DBDanilo Bürger

Danilo Bürger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Danilo Bürger has a total of 230 co-authors. Here are the top co-authors by number of shared publications:

  • Heidemarie Schmidt

    Department Back-End of Line, Fraunhofer Institute for Electronic Nano Systems 1 , 09126 Chemnitz, Germany

    27 shared publications
  • Shengqiang Zhou

    Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstrasse 400, 01328 Dresden, Germany

    25 shared publications
  • Oliver. G. Schmidt

    Material Systems for Nanoelectronics Chemnitz University of Technology Chemnitz Germany

    20 shared publications
  • Ilona Skorupa

    Institute of Ion Beam Physics and Materials Research 3 , Helmholtz-Zentrum Dresden-Rossendorf e.V., 01328 Dresden

    18 shared publications
  • Nan Du

    Institute for Solid State Physics, Friedrich Schiller University Jena, Jena, Germany

    17 shared publications
  • Manfred Helm

    Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf, P. O. Box 510119, Dresden 01314, Germany

    13 shared publications

Latest Publications

  • Open Access

    Polarity dependent predictable and random resistive switching in forming-free unipolar memristors

    by Venkata Rao Rayapati, Sahitya Varma Vegesna, Vinayak Jayram Bhat, Daniel Blaschke, Marco Diegel, Andrea Dellith, Jan Dellith, Danilo Bürger, Ilona Skorupa, Heidemarie Schmidt

    Polycrystalline, hexagonal HoMnO3 thin films sandwiched between an un-patterned Pt/Ti bottom electrode and a circularly patterned Al top electrode reveal forming-free, polarity dependent predictable and random, unipolar resistive switching with stable retention, and a resistance ratio between high resistance state (HRS) and low resistance state (LRS) larger than 104. An equivalent circuit model is proposed to describe the HoMnO3 memristor as a three-layered capacitor structure. Based on the energy band diagram of the HoMnO3 structure under applied negative and positive write bias, polarity dependent, predictable, and random resistive switching is explained. Furthermore, the conductance in LRS until RESET and in HRS until SET has been investigated. The conductance in LRS is large and constant until RESET bias is reached. The conductance in HRS increases from nearly zero to quantum conductance G0 (2e2/h) until SET bias is reached.

  • Open Access

    Towards Bacteria Counting in DI Water of Several Microliters or Growing Suspension Using Impedance Biochips

    by Mahdi Kiani, Astrid Tannert, Nan Du, Uwe Hübner, Ilona Skorupa, Danilo Bürger, Xianyue Zhao, Daniel Blaschke, Lars Rebohle, Charaf Cherkouk, et al.

    We counted bacterial cells of E. coli strain K12 in several-microliter DI water or in several-microliter PBS in the low optical density (OD) range (OD = 0.05–1.08) in contact with the surface of Si-based impedance biochips with ring electrodes by impedance measurements. The multiparameter fit of the impedance data allowed calibration of the impedance data with the concentration cb of the E. coli cells in the range of cb = 0.06 to 1.26 × 109 cells/mL. The results showed that for E. coli in DI water and in PBS, the modelled impedance parameters depend linearly on the concentration of cells in the range of cb = 0.06 to 1.26 × 109 cells/mL, whereas the OD, which was independently measured with a spectrophotometer, was only linearly dependent on the concentration of the E. coli cells in the range of cb = 0.06 to 0.50 × 109 cells/mL.


  • Open Access

    Increased static dielectric constant in ZnMnO and ZnCoO thin films with bound magnetic polarons

    by Sahitya V. Vegesna, Vinayak J. Bhat, Danilo Bürger, Jan Dellith, Ilona Skorupa, Oliver G. Schmidt, Heidemarie Schmidt

    A novel small signal equivalent circuit model is proposed in the inversion regime of metal/(ZnO, ZnMnO, and ZnCoO) semiconductor/Si3N4 insulator/p-Si semiconductor (MSIS) structures to describe the distinctive nonlinear frequency dependent capacitance (C-F) and conductance (G-F) behaviour in the frequency range from 50 Hz to 1 MHz. We modelled the fully depleted ZnO thin films to extract the static dielectric constant (εr) of ZnO, ZnMnO, and ZnCoO. The extracted enhancement of static dielectric constant in magnetic n-type conducting ZnCoO (εr ≥ 13.0) and ZnMnO (εr ≥ 25.8) in comparison to unmagnetic ZnO (εr = 8.3–9.3) is related to the electrical polarizability of donor-type bound magnetic polarons (BMP) in the several hundred GHz range (120 GHz for CdMnTe). The formation of donor-BMP is enabled in n-type conducting, magnetic ZnO by the s-d exchange interaction between the electron spin of positively charged oxygen vacancies $${V}_{o}^{+}$$Vo+ in the BMP center and the electron spins of substitutional Mn2+ and Co2+ ions in ZnMnO and ZnCoO, respectively. The BMP radius scales with the Bohr radius which is proportional to the static dielectric constant. Here we show how BMP overlap can be realized in magnetic n-ZnO by increasing its static dielectric constant and guide researchers in the field of transparent spintronics towards ferromagnetism in magnetic, n-ZnO.


  • Open Access

    Charged domains in ferroelectric, polycrystalline yttrium manganite thin films resolved with scanning electron microscopy

    by Venkata Rao Rayapati, Danilo Bürger, Nan Du, Cornelia Kowol, Daniel Blaschke, Hartmut Stöcker, Patrick Matthes, Rajkumar Patra, Ilona Skorupa, Stefan E Schulz, et al.

    We have investigated ferroelectric charged domains in polycrystalline hexagonal yttrium manganite thin films (Y1Mn1O3, Y0.95Mn1.05O3, Y1Mn0.99Ti0.01O3, and Y0.94Mn1.05Ti0.01O3) by scanning electron microscopy (SEM) in secondary electron emission mode with a small acceleration voltage. Using SEM at an acceleration voltage of 1.0 kV otherwise homogenous surface charging effects are reduced, polarization charges can be observed and polarization directions (±Pz) of the ferroelectric domains in the polycrystalline thin films can be identified. Thin films of different chemical composition have been deposited by pulsed laser deposition on Pt/SiO2/Si structures under otherwise same growth conditions. Using SEM it has been shown that different charged domain density networks are existing in polycrystalline yttrium manganite thin films.


  • Open Access

    Disturbing-Free Determination of Yeast Concentration in DI Water and in Glucose Using Impedance Biochips

    by Mahdi Kiani, Nan Du, Manja Vogel, Johannes Raff, Uwe Hübner, Ilona Skorupa, Danilo Bürger, Stefan E. Schulz, Oliver G. Schmidt, Daniel Blaschke, et al.

    Deionized water and glucose without yeast and with yeast (Saccharomyces cerevisiae) of optical density OD600 that ranges from 4 to 16 has been put in the ring electrode region of six different types of impedance biochips and impedance has been measured in dependence on the added volume (20, 21, 22, 23, 24, 25 µL). The measured impedance of two out of the six types of biochips is strongly sensitive to the addition of both liquid without yeast and liquid with yeast and modelled impedance reveals a linear relationship between the impedance model parameters and yeast concentration. The presented biochips allow for continuous impedance measurements without interrupting the cultivation of the yeast. A multiparameter fit of the impedance model parameters allows for determining the concentration of yeast (cy) in the range from cy = 3.3 × 107 to cy = 17 × 107 cells/mL. This work shows that independent on the liquid, i.e., DI water or glucose, the impedance model parameters of the two most sensitive types of biochips with liquid without yeast and with liquid with yeast are clearly distinguishable for the two most sensitive types of biochips.


  • Open Access

    P-N Junction-Based Si Biochips with Ring Electrodes for Novel Biosensing Applications

    by Mahdi Kiani, Nan Du, Manja Vogel, Johannes Raff, Uwe Hübner, Ilona Skorupa, Danilo Bürger, Stefan E. Schulz, Oliver G. Schmidt, Heidemarie Schmidt

    In this work, we report on the impedance of p-n junction-based Si biochips with gold ring top electrodes and unstructured platinum bottom electrodes which allows for counting target biomaterial in a liquid-filled ring top electrode region. The systematic experiments on p-n junction-based Si biochips fabricated by two different sets of implantation parameters (i.e. biochips PS5 and BS5) are studied, and the comparable significant change of impedance characteristics in the biochips in dependence on the number of bacteria suspension, i.e., Lysinibacillus sphaericus JG-A12, in Deionized water with an optical density at 600 nm from OD600 = 4–16 in the electrode ring region is demonstrated. Furthermore, with the help of the newly developed two-phase electrode structure, the modeled capacitance and resistance parameters of the electrical equivalent circuit describing the p-n junction-based biochips depend linearly on the number of bacteria in the ring top electrode region, which successfully proves the potential performance of p-n junction-based Si biochips in observing the bacterial suspension. The proposed p-n junction-based biochips reveal perspective applications in medicine and biology for diagnosis, monitoring, management, and treatment of diseases.


  • Electroforming-free resistive switching in yttrium manganite thin films by cationic substitution

    by Venkata Rao Rayapati, Danilo Bürger, Nan Du, Rajkumar Patra, Ilona Skorupa, Daniel Blaschke, Hartmut Stöcker, Patrick Matthes, Stefan E. Schulz, Heidemarie Schmidt

    We report unipolar resistive switching in polycrystalline, hexagonal yttrium manganite thin films grown on unpatterned Pt metal coated SiO2/Si substrates with circular Al top electrodes. Electroforming-free or electroforming-based resistive switching is observed, depending on the chemical composition (Y1Mn1O3, Y0.95Mn1.05O3, Y1Mn0.99Ti0.01O3, and Y0.94Mn1.05Ti0.01O3). The number of loading cycles measured at room temperature for samples with Y1Mn1O3 and Y0.95Mn1.05O3 composition is larger than 103. The dominant conduction mechanism of the metal–insulator–metal structures between 295 K and 373 K in the high resistance state is space charge limited conduction and in the low resistance state is ohmic conduction. Activation energies in Ohm's law region in the high resistance state are calculated from the Arrhenius equation and are evaluated to be 0.39 ± 0.01 eV (Y1Mn1O3), 0.43 ± 0.01 eV (Y0.95Mn1.05O3), 0.34 ± 0.01 eV (Y1Mn0.99Ti0.01O3), and 0.38 ± 0.02 eV (Y0.94Mn1.05Ti0.01O3).


  • Open Access

    Tunable large field magnetoconductance of ZnO, ZnMnO, and ZnCoO thin films

    by Sahitya V. Vegesna, Danilo Bürger, Rajkumar Patra, Jan Dellith, Barbara Abendroth, Ilona Skorupa, Oliver G. Schmidt, Heidemarie Schmidt

    Magnetoconductivity of ten ZnO, Zn 1 − x Co x O, and Zn 1 − x Mn x O thin films with nominal concentrations of 2.0 at.% and 0.1 at.% of Co 2 + and Mn 2 + ions, respectively, has been analyzed in the temperature range from 5 K to 200 K in in-plane and out-of-plane magnetic fields up to 6 T. The formation of a highly conducting surface layer can be controlled during thin film deposition, leading to a large variation of the sheet resistance, namely, from 2 × 10 3 Ω / ◻ to 1 × 10 5 Ω / ◻ at room temperature. Depending on the thickness of the highly conducting surface layer, a single two-dimensional (2D), a single three-dimensional (3D), or a two-dimensional and three-dimensional (2D + 3D) parallel conducting model was chosen to analyze the measured magnetoconductivity of the magnetic ZnO thin films with different electron spins ( S = 5 / 2 for Zn 1 − x Mn x O and S = 3 / 2 for Zn 1 − x Co x O) and with different Landé g -factors (isotropic for 3D Zn 1 − x Mn x O and 2D Zn 1 − x Co x O and anisotropic for 2D Zn 1 − x Mn x O and 3D Zn 1 − x Co x O).


  • Microwave Radiation Detection with an Ultrathin Free-Standing Superconducting Niobium Nanohelix

    by Sören Lösch, Alexey Alfonsov, Oleksandr V. Dobrovolskiy, Robert Keil, Vivienne Engemaier, Stefan Baunack, Guodong Li, Oliver G. Schmidt, Danilo Bürger

    We present a superconducting bolometer fabricated by a rolled-up technology which allows one to combine the two-dimensionality (2D) of the superconducting layer with a helical spiral curvature. The bolometer is formed as a free-standing Nb nanohelix acting as an ultrathin transition-edge sensor (TES) and having a negligible thermal contact to the substrate. We demonstrate the functionality of the thinfilm TES by examining its microwave detection performance in comparison with a commercial cryogenic bolometer from QMC Instruments. The nanohelix has been revealed to feature a noise equivalent power (NEP) of about 2 · 10−10 WHz−1/2 at a microwave radiation power of 9 Wm−2 , that is four orders of magnitude smaller than NEP of the QMC sensor at a similar radiation power. Furthermore, the forecast for the nanohelix is a one-to-two orders of magnitude shorter response time as compared to sensors based on commonly used 1 µm thick Si3N4 membranes. The reason is the extremely low heat capacity of the 50 nm thick supporting material and the few contact points between the TES and the substrate. Our findings indicate that microwave radiation detection can be substantially improved by extending 2D superconducting structures into the 3D space.


  • Field-Driven Hopping Transport of Oxygen Vacancies in Memristive Oxide Switches with Interface-Mediated Resistive Switching

    by Nan Du, Niveditha Manjunath, Yuan Li, Stephan Menzel, Eike Linn, Rainer Waser, Tiangui You, Danilo Bürger, Ilona Skorupa, Damian Walczyk, et al.

    We investigate the hopping transport of positively charged mobile oxygen vacancies Vo+ in electroforming-free bipolar memristive BiFeO3 switches by conducting impedance spectroscopy and quasistatic state-test measurements. We demonstrate that BiFeO3 switches with mobile oxygen vacancies (Vo+) and fixed substitutional Ti4+ donors on Fe3+ lattice sites close to the bottom electrode have a rectifying top electrode with an unflexible barrier height and a rectifying and/or nonrectifying bottom electrode with a flexible barrier height. The field-driven hopping transport of the oxygen vacancies determines the reconfiguration of the flexible barrier and the dynamics of the resistive switching. Average activation energies of 0.53 eV for trapping and of 0.31 eV for the release of oxygen vacancies by the Ti4+ donors during application of the SET and RESET excitation pulses are extracted, respectively. The larger activation energy during SET is experimentally verified by impedance spectroscopy measurements and evidences the local enhancement of the electrostatic potential profile at the bottom electrode due to the Ti4+ donors on Fe3+ lattice sites.