Jérôme Martin
Research Subjects
Jérôme Martin has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Davy Gérard
Light nanomaterials and Nanotechnologies UMR CNRS 7076 University of Technology of Troyes Troyes France
18 shared publications - Jérôme Plain
Light, nanomaterials, nanotechnologies (L2n) Laboratory CNRS UMR 7076 University of Technology of Troyes 12 rue Marie Curie Troyes, Cedex 10004 France
18 shared publications - Julien Proust
Light, nanomaterials, nanotechnologies (L2n) Laboratory CNRS UMR 7076 University of Technology of Troyes 12 rue Marie Curie Troyes, Cedex 10004 France
13 shared publications - Mathieu Kociak
Université Paris-Saclay, CNRS, Laboratoire de Physique des Solides
5 shared publications - Jean-Louis Bijeon
Université de Technologie de Troyes, France
4 shared publications Thomas Simon
Lumière, nanomatériaux, nanotechnologies (L2n), UMR CNRS 7076
4 shared publications
Latest Publications
- 30 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Etude par épitaxie en phase vapeur aux organométalliques de la croissance sélective de nano-hétéro-structures de matériaux à base de GaN
La nano-structuration de matériaux semiconducteurs à grand gap à base de GaN fait l'objet d'un très grand intérêt de par son potentiel pour l'élaboration de composants optoélectroniques innovants émettant dans la gamme spectrale de l’ultraviolet. Le contrôle de la croissance à l'échelle nanométrique doit être ainsi démontré. L'épitaxie sélective ou SAG (Selective Area Growth) étendue au domaine nanométrique (NSAG pour NanoSAG) est un excellent choix pour l'élaboration de nanostructures de semiconducteur. Cette technique consiste en la croissance localisée du matériau sur un substrat partiellement recouvert d'un masque en diélectrique. La NSAG permet l'élaboration d'hétéro-structures en fort désaccord de maille grâce aux mécanismes singuliers de relaxation des contraintes à l'intérieur des nanostructures qui réduisent considérablement la densité de dislocations créées. La première partie de la thèse porte sur la mise en œuvre de l'épitaxie sélective du GaN sur pseudo-substrat de GaN à l'échelle micrométrique puis nanométrique par la technique d'épitaxie en phase vapeur aux organométalliques. Dans un deuxième temps, la NSAG est utilisée pour l'épitaxie de nanostructures de GaN sur substrats de SiC-6H et pseudo-substrat d'AlN. L'influence des conditions de croissance et des motifs définis dans le masque sur la forme des nanostructures est étudiée par la microscopie électronique à balayage et la microscopie à force atomique. Finallement la microscopie électronique en transmission et la nano-diffraction des rayons X par rayonnement synchrotron sont utilisées pour l'analyse structurale approfondie des nanostructures
- 30 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Etude par épitaxie en phase vapeur aux organométalliques de la croissance sélective de nano-hétéro-structures de matériaux à base de GaN
La nano-structuration de matériaux semiconducteurs à grand gap à base de GaN fait l'objet d'un très grand intérêt de par son potentiel pour l'élaboration de composants optoélectroniques innovants émettant dans la gamme spectrale de l’ultraviolet. Le contrôle de la croissance à l'échelle nanométrique doit être ainsi démontré. L'épitaxie sélective ou SAG (Selective Area Growth) étendue au domaine nanométrique (NSAG pour NanoSAG) est un excellent choix pour l'élaboration de nanostructures de semiconducteur. Cette technique consiste en la croissance localisée du matériau sur un substrat partiellement recouvert d'un masque en diélectrique. La NSAG permet l'élaboration d'hétéro-structures en fort désaccord de maille grâce aux mécanismes singuliers de relaxation des contraintes à l'intérieur des nanostructures qui réduisent considérablement la densité de dislocations créées. La première partie de la thèse porte sur la mise en œuvre de l'épitaxie sélective du GaN sur pseudo-substrat de GaN à l'échelle micrométrique puis nanométrique par la technique d'épitaxie en phase vapeur aux organométalliques. Dans un deuxième temps, la NSAG est utilisée pour l'épitaxie de nanostructures de GaN sur substrats de SiC-6H et pseudo-substrat d'AlN. L'influence des conditions de croissance et des motifs définis dans le masque sur la forme des nanostructures est étudiée par la microscopie électronique à balayage et la microscopie à force atomique. Finallement la microscopie électronique en transmission et la nano-diffraction des rayons X par rayonnement synchrotron sont utilisées pour l'analyse structurale approfondie des nanostructures
- 11 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (24) , 22343-22356
Plasmon-Interband Hybridization and Anomalous Production of Hot Electrons in Aluminum Nanoantennas
Strong coupling typically occurs between two separate objects or between an object and its environment (such as an atom and a cavity). However, it can also occur between two different excitations within the same object, a situation that has been much less studied. In this study, we observe strong coupling between localized surface plasmon resonances and the interband transition in aluminum nanorods, as evidenced by optical spectroscopy and electron energy loss spectroscopy, and corroborated with numerical simulations. Strong coupling is observed between the interband transition and multiple orders of the surface plasmon mode, including dark ones. We also obtain experimental maps of the hybrid modes at the nanoscale. In each case, the associated Rabi energy, which corresponds to the energy splitting between the two polaritonic branches, is obtained. Moreover, a dedicated numerical model was employed to calculate the hot electron generation rate in the nanorods. The calculations demonstrate that efficient generation of hot electrons can be achieved in the near-infrared region when the interband transition is strongly coupled with a plasmon resonance. This high generation rate stems from the hybrid nature of the mode, as its plasmonic component provides a high absorption cross-section, while the interband transition part ensures efficient conversion to hot electrons. Consequently, aluminum nanorods represent an efficient source of hot electrons in the visible and near-infrared regions, with potential applications in local photochemistry, photodetection, and solar energy harvesting.
- 11 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (24) , 22343-22356
Plasmon-Interband Hybridization and Anomalous Production of Hot Electrons in Aluminum Nanoantennas
Strong coupling typically occurs between two separate objects or between an object and its environment (such as an atom and a cavity). However, it can also occur between two different excitations within the same object, a situation that has been much less studied. In this study, we observe strong coupling between localized surface plasmon resonances and the interband transition in aluminum nanorods, as evidenced by optical spectroscopy and electron energy loss spectroscopy, and corroborated with numerical simulations. Strong coupling is observed between the interband transition and multiple orders of the surface plasmon mode, including dark ones. We also obtain experimental maps of the hybrid modes at the nanoscale. In each case, the associated Rabi energy, which corresponds to the energy splitting between the two polaritonic branches, is obtained. Moreover, a dedicated numerical model was employed to calculate the hot electron generation rate in the nanorods. The calculations demonstrate that efficient generation of hot electrons can be achieved in the near-infrared region when the interband transition is strongly coupled with a plasmon resonance. This high generation rate stems from the hybrid nature of the mode, as its plasmonic component provides a high absorption cross-section, while the interband transition part ensures efficient conversion to hot electrons. Consequently, aluminum nanorods represent an efficient source of hot electrons in the visible and near-infrared regions, with potential applications in local photochemistry, photodetection, and solar energy harvesting.
- 3 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (15) , 7541-7549
Aluminum Nanoparticles for Photobleaching Resistance of Quantum Dots in Solution
- 3 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (15) , 7541-7549
Aluminum Nanoparticles for Photobleaching Resistance of Quantum Dots in Solution
- 7 March 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (3) , 880-887
Colloidal Synthesis of Crystalline Aluminum Nanoparticles for UV Plasmonics
- 7 March 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (3) , 880-887
Colloidal Synthesis of Crystalline Aluminum Nanoparticles for UV Plasmonics
- Open Access
- 19 January 2022
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 119 (4)
Aluminum Cayley trees as scalable, broadband, multiresonant optical antennas
Significance: Optical antennas perform the same functions for light that aerials do for radio waves; they can extract energy from a propagating electromagnetic field, and they can convert localized energy into propagating radiation. Here, we use a fractal-like design, the Cayley tree, to create optical antennas. Implementing this simple iterative design with aluminum as the antenna material, we demonstrate optical antennas with broadband operating range from energies corresponding to thermal radiation up to ultraviolet. The spatial distribution of electromagnetic energy inside the antennas is experimentally imaged using electron energy loss spectroscopy, a technique allowing direct imaging and spectroscopy at the nanoscale. Such antennas are interesting for applications including photodetection, nonlinear frequency conversion, and infrared absorption spectroscopy.
- 19 January 2022
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 119 (4)
Open AccessAluminum Cayley trees as scalable, broadband, multiresonant optical antennas
Significance: Optical antennas perform the same functions for light that aerials do for radio waves; they can extract energy from a propagating electromagnetic field, and they can convert localized energy into propagating radiation. Here, we use a fractal-like design, the Cayley tree, to create optical antennas. Implementing this simple iterative design with aluminum as the antenna material, we demonstrate optical antennas with broadband operating range from energies corresponding to thermal radiation up to ultraviolet. The spatial distribution of electromagnetic energy inside the antennas is experimentally imaged using electron energy loss spectroscopy, a technique allowing direct imaging and spectroscopy at the nanoscale. Such antennas are interesting for applications including photodetection, nonlinear frequency conversion, and infrared absorption spectroscopy.
- 19 January 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 131 (3) , 039901
Publisher’s Note: “Band-edge emission enhancement in sputtered ZnO thin films with ultraviolet surface lattice resonances” [J. Appl. Phys. 130, 223103 (2021)]
- 19 January 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 131 (3) , 039901
Publisher’s Note: “Band-edge emission enhancement in sputtered ZnO thin films with ultraviolet surface lattice resonances” [J. Appl. Phys. 130, 223103 (2021)]
- Open Access
Band-edge emission enhancement in sputtered ZnO thin films with ultraviolet surface lattice resonances
Metallic nanostructures acting as optical nanoantennas can significantly enhance the photoluminescence (PL) of nearby emitters. Albeit luminescence enhancement factors of several orders of magnitude have been reported for quantum dots or molecules, in the case of bulk emitters the magnitude of the plasmonic enhancement is strongly hindered by the weak spatial overlap between the active medium and the electromagnetic modes of the nanoantenna. Here, we propose a solid-state ultraviolet emitter based on a thin film of zinc oxide (ZnO) coupled with an array of aluminum (Al) nanoparticles. The Al nanorod array is designed to sustain surface lattice resonances (SLRs) in the near ultraviolet, which are hybrid modes exhibiting a Fano-like lineshape with narrowed linewidth relatively to the non-hybridized plasmonic modes. By changing both the period of the array and the dimensions of the nanorods, the generated SLR is tuned either to the near band-edge (NBE) emission of ZnO or to the excitation wavelength. We experimentally demonstrate that NBE emission can be increased up to a factor of 3 compared to bare ZnO. The underlying PL enhancement mechanisms are experimentally investigated and compared with numerical simulations. We also demonstrate that SLRs are more efficient for the ZnO luminescence enhancement compared to localized surface plasmon resonances.
Open AccessBand-edge emission enhancement in sputtered ZnO thin films with ultraviolet surface lattice resonances
Metallic nanostructures acting as optical nanoantennas can significantly enhance the photoluminescence (PL) of nearby emitters. Albeit luminescence enhancement factors of several orders of magnitude have been reported for quantum dots or molecules, in the case of bulk emitters the magnitude of the plasmonic enhancement is strongly hindered by the weak spatial overlap between the active medium and the electromagnetic modes of the nanoantenna. Here, we propose a solid-state ultraviolet emitter based on a thin film of zinc oxide (ZnO) coupled with an array of aluminum (Al) nanoparticles. The Al nanorod array is designed to sustain surface lattice resonances (SLRs) in the near ultraviolet, which are hybrid modes exhibiting a Fano-like lineshape with narrowed linewidth relatively to the non-hybridized plasmonic modes. By changing both the period of the array and the dimensions of the nanorods, the generated SLR is tuned either to the near band-edge (NBE) emission of ZnO or to the excitation wavelength. We experimentally demonstrate that NBE emission can be increased up to a factor of 3 compared to bare ZnO. The underlying PL enhancement mechanisms are experimentally investigated and compared with numerical simulations. We also demonstrate that SLRs are more efficient for the ZnO luminescence enhancement compared to localized surface plasmon resonances.
- 8 December 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (22) , 223103
Band-edge emission enhancement in sputtered ZnO thin films with ultraviolet surface lattice resonances
Metallic nanostructures acting as optical nanoantennas can significantly enhance the photoluminescence (PL) of nearby emitters. Albeit luminescence enhancement factors of several orders of magnitude have been reported for quantum dots or molecules, in the case of bulk emitters, the magnitude of the plasmonic enhancement is strongly hindered by the weak spatial overlap between the active medium and the electromagnetic modes of the nanoantenna. Here, we propose a solid-state ultraviolet emitter based on a thin film of zinc oxide (ZnO) coupled with an array of aluminum (Al) nanoparticles. The Al nanorod array is designed to sustain surface lattice resonances (SLRs) in the near ultraviolet, which are hybrid modes exhibiting a Fano-like lineshape with narrowed linewidth relatively to the non-hybridized plasmonic modes. By changing both the period of the array and the dimensions of the nanorods, the generated SLR is tuned either to the near band-edge (NBE) emission of ZnO or to the excitation wavelength. We experimentally demonstrate that NBE emission can be increased up to a factor of 3 compared to bare ZnO. The underlying PL enhancement mechanisms are experimentally investigated and compared with numerical simulations. We also demonstrate that SLRs are more efficient for the ZnO luminescence enhancement compared to localized surface plasmon resonances.
- 8 December 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (22) , 223103
Band-edge emission enhancement in sputtered ZnO thin films with ultraviolet surface lattice resonances
Metallic nanostructures acting as optical nanoantennas can significantly enhance the photoluminescence (PL) of nearby emitters. Albeit luminescence enhancement factors of several orders of magnitude have been reported for quantum dots or molecules, in the case of bulk emitters, the magnitude of the plasmonic enhancement is strongly hindered by the weak spatial overlap between the active medium and the electromagnetic modes of the nanoantenna. Here, we propose a solid-state ultraviolet emitter based on a thin film of zinc oxide (ZnO) coupled with an array of aluminum (Al) nanoparticles. The Al nanorod array is designed to sustain surface lattice resonances (SLRs) in the near ultraviolet, which are hybrid modes exhibiting a Fano-like lineshape with narrowed linewidth relatively to the non-hybridized plasmonic modes. By changing both the period of the array and the dimensions of the nanorods, the generated SLR is tuned either to the near band-edge (NBE) emission of ZnO or to the excitation wavelength. We experimentally demonstrate that NBE emission can be increased up to a factor of 3 compared to bare ZnO. The underlying PL enhancement mechanisms are experimentally investigated and compared with numerical simulations. We also demonstrate that SLRs are more efficient for the ZnO luminescence enhancement compared to localized surface plasmon resonances.
- Open Access
- 28 April 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (10) , 14799-14814
Evidence of the retardation effect on the plasmonic resonances of aluminum nanodisks in the symmetric/asymmetric environment
A single metallic nanodisk is the simplest plasmonic nanostructure, but it is robust enough to generate a Fano resonance in the forward and backward scattering spectra by the increment of nanodisk height in the symmetric and asymmetric dielectric environment. Thanks to the phase retardation effect, the non-uniform distribution of electric field along the height of aluminum (Al) nanodisk generates the out-of-plane higher-order modes, which interfere with the dipolar mode and subsequently result in the Fano-lineshape scattering spectra. Meanwhile, the symmetry-breaking effect by the dielectric substrate and the increment of refractive index of the symmetric dielectric environment further accelerate the phase retardation effect and contribute to the appearance of out-of-plane modes. The experimental results on the periodic Al nanodisk arrays with different heights confirm the retardation-induced higher modes in the asymmetric and symmetric environment. The appearance of higher modes and blueshifted main dips in the transmission spectra prove the dominant role of out-of-plane higher modes on the plasmonic resonances of the taller Al nanodisk.
- 28 April 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (10) , 14799-14814
Open AccessEvidence of the retardation effect on the plasmonic resonances of aluminum nanodisks in the symmetric/asymmetric environment
A single metallic nanodisk is the simplest plasmonic nanostructure, but it is robust enough to generate a Fano resonance in the forward and backward scattering spectra by the increment of nanodisk height in the symmetric and asymmetric dielectric environment. Thanks to the phase retardation effect, the non-uniform distribution of electric field along the height of aluminum (Al) nanodisk generates the out-of-plane higher-order modes, which interfere with the dipolar mode and subsequently result in the Fano-lineshape scattering spectra. Meanwhile, the symmetry-breaking effect by the dielectric substrate and the increment of refractive index of the symmetric dielectric environment further accelerate the phase retardation effect and contribute to the appearance of out-of-plane modes. The experimental results on the periodic Al nanodisk arrays with different heights confirm the retardation-induced higher modes in the asymmetric and symmetric environment. The appearance of higher modes and blueshifted main dips in the transmission spectra prove the dominant role of out-of-plane higher modes on the plasmonic resonances of the taller Al nanodisk.
- 7 December 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (3) , 1915-1926
Surface roughness and substrate induced symmetry-breaking: influence on the plasmonic properties of aluminum nanostructure arrays
The top surface roughness of Al nanodisk has significant influences on the substrate-induced out-of-plane quadrupolar mode Q and in-plane dipolar mode D.
- 7 December 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (3) , 1915-1926
Surface roughness and substrate induced symmetry-breaking: influence on the plasmonic properties of aluminum nanostructure arrays
The top surface roughness of Al nanodisk has significant influences on the substrate-induced out-of-plane quadrupolar mode Q and in-plane dipolar mode D.