Francesco Barbon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Francesco Barbon has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Koelpin
Hamburg University of Technology
29 shared publications - Stefan Lindner
Institute for Electronics Engineering, Friedrich-Alexander University of Erlangen-Nuremberg, Erlangen, Germany
27 shared publications Robert Weigel
Institute for Electronics Engineering, University of Erlangen-Nuremberg, Cauerstr. 9, 91058 Erlangen, Germany
17 shared publications- Sarah Linz
Institute for Electronics Engineering, Friedrich-Alexander University of Erlangen-Nuremberg, Erlangen, Germany
17 shared publications - Gabor Vinci
Institute for Electronics Engineering, University of Erlangen-Nuremberg, Cauerstr. 9, 91058, Germany
11 shared publications Sebastian Mann
Institute for Electronics Engineering, Friedrich-Alexander University of Erlangen-Nuremberg, Cauerstrasse 9, 91058, Germany
11 shared publications
Latest Publications
- 25 February 2015
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 7 (3-4) , 425-432
Distance measurements and limitations based on guided wave 24 GHz dual tone Six-port radar
In the following, a continuous wave radar system based on the Six-port principle will be shown for measurement tasks at enclosed systems needing micrometer accuracy as well as high update rates like tank level monitoring or hydraulic cylinder piston control. To exceed the ambiguity limit of such an interferometric system, a dual tone approach is used. The system will be presented with measurement results at 24 GHz within a WR42 waveguide to prove the feasibility of the proposed concept. Furthermore, considerations on timing will show the potential as a low-latency system, capable of high measurement data update rates, and different influences on the system performance and limitations of such a system will be discussed in comparison to alternative setups.
- 25 February 2015
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 7 (3-4) , 425-432
Distance measurements and limitations based on guided wave 24 GHz dual tone Six-port radar
In the following, a continuous wave radar system based on the Six-port principle will be shown for measurement tasks at enclosed systems needing micrometer accuracy as well as high update rates like tank level monitoring or hydraulic cylinder piston control. To exceed the ambiguity limit of such an interferometric system, a dual tone approach is used. The system will be presented with measurement results at 24 GHz within a WR42 waveguide to prove the feasibility of the proposed concept. Furthermore, considerations on timing will show the potential as a low-latency system, capable of high measurement data update rates, and different influences on the system performance and limitations of such a system will be discussed in comparison to alternative setups.
- 1 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21642958,p. 111-113
A low power 24 GHz radar system for occupancy monitoring
This paper presents a low power 24GHz Doppler radar system for presence detection and occupancy monitoring. It is based on a minimalistic hardware approach and is able to wirelessly sense human respiratory signals so that even non-moving persons can be detected. By intermittently measuring, the average power consumption could be significantly reduced down to e.g. 0.2mW for 20 measurements per second. Experiments verify that, due to the short wavelength, the single channel receiver limitations can be neglected when only a detection of human respiratory but no evaluation of the breathing frequency is necessary.
- 1 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21642958,p. 111-113
A low power 24 GHz radar system for occupancy monitoring
This paper presents a low power 24GHz Doppler radar system for presence detection and occupancy monitoring. It is based on a minimalistic hardware approach and is able to wirelessly sense human respiratory signals so that even non-moving persons can be detected. By intermittently measuring, the average power consumption could be significantly reduced down to e.g. 0.2mW for 20 measurements per second. Experiments verify that, due to the short wavelength, the single channel receiver limitations can be neglected when only a detection of human respiratory but no evaluation of the breathing frequency is necessary.
- 1 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 44-46
Diode detector design for 61 GHz substrate integrated waveguide Six-Port radar systems
Radar sensors play a key role in today's industrial automation. Besides high accuracy, modern radar sensors have to feature high precision as well as challenging update rates. Six-Port wave correlators enable high phase resolution at high frequencies and therefore a high accuracy in radar applications. A low-cost Schottky diode detector applied to a substrate integrated waveguide (SIW) Six-Port is presented and measured. Furthermore, a displacement measurement using the SIW structure is performed.
- 1 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 44-46
Diode detector design for 61 GHz substrate integrated waveguide Six-Port radar systems
Radar sensors play a key role in today's industrial automation. Besides high accuracy, modern radar sensors have to feature high precision as well as challenging update rates. Six-Port wave correlators enable high phase resolution at high frequencies and therefore a high accuracy in radar applications. A low-cost Schottky diode detector applied to a substrate integrated waveguide (SIW) Six-Port is presented and measured. Furthermore, a displacement measurement using the SIW structure is performed.
- 1 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 20-22
100 GHz reflectometer for sensitivity analysis of MEMS sensors comprising an intermediate frequency Six-port receiver
Due to the growing market for Micro Electro Mechanical Systems (MEMS), especially for the application in mobile electronic devices like cameras, phones or tablet computers, cost and time efficient test and evaluation systems are required for the production process. This work presents a novel measurement setup for MEMS microphones, that allows an inline, contactless evaluation of the microphones' mechanical sensitivity at an early stage of the manufacturing process. A heterodyne receiver with a Six-port demodulator is deployed for displacement detection with micrometer resolution. Since the Six-port demodulator allows very high sampling rates, only limited by the analog-to-digital converter, short measurement times can be achieved.
- 1 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 20-22
100 GHz reflectometer for sensitivity analysis of MEMS sensors comprising an intermediate frequency Six-port receiver
Due to the growing market for Micro Electro Mechanical Systems (MEMS), especially for the application in mobile electronic devices like cameras, phones or tablet computers, cost and time efficient test and evaluation systems are required for the production process. This work presents a novel measurement setup for MEMS microphones, that allows an inline, contactless evaluation of the microphones' mechanical sensitivity at an early stage of the manufacturing process. A heterodyne receiver with a Six-port demodulator is deployed for displacement detection with micrometer resolution. Since the Six-port demodulator allows very high sampling rates, only limited by the analog-to-digital converter, short measurement times can be achieved.
- 1 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 29-31
ADC depending limitations for Six-Port based distance measurement systems
This publication will show some considerations for selecting an appropriate analog-digital-converter (ADC) in Six-Port based radar systems for distance measurements. It will be discussed how the ADC resolution is limiting the overall system range resolution. Furthermore, configurations with non-synchronous sampling of the four baseband signals and their influences on the system performance will be investigated.
- 1 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 29-31
ADC depending limitations for Six-Port based distance measurement systems
This publication will show some considerations for selecting an appropriate analog-digital-converter (ADC) in Six-Port based radar systems for distance measurements. It will be discussed how the ADC resolution is limiting the overall system range resolution. Furthermore, configurations with non-synchronous sampling of the four baseband signals and their influences on the system performance will be investigated.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 746-749
I/Q imbalance compensation for Six-port interferometers in radar applications
Six-port interferometers are of great interest for displacement and vibration measurements in industrial as well as medical applications. However, they show offsets as well as amplitude and phase imbalances in their differential in-phase and quadrature signals, leading to inaccuracies of the measured displacement. If a very slow moving or vibrating target has to be monitored, an additional phase shifter for calibration is needed, so that the system's errors can be compensated. A method for calculation and compensation of errors is presented and a compact and cost-efficient implementation of a phase shifter for 24 GHz Six-port interferometers is shown.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 746-749
I/Q imbalance compensation for Six-port interferometers in radar applications
Six-port interferometers are of great interest for displacement and vibration measurements in industrial as well as medical applications. However, they show offsets as well as amplitude and phase imbalances in their differential in-phase and quadrature signals, leading to inaccuracies of the measured displacement. If a very slow moving or vibrating target has to be monitored, an additional phase shifter for calibration is needed, so that the system's errors can be compensated. A method for calculation and compensation of errors is presented and a compact and cost-efficient implementation of a phase shifter for 24 GHz Six-port interferometers is shown.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 171-174
A low-cost 2.4GHz frequency measurement system for microsecond time domain pulses based on Six-Port technology
This paper presents a fast responding frequency measurement system based on Six-Port technology being able to determine precisely the frequency of very short time domain pulses of one microsecond and even less in the 2.4 GHz ISM band. By using a delay line the frequency measurement can be reduced to a phase measurement that can be quickly evaluated by the Six-Port network implemented with lumped components. The delay line, currently realized by a SMA cable, is extremely sensitive to temperature variations even in the range of 0.1K due to changes of the effective relative permittivity of the inner insulator. Thus, a temperature compensation method based on reference measurements is proposed and final measurements show that this system can reach a calibrated and temperature compensated error of only a few parts per million (ppm).
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 171-174
A low-cost 2.4GHz frequency measurement system for microsecond time domain pulses based on Six-Port technology
This paper presents a fast responding frequency measurement system based on Six-Port technology being able to determine precisely the frequency of very short time domain pulses of one microsecond and even less in the 2.4 GHz ISM band. By using a delay line the frequency measurement can be reduced to a phase measurement that can be quickly evaluated by the Six-Port network implemented with lumped components. The delay line, currently realized by a SMA cable, is extremely sensitive to temperature variations even in the range of 0.1K due to changes of the effective relative permittivity of the inner insulator. Thus, a temperature compensation method based on reference measurements is proposed and final measurements show that this system can reach a calibrated and temperature compensated error of only a few parts per million (ppm).
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 57-60
Distance measurements based on guided wave 24GHz dual tone six-port radar
In the following, a continuous wave (cw) radar system based on the Six-Port principle will be shown for measurement tasks at enclosed systems needing micrometer accuracy as well as high update rates like tank level monitoring or hydraulic cylinder piston control. To exceed the ambiguity limit of such an interferometric system a dual tone approach is used, extending the unambiguity range to several wavelengths. The system will be presented with measurement results at 24 GHz within a WR42 waveguide to prove the feasibility of the proposed concept.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 57-60
Distance measurements based on guided wave 24GHz dual tone six-port radar
In the following, a continuous wave (cw) radar system based on the Six-Port principle will be shown for measurement tasks at enclosed systems needing micrometer accuracy as well as high update rates like tank level monitoring or hydraulic cylinder piston control. To exceed the ambiguity limit of such an interferometric system a dual tone approach is used, extending the unambiguity range to several wavelengths. The system will be presented with measurement results at 24 GHz within a WR42 waveguide to prove the feasibility of the proposed concept.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 742-745
Extended range distance measurements based on frequency and power compensated Six-Port receiver
Six-Port interferometers for distance measurement show a low cost solution able to operate in harsh environment where other solutions are not suitable. The increase of the distance range requires new calibration strategies in order to compensate the signals' high dynamic power range. Here, an enhanced Six-Port receiver is presented having the capability of sensing the frequency of the reference signal and featuring a dynamic compensation of the power levels of the signals fed to the interferometer. These attributes allow the receiver to increase the distance detection range.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 742-745
Extended range distance measurements based on frequency and power compensated Six-Port receiver
Six-Port interferometers for distance measurement show a low cost solution able to operate in harsh environment where other solutions are not suitable. The increase of the distance range requires new calibration strategies in order to compensate the signals' high dynamic power range. Here, an enhanced Six-Port receiver is presented having the capability of sensing the frequency of the reference signal and featuring a dynamic compensation of the power levels of the signals fed to the interferometer. These attributes allow the receiver to increase the distance detection range.
- 1 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 300-303
Evaluation of the impact of antenna parameters on the performance of Six-port radar
The Six-port concept has been investigated in the last decades for numerous applications. Besides the use in network analyzers, communication transceivers and direction-of-arrival detectors the Six-port has also been applied in radar systems. Due to its excellent phase discrimination capability, Six-port radar features high range resolution and is therefore predestined for precise displacement and vibration measurements. In this paper, the influence of the antenna on both, accuracy and precision, of monostatic as well as bistatic Six-port radar systems will be studied.
- 1 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 300-303
Evaluation of the impact of antenna parameters on the performance of Six-port radar
The Six-port concept has been investigated in the last decades for numerous applications. Besides the use in network analyzers, communication transceivers and direction-of-arrival detectors the Six-port has also been applied in radar systems. Due to its excellent phase discrimination capability, Six-port radar features high range resolution and is therefore predestined for precise displacement and vibration measurements. In this paper, the influence of the antenna on both, accuracy and precision, of monostatic as well as bistatic Six-port radar systems will be studied.