Limin Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Limin Sun has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Shifeng Li
Institute of Applied Electronics, China Academy of Engineering Physics
8 shared publications - Zhenbang Liu
National Key Laboratory of Science and Technology on Advanced Laser and High Power Microwave, Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang, China
7 shared publications Hua Huang
National Key Laboratory of Science and Technology on Advanced Laser and High Power Microwave, Institute of Applied Electronics, CAEP, Mianyang, China
5 shared publicationsHu He
National Key Laboratory of Science and Technology on Advanced Laser and High Power Microwave, Institute of Applied Electronics, CAEP, Mianyang, China
4 shared publicationsKe He
National Key Laboratory of Science and Technology on Advanced Laser and High Power Microwave, Institute of Applied Electronics, CAEP, Mianyang, China
4 shared publications- Hezhang Zhao
National Key Laboratory of Science and Technology on Advanced Laser and High Power Microwave, Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang, China
3 shared publications
Latest Publications
- Open Access
- 24 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 47485-47495
Data-Driven Sensitivity Analysis and Hybrid Multi-Objective Optimization for Ultra-High Performance Klystron
This study presents a data-driven framework integrating sensitivity analysis with hybrid multi-objective optimization to improve both the physical performance and design efficiency of high-performance klystrons. A random forest–based Normalized Output Variation (NOV) method is developed to quantitatively assess the influence of design parameters, and an adaptive parameter-range adjustment strategy is employed to enable effective variable screening and range contraction, significantly enhancing computational efficiency. The framework incorporates a hybrid multi-objective optimizer with periodic elite migration, which balances population diversity and global exploration by combining NSGA-II’s rapid convergence with OMOPSO’s local search precision, achieving 71.7% 1D design efficiency.Arepresentative design from the hybrid Pareto front is selected for 3D validation and refinement using CHIPIC particle-in-cell simulations, achieving 61% efficiency at an interaction length of 5.3 operating wavelengths. This represents the highest simulated efficiency and most compact structure among recent S- to Ka-band relativistic klystron amplifiers (RKA). The proposed framework demonstrates a robust and efficient data-driven paradigm not only for klystron design but also for the optimization of other complex vacuum electronic devices and microwave systems.
- 24 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 47485-47495
Open AccessData-Driven Sensitivity Analysis and Hybrid Multi-Objective Optimization for Ultra-High Performance Klystron
This study presents a data-driven framework integrating sensitivity analysis with hybrid multi-objective optimization to improve both the physical performance and design efficiency of high-performance klystrons. A random forest–based Normalized Output Variation (NOV) method is developed to quantitatively assess the influence of design parameters, and an adaptive parameter-range adjustment strategy is employed to enable effective variable screening and range contraction, significantly enhancing computational efficiency. The framework incorporates a hybrid multi-objective optimizer with periodic elite migration, which balances population diversity and global exploration by combining NSGA-II’s rapid convergence with OMOPSO’s local search precision, achieving 71.7% 1D design efficiency.Arepresentative design from the hybrid Pareto front is selected for 3D validation and refinement using CHIPIC particle-in-cell simulations, achieving 61% efficiency at an interaction length of 5.3 operating wavelengths. This represents the highest simulated efficiency and most compact structure among recent S- to Ka-band relativistic klystron amplifiers (RKA). The proposed framework demonstrates a robust and efficient data-driven paradigm not only for klystron design but also for the optimization of other complex vacuum electronic devices and microwave systems.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 61402-61413
Physics-Constrained Conditional Inverse Design of Relativistic Klystrons via a Split-Merge Tandem Framework
The development of Relativistic Klystron Amplifiers (RKAs) has long been hindered by prolonged design cycles, primarily due to the strong nonlinearity of beam-wave interactions, the high dimensionality of the parameter space, and the prohibitive computational cost of Particle-in-Cell (PIC) simulations. To address these challenges, this paper proposes a conditional inverse design framework that integrates surrogate modeling with physical constraints for the efficient generation of RKA structural parameters. First, using a PIC simulation model of an X-band single-beam seven-cavity RKA as a physical baseline, equivalent one-dimensional (1D) parameters of the resonant cavities are extracted and combined with electron beam characteristics to construct a 33-dimensional design parameter space with explicit physical constraints. Subsequently, a fast 1D large-signal simulation software KlyH is employed to generate approximately $1.3 \times 10^{5}$ samples. These samples are used to train a forward surrogate model, enabling accurate characterization of the nonlinear mapping between design parameters and device efficiency. To satisfy the hard constraints prevalent in engineering design, a Split-Merge tandem neural network architecture is introduced. By directly embedding user-defined constraint parameters into the design vector, this architecture facilitates conditional inverse generation while guaranteeing strict satisfaction of the constraints at the network structure level. Comparative validation demonstrates that the generated designs achieve an average error of 3.7% against the KlyH baseline. Furthermore, when verifying these designs in PIC simulations, the results show a maximum deviation of 8.8% compared to the KlyH. The proposed framework significantly reduces the computational burden of inverse design while maintaining essential physical consistency, offering a practical solution for the rapid optimization and engineering design of RKAs.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 61402-61413
Open AccessPhysics-Constrained Conditional Inverse Design of Relativistic Klystrons via a Split-Merge Tandem Framework
The development of Relativistic Klystron Amplifiers (RKAs) has long been hindered by prolonged design cycles, primarily due to the strong nonlinearity of beam-wave interactions, the high dimensionality of the parameter space, and the prohibitive computational cost of Particle-in-Cell (PIC) simulations. To address these challenges, this paper proposes a conditional inverse design framework that integrates surrogate modeling with physical constraints for the efficient generation of RKA structural parameters. First, using a PIC simulation model of an X-band single-beam seven-cavity RKA as a physical baseline, equivalent one-dimensional (1D) parameters of the resonant cavities are extracted and combined with electron beam characteristics to construct a 33-dimensional design parameter space with explicit physical constraints. Subsequently, a fast 1D large-signal simulation software KlyH is employed to generate approximately $1.3 \times 10^{5}$ samples. These samples are used to train a forward surrogate model, enabling accurate characterization of the nonlinear mapping between design parameters and device efficiency. To satisfy the hard constraints prevalent in engineering design, a Split-Merge tandem neural network architecture is introduced. By directly embedding user-defined constraint parameters into the design vector, this architecture facilitates conditional inverse generation while guaranteeing strict satisfaction of the constraints at the network structure level. Comparative validation demonstrates that the generated designs achieve an average error of 3.7% against the KlyH baseline. Furthermore, when verifying these designs in PIC simulations, the results show a maximum deviation of 8.8% compared to the KlyH. The proposed framework significantly reduces the computational burden of inverse design while maintaining essential physical consistency, offering a practical solution for the rapid optimization and engineering design of RKAs.
- Open Access
- 30 May 2025
- Published by MDPI AG in Electronics
- Vol. 14 (11) , 2223
KlyH: 1D Disk Model-Based Large-Signal Simulation Software for Klystrons
This paper presents KlyH, a new 1D (one-dimensional) large-signal simulation software for klystrons, designed to deliver efficient and accurate simulation and optimization tools. KlyH integrates a Fortran-based dynamic link library (DLL) as its computational core, which employs high-performance numerical algorithms to rapidly compute critical parameters such as efficiency, gain, and bandwidth. Compared with traditional 1D simulation tools, which often lack open interfaces and extensibility, KlyH is built with a modular and open architecture that supports seamless integration with advanced optimization and intelligent design algorithms. KlyH incorporates multi-objective optimization frameworks, notably the Non-Dominated Sorting Genetic Algorithm II (NSGA-II) and Optimized Multi-Objective Particle Swarm Optimization (OMOPSO), enabling automated parameter tuning for efficiency maximization and interaction length optimization. Its bandwidth-of-klystron-analysis module predicts gain and output power across operational bandwidths, with optimization algorithms further enhancing bandwidth performance. A Java-based graphical user interface (GUI) provides an intuitive workflow for parameter configuration and real-time visualization of simulation results. The open architecture also lays the foundation for future integration of artificial intelligence algorithms, promoting intelligent and automated klystron design workflows. The accuracy of KlyH and its potential for parameter optimization are confirmed by a case study on an X-band relativistic klystron amplifier. Discrepancies observed between 1D simulations and 3D PIC (three-dimensional particle-in-cell) simulation results are analyzed to identify model limitations, providing critical insights for advancing high-performance klystron designs.
- 30 May 2025
- Published by MDPI AG in Electronics
- Vol. 14 (11) , 2223
Open AccessKlyH: 1D Disk Model-Based Large-Signal Simulation Software for Klystrons
This paper presents KlyH, a new 1D (one-dimensional) large-signal simulation software for klystrons, designed to deliver efficient and accurate simulation and optimization tools. KlyH integrates a Fortran-based dynamic link library (DLL) as its computational core, which employs high-performance numerical algorithms to rapidly compute critical parameters such as efficiency, gain, and bandwidth. Compared with traditional 1D simulation tools, which often lack open interfaces and extensibility, KlyH is built with a modular and open architecture that supports seamless integration with advanced optimization and intelligent design algorithms. KlyH incorporates multi-objective optimization frameworks, notably the Non-Dominated Sorting Genetic Algorithm II (NSGA-II) and Optimized Multi-Objective Particle Swarm Optimization (OMOPSO), enabling automated parameter tuning for efficiency maximization and interaction length optimization. Its bandwidth-of-klystron-analysis module predicts gain and output power across operational bandwidths, with optimization algorithms further enhancing bandwidth performance. A Java-based graphical user interface (GUI) provides an intuitive workflow for parameter configuration and real-time visualization of simulation results. The open architecture also lays the foundation for future integration of artificial intelligence algorithms, promoting intelligent and automated klystron design workflows. The accuracy of KlyH and its potential for parameter optimization are confirmed by a case study on an X-band relativistic klystron amplifier. Discrepancies observed between 1D simulations and 3D PIC (three-dimensional particle-in-cell) simulation results are analyzed to identify model limitations, providing critical insights for advancing high-performance klystron designs.
- 26 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (12) , 6571-6578
Compact, Stable, Repetitive GW-Level S -Band Multibeam Relativistic Klystron Amplifier Operating Over a Longer Period in a Lower Magnetic Field
The design, based on theory, simulation, and cold as well as hot tests, is proposed for a compact GW-level multibeam relativistic klystron amplifier (MB-RKA) with a low beam confining magnetic field in the $\textit{S}$ -band, which can operate repeatedly and stably up to 8 min. For this purpose, graphene cathodes and a microchannel water cooling system were used. For the sake of compactness, the input section of the MB-RKA was taken as a cylindrical conformal sectorial waveguide and the output section as an inner cylindrical coaxial waveguide. The experiments were performed with a magnetic field of 0.39 T. In the single-pulse operation, the output power, pulsewidth, gain, and efficiency of the device were experimentally found as 1.047 GW, 68 ns, 56 dB, and 37% respectively, when the beam voltage, beam current, and injected power were taken as 530 kV, 5.30 kA, and 2.40 kW, respectively. In the multipulse operation at a pulse repetition rate of 20 Hz, over a period of 8 min, the MB-RKA experimentally delivered the mean output power of 0.889 GW of 42-ns pulsewidth, taking the mean beam voltage and current as 551 kV and 5.14 kA, respectively.
- 26 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (12) , 6571-6578
Compact, Stable, Repetitive GW-Level S -Band Multibeam Relativistic Klystron Amplifier Operating Over a Longer Period in a Lower Magnetic Field
The design, based on theory, simulation, and cold as well as hot tests, is proposed for a compact GW-level multibeam relativistic klystron amplifier (MB-RKA) with a low beam confining magnetic field in the $\textit{S}$ -band, which can operate repeatedly and stably up to 8 min. For this purpose, graphene cathodes and a microchannel water cooling system were used. For the sake of compactness, the input section of the MB-RKA was taken as a cylindrical conformal sectorial waveguide and the output section as an inner cylindrical coaxial waveguide. The experiments were performed with a magnetic field of 0.39 T. In the single-pulse operation, the output power, pulsewidth, gain, and efficiency of the device were experimentally found as 1.047 GW, 68 ns, 56 dB, and 37% respectively, when the beam voltage, beam current, and injected power were taken as 530 kV, 5.30 kA, and 2.40 kW, respectively. In the multipulse operation at a pulse repetition rate of 20 Hz, over a period of 8 min, the MB-RKA experimentally delivered the mean output power of 0.889 GW of 42-ns pulsewidth, taking the mean beam voltage and current as 551 kV and 5.14 kA, respectively.
- 21 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (12) , 2177-2179
Stable Operation of a Repetitively Pulsed X-Band Gigawatt Long Pulse Coaxial Multi-Beam Relativistic Klystron Amplifier
In this paper, the stability of an X band gigawatt coaxial multi-beam relativistic klystron amplifier (CMB-RKA) operating in repetitively pulsed mode was investigated by the particle-in-cell (PIC) simulation and experiments. A four-gap extended-interaction output cavity was optimized to avoid electrons reflection. And a water-cooled electron beams collector which was integrated with the output mode converter was designed to reduce the plasma and secondary electrons. The explosive emission conditions were improved by using the C–C composite material cathode, and the titanium beam-wave interaction structure was used to replace the stainless steel structure. All these factors brought greater stability of the CMB-RKA. In the experiment, the X-band CMB-RKA can operate at a 20 pps repetition rate with duration of 120 seconds, when the output power was about 0.95 GW with pulse width of 160 ns. The long-term stability of the X-band CMB-RKA performances during 10 5 pulses was realized, which is driven by a long pulse compact accelerator.
- 21 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (12) , 2177-2179
Stable Operation of a Repetitively Pulsed X-Band Gigawatt Long Pulse Coaxial Multi-Beam Relativistic Klystron Amplifier
In this paper, the stability of an X band gigawatt coaxial multi-beam relativistic klystron amplifier (CMB-RKA) operating in repetitively pulsed mode was investigated by the particle-in-cell (PIC) simulation and experiments. A four-gap extended-interaction output cavity was optimized to avoid electrons reflection. And a water-cooled electron beams collector which was integrated with the output mode converter was designed to reduce the plasma and secondary electrons. The explosive emission conditions were improved by using the C–C composite material cathode, and the titanium beam-wave interaction structure was used to replace the stainless steel structure. All these factors brought greater stability of the CMB-RKA. In the experiment, the X-band CMB-RKA can operate at a 20 pps repetition rate with duration of 120 seconds, when the output power was about 0.95 GW with pulse width of 160 ns. The long-term stability of the X-band CMB-RKA performances during 10 5 pulses was realized, which is driven by a long pulse compact accelerator.
- 22 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (10) , 1760-1763
Short-Length, High-Efficiency S-Band Coaxial Cavity Relativistic Multibeam Klystron Amplifier for Potential High Power Microwave Application
This letter reports the successful development of an S-band short-length, high-efficiency, coaxial cavity multi-beam relativistic klystron amplifier (CCMB-RKA). The simulation in one-dimensional genetic algorithm, capable of giving high-efficiency parameters, predicted 67% efficiency of CCMB-RKA, taking the interaction length as 600 mm, beam voltage as 420 kV, and beam current as 230 A. However, for accurate results, the CCMB-RKA was simulated again using three-dimensional code CHIPIC, taking RF input power, beam voltage, and beam current as 4.4 kW, 420 kV, and 3.22 kA ( $= {14} \times {230}$ A, 14 being the beam number), respectively, predicting the output power, gain, and efficiency of the device as 810 MW, 53 dB, and 60%, respectively. Finally, the designed CCMB-RKA was built and experimented with. Through 20 groups of the comparative experiments, the GW-level RF output power of the device, typically, 1.027 GW (peak), 60 ns pulse was demonstrated with 55% efficiency, 370 phase jitter, and 53 dB gain, taking the RF input power, beam voltage, and beam current as 4.8 kW, 453 kV, and 4.1 kA, respectively. The results establish the potential of the CCMB-RKA developed for high-power microwave applications.
- 22 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (10) , 1760-1763
Short-Length, High-Efficiency S-Band Coaxial Cavity Relativistic Multibeam Klystron Amplifier for Potential High Power Microwave Application
This letter reports the successful development of an S-band short-length, high-efficiency, coaxial cavity multi-beam relativistic klystron amplifier (CCMB-RKA). The simulation in one-dimensional genetic algorithm, capable of giving high-efficiency parameters, predicted 67% efficiency of CCMB-RKA, taking the interaction length as 600 mm, beam voltage as 420 kV, and beam current as 230 A. However, for accurate results, the CCMB-RKA was simulated again using three-dimensional code CHIPIC, taking RF input power, beam voltage, and beam current as 4.4 kW, 420 kV, and 3.22 kA ( $= {14} \times {230}$ A, 14 being the beam number), respectively, predicting the output power, gain, and efficiency of the device as 810 MW, 53 dB, and 60%, respectively. Finally, the designed CCMB-RKA was built and experimented with. Through 20 groups of the comparative experiments, the GW-level RF output power of the device, typically, 1.027 GW (peak), 60 ns pulse was demonstrated with 55% efficiency, 370 phase jitter, and 53 dB gain, taking the RF input power, beam voltage, and beam current as 4.8 kW, 453 kV, and 4.1 kA, respectively. The results establish the potential of the CCMB-RKA developed for high-power microwave applications.
- Open Access
- 24 June 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (7) , 986
A Substrate Integrated Waveguide-Based W-Band Antenna for Microwave Power Transmission
A W-band slot array antenna based on a substrate integrated waveguide (SIW) for microwave power transmission (MPT) is proposed in this paper. By size optimization, the transition from the rectifier element to the antenna is limited to a small size. It realizes a compact arrangement of the radiating slots, which not only improves the aperture efficiency of the antenna but also makes it easy to integrate into a large-scale array. For antenna testing, a coplanar waveguide–SIW–rectangular waveguide transition structure is added at the end of the antenna, and an antenna with this transition structure is processed by PCB printing technology and measured. The measured reflection coefficient is less than −10 dB at 90–96 GHz, the aperture efficiency is greater than 60% at 93.5–94.5 GHz, the maximum gain is 13.2 dB at 93.5 GHz, and the aperture efficiency is 79%. The test results of the antenna show that the antenna has a good performance and can be applied to the MPT system as a rectenna.
- 24 June 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (7) , 986
Open AccessA Substrate Integrated Waveguide-Based W-Band Antenna for Microwave Power Transmission
A W-band slot array antenna based on a substrate integrated waveguide (SIW) for microwave power transmission (MPT) is proposed in this paper. By size optimization, the transition from the rectifier element to the antenna is limited to a small size. It realizes a compact arrangement of the radiating slots, which not only improves the aperture efficiency of the antenna but also makes it easy to integrate into a large-scale array. For antenna testing, a coplanar waveguide–SIW–rectangular waveguide transition structure is added at the end of the antenna, and an antenna with this transition structure is processed by PCB printing technology and measured. The measured reflection coefficient is less than −10 dB at 90–96 GHz, the aperture efficiency is greater than 60% at 93.5–94.5 GHz, the maximum gain is 13.2 dB at 93.5 GHz, and the aperture efficiency is 79%. The test results of the antenna show that the antenna has a good performance and can be applied to the MPT system as a rectenna.
- Open Access
- 17 January 2022
- Published by MDPI AG in Electronics
- Vol. 11 (2) , 281
Investigation on High-Efficiency Beam-Wave Interaction for Coaxial Multi-Beam Relativistic Klystron Amplifier
To significantly improve the electronic efficiency of coaxial multi-beam relativistic klystron amplifier (CMB-RKA), the physical process of beam-wave interaction and parameters that affect efficiency was studied. First, the high efficiency of beam-wave interaction was discussed by simulating the efficiency versus the parameters (frequency of cavity, drift tube length between cavities, and external quality factor of output cavity), in the one-dimensional (1-D) large-signal simulation software. Moreover, the further physical process of beam-wave interaction was analyzed through simulating the current modulation factor and the number of particles at the entrance of the output cavity, in the three-dimensional (3-D) particle in cell simulation software. Last, with the optimal parameters in 3-D simulations, the CMB-RKA, which has 14 electron beams with a total current of 4.2 kA (14 × 300 A), can generate an output power of 1.02 GW with a saturation gain of 55.6 dB and an efficiency of 48.7%, when beam voltage is 500 kV, which indicated the CMB-RKA can achieve high efficiency for high-power microwave radiation.
- 17 January 2022
- Published by MDPI AG in Electronics
- Vol. 11 (2) , 281
Open AccessInvestigation on High-Efficiency Beam-Wave Interaction for Coaxial Multi-Beam Relativistic Klystron Amplifier
To significantly improve the electronic efficiency of coaxial multi-beam relativistic klystron amplifier (CMB-RKA), the physical process of beam-wave interaction and parameters that affect efficiency was studied. First, the high efficiency of beam-wave interaction was discussed by simulating the efficiency versus the parameters (frequency of cavity, drift tube length between cavities, and external quality factor of output cavity), in the one-dimensional (1-D) large-signal simulation software. Moreover, the further physical process of beam-wave interaction was analyzed through simulating the current modulation factor and the number of particles at the entrance of the output cavity, in the three-dimensional (3-D) particle in cell simulation software. Last, with the optimal parameters in 3-D simulations, the CMB-RKA, which has 14 electron beams with a total current of 4.2 kA (14 × 300 A), can generate an output power of 1.02 GW with a saturation gain of 55.6 dB and an efficiency of 48.7%, when beam voltage is 500 kV, which indicated the CMB-RKA can achieve high efficiency for high-power microwave radiation.
- Open Access
- 1 January 2013
- Published by China Science Publishing & Media Ltd. in JOURNAL OF INFRARED AND MILLIMETER WAVES
- Vol. 32 (5) , 400-+
A Pierce electron gun based on carbon nanotube cold cathodes
- 1 January 2013
- Published by China Science Publishing & Media Ltd. in JOURNAL OF INFRARED AND MILLIMETER WAVES
- Vol. 32 (5) , 400-+
Open AccessA Pierce electron gun based on carbon nanotube cold cathodes
- Open Access
- 27 January 2012
- Published by SAGE Publications in Journal of Biomaterials Applications
- Vol. 27 (6) , 695-705
Nanofiber scaffold gradients for interfacial tissue engineering
We have designed a 2-spinnerette device that can directly electrospin nanofiber scaffolds containing a gradient in composition that can be used to engineer interfacial tissues such as ligament and tendon. Two types of nanofibers are simultaneously electrospun in an overlapping pattern to create a nonwoven mat of nanofibers containing a composition gradient. The approach is an advance over previous methods due to its versatility – gradients can be formed from any materials that can be electrospun. A dye was used to characterize the 2-spinnerette approach and applicability to tissue engineering was demonstrated by fabricating nanofibers with gradients in amorphous calcium phosphate nanoparticles (nACP). Adhesion and proliferation of osteogenic cells (MC3T3-E1 murine pre-osteoblasts) on gradients was enhanced on the regions of the gradients that contained higher nACP content yielding a graded osteoblast response. Since increases in soluble calcium and phosphate ions stimulate osteoblast function, we measured their release and observed significant release from nanofibers containing nACP. The nanofiber-nACP gradients fabricated herein can be applied to generate tissues with osteoblast gradients such as ligaments or tendons. In conclusion, these results introduce a versatile approach for fabricating nanofiber gradients that can have application for engineering graded tissues.
- 27 January 2012
- Published by SAGE Publications in Journal of Biomaterials Applications
- Vol. 27 (6) , 695-705
Open AccessNanofiber scaffold gradients for interfacial tissue engineering
We have designed a 2-spinnerette device that can directly electrospin nanofiber scaffolds containing a gradient in composition that can be used to engineer interfacial tissues such as ligament and tendon. Two types of nanofibers are simultaneously electrospun in an overlapping pattern to create a nonwoven mat of nanofibers containing a composition gradient. The approach is an advance over previous methods due to its versatility – gradients can be formed from any materials that can be electrospun. A dye was used to characterize the 2-spinnerette approach and applicability to tissue engineering was demonstrated by fabricating nanofibers with gradients in amorphous calcium phosphate nanoparticles (nACP). Adhesion and proliferation of osteogenic cells (MC3T3-E1 murine pre-osteoblasts) on gradients was enhanced on the regions of the gradients that contained higher nACP content yielding a graded osteoblast response. Since increases in soluble calcium and phosphate ions stimulate osteoblast function, we measured their release and observed significant release from nanofibers containing nACP. The nanofiber-nACP gradients fabricated herein can be applied to generate tissues with osteoblast gradients such as ligaments or tendons. In conclusion, these results introduce a versatile approach for fabricating nanofiber gradients that can have application for engineering graded tissues.