Davy Gérard
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Davy Gérard has a total of 212 co-authors. Here are the top co-authors by number of shared publications:
- Jérôme Plain
Light, nanomaterials, nanotechnologies (L2n) Laboratory CNRS UMR 7076 University of Technology of Troyes 12 rue Marie Curie Troyes, Cedex 10004 France
26 shared publications - Jérôme Martin
Light
18 shared publications - Julien Proust
Light, nanomaterials, nanotechnologies (L2n) Laboratory CNRS UMR 7076 University of Technology of Troyes 12 rue Marie Curie Troyes, Cedex 10004 France
16 shared publications - Hervé Rigneault
Aix Marseille Univ, CNRS, Centrale Med, Institut Fresnel, Marseille, France
12 shared publications - Jérôme Wenger
Aix Marseille Univ, CNRS, Centrale Med, Institut Fresnel, AMUTech, 13013 Marseille, France
12 shared publications - Nicolas Bonod
Institut Fresnel
10 shared publications
Latest Publications
- Open Access
- 31 August 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (35) , e71709
Acrylate‐Epoxy Interpenetrating Polymer Networks for High‐Resolution 3D Lithography by Two‐Photon Polymerization
Multifunctional acrylate monomers are widely used in two‐photon polymerization (TPP) for fabricating 3D micro‐ and nanostructures. However, their limited mechanical properties, such as stiffness and adhesion, restrict high‐resolution 3D structuring and practical applications in complex environments. Epoxy‐based resins, known for their high Young's modulus, are introduced into TPP to address these limitations, though their cationic polymerization often reduces spatial resolution. In this study, we combine the high spatial resolution of acrylates with the mechanical strength of epoxy resins to form interpenetrating polymer networks (IPNs) via TPP. A photoinitiating system based on photoredox catalysis, including a copper complex, iodonium salt, and N‐vinylcarbazole, mixed with a triacrylate monomer and a cycloaliphatic epoxy resin, triggers both radical and cationic polymerization upon two‐photon excitation with a 780 nm femtosecond laser. The spatial resolution and mechanical properties of the resulting IPN structures are evaluated, focusing on the role of epoxy resin, the Young's modulus, and the deformation issue of the 3D polymerized structures. The results show significant improvements in mechanical performance while maintaining high spatial resolution. The fabricated 1D and 3D polymer structures exhibit feature sizes below 80 nm and periodicities down to 300 nm, demonstrating strong potential for advanced nanofabrication applications.
- 31 August 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (35) , e71709
Open AccessAcrylate‐Epoxy Interpenetrating Polymer Networks for High‐Resolution 3D Lithography by Two‐Photon Polymerization
Multifunctional acrylate monomers are widely used in two‐photon polymerization (TPP) for fabricating 3D micro‐ and nanostructures. However, their limited mechanical properties, such as stiffness and adhesion, restrict high‐resolution 3D structuring and practical applications in complex environments. Epoxy‐based resins, known for their high Young's modulus, are introduced into TPP to address these limitations, though their cationic polymerization often reduces spatial resolution. In this study, we combine the high spatial resolution of acrylates with the mechanical strength of epoxy resins to form interpenetrating polymer networks (IPNs) via TPP. A photoinitiating system based on photoredox catalysis, including a copper complex, iodonium salt, and N‐vinylcarbazole, mixed with a triacrylate monomer and a cycloaliphatic epoxy resin, triggers both radical and cationic polymerization upon two‐photon excitation with a 780 nm femtosecond laser. The spatial resolution and mechanical properties of the resulting IPN structures are evaluated, focusing on the role of epoxy resin, the Young's modulus, and the deformation issue of the 3D polymerized structures. The results show significant improvements in mechanical performance while maintaining high spatial resolution. The fabricated 1D and 3D polymer structures exhibit feature sizes below 80 nm and periodicities down to 300 nm, demonstrating strong potential for advanced nanofabrication applications.
- 31 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (22) , 31972-31984
Ultrafast versus Continuous-Wave Plasmonics: How Heat and Hot Electrons Drive Polymerization
Hot carrier and heat generation in plasmonic nanoparticles are critically important in plasmon-assisted chemistry and catalysis, sensing, and optoelectronic applications. The selective control of these effects plays a key role in determining the efficiency of chemical processes and the performance of associated devices. A major challenge lies in distinguishing and precisely controlling these effects under experimental conditions, particularly since most applications rely on continuous-wave (CW) irradiation, where both phenomena occur simultaneously. In this work, we investigate the polymerization of diazonium salts on gold nanocubes under CW and femtosecond (fs) irradiation as a probe for evaluating the efficiency of hot-electron generation and heat production. Our findings reveal that continuous excitation of the quadrupole plasmonic mode promotes a hot-electron-driven process, owing to the absorptive character of the quadrupole resonance. Conversely, excitation of the dipole mode under CW irradiation results in chaotic polymer growth, driven by lattice heat generation. However, fs excitation of the dipole mode induces polarization-dependent polymerization precisely at plasmonic hot spots. We attribute this phenomenon to the synergistic effect of vibrational heating of adsorbate molecules occurring on the picosecond scale due to energy transfer from hot electrons, which leads to the formation of the first polymer layers on the nanocube corners, followed by a lattice-heating-driven reaction that proceeds more rapidly at the created anchoring sites. These results offer insights into the ultrafast processes occurring in gold nanoparticles upon irradiation and pave the way for designing energetically efficient chemical reactions and optoelectronic devices.
- 31 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (22) , 31972-31984
Ultrafast versus Continuous-Wave Plasmonics: How Heat and Hot Electrons Drive Polymerization
Hot carrier and heat generation in plasmonic nanoparticles are critically important in plasmon-assisted chemistry and catalysis, sensing, and optoelectronic applications. The selective control of these effects plays a key role in determining the efficiency of chemical processes and the performance of associated devices. A major challenge lies in distinguishing and precisely controlling these effects under experimental conditions, particularly since most applications rely on continuous-wave (CW) irradiation, where both phenomena occur simultaneously. In this work, we investigate the polymerization of diazonium salts on gold nanocubes under CW and femtosecond (fs) irradiation as a probe for evaluating the efficiency of hot-electron generation and heat production. Our findings reveal that continuous excitation of the quadrupole plasmonic mode promotes a hot-electron-driven process, owing to the absorptive character of the quadrupole resonance. Conversely, excitation of the dipole mode under CW irradiation results in chaotic polymer growth, driven by lattice heat generation. However, fs excitation of the dipole mode induces polarization-dependent polymerization precisely at plasmonic hot spots. We attribute this phenomenon to the synergistic effect of vibrational heating of adsorbate molecules occurring on the picosecond scale due to energy transfer from hot electrons, which leads to the formation of the first polymer layers on the nanocube corners, followed by a lattice-heating-driven reaction that proceeds more rapidly at the created anchoring sites. These results offer insights into the ultrafast processes occurring in gold nanoparticles upon irradiation and pave the way for designing energetically efficient chemical reactions and optoelectronic devices.
- 14 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (16) , 12372-12385
Beyond Geometrical Symmetry: Revealing Near-Field Optical Chirality on Achiral Gold Nanoparticles under Linear Polarization Excitation
Chirality plays a crucial role in the interactions between light and matter. While the majority of research has focused on the interaction of chiral structures with chiral light, recent studies have demonstrated that achiral plasmonic nanostructures can already exhibit chiral near fields under linearly polarized excitation. Building on this insight, we demonstrate that linearly polarized light alone can generate and control near-field chirality on geometrically achiral, C3v-symmetric gold nanotriangles. We employ plasmon-assisted two-photon polymerization as a tip-free near-field recorder that converts transient near fields into permanent 3D polymer topographies. This approach directly imprints the optical near field into polymer structures, enabling direct readout of its evolution with incident polarization angle and wavelength. Planar (2D) symmetry breaking is quantified through the in-plane chirality factor Vmin, defined from the loss of mirror symmetry of the polymer with respect to the three mirror planes of the nanotriangle and evaluated from both SEM images and FDTD simulations. Near-field dissymmetry maps derived from simulations and AFM topographies further resolve the redistribution of chiral hot spots. By jointly tuning polarization and wavelength, we reveal a controllable transition between achiral and chiral polymer configurations correlated with the modal composition of the plasmonic response (dipolar versus edge-dominated higher-order modes). These results establish a practical route to engineer and permanently record polarization-tunable planar dissymmetry in achiral nanoantennas, with implications for chiral sensing, enantioselective photochemistry, and nanophotonic devices.
- 14 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (16) , 12372-12385
Beyond Geometrical Symmetry: Revealing Near-Field Optical Chirality on Achiral Gold Nanoparticles under Linear Polarization Excitation
Chirality plays a crucial role in the interactions between light and matter. While the majority of research has focused on the interaction of chiral structures with chiral light, recent studies have demonstrated that achiral plasmonic nanostructures can already exhibit chiral near fields under linearly polarized excitation. Building on this insight, we demonstrate that linearly polarized light alone can generate and control near-field chirality on geometrically achiral, C3v-symmetric gold nanotriangles. We employ plasmon-assisted two-photon polymerization as a tip-free near-field recorder that converts transient near fields into permanent 3D polymer topographies. This approach directly imprints the optical near field into polymer structures, enabling direct readout of its evolution with incident polarization angle and wavelength. Planar (2D) symmetry breaking is quantified through the in-plane chirality factor Vmin, defined from the loss of mirror symmetry of the polymer with respect to the three mirror planes of the nanotriangle and evaluated from both SEM images and FDTD simulations. Near-field dissymmetry maps derived from simulations and AFM topographies further resolve the redistribution of chiral hot spots. By jointly tuning polarization and wavelength, we reveal a controllable transition between achiral and chiral polymer configurations correlated with the modal composition of the plasmonic response (dipolar versus edge-dominated higher-order modes). These results establish a practical route to engineer and permanently record polarization-tunable planar dissymmetry in achiral nanoantennas, with implications for chiral sensing, enantioselective photochemistry, and nanophotonic devices.
- 11 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (24) , 22343-22356
Plasmon-Interband Hybridization and Anomalous Production of Hot Electrons in Aluminum Nanoantennas
Strong coupling typically occurs between two separate objects or between an object and its environment (such as an atom and a cavity). However, it can also occur between two different excitations within the same object, a situation that has been much less studied. In this study, we observe strong coupling between localized surface plasmon resonances and the interband transition in aluminum nanorods, as evidenced by optical spectroscopy and electron energy loss spectroscopy, and corroborated with numerical simulations. Strong coupling is observed between the interband transition and multiple orders of the surface plasmon mode, including dark ones. We also obtain experimental maps of the hybrid modes at the nanoscale. In each case, the associated Rabi energy, which corresponds to the energy splitting between the two polaritonic branches, is obtained. Moreover, a dedicated numerical model was employed to calculate the hot electron generation rate in the nanorods. The calculations demonstrate that efficient generation of hot electrons can be achieved in the near-infrared region when the interband transition is strongly coupled with a plasmon resonance. This high generation rate stems from the hybrid nature of the mode, as its plasmonic component provides a high absorption cross-section, while the interband transition part ensures efficient conversion to hot electrons. Consequently, aluminum nanorods represent an efficient source of hot electrons in the visible and near-infrared regions, with potential applications in local photochemistry, photodetection, and solar energy harvesting.
- 11 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (24) , 22343-22356
Plasmon-Interband Hybridization and Anomalous Production of Hot Electrons in Aluminum Nanoantennas
Strong coupling typically occurs between two separate objects or between an object and its environment (such as an atom and a cavity). However, it can also occur between two different excitations within the same object, a situation that has been much less studied. In this study, we observe strong coupling between localized surface plasmon resonances and the interband transition in aluminum nanorods, as evidenced by optical spectroscopy and electron energy loss spectroscopy, and corroborated with numerical simulations. Strong coupling is observed between the interband transition and multiple orders of the surface plasmon mode, including dark ones. We also obtain experimental maps of the hybrid modes at the nanoscale. In each case, the associated Rabi energy, which corresponds to the energy splitting between the two polaritonic branches, is obtained. Moreover, a dedicated numerical model was employed to calculate the hot electron generation rate in the nanorods. The calculations demonstrate that efficient generation of hot electrons can be achieved in the near-infrared region when the interband transition is strongly coupled with a plasmon resonance. This high generation rate stems from the hybrid nature of the mode, as its plasmonic component provides a high absorption cross-section, while the interband transition part ensures efficient conversion to hot electrons. Consequently, aluminum nanorods represent an efficient source of hot electrons in the visible and near-infrared regions, with potential applications in local photochemistry, photodetection, and solar energy harvesting.
- 3 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (15) , 7541-7549
Aluminum Nanoparticles for Photobleaching Resistance of Quantum Dots in Solution
- 3 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (15) , 7541-7549
Aluminum Nanoparticles for Photobleaching Resistance of Quantum Dots in Solution
- Open Access
- 8 November 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (48) , 22411-22422
pH controlled synthesis of end to end linked Au nanorod dimer in an aqueous solution for plasmon enhanced spectroscopic applications
The pH sensitivity of DTT is used to prepare the Au NR dimer with a gap distance of ≤1 nm. FDTD simulations show an intense electromagnetic hotspot in the gap of the NR dimer, 11 fold higher than the NR monomer and 80 fold higher than without NRs.
- 8 November 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (48) , 22411-22422
Open AccesspH controlled synthesis of end to end linked Au nanorod dimer in an aqueous solution for plasmon enhanced spectroscopic applications
The pH sensitivity of DTT is used to prepare the Au NR dimer with a gap distance of ≤1 nm. FDTD simulations show an intense electromagnetic hotspot in the gap of the NR dimer, 11 fold higher than the NR monomer and 80 fold higher than without NRs.
- 10 December 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (24) , 25656-25666
Decoding Polarization in a Single Achiral Gold Nanostructure from Emitted Far-Field Radiation
The emergence of optical chirality in the light emitted from plasmonic nanostructures is commonly associated with their geometrical chirality. Although it has been demonstrated that even achiral structures can exhibit chiral near-fields, the existence of chiroptical far-field responses of such structures is widely neglected. In this paper, we present a detailed analysis of the polarization state in a single planar achiral plasmonic nanostructure that sustains more than one prominent plasmon mode. In consideration of the relative phase, the superposition of the fields associated with these modes determines the polarization state of the emitted light in the far-field. Supported by simulations of the surface charge distribution of the particle, we show that the polarization state of the emitted light is already determined in the near-field. The chiroptical far-field responses are analyzed by polarized single-particle dark-field scattering spectroscopy. We introduce an analytical model that enables us to obtain the polarization information from the spectra of structures with dipolar resonances taken under unpolarized illumination. The same principle is confirmed in polarimetric spectroscopy measurements on rhomboids with systematically varied angles, therefore, introducing increasing values of geometrical chirality to the structures. The agreement between the calculation and measurement demonstrates the general validity of our model for both chiral and achiral structures.
- 10 December 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (24) , 25656-25666
Decoding Polarization in a Single Achiral Gold Nanostructure from Emitted Far-Field Radiation
The emergence of optical chirality in the light emitted from plasmonic nanostructures is commonly associated with their geometrical chirality. Although it has been demonstrated that even achiral structures can exhibit chiral near-fields, the existence of chiroptical far-field responses of such structures is widely neglected. In this paper, we present a detailed analysis of the polarization state in a single planar achiral plasmonic nanostructure that sustains more than one prominent plasmon mode. In consideration of the relative phase, the superposition of the fields associated with these modes determines the polarization state of the emitted light in the far-field. Supported by simulations of the surface charge distribution of the particle, we show that the polarization state of the emitted light is already determined in the near-field. The chiroptical far-field responses are analyzed by polarized single-particle dark-field scattering spectroscopy. We introduce an analytical model that enables us to obtain the polarization information from the spectra of structures with dipolar resonances taken under unpolarized illumination. The same principle is confirmed in polarimetric spectroscopy measurements on rhomboids with systematically varied angles, therefore, introducing increasing values of geometrical chirality to the structures. The agreement between the calculation and measurement demonstrates the general validity of our model for both chiral and achiral structures.
- 4 May 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 40 (6) , 1420-1426
Photochromic engineering of radiative decay rate in plasmon–emitter coupling
The development of advanced plasmonic applications is centered on the achievement of active devices. Active plasmonic nanostructures exhibiting tunable resonances have the potential to provide smart materials with a wide range of applications in optoelectronics, including sensing and logic operations. Here, we use finite-difference time-domain simulations to compare the optical properties of nanocones and nanocylinders embedded in two different states of a photochromic medium, first considering a plane wave illumination and then a point dipole one. We show that the photochromic transition induces strong coupling behavior for both illuminations, and it allows a nanocone to effectively enhance one emitter’s emission at one wavelength and quench another emitter at a different wavelength.
- 4 May 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 40 (6) , 1420-1426
Photochromic engineering of radiative decay rate in plasmon–emitter coupling
The development of advanced plasmonic applications is centered on the achievement of active devices. Active plasmonic nanostructures exhibiting tunable resonances have the potential to provide smart materials with a wide range of applications in optoelectronics, including sensing and logic operations. Here, we use finite-difference time-domain simulations to compare the optical properties of nanocones and nanocylinders embedded in two different states of a photochromic medium, first considering a plane wave illumination and then a point dipole one. We show that the photochromic transition induces strong coupling behavior for both illuminations, and it allows a nanocone to effectively enhance one emitter’s emission at one wavelength and quench another emitter at a different wavelength.
- 9 March 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (9)
Photochemical Imaging of Near‐Field and Dissymmetry Factor in Chiral Nanostructures
Chiral nanostructures interact differently with right‐ or left‐handed circularly polarized light. Due to the lack of experimental approaches able to unveil the optical near‐field around chiral nanostructures, their optical characterization generally relies either on far‐field techniques or on numerical simulations. Here, a subwavelength imaging approach based on the interaction between the enhanced optical near‐field around chiral nanoparticles and an azobenzene molecular probe is reported. Under the action of light, the azobenzene molecules undergo isomerization cycles resulting in a measurable displacement of matter. The resulting imprint of the optical near‐field can then be imaged using atomic force microscopy. Using two shifted gold nanorods separated by a nanogap as a canonical chiral structure, a dissymmetry in the near‐field of the chiral structures under left and right circular polarizations is experimentally evidenced. Notably, it is observed that the gap mode is excited only when the handedness of the exciting light matches the handedness of the nanostructure, evidencing a chiral hot spot inside the gap. Moreover, it is shown that it is possible to experimentally map the near‐field dissymmetry factor, a quantity related to the local circular dichroism of the near‐field intensity.
- 9 March 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (9)
Photochemical Imaging of Near‐Field and Dissymmetry Factor in Chiral Nanostructures
Chiral nanostructures interact differently with right‐ or left‐handed circularly polarized light. Due to the lack of experimental approaches able to unveil the optical near‐field around chiral nanostructures, their optical characterization generally relies either on far‐field techniques or on numerical simulations. Here, a subwavelength imaging approach based on the interaction between the enhanced optical near‐field around chiral nanoparticles and an azobenzene molecular probe is reported. Under the action of light, the azobenzene molecules undergo isomerization cycles resulting in a measurable displacement of matter. The resulting imprint of the optical near‐field can then be imaged using atomic force microscopy. Using two shifted gold nanorods separated by a nanogap as a canonical chiral structure, a dissymmetry in the near‐field of the chiral structures under left and right circular polarizations is experimentally evidenced. Notably, it is observed that the gap mode is excited only when the handedness of the exciting light matches the handedness of the nanostructure, evidencing a chiral hot spot inside the gap. Moreover, it is shown that it is possible to experimentally map the near‐field dissymmetry factor, a quantity related to the local circular dichroism of the near‐field intensity.
- 17 August 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (18) , 31913-31924
Electrically switchable structural colors based on liquid-crystal-overlaid aluminum anisotropic nanoaperture arrays
Actively tunable or reconfigurable structural colors are highly promising in future development for high resolution imaging and displaying applications. To this end, we demonstrate switchable structural colors covering the entire visible range by integrating aluminum nanoaperture arrays with nematic liquid crystals. The geometrically anisotropic design of the nanoapertures provides strong polarization-dependent coloration. By overlaying a nematic liquid crystal layer, we further demonstrate switchable ability of the structural colors by either changing the polarization of the incident light or applying an external voltage. The switchable structural colors have a fast response time of 28 ms at a driving voltage of 6.5 V. Furthermore, colorful patterns are demonstrated by coding the colors with various dimensions of nanoaperture arrays with dual switching modes. Our proposed technique in this work provides a dual-mode switchable structural colors, which is highly promising for polarimetric displays, imaging sensors, and visual cryptography.
- 17 August 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (18) , 31913-31924
Electrically switchable structural colors based on liquid-crystal-overlaid aluminum anisotropic nanoaperture arrays
Actively tunable or reconfigurable structural colors are highly promising in future development for high resolution imaging and displaying applications. To this end, we demonstrate switchable structural colors covering the entire visible range by integrating aluminum nanoaperture arrays with nematic liquid crystals. The geometrically anisotropic design of the nanoapertures provides strong polarization-dependent coloration. By overlaying a nematic liquid crystal layer, we further demonstrate switchable ability of the structural colors by either changing the polarization of the incident light or applying an external voltage. The switchable structural colors have a fast response time of 28 ms at a driving voltage of 6.5 V. Furthermore, colorful patterns are demonstrated by coding the colors with various dimensions of nanoaperture arrays with dual switching modes. Our proposed technique in this work provides a dual-mode switchable structural colors, which is highly promising for polarimetric displays, imaging sensors, and visual cryptography.