Zhenbang Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhenbang Liu has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Hua Huang
Institute of Applied Electronics, China Academy of Engineering Physics
14 shared publications- Shifeng Li
Institute of Applied Electronics, China Academy of Engineering Physics
13 shared publications - Limin Sun
School of Information Engineering, Mianyang Teachers College, Mianyang, China
7 shared publications Xiao Jin
Science and Technology on High Power Microwave Laboratory, Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang, China
7 shared publicationsDongwenlong Wu
Institute of Applied Electronics, China Academy of Engineering Physics
6 shared publicationsKe He
National Key Laboratory of Science and Technology on Advanced Laser and High Power Microwave, Institute of Applied Electronics, CAEP, Mianyang, China
6 shared publications
Latest Publications
- 1 August 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (8) , 5209-5215
Study on Beam Transmission and Device Efficiency of X-Band Coaxial Multibeam Relativistic Klystron Amplifier
- 1 August 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (8) , 5209-5215
Study on Beam Transmission and Device Efficiency of X-Band Coaxial Multibeam Relativistic Klystron Amplifier
- Open Access
- 9 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 94369-94376
Modular Periodic Permanent Magnet for S-Band Coaxial Multi-Beam Relativistic Klystron Amplifier
To address the large volume and heavy weight of conventional permanent magnet (PM) focusing configuration in coaxial multi beam relativistic klystron amplifier (CMB-RKA), a compact modular periodic permanent magnet (MPPM) focusing onfiguration is proposed in this paper. Based on the electron gyromotion theory and the quasi Brillouin flow beam model established in this work, the magnetic field parameters of theMPPMsystem required for relativistic electron beam transport are determined. Meanwhile, a diode structure with magnetic prefocusing is employed to provide a matched relativistic electron beam. The proposed MPPM system consists of six magnetic periods, with a total weight of only 91 kg. Its performance is further verified by particle in cell simulation. The results show that, under a beam voltage of 525 kV and a total beam current of 4.62 kA, a beam transmission efficiency of 95% is achieved at the collector entrance, while the CMB-RKA delivers an output microwave power of 0.78 GW with an efficiency of 31%. These results demonstrate that the proposed compact MPPM configuration can effectively focus coaxial pencil electron beams and provides a promising approach for the miniaturization and lightweight design of high power microwave systems.
- 9 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 94369-94376
Open AccessModular Periodic Permanent Magnet for S-Band Coaxial Multi-Beam Relativistic Klystron Amplifier
To address the large volume and heavy weight of conventional permanent magnet (PM) focusing configuration in coaxial multi beam relativistic klystron amplifier (CMB-RKA), a compact modular periodic permanent magnet (MPPM) focusing onfiguration is proposed in this paper. Based on the electron gyromotion theory and the quasi Brillouin flow beam model established in this work, the magnetic field parameters of theMPPMsystem required for relativistic electron beam transport are determined. Meanwhile, a diode structure with magnetic prefocusing is employed to provide a matched relativistic electron beam. The proposed MPPM system consists of six magnetic periods, with a total weight of only 91 kg. Its performance is further verified by particle in cell simulation. The results show that, under a beam voltage of 525 kV and a total beam current of 4.62 kA, a beam transmission efficiency of 95% is achieved at the collector entrance, while the CMB-RKA delivers an output microwave power of 0.78 GW with an efficiency of 31%. These results demonstrate that the proposed compact MPPM configuration can effectively focus coaxial pencil electron beams and provides a promising approach for the miniaturization and lightweight design of high power microwave systems.
- Open Access
- 24 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 47485-47495
Data-Driven Sensitivity Analysis and Hybrid Multi-Objective Optimization for Ultra-High Performance Klystron
This study presents a data-driven framework integrating sensitivity analysis with hybrid multi-objective optimization to improve both the physical performance and design efficiency of high-performance klystrons. A random forest–based Normalized Output Variation (NOV) method is developed to quantitatively assess the influence of design parameters, and an adaptive parameter-range adjustment strategy is employed to enable effective variable screening and range contraction, significantly enhancing computational efficiency. The framework incorporates a hybrid multi-objective optimizer with periodic elite migration, which balances population diversity and global exploration by combining NSGA-II’s rapid convergence with OMOPSO’s local search precision, achieving 71.7% 1D design efficiency.Arepresentative design from the hybrid Pareto front is selected for 3D validation and refinement using CHIPIC particle-in-cell simulations, achieving 61% efficiency at an interaction length of 5.3 operating wavelengths. This represents the highest simulated efficiency and most compact structure among recent S- to Ka-band relativistic klystron amplifiers (RKA). The proposed framework demonstrates a robust and efficient data-driven paradigm not only for klystron design but also for the optimization of other complex vacuum electronic devices and microwave systems.
- 24 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 47485-47495
Open AccessData-Driven Sensitivity Analysis and Hybrid Multi-Objective Optimization for Ultra-High Performance Klystron
This study presents a data-driven framework integrating sensitivity analysis with hybrid multi-objective optimization to improve both the physical performance and design efficiency of high-performance klystrons. A random forest–based Normalized Output Variation (NOV) method is developed to quantitatively assess the influence of design parameters, and an adaptive parameter-range adjustment strategy is employed to enable effective variable screening and range contraction, significantly enhancing computational efficiency. The framework incorporates a hybrid multi-objective optimizer with periodic elite migration, which balances population diversity and global exploration by combining NSGA-II’s rapid convergence with OMOPSO’s local search precision, achieving 71.7% 1D design efficiency.Arepresentative design from the hybrid Pareto front is selected for 3D validation and refinement using CHIPIC particle-in-cell simulations, achieving 61% efficiency at an interaction length of 5.3 operating wavelengths. This represents the highest simulated efficiency and most compact structure among recent S- to Ka-band relativistic klystron amplifiers (RKA). The proposed framework demonstrates a robust and efficient data-driven paradigm not only for klystron design but also for the optimization of other complex vacuum electronic devices and microwave systems.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 61402-61413
Physics-Constrained Conditional Inverse Design of Relativistic Klystrons via a Split-Merge Tandem Framework
The development of Relativistic Klystron Amplifiers (RKAs) has long been hindered by prolonged design cycles, primarily due to the strong nonlinearity of beam-wave interactions, the high dimensionality of the parameter space, and the prohibitive computational cost of Particle-in-Cell (PIC) simulations. To address these challenges, this paper proposes a conditional inverse design framework that integrates surrogate modeling with physical constraints for the efficient generation of RKA structural parameters. First, using a PIC simulation model of an X-band single-beam seven-cavity RKA as a physical baseline, equivalent one-dimensional (1D) parameters of the resonant cavities are extracted and combined with electron beam characteristics to construct a 33-dimensional design parameter space with explicit physical constraints. Subsequently, a fast 1D large-signal simulation software KlyH is employed to generate approximately $1.3 \times 10^{5}$ samples. These samples are used to train a forward surrogate model, enabling accurate characterization of the nonlinear mapping between design parameters and device efficiency. To satisfy the hard constraints prevalent in engineering design, a Split-Merge tandem neural network architecture is introduced. By directly embedding user-defined constraint parameters into the design vector, this architecture facilitates conditional inverse generation while guaranteeing strict satisfaction of the constraints at the network structure level. Comparative validation demonstrates that the generated designs achieve an average error of 3.7% against the KlyH baseline. Furthermore, when verifying these designs in PIC simulations, the results show a maximum deviation of 8.8% compared to the KlyH. The proposed framework significantly reduces the computational burden of inverse design while maintaining essential physical consistency, offering a practical solution for the rapid optimization and engineering design of RKAs.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 61402-61413
Open AccessPhysics-Constrained Conditional Inverse Design of Relativistic Klystrons via a Split-Merge Tandem Framework
The development of Relativistic Klystron Amplifiers (RKAs) has long been hindered by prolonged design cycles, primarily due to the strong nonlinearity of beam-wave interactions, the high dimensionality of the parameter space, and the prohibitive computational cost of Particle-in-Cell (PIC) simulations. To address these challenges, this paper proposes a conditional inverse design framework that integrates surrogate modeling with physical constraints for the efficient generation of RKA structural parameters. First, using a PIC simulation model of an X-band single-beam seven-cavity RKA as a physical baseline, equivalent one-dimensional (1D) parameters of the resonant cavities are extracted and combined with electron beam characteristics to construct a 33-dimensional design parameter space with explicit physical constraints. Subsequently, a fast 1D large-signal simulation software KlyH is employed to generate approximately $1.3 \times 10^{5}$ samples. These samples are used to train a forward surrogate model, enabling accurate characterization of the nonlinear mapping between design parameters and device efficiency. To satisfy the hard constraints prevalent in engineering design, a Split-Merge tandem neural network architecture is introduced. By directly embedding user-defined constraint parameters into the design vector, this architecture facilitates conditional inverse generation while guaranteeing strict satisfaction of the constraints at the network structure level. Comparative validation demonstrates that the generated designs achieve an average error of 3.7% against the KlyH baseline. Furthermore, when verifying these designs in PIC simulations, the results show a maximum deviation of 8.8% compared to the KlyH. The proposed framework significantly reduces the computational burden of inverse design while maintaining essential physical consistency, offering a practical solution for the rapid optimization and engineering design of RKAs.
- 2 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 7055-7059
A Compact Ku-Band Multibeam Relativistic Klystron Amplifier Packaged With Permanent Magnets
A compact Ku-band multibeam relativistic klystron amplifier (MBRKA) packaged with permanent magnets is proposed for the sake of producing repetitive high-power microwave (HPM) with good phase stability. A three-gap output cavity is designed. HPM is output from the internal channel, and the electron beams are bombarded to the external water-cooled collector. Then, the radial size of the output cavity is reduced, thereby reducing the volume and weight of the permanent magnet. At the same time, the output structure can reduce the intensity of the gap electric field to avoid RF breakdown, and on the other hand, the outer collector structure increases the cross section of the electron beams bombardment, reduces the generation of plasma, and improves the stability of the device’s repetition frequency operation. Besides, the improved diode structure with an inner anode is designed to realize the stable transmission of intense relativistic multiple electron beams (IRMEBs). The typical experimental results show that the Ku-band HPM with a power of 570 MW is generated, corresponding to an efficiency of 36% and a gain of 48 dB, when the guiding magnetic field is about 0.45 T produced by the permanent magnets. The result of continuous operation for 200 s at a repetition rate of 30 Hz indicates that the MBRKA has the capability of operating at a high repetition rate with good phase stability.
- 2 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 7055-7059
A Compact Ku-Band Multibeam Relativistic Klystron Amplifier Packaged With Permanent Magnets
A compact Ku-band multibeam relativistic klystron amplifier (MBRKA) packaged with permanent magnets is proposed for the sake of producing repetitive high-power microwave (HPM) with good phase stability. A three-gap output cavity is designed. HPM is output from the internal channel, and the electron beams are bombarded to the external water-cooled collector. Then, the radial size of the output cavity is reduced, thereby reducing the volume and weight of the permanent magnet. At the same time, the output structure can reduce the intensity of the gap electric field to avoid RF breakdown, and on the other hand, the outer collector structure increases the cross section of the electron beams bombardment, reduces the generation of plasma, and improves the stability of the device’s repetition frequency operation. Besides, the improved diode structure with an inner anode is designed to realize the stable transmission of intense relativistic multiple electron beams (IRMEBs). The typical experimental results show that the Ku-band HPM with a power of 570 MW is generated, corresponding to an efficiency of 36% and a gain of 48 dB, when the guiding magnetic field is about 0.45 T produced by the permanent magnets. The result of continuous operation for 200 s at a repetition rate of 30 Hz indicates that the MBRKA has the capability of operating at a high repetition rate with good phase stability.
- Open Access
- 30 May 2025
- Published by MDPI AG in Electronics
- Vol. 14 (11) , 2223
KlyH: 1D Disk Model-Based Large-Signal Simulation Software for Klystrons
This paper presents KlyH, a new 1D (one-dimensional) large-signal simulation software for klystrons, designed to deliver efficient and accurate simulation and optimization tools. KlyH integrates a Fortran-based dynamic link library (DLL) as its computational core, which employs high-performance numerical algorithms to rapidly compute critical parameters such as efficiency, gain, and bandwidth. Compared with traditional 1D simulation tools, which often lack open interfaces and extensibility, KlyH is built with a modular and open architecture that supports seamless integration with advanced optimization and intelligent design algorithms. KlyH incorporates multi-objective optimization frameworks, notably the Non-Dominated Sorting Genetic Algorithm II (NSGA-II) and Optimized Multi-Objective Particle Swarm Optimization (OMOPSO), enabling automated parameter tuning for efficiency maximization and interaction length optimization. Its bandwidth-of-klystron-analysis module predicts gain and output power across operational bandwidths, with optimization algorithms further enhancing bandwidth performance. A Java-based graphical user interface (GUI) provides an intuitive workflow for parameter configuration and real-time visualization of simulation results. The open architecture also lays the foundation for future integration of artificial intelligence algorithms, promoting intelligent and automated klystron design workflows. The accuracy of KlyH and its potential for parameter optimization are confirmed by a case study on an X-band relativistic klystron amplifier. Discrepancies observed between 1D simulations and 3D PIC (three-dimensional particle-in-cell) simulation results are analyzed to identify model limitations, providing critical insights for advancing high-performance klystron designs.
- 30 May 2025
- Published by MDPI AG in Electronics
- Vol. 14 (11) , 2223
Open AccessKlyH: 1D Disk Model-Based Large-Signal Simulation Software for Klystrons
This paper presents KlyH, a new 1D (one-dimensional) large-signal simulation software for klystrons, designed to deliver efficient and accurate simulation and optimization tools. KlyH integrates a Fortran-based dynamic link library (DLL) as its computational core, which employs high-performance numerical algorithms to rapidly compute critical parameters such as efficiency, gain, and bandwidth. Compared with traditional 1D simulation tools, which often lack open interfaces and extensibility, KlyH is built with a modular and open architecture that supports seamless integration with advanced optimization and intelligent design algorithms. KlyH incorporates multi-objective optimization frameworks, notably the Non-Dominated Sorting Genetic Algorithm II (NSGA-II) and Optimized Multi-Objective Particle Swarm Optimization (OMOPSO), enabling automated parameter tuning for efficiency maximization and interaction length optimization. Its bandwidth-of-klystron-analysis module predicts gain and output power across operational bandwidths, with optimization algorithms further enhancing bandwidth performance. A Java-based graphical user interface (GUI) provides an intuitive workflow for parameter configuration and real-time visualization of simulation results. The open architecture also lays the foundation for future integration of artificial intelligence algorithms, promoting intelligent and automated klystron design workflows. The accuracy of KlyH and its potential for parameter optimization are confirmed by a case study on an X-band relativistic klystron amplifier. Discrepancies observed between 1D simulations and 3D PIC (three-dimensional particle-in-cell) simulation results are analyzed to identify model limitations, providing critical insights for advancing high-performance klystron designs.
- 1 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (2) , 1325-1328
A Compact High-Gain Ku-Band Multibeam Relativistic Klystron Amplifier With Low Guiding Magnetic Field
In this brief, a compact high-gain Ku-band multibeam relativistic klystron amplifier (MBRKA) is proposed to achieve high power and high efficiency with low-guiding magnetic field. A special anode structure with an inner conductor is designed to realize stable transmission of the intense relativistic multiple electron beams (IRMEBs) with low-guiding magnetic field. The compactness is realized by adopting the three cascaded double gap bunching cavities while maintaining high gain. The Ku-band MBRKA is designed to be an over mode structure to increase the power capacity. Combined with the device structure, an internal and external combined permanent magnet is designed, which can realize light permanent magnet packaging for the over mode MBRKA. The experiments were performed with a low magnetic field of 0.43 T. The output power, pulsewidth, and gain of the device were experimentally found as 630 MW, 80 ns, and 50 dB, respectively. Furthermore, the axial length between the input and output cavities is only 5.6 wavelengths.
- 1 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (2) , 1325-1328
A Compact High-Gain Ku-Band Multibeam Relativistic Klystron Amplifier With Low Guiding Magnetic Field
In this brief, a compact high-gain Ku-band multibeam relativistic klystron amplifier (MBRKA) is proposed to achieve high power and high efficiency with low-guiding magnetic field. A special anode structure with an inner conductor is designed to realize stable transmission of the intense relativistic multiple electron beams (IRMEBs) with low-guiding magnetic field. The compactness is realized by adopting the three cascaded double gap bunching cavities while maintaining high gain. The Ku-band MBRKA is designed to be an over mode structure to increase the power capacity. Combined with the device structure, an internal and external combined permanent magnet is designed, which can realize light permanent magnet packaging for the over mode MBRKA. The experiments were performed with a low magnetic field of 0.43 T. The output power, pulsewidth, and gain of the device were experimentally found as 630 MW, 80 ns, and 50 dB, respectively. Furthermore, the axial length between the input and output cavities is only 5.6 wavelengths.
- 26 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (12) , 6571-6578
Compact, Stable, Repetitive GW-Level S -Band Multibeam Relativistic Klystron Amplifier Operating Over a Longer Period in a Lower Magnetic Field
The design, based on theory, simulation, and cold as well as hot tests, is proposed for a compact GW-level multibeam relativistic klystron amplifier (MB-RKA) with a low beam confining magnetic field in the $\textit{S}$ -band, which can operate repeatedly and stably up to 8 min. For this purpose, graphene cathodes and a microchannel water cooling system were used. For the sake of compactness, the input section of the MB-RKA was taken as a cylindrical conformal sectorial waveguide and the output section as an inner cylindrical coaxial waveguide. The experiments were performed with a magnetic field of 0.39 T. In the single-pulse operation, the output power, pulsewidth, gain, and efficiency of the device were experimentally found as 1.047 GW, 68 ns, 56 dB, and 37% respectively, when the beam voltage, beam current, and injected power were taken as 530 kV, 5.30 kA, and 2.40 kW, respectively. In the multipulse operation at a pulse repetition rate of 20 Hz, over a period of 8 min, the MB-RKA experimentally delivered the mean output power of 0.889 GW of 42-ns pulsewidth, taking the mean beam voltage and current as 551 kV and 5.14 kA, respectively.
- 26 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (12) , 6571-6578
Compact, Stable, Repetitive GW-Level S -Band Multibeam Relativistic Klystron Amplifier Operating Over a Longer Period in a Lower Magnetic Field
The design, based on theory, simulation, and cold as well as hot tests, is proposed for a compact GW-level multibeam relativistic klystron amplifier (MB-RKA) with a low beam confining magnetic field in the $\textit{S}$ -band, which can operate repeatedly and stably up to 8 min. For this purpose, graphene cathodes and a microchannel water cooling system were used. For the sake of compactness, the input section of the MB-RKA was taken as a cylindrical conformal sectorial waveguide and the output section as an inner cylindrical coaxial waveguide. The experiments were performed with a magnetic field of 0.39 T. In the single-pulse operation, the output power, pulsewidth, gain, and efficiency of the device were experimentally found as 1.047 GW, 68 ns, 56 dB, and 37% respectively, when the beam voltage, beam current, and injected power were taken as 530 kV, 5.30 kA, and 2.40 kW, respectively. In the multipulse operation at a pulse repetition rate of 20 Hz, over a period of 8 min, the MB-RKA experimentally delivered the mean output power of 0.889 GW of 42-ns pulsewidth, taking the mean beam voltage and current as 551 kV and 5.14 kA, respectively.
- 21 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (12) , 2177-2179
Stable Operation of a Repetitively Pulsed X-Band Gigawatt Long Pulse Coaxial Multi-Beam Relativistic Klystron Amplifier
In this paper, the stability of an X band gigawatt coaxial multi-beam relativistic klystron amplifier (CMB-RKA) operating in repetitively pulsed mode was investigated by the particle-in-cell (PIC) simulation and experiments. A four-gap extended-interaction output cavity was optimized to avoid electrons reflection. And a water-cooled electron beams collector which was integrated with the output mode converter was designed to reduce the plasma and secondary electrons. The explosive emission conditions were improved by using the C–C composite material cathode, and the titanium beam-wave interaction structure was used to replace the stainless steel structure. All these factors brought greater stability of the CMB-RKA. In the experiment, the X-band CMB-RKA can operate at a 20 pps repetition rate with duration of 120 seconds, when the output power was about 0.95 GW with pulse width of 160 ns. The long-term stability of the X-band CMB-RKA performances during 10 5 pulses was realized, which is driven by a long pulse compact accelerator.
- 21 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (12) , 2177-2179
Stable Operation of a Repetitively Pulsed X-Band Gigawatt Long Pulse Coaxial Multi-Beam Relativistic Klystron Amplifier
In this paper, the stability of an X band gigawatt coaxial multi-beam relativistic klystron amplifier (CMB-RKA) operating in repetitively pulsed mode was investigated by the particle-in-cell (PIC) simulation and experiments. A four-gap extended-interaction output cavity was optimized to avoid electrons reflection. And a water-cooled electron beams collector which was integrated with the output mode converter was designed to reduce the plasma and secondary electrons. The explosive emission conditions were improved by using the C–C composite material cathode, and the titanium beam-wave interaction structure was used to replace the stainless steel structure. All these factors brought greater stability of the CMB-RKA. In the experiment, the X-band CMB-RKA can operate at a 20 pps repetition rate with duration of 120 seconds, when the output power was about 0.95 GW with pulse width of 160 ns. The long-term stability of the X-band CMB-RKA performances during 10 5 pulses was realized, which is driven by a long pulse compact accelerator.
- 22 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (10) , 1760-1763
Short-Length, High-Efficiency S-Band Coaxial Cavity Relativistic Multibeam Klystron Amplifier for Potential High Power Microwave Application
This letter reports the successful development of an S-band short-length, high-efficiency, coaxial cavity multi-beam relativistic klystron amplifier (CCMB-RKA). The simulation in one-dimensional genetic algorithm, capable of giving high-efficiency parameters, predicted 67% efficiency of CCMB-RKA, taking the interaction length as 600 mm, beam voltage as 420 kV, and beam current as 230 A. However, for accurate results, the CCMB-RKA was simulated again using three-dimensional code CHIPIC, taking RF input power, beam voltage, and beam current as 4.4 kW, 420 kV, and 3.22 kA ( $= {14} \times {230}$ A, 14 being the beam number), respectively, predicting the output power, gain, and efficiency of the device as 810 MW, 53 dB, and 60%, respectively. Finally, the designed CCMB-RKA was built and experimented with. Through 20 groups of the comparative experiments, the GW-level RF output power of the device, typically, 1.027 GW (peak), 60 ns pulse was demonstrated with 55% efficiency, 370 phase jitter, and 53 dB gain, taking the RF input power, beam voltage, and beam current as 4.8 kW, 453 kV, and 4.1 kA, respectively. The results establish the potential of the CCMB-RKA developed for high-power microwave applications.
- 22 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (10) , 1760-1763
Short-Length, High-Efficiency S-Band Coaxial Cavity Relativistic Multibeam Klystron Amplifier for Potential High Power Microwave Application
This letter reports the successful development of an S-band short-length, high-efficiency, coaxial cavity multi-beam relativistic klystron amplifier (CCMB-RKA). The simulation in one-dimensional genetic algorithm, capable of giving high-efficiency parameters, predicted 67% efficiency of CCMB-RKA, taking the interaction length as 600 mm, beam voltage as 420 kV, and beam current as 230 A. However, for accurate results, the CCMB-RKA was simulated again using three-dimensional code CHIPIC, taking RF input power, beam voltage, and beam current as 4.4 kW, 420 kV, and 3.22 kA ( $= {14} \times {230}$ A, 14 being the beam number), respectively, predicting the output power, gain, and efficiency of the device as 810 MW, 53 dB, and 60%, respectively. Finally, the designed CCMB-RKA was built and experimented with. Through 20 groups of the comparative experiments, the GW-level RF output power of the device, typically, 1.027 GW (peak), 60 ns pulse was demonstrated with 55% efficiency, 370 phase jitter, and 53 dB gain, taking the RF input power, beam voltage, and beam current as 4.8 kW, 453 kV, and 4.1 kA, respectively. The results establish the potential of the CCMB-RKA developed for high-power microwave applications.