YYYukihiro Yonemoto

Yukihiro Yonemoto

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yukihiro Yonemoto has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Pressure changes through a sudden expansion in rectangular microchannels for laminar and turbulent flows

    by Yuki Yamahata, Yukihiro Yonemoto, Akimaro Kawahara

    This study experimentally investigates the relationship between the pressure change (ΔPe) at a sudden expansion and the Reynolds number for liquid flows in rectangular microchannels with different expansion ratios. In the experiments, water and an aqueous glycerol solution with various mass concentrations were used as test liquids, and detailed pressure distributions near the sudden expansion section were measured to determine the ΔPe under laminar to turbulent flow conditions. The experimental results showed that ΔPe increases with Reynolds number; however, the increasing trend is affected by the flow conditions both upstream and downstream of the expansion as well as by the reattachment length of the recirculation region formed downstream of the expansion. The Borda–Carnot equation was found to underestimate ΔPe, particularly in the laminar flow regime. To address this, a prediction model for ΔPe was developed by considering both the velocity distribution and the reattachment length effects. The model parameters were determined by applying the least-squares method, with supporting findings from previous studies for the momentum correction factor, Darcy friction factor, and the reattachment length. The proposed model successfully predicted ΔPe within ±12% on average over a wide Reynolds number range from laminar to turbulent flow regimes. These results demonstrate that the model provides a reliable basis for evaluating expansion losses in microchannels and has potential applicability to the design of microfluidic and microreactor systems.

  • Open Access

    Advances in Multiphase Flow Science and Technology: Second Edition

    by Tomoaki Kunugi, Yukihiro Yonemoto

    Over the past decade, two key technologies—high-speed imaging (including cameras and lighting)

  • Versatile bottom-up assembly of metal-nanoparticle monolayer arrays via suppression of the coffee-ring effect using sandwiched substrates

    by Toru Shimada, Mohammad Kamal Hossain, Kohei Shibamoto, Yukihiro Yonemoto, Tomoaki Kunugi, Masahiro Kitajima


  • Open Access

    Rheological Property Changes in Polyacrylamide Aqueous Solution Flowed Through Microchannel Under Low Reynolds Number and High Shear Rate Conditions

    by Yishuai Li, Yukihiro Yonemoto, Yuki Yamahata, Akimaro Kawahara

    As an important structure of microfluidic devices, microchannels have the advantages of precise flow control and high reaction efficiency. This study investigates experimentally changing the rheological properties of a polyacrylamide (PAM) aqueous solution after flowing through a square microchannel with a hydraulic diameter of 0.5 mm under low Reynolds number and high shear rate conditions. To know the effect of the channel length on the change in viscosity and relaxation time, the length is changed to 100 mm and 200 mm. From the experiment, it is found that both the viscosity and relaxation time of the solution decrease with increasing the shear rate and the microchannel length. Based on the present experimental data, an empirical model is proposed to predict the change ratio of the relaxation time before and after passing through the microchannel, and the calculation with the model has an agreement with the experiment with root-mean-square absolute error of 0.007.


  • Open Access

    Relationship between Onset of Sliding Behavior and Size of Droplet on Inclined Solid Substrate

    by Yukihiro Yonemoto, Yosuke Fujii, Yoshiki Sugino, Tomoaki Kunugi

    Whether a droplet slides or not on inclined solid surface is mainly influenced by a balance between the adhesion force at contact area and the gravitational force exerted on the droplet. Especially as the adhesion force is a key parameter for the determination of the sliding behavior of droplets. The adhesion force is mainly estimated by experimental observation for the sliding motion of the droplet. However, at present it is unknown whether the adhesion force is a constant value regardless of the droplet size or not. In the present study, focused on the onset for sliding of water-ethanol binary mixture droplets on inclined solid surface, experimental investigation on the sliding droplets is performed by considering the droplet volumes ranging from 7 to 600 μL in order to understand the effect of the size of the droplet on the adhesive property. The results are discussed using the existing analytical models. From the results, it is found that the adhesion force increases in the case of large droplet volume, while the force reaches constant value in the case of small droplet volume. This difference is related to the degree of the droplet shape deformation, which leads to a change in the contact angle. Finally, a simple empirical model for the adhesion force including the size effect is proposed.


  • Open Access

    Predicting the splash of a droplet impinging on solid substrates

    by Yukihiro Yonemoto, Kanta Tashiro, Kazuki Shimizu, Tomoaki Kunugi

    The impingement behaviours of droplets towards solid substrates depend on the liquid properties, impingement velocity and solid surface conditions, such as wettability and roughness. However, the prediction regarding whether the droplet splashes after the impingement, is still an open question. Here we show that the splashing can be predicted by the pressure balance of the liquid film appearing beneath the impingement droplet coupled with the modified energy balance equation. Hydrodynamic and hydrostatic pressures are the driving forces for the droplet’s radial spreading, while the capillary pressure at the rim edge and viscous stress oppose the driving forces. Thus, splashing occurs when the driving forces overcome the opposing forces. Moreover, the splashing condition is affected by various surface factors, such as wettability and surface roughness. Our work would pave the way to understand the basic physics for rim or liquid film fragmentation and enabling advances in important for engineering field such as printing, sprays for cooling and pesticide.


  • Open Access

    Experimental Correlation for Splashing Condition of Droplets on Solid Substrates

    by Yukihiro Yonemoto, Kanta Tashiro, Minori Yamashita, Tomoaki Kunugi

    Droplet splashing behaviors of water-ethanol binary mixture liquids on roughened solid surfaces were experimentally observed in order to investigate the effects of surface tension, viscosity, and wettability/surface roughness on the splashing occurrence. The range of the droplet volumes was from 1.7 μL to 32.6 μL. The ranges of the surface tension and the viscosity were from 21.1 mN/m to 71.9 mN/m, and from 1 mPas to 2.91 mPas, respectively. The surface roughness range was from 0.03 μm to 1.25 μm for Ra. The present experimental data were evaluated on the basis of the existing models. Resulting from these experiments, a simple model using the Ohnesorge number evaluated by the capillary length was proposed and the accuracy of the predicted critical values such as the critical Weber and Reynolds numbers were discussed. The result indicated that the liquid properties and the quantification of the surface condition such as surface roughness are important factors for the prediction of the splashing behavior.


  • Open Access

    Pressure Change for Single- and Two-Phase Non-Newtonian Flows through Sudden Contraction in Rectangular Microchannel

    by Masaki Toshimitsu, Yukihiro Yonemoto, Akimaro Kawahara

    The flow characteristics of the single-phase liquid and the gas–liquid two-phase flows including the Newtonian and non-Newtonian liquids were experimentally investigated in a horizontal rectangular micro-channel with a sudden contraction—specifically the pressure change across the contraction. The rectangular cross-sectional dimension has Wu × Hu (width × height) = 0.99 × 0.50 mm2 on the upstream side of the contraction and Wd × Hd = 0.49 × 0.50 mm2 on the downstream side. The resulting contraction ratio, σA (=Wd/Wu), was 0.5. Air was used as the test gas (in the case of the gas–liquid two-phase flow experiment), distilled water and three kinds of aqueous solution, i.e., glycerin 25 wt%, xanthangum 0.1 wt% and polyacrylamide 0.11 wt% were used as the test liquid. The pressure distribution in the flow direction upstream and downstream of the channel was measured. The pressure change and loss at the sudden contraction were determined from the pressure distribution. In addition, the pressure change data were compared with the calculation by several correlations proposed by various researchers as well as a newly developed correlation in this study. From the comparisons, it was found that calculations by the newly developed correlations agreed well with the measured values within the error of 30%.