation, can therefore affect the structural style of an analogue model due to evolution of fault strength over time. Time consolidation is a well known mechanism in granular mechanics but remains poorly characterized for analogue materials and on the timescales of typical analogue models. In this study, we estimate the healing rate of several analogue materials and evaluate the consequences on the reactivation potential of analogue faults. We find that the healing rates are generally below 3 % per tenfold increase in hold time which is comparable to natural fault zones. We qualitatively compare the frictional properties of the materials with grain characteristics and find a weak correlation of healing rates with sphericity and friction with an average quality score. In models where predefined faults exist or reactivation is forced by blocks, the stability region of fault angles that can be reactivated can accordingly decrease by up to 7° over the duration of 12 hours. The stress required to reactivate a preexisting fault can double in the same time which may favor the creation of new faults. In a basin inversion scenario, normal faults can not be inverted due to severe misorientation and therefore time consolidation plays only a minor additional role for such models.

  • Open Access

    Analogue modelling of basin inversion: a review and future perspectives

    by Frank Zwaan, Guido Schreurs, Susanne J. H. Buiter, Oriol Ferrer, Riccardo Reitano, Michael Rudolf, Ernst Willingshofer

    Basin inversion involves the reversal of subsidence in a basin due to compressional tectonic forces, leading to uplift of the basin's sedimentary infill. Detailed knowledge of basin inversion is of great importance for scientific, societal, and economic reasons, spurring continued research efforts to better understand the processes involved. Analogue tectonic modelling forms a key part of these efforts, and analogue modellers have conducted numerous studies of basin inversion. In this review paper we recap the advances in our knowledge of basin inversion processes acquired through analogue modelling studies, providing an up-to-date summary of the state of analogue modelling of basin inversion. We describe the different definitions of basin inversion that are being applied by researchers, why basin inversion has been historically an important research topic and what the general mechanics involved in basin inversion are. We subsequently treat the wide range of different experimental approaches used for basin inversion modelling, with attention to the various materials, set-ups, and techniques used for model monitoring and analysing the model results. Our new systematic overviews of generalized model results reveal the diversity of these results, which depend greatly on the chosen set-up, model layering and (oblique) kinematics of inversion, and 3D along-strike structural and kinematic variations in the system. We show how analogue modelling results are in good agreement with numerical models, and how these results help researchers to better understand natural examples of basin inversion. In addition to reviewing the past efforts in the field of analogue modelling, we also shed light on future modelling challenges and identify a number of opportunities for follow-up research. These include the testing of force boundary conditions, adding geological processes such as sedimentation, transport, and erosion; applying state-of-the-art modelling and quantification techniques; and establishing best modelling practices. We also suggest expanding the scope of basin inversion modelling beyond the traditional upper crustal “North Sea style” of inversion, which may contribute to the ongoing search for clean energy resources. It follows that basin inversion modelling can bring valuable new insights, providing a great incentive to continue our efforts in this field. We therefore hope that this review paper will form an inspiration for future analogue modelling studies of basin inversion.


  • Open Access

    Time-dependent Frictional Properties of Granular Materials Used In Analogue Modelling: Implications for mimicking fault healing during reactivation and inversion

    by Michael Rudolf, Matthias Rosenau, Onno Oncken

    Analogue models are commonly used to model long-term geological processes such as mountain building or basin inversion. The majority of these models use granular materials like sand or glass beads to simulate the brittle behaviour of the crust. In granular materials deformation is localized into shear bands that act as analogues to natural fault zones and detachments. Shear bands aka faults are persistent anomalies in the granular package and are frequently reactivated during an experimental run. This is due to their lower strength in comparison to the undeformed bulk material. When fault motion stops, time dependent healing immediately starts to increase the strength of the fault. Therefore, older faults show a higher strength in comparison to younger faults. This time dependent healing, also called time consolidation, can therefore affect the structural style of an analogue model due to evolution of fault strength over time. Time consolidation is a well known mechanism in granular mechanics but remains poorly characterized for analogue materials and on the timescales of typical analogue models. In this study, we estimate the healing rate of several analogue materials and evaluate the consequences on the reactivation potential of analogue faults. We find that the healing rates are generally below 3 % per tenfold increase in hold time which is comparable to natural fault zones. We qualitatively compare the frictional properties of the materials with grain characteristics and find a weak correlation of healing rates with sphericity and friction with an average quality score. In models where predefined faults exist or reactivation is forced by blocks, the stability region of fault angles that can be reactivated can accordingly decrease by up to 7° over the duration of 12 hours. The stress required to reactivate a preexisting fault can double in the same time which may favor the creation of new faults. In a basin inversion scenario, normal faults can not be inverted due to severe misorientation and therefore time consolidation plays only a minor additional role for such models.