Shuo Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shuo Zhang has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Xiaodong Zhang
Henan Polytechnic University
3 shared publications - Zhiming Wang
School of Energy Science and Engineering
3 shared publications - Xiaokai Xu
School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, China
2 shared publications - Binghui Li
The Frist Institute of Resources and Environment Investigation of Henan Province, Zhengzhou 450000, China
1 shared publication Caifang Wu
School of Mineral Resources and Geosciences, China University of Mining and Technology, Xuzhou, China
1 shared publicationDian Hao
Jiaozuo Coal Industry(Group)Co., Ltd
1 shared publication
Latest Publications
- Open Access
Experimental Investigation of Permeability Sensitivity of Coal Reservoir to Reservoir Pressure and Its Fluid–Solid Coupling Control Mechanism
During coalbed methane (CBM) production, coal reservoir pore/fracture structure varies dynamically under the action of fluid–solid coupling. And coal reservoir permeability changes accordingly. In order to factually investigate the dynamic changes in coal reservoir permeability in the CBM well drainage process, a comparative simulation experiment on the difference in coal permeability sensitivity to confining pressure (external pressure) and pore pressure (internal pressure) was carried out in this study. The results show that coal permeability presents a typical negative exponential decline with a decrease in pore pressure. The pore pressure sensitivity experiment can effectively simulate the permeability sensitivity characteristics caused by coal reservoir pressure. Based on the negative exponential function relationship between permeability and effective stress, a new calculating method for the effective stress coefficient was deduced. Namely, its value could be expressed as the quotient of the pore pressure sensitivity curve regression coefficient divided by the confining pressure sensitivity curve regression coefficient. A dynamic theoretical model for coal reservoir permeability characterized by reservoir pressure was systematically constructed based on the unique fluid (gas/liquid)–solid coupling characteristics of coal reservoirs. Furthermore, the general characteristics of the stress sensitivity of coal permeability during coalbed methane (CBM) recovery were analyzed. The dynamic evolution characteristics of coal reservoir permeability in the study area were further examined. Taking the production and drainage data of a typical actual CBM production well as an example, the theories regarding the permeability sensitivity of coal reservoirs to reservoir pressure presented in this paper were validated in practice. This indirectly confirmed the rationality and accuracy of the calculation method for the effective stress coefficient obtained through laboratory-based permeability sensitivity simulation experiments. This research provides robust theoretical support for the systematic monitoring and prediction of fluid production, reservoir pressure, and permeability during the CBM production process, carrying significant practical implications.
Open AccessExperimental Investigation of Permeability Sensitivity of Coal Reservoir to Reservoir Pressure and Its Fluid–Solid Coupling Control Mechanism
During coalbed methane (CBM) production, coal reservoir pore/fracture structure varies dynamically under the action of fluid–solid coupling. And coal reservoir permeability changes accordingly. In order to factually investigate the dynamic changes in coal reservoir permeability in the CBM well drainage process, a comparative simulation experiment on the difference in coal permeability sensitivity to confining pressure (external pressure) and pore pressure (internal pressure) was carried out in this study. The results show that coal permeability presents a typical negative exponential decline with a decrease in pore pressure. The pore pressure sensitivity experiment can effectively simulate the permeability sensitivity characteristics caused by coal reservoir pressure. Based on the negative exponential function relationship between permeability and effective stress, a new calculating method for the effective stress coefficient was deduced. Namely, its value could be expressed as the quotient of the pore pressure sensitivity curve regression coefficient divided by the confining pressure sensitivity curve regression coefficient. A dynamic theoretical model for coal reservoir permeability characterized by reservoir pressure was systematically constructed based on the unique fluid (gas/liquid)–solid coupling characteristics of coal reservoirs. Furthermore, the general characteristics of the stress sensitivity of coal permeability during coalbed methane (CBM) recovery were analyzed. The dynamic evolution characteristics of coal reservoir permeability in the study area were further examined. Taking the production and drainage data of a typical actual CBM production well as an example, the theories regarding the permeability sensitivity of coal reservoirs to reservoir pressure presented in this paper were validated in practice. This indirectly confirmed the rationality and accuracy of the calculation method for the effective stress coefficient obtained through laboratory-based permeability sensitivity simulation experiments. This research provides robust theoretical support for the systematic monitoring and prediction of fluid production, reservoir pressure, and permeability during the CBM production process, carrying significant practical implications.
- Open Access
- 9 February 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (7) , 11997-12008
Geochemical Characteristics of Coalbed Methane and Its Multifactor Control in High-Rank Coal Reservoirs, Southern Qinshui Basin, China
The investigation of the origin, occurrence, and migration mechanisms of coalbed methane (CBM) in high-rank coal reservoirs was reported in this study via a comprehensive analysis of CBM geochemical data from the Zhengzhuang and Fanzhuang blocks to establish the distribution pattern of methane carbon isotopes. Combined with reservoir information, geological characteristics, and hydrodynamic conditions, the CBM genesis and its control factors were elucidated and further quantitatively evaluated by gray correlation analysis. The results demonstrate that the carbon isotope ratio of methane (δ13C1 value) mainly varies between −57.80‰ and −27.35‰ with an average of −34.21‰, indicating that CBM is dominated by thermogenic gas in the study area. While the δ13C1 value is light at the center and heavy in the surroundings of the plane. When the maximum reflectance of vitrinite (R o,max) is between 3.00% and 4.50%, the δ13C1 value slightly decreases with an increase in thermal evolution degree. In addition, the δ13C1 value exhibits a positive correlation with vitrinite, gas content, coal thickness, and burial depth. Further, by means of the gray correlation analysis, the order of the influence of various factors on methane carbon isotopes is determined as follows: thermal evolution degree > vitrinite content > gas content > coal seam thickness > gas saturation > inert matter content > burial depth. Thus, the distinctive geochemical characteristics of high-rank coal reservoirs were formed via the synergistic effects of thermal evolution, macerals, and gas content. On the one hand, during high thermal evolution, massive micropores are generated to promote the partial retention of 12CH4 within the coal matrix, resulting in a relatively light trend in δ13C1. Meanwhile, a high vitrinite content implies the presence of excess aromatic macromolecular condensates to facilitate the occurrence of more 13CH4, thus appearing as a heavy δ13C1 value. On the other hand, considerable burial depth, complex geological structures, and strong hydrodynamic activity are highly prone to induce the fractionation effect of methane carbon isotopes, including diffusion, migration, water solubility, and secondary biogenic gas.
- 9 February 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (7) , 11997-12008
Open AccessGeochemical Characteristics of Coalbed Methane and Its Multifactor Control in High-Rank Coal Reservoirs, Southern Qinshui Basin, China
The investigation of the origin, occurrence, and migration mechanisms of coalbed methane (CBM) in high-rank coal reservoirs was reported in this study via a comprehensive analysis of CBM geochemical data from the Zhengzhuang and Fanzhuang blocks to establish the distribution pattern of methane carbon isotopes. Combined with reservoir information, geological characteristics, and hydrodynamic conditions, the CBM genesis and its control factors were elucidated and further quantitatively evaluated by gray correlation analysis. The results demonstrate that the carbon isotope ratio of methane (δ13C1 value) mainly varies between −57.80‰ and −27.35‰ with an average of −34.21‰, indicating that CBM is dominated by thermogenic gas in the study area. While the δ13C1 value is light at the center and heavy in the surroundings of the plane. When the maximum reflectance of vitrinite (R o,max) is between 3.00% and 4.50%, the δ13C1 value slightly decreases with an increase in thermal evolution degree. In addition, the δ13C1 value exhibits a positive correlation with vitrinite, gas content, coal thickness, and burial depth. Further, by means of the gray correlation analysis, the order of the influence of various factors on methane carbon isotopes is determined as follows: thermal evolution degree > vitrinite content > gas content > coal seam thickness > gas saturation > inert matter content > burial depth. Thus, the distinctive geochemical characteristics of high-rank coal reservoirs were formed via the synergistic effects of thermal evolution, macerals, and gas content. On the one hand, during high thermal evolution, massive micropores are generated to promote the partial retention of 12CH4 within the coal matrix, resulting in a relatively light trend in δ13C1. Meanwhile, a high vitrinite content implies the presence of excess aromatic macromolecular condensates to facilitate the occurrence of more 13CH4, thus appearing as a heavy δ13C1 value. On the other hand, considerable burial depth, complex geological structures, and strong hydrodynamic activity are highly prone to induce the fractionation effect of methane carbon isotopes, including diffusion, migration, water solubility, and secondary biogenic gas.
- Open Access
- 18 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Production characteristics and adsorption control mechanism of CO2-rich CBG wells
To investigate the productivity laws of coalbed gas (CBG) wells in carbon dioxide (CO2)-rich coalfield, the Haishiwan coal mine in Yaojie coalfield, Gansu Province, China, which is rich in CO2 of different concentrations in CBG, was selected as the study area. Using numerical simulation technology, the production capacity of CBG wells was simulated, and the thermodynamic factors influencing gas adsorption differences on production capacity were discussed. Numerical simulation indicates that with the increase of CO2 concentration, the gas breakthrough time is prolonged, and the gas production first increases and then decreases. Research considers that changes in CBG production capacity result from the combined effects of temperature and pressure on gas adsorption. At shallow coal seams, pressure is the dominant factor that promotes gas adsorption, resulting in increased gas content and production. However, due to the competitive adsorption of CO2 and methane (CH4), CO2 preferentially adsorbs on coal, hindering desorption. Therefore, gas breakthrough in CBG wells with high CO2 concentration is slower, but the production period is longer. On the contrary, high temperatures inhibit gas adsorption in deeper coal seams, reducing gas content and promoting CH4 desorption. Therefore, CBG wells with low CO2 concentration have faster gas breakthroughs, but overall production is lower. The findings of this study help to better understand the drainage characteristics of CO2-rich CBG wells and provide guidance for developing such resources.
- 18 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Open AccessProduction characteristics and adsorption control mechanism of CO2-rich CBG wells
To investigate the productivity laws of coalbed gas (CBG) wells in carbon dioxide (CO2)-rich coalfield, the Haishiwan coal mine in Yaojie coalfield, Gansu Province, China, which is rich in CO2 of different concentrations in CBG, was selected as the study area. Using numerical simulation technology, the production capacity of CBG wells was simulated, and the thermodynamic factors influencing gas adsorption differences on production capacity were discussed. Numerical simulation indicates that with the increase of CO2 concentration, the gas breakthrough time is prolonged, and the gas production first increases and then decreases. Research considers that changes in CBG production capacity result from the combined effects of temperature and pressure on gas adsorption. At shallow coal seams, pressure is the dominant factor that promotes gas adsorption, resulting in increased gas content and production. However, due to the competitive adsorption of CO2 and methane (CH4), CO2 preferentially adsorbs on coal, hindering desorption. Therefore, gas breakthrough in CBG wells with high CO2 concentration is slower, but the production period is longer. On the contrary, high temperatures inhibit gas adsorption in deeper coal seams, reducing gas content and promoting CH4 desorption. Therefore, CBG wells with low CO2 concentration have faster gas breakthroughs, but overall production is lower. The findings of this study help to better understand the drainage characteristics of CO2-rich CBG wells and provide guidance for developing such resources.
- 19 February 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (8) , 5419-5438
Thermodynamic Characteristics of CH4/CO2 Adsorption in Different Rank Coals and Its Molecular Mechanism
In order to investigate the essence of CH4/CO2 adsorption in coal for CO2-enhanced coalbed methane recovery (CO2-ECBM), this study established the coal structure models from the chemical composition and structure information on different rank coals to conduct CH4 and CO2 adsorption simulation under different environmental conditions. Thus, the differences and connections between integral heat and isosteric heat of CH4/CO2 adsorption in coal and its micro-mechanism were discussed. The results show that as the coal metamorphism degree deepens, the integral heat of CH4/CO2 adsorption, similar to adsorption capacity, presents a decreasing first and then increasing trend. While the adsorption equilibrium time of high-rank coal gives a significantly decreasing characteristic with pressure. Then, on the basis of adsorption simulation behavior, it finds that because complex functional groups exist in the coal macromolecular structure, the adsorption capacity shows a different characteristic compared with the experimental results; that is, it decreases with the coal metamorphism degree. Meanwhile, compared to CO2 adsorption, the isosteric heat of CH4 adsorption appears to have an obvious downward trend with increasing pressure and then gradually stabilizes. Further, there is always a clear linear relationship between CH4 adsorption capacity, and isosteric heat for aromatic pores in different rank coals. While for slit pores, both CH4 and CO2 molecules exhibit significant parabolic relationships between adsorption capacity and isosteric heat. In addition, on the one hand, except for the obvious chemical adsorption of low-rank coal in the high-pressure stage, affected by pore morphology and size, the isosteric heat of CH4 or CO2 adsorption manifests lower values in slit pores and large pore sizes. On the other hand, based on the adsorption systems of similar structural fragments with different functional groups, -OH has been identified as the functional group with the strongest adsorption effect on gas molecules and is also the main functional group causing CO2 chemical adsorption.
- 19 February 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (8) , 5419-5438
Thermodynamic Characteristics of CH4/CO2 Adsorption in Different Rank Coals and Its Molecular Mechanism
In order to investigate the essence of CH4/CO2 adsorption in coal for CO2-enhanced coalbed methane recovery (CO2-ECBM), this study established the coal structure models from the chemical composition and structure information on different rank coals to conduct CH4 and CO2 adsorption simulation under different environmental conditions. Thus, the differences and connections between integral heat and isosteric heat of CH4/CO2 adsorption in coal and its micro-mechanism were discussed. The results show that as the coal metamorphism degree deepens, the integral heat of CH4/CO2 adsorption, similar to adsorption capacity, presents a decreasing first and then increasing trend. While the adsorption equilibrium time of high-rank coal gives a significantly decreasing characteristic with pressure. Then, on the basis of adsorption simulation behavior, it finds that because complex functional groups exist in the coal macromolecular structure, the adsorption capacity shows a different characteristic compared with the experimental results; that is, it decreases with the coal metamorphism degree. Meanwhile, compared to CO2 adsorption, the isosteric heat of CH4 adsorption appears to have an obvious downward trend with increasing pressure and then gradually stabilizes. Further, there is always a clear linear relationship between CH4 adsorption capacity, and isosteric heat for aromatic pores in different rank coals. While for slit pores, both CH4 and CO2 molecules exhibit significant parabolic relationships between adsorption capacity and isosteric heat. In addition, on the one hand, except for the obvious chemical adsorption of low-rank coal in the high-pressure stage, affected by pore morphology and size, the isosteric heat of CH4 or CO2 adsorption manifests lower values in slit pores and large pore sizes. On the other hand, based on the adsorption systems of similar structural fragments with different functional groups, -OH has been identified as the functional group with the strongest adsorption effect on gas molecules and is also the main functional group causing CO2 chemical adsorption.
- Open Access
- 28 February 2024
- Published by MDPI AG in Fractal and Fractional
- Vol. 8 (3) , 141
Changes in Pore Structure and Fractal Characteristics of Solvents Pretreated High-Rank Coal under Supercritical CO2
CO2 injection in coal seams, which is a significant initiative to mitigate environmental problems caused by greenhouse gases, often leads a sequence of changes in the physical properties of coal reservoirs. To look into how the pore structure changes in the process of CO2 sequestration, we selected fresh coal from Huoerxinhe coal mine in China as the object. Then, acid treatment and SC-CO2 extraction were used to dissolve Organic and inorganic components in coal. Thus, by using SEM, LTGA-N2 apparatus and XRD, the characteristics of pore parameter and fractal dimension variation were discussed. The research results show that, the APS of samples THF, HCL-HF and Y-C increase, while the total PV decreases and the pore connectivity deteriorates. The pore connectivity of Samples THF and HCL-HF is improved (THF-C, HCL-HF-C), but the total pore volume continuously reduces. In addition, solvents treatment and SC-CO2 extraction mainly act on the microporous fraction. After solvents pretreatment, the changes in the pore size distribution curves are mainly manifested in the reduction of number of micropores, especially in the micropores around 3–4 nm. There is a small increase in micropores for samples Y-C and HCL-HF-C, with the pore size mainly concentrated around 4 nm, while the pores of the sample THF-C mainly show an increase within the scope of 3–16 nm. Generally, solvent pretreatment and SC-CO2 extraction help to simplify pore structure. However, the sample HCL-HF-C shows opposite change characteristics. In a short period of time, the larger pore fractal dimension, the less beneficial it is to the flow of CO2, while pore fractal dimension becomes progressively less useful in assessing pore connectivity with increasing time.
- 28 February 2024
- Published by MDPI AG in Fractal and Fractional
- Vol. 8 (3) , 141
Open AccessChanges in Pore Structure and Fractal Characteristics of Solvents Pretreated High-Rank Coal under Supercritical CO2
CO2 injection in coal seams, which is a significant initiative to mitigate environmental problems caused by greenhouse gases, often leads a sequence of changes in the physical properties of coal reservoirs. To look into how the pore structure changes in the process of CO2 sequestration, we selected fresh coal from Huoerxinhe coal mine in China as the object. Then, acid treatment and SC-CO2 extraction were used to dissolve Organic and inorganic components in coal. Thus, by using SEM, LTGA-N2 apparatus and XRD, the characteristics of pore parameter and fractal dimension variation were discussed. The research results show that, the APS of samples THF, HCL-HF and Y-C increase, while the total PV decreases and the pore connectivity deteriorates. The pore connectivity of Samples THF and HCL-HF is improved (THF-C, HCL-HF-C), but the total pore volume continuously reduces. In addition, solvents treatment and SC-CO2 extraction mainly act on the microporous fraction. After solvents pretreatment, the changes in the pore size distribution curves are mainly manifested in the reduction of number of micropores, especially in the micropores around 3–4 nm. There is a small increase in micropores for samples Y-C and HCL-HF-C, with the pore size mainly concentrated around 4 nm, while the pores of the sample THF-C mainly show an increase within the scope of 3–16 nm. Generally, solvent pretreatment and SC-CO2 extraction help to simplify pore structure. However, the sample HCL-HF-C shows opposite change characteristics. In a short period of time, the larger pore fractal dimension, the less beneficial it is to the flow of CO2, while pore fractal dimension becomes progressively less useful in assessing pore connectivity with increasing time.
- Open Access
- 12 February 2020
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 38 (1-2) , 3-23
Multi-factor controls on initial gas production pressure of coalbed methane wells in Changzhi-Anze block, Central-Southern of Qinshui Basin, China
Adsorption and desorption of coalbed methane are generally at a dynamic equilibrium state under the undisturbed coal reservoir. However, as the reservoir pressure drops to a certain value during the extraction of coalbed methane, the equilibrium state is destroyed and thus more coalbed methane desorbs and escapes from coal to wellbore. Here the corresponding bottom-hole fluid pressure is called initial gas production pressure (IGPP) in the development practice of coalbed methane wells. This paper, which has taken Changzhi-Anze block in the central-southern part of Qinshui basin as the study object, addresses the distribution characteristic and control factors of IGPP of coalbed methane wells and then explores the key factors affecting IGPP using grey correlation analysis theory. The results indicate that IGPP varies from 1.09 MPa to 6.57 MPa, showing a distribution law with high in the middle and low in the west and east of the study area, which presents a similar distribution characteristic with burial depth, thickness, coal rank, gas content, original reservoir pressure, and in-situ stress. Further, through grey correlation analysis, it concludes that the correlation degrees of control factors affecting IGPP of coalbed methane wells in the descending order are decline rate of working fluid level, water yield before gas production, reservoir pressure, coal thickness, coal rank, minimum horizontal principal stress, burial depth, and gas content. Among these factors, engineering factors, including decline rate of working fluid level and water yield before gas production, present a key controlling effect, because they can determine the smooth migration pathway directly during initial water production. And another key factor, original reservoir pressure also builds strong and positive correlation with IGPP under the interaction of other geology and reservoir factors, revealing the capability of gas desorption and the transmission of pressure drops.
- 12 February 2020
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 38 (1-2) , 3-23
Open AccessMulti-factor controls on initial gas production pressure of coalbed methane wells in Changzhi-Anze block, Central-Southern of Qinshui Basin, China
Adsorption and desorption of coalbed methane are generally at a dynamic equilibrium state under the undisturbed coal reservoir. However, as the reservoir pressure drops to a certain value during the extraction of coalbed methane, the equilibrium state is destroyed and thus more coalbed methane desorbs and escapes from coal to wellbore. Here the corresponding bottom-hole fluid pressure is called initial gas production pressure (IGPP) in the development practice of coalbed methane wells. This paper, which has taken Changzhi-Anze block in the central-southern part of Qinshui basin as the study object, addresses the distribution characteristic and control factors of IGPP of coalbed methane wells and then explores the key factors affecting IGPP using grey correlation analysis theory. The results indicate that IGPP varies from 1.09 MPa to 6.57 MPa, showing a distribution law with high in the middle and low in the west and east of the study area, which presents a similar distribution characteristic with burial depth, thickness, coal rank, gas content, original reservoir pressure, and in-situ stress. Further, through grey correlation analysis, it concludes that the correlation degrees of control factors affecting IGPP of coalbed methane wells in the descending order are decline rate of working fluid level, water yield before gas production, reservoir pressure, coal thickness, coal rank, minimum horizontal principal stress, burial depth, and gas content. Among these factors, engineering factors, including decline rate of working fluid level and water yield before gas production, present a key controlling effect, because they can determine the smooth migration pathway directly during initial water production. And another key factor, original reservoir pressure also builds strong and positive correlation with IGPP under the interaction of other geology and reservoir factors, revealing the capability of gas desorption and the transmission of pressure drops.
- Open Access
- 29 March 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (18) , 9993-10003
Effect of sodium silicate on Portland cement/calcium aluminate cement/gypsum rich-water system: strength and microstructure
In this investigation, sodium silicate (SS) was mixed into rich-water (RW) materials consisting of Portland cement, calcium aluminate cement and gypsum for improved mechanical properties. The RW materials containing different amounts of SS were characterized by the compression test, mercury intrusion porosity, scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. The results demonstrated that with the increase of SS additions, the early strength of the RW materials increases, and the long-term strength retrogression of the RW materials can be inhibited when the SS content is above 3%. Pore structures of the RW materials are improved significantly due to the filling effect of the calcium silicate hydration (C–S–H) gel from a reaction between silicate ions and Ca(OH)2, thus increasing the early strength of the RW materials. For the RW materials containing SS and cured for 0 to 14 days, there are more hexagonal hydrates including CaO·Al2O3·10H2O (CAH10) and 2CaO·Al2O3·8H2O (C2AH8), more C–S–H gel and less ettringite crystals, which is of benefit to the strength of the material. The strength retrogression can be attributed to phase conversions from hexagonal hydrates (CAH10 and C2AH8) to cubic ones (3CaO·Al2O3·6H2O) with lower intercrystal bonding forces. Furthermore, this phase conversion is inhibited effectively by the chemical reaction of silicate ions and CAH10 (or C2AH8), improving the long-term strength of the RW materials.
- 29 March 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (18) , 9993-10003
Open AccessEffect of sodium silicate on Portland cement/calcium aluminate cement/gypsum rich-water system: strength and microstructure
In this investigation, sodium silicate (SS) was mixed into rich-water (RW) materials consisting of Portland cement, calcium aluminate cement and gypsum for improved mechanical properties. The RW materials containing different amounts of SS were characterized by the compression test, mercury intrusion porosity, scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. The results demonstrated that with the increase of SS additions, the early strength of the RW materials increases, and the long-term strength retrogression of the RW materials can be inhibited when the SS content is above 3%. Pore structures of the RW materials are improved significantly due to the filling effect of the calcium silicate hydration (C–S–H) gel from a reaction between silicate ions and Ca(OH)2, thus increasing the early strength of the RW materials. For the RW materials containing SS and cured for 0 to 14 days, there are more hexagonal hydrates including CaO·Al2O3·10H2O (CAH10) and 2CaO·Al2O3·8H2O (C2AH8), more C–S–H gel and less ettringite crystals, which is of benefit to the strength of the material. The strength retrogression can be attributed to phase conversions from hexagonal hydrates (CAH10 and C2AH8) to cubic ones (3CaO·Al2O3·6H2O) with lower intercrystal bonding forces. Furthermore, this phase conversion is inhibited effectively by the chemical reaction of silicate ions and CAH10 (or C2AH8), improving the long-term strength of the RW materials.