WZWenshen Zhou

Wenshen Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenshen Zhou has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Compact Broadband Planar Resonator With a Viaed Double Spiral for Robust Wireless Power Transfer

    by Wenshen Zhou, Pengde Wu, Wen Chuan Mu, Wenwei Yu, Shao Ying Huang

    A common problem for most strongly coupled magnetic resonance (SCMR) wireless power transfer (WPT) systems is the dramatic efficiency drops by surrounding high-dielectric objects, e.g., people, caused by the narrow bandwidth of the systems due to a high quality factor ( $Q$ ). In this paper, a compact broadband planar double-spiral resonator with a via is proposed to obtain a robust SCMR system with a stable efficiency where interference from high-dielectric surrounding objects is mitigated. The increased bandwidth is obtained without compromising power transfer efficiency by introducing coupling enhancement to the structure while $Q$ is reduced. The bandwidth of the system is increased by over 15% compared to a conventional system with single-sided resonators, and the efficiency is comparable. In this paper, it is found that the location of the via affects both the efficiency and bandwidth of the SCMR system. Meanwhile, this paper reports an experiment with human hand phantom and a simulation study with multi-layered tissue model, both of which mimic a real human-involved environment, and successfully demonstrate the stability and high efficiency of power transfer of the proposed broadband resonators in a WPT system. Moreover, the proposed structure is tested to be less sensitive to misalignment between the transmitter and the receiver, and the proposed method is compared to the systems proposed for similar human-involved environments. This proposed viaed double-spiral resonator is a promising candidate for a robust WPT system for human-involved environments.


  • Modeling the Self-Capacitance of an Irregular Solenoid

    by Wenshen Zhou, Shao Ying Huang

    Irregular solenoids, i.e., sparse solenoids, varied-pitch solenoids, and noncylindrical solenoids, has started to appear recently for specific applications, and an accurate and fast modeling of their self-capacitance is necessary to accelerate the design and optimization process of such coils. Conventional capacitance modeling methods only work for coils, which are standard tightly wound cylindrical solenoids, but fail for irregular solenoids. Full-wave electromagnetic (EM) simulators provide good accuracy, but the computation time is usually long. In this article, a fast and accurate model to calculate the self-capacitance of an irregular solenoid is proposed. A modified turn-to-turn capacitance model, which considers the capacitance in the insulation layer of a wire as well as the air capacitance between the nearest neighbouring loops and the second nearest neighbouring loops is adopted. It works for solenoids of different types (e.g., sparse, varied-pitched, and noncylindrical ones). The accuracy of the proposed model is validated by comparing the calculation results to both those obtained by using commercial full-wave simulators and experimental results. For sparse solenoids, the proposed model is always accurate for coils with either small or large pitches. For varied-pitch solenoid and noncylindrical solenoid, the error rate of the proposed model is around 10%. Computational time wise, the computation time of the proposed model is reduced by over $10^4$ times compared to that of a commercial EM simulator whereas the accuracy is comparable.


  • A Wide Dynamic Range Rectifier Array Based on Automatic Input Power Distribution Technique

    by Pengde Wu, Yi-Dan Chen, Wenshen Zhou, Zhi Hua Ren, Shao Ying Huang

    In this letter, a microwave rectifier array using an automatic input power distribution technique (AIPDT) is proposed to achieve high conversion efficiency over a wide dynamic input power range. The rectifier array employs two rectifier cells operating at low- and high-power levels, respectively, and utilizes AIPDT to distribute the RF input power between them according to the input power level. In this way, a high RF-dc power conversion efficiency (PCE) and a low reflection coefficient over a wide input power range are achieved. For validation, the proposed rectifier array at 2.4 GHz was designed, fabricated, and characterized. The experimental results show that the PCE maintains over 50% when the input power ranges from 2.2 to 26.5 dBm, and the input power range for PCE > 30% is from -7 to 30 dBm. Besides, the reflection coefficient remains less than -10 dB over a 40-dB dynamic range (-10 to 30 dBm).


  • An Accurate Model for Fast Calculating the Resonant Frequency of an Irregular Solenoid

    by Wenshen Zhou, Shaoying Huang

    A fast and accurate calculation of the resonant frequency of a solenoid coil is needed in many applications, e.g., wireless power transfer and magnetic resonance imaging. It helps to accelerate the design and optimization of a coil. However, the existing calculation models for the key equivalent parameters, the inductance ( $L$ ) and the capacitance ( $C$ ), of the solenoid coils can only provide estimations for standard tightly wound cylindrical coils, and the accuracy is not high. There are no accurate models available for calculating $L$ , $C$ , and the resonant frequency when a solenoid becomes irregular, e.g., when it is sparse (with a large pitch), when it has nonuniform pitches, or when it is noncylindrical. In this paper, we propose a fast and accurate model for such an irregular solenoid coil to calculate its inductance, capacitance, and, thus, the resonant frequency. The accuracy of the proposed model is tested on the solenoid coils (with large pitches, nonuniform pitches, or noncylindrical shape) by comparing the calculated results to those using commercial simulation software and the measurement results. For a sparsely wound solenoid, the proposed model provides an accurate calculation of the inductance with a maximal pitch-to-wire-diameter ratio of 40 (an error rate of 8.33% at this ratio). For a varied-pitch solenoid and a noncylindrical one, an error rate of less than 5% can be achieved for a calculation of the inductance.


  • Compact High-Efficiency Broadband Rectifier With Multi-Stage-Transmission-Line Matching

    by Pengde Wu, Shao Ying Huang, Wenshen Zhou, Wenwei Yu, Zhenlong Liu, Xiaojie Chen, Changjun Liu

    This brief proposes a compact high-efficiency broadband microwave rectifier for energy harvesting. The proposed rectifier is designed to operate over a broad bandwidth spanning from 2 to 3 GHz and an input power dynamic range from 0 dBm to 10 dBm. In the proposed structure, a compact broadband low-loss matching network and a dc-pass filter with a broad stopband were designed, leading to a high conversion efficiency in a wide frequency range with compactness. For the matching network, low loss and compact size were achieved by strategically choosing and designing three transmission line segments. Moreover, the proposed dc-pass filter is compact and can effectively block broadband RF signal and its in-band high order harmonics. Theoretical analysis and simulations of the proposed structure were carried out. A prototype was fabricated, which demonstrates a broadband bandwidth of 41.5% (2.0-3.05 GHz) where the RF-dc power conversion efficiency is higher than 70% at an input power of 10 dBm. The measured efficiency remains over 45% within 1.9-3.05 GHz when the input power decreases to 0 dBm. The maximum measured efficiency is 75.8% at an input power of 14 dBm.


  • High-Efficient Rectifier With Extended Input Power Range Based on Self-Tuning Impedance Matching

    by Pengde Wu, Shao Ying Huang, Wenshen Zhou, Zhi Hua Ren, Zhenlong Liu, Kama Huang, Changjun Liu

    In this letter, a microwave rectifier with a wide input power range is presented by proposing a self-tuning impedance matching (STIM). The STIM consists of a varactor reversely biased by the output voltage of the rectifier to compensate the variation of the input impedance caused by the input power, so that impedance matching is obtained over a wider input power range. For validation, the proposed rectifier at 2.4 GHz was designed and implemented. The experimental results show that the RF-dc power conversion efficiency maintains over 50% and 70% within the input power ranges of 2.5-25.5 dBm and 11-24.5 dBm, respectively. Compared with the counterpart without the STIM, an improvement of 7.2 dB in terms of the input power range when the reflection coefficient is less than -10 dB was successfully demonstrated.


  • A Wideband Strongly Coupled Magnetic Resonance Wireless Power Transfer System and Its Circuit Analysis

    by Wenshen Zhou, Srikumar Sandeep, Pengde Wu, Peng Yang, Wenwei Yu, Shao Ying Huang

    Conventional strongly coupled magnetic resonance (SCMR) wireless power transfer (WPT) systems have high quality factor (Q), leading to limited system bandwidths. In practical applications, especially in human-involved environments, the resonant frequency of SCMR resonators will shift due to the effect of highly dielectric human body. In this letter, a wideband four-coil SCMR WPT system is proposed by improving the coupling between the tx/rx coil and their corresponding resonators. The bandwidth is increased by over 100% compared to a conventional system without sacrificing the efficiency much. The wideband feature is demonstrated by both simulation and measurement. It is analyzed physically and by using an equivalent circuit analysis.


  • One Octave Bandwidth Rectifier With a Frequency Selective Diode Array

    by Pengde Wu, Shao Ying Huang, Wenshen Zhou, Changjun Liu

    In this paper, a high-efficiency rectifier with one octave bandwidth is proposed by proposing a diode array with a frequency selective topology. With the frequency selective topology, the low-and high-band rectifiers are combined together without extra matching circuit at the input leading to a high-efficiency broadband design. For validation, a prototype rectifier was fabricated and characterized. The measured results show that the RF-dc power conversion efficiency (PCE) maintains above 70% from 1.75 to 3.55 GHz at an input power of 10 dBm. The measured PCE remains more than 50% within 1.4-3.7 GHz and the |S₁₁| is lower than -10 dB from 1.7 to 3.6 GHz.