ZWZhiming Wang

Zhiming Wang

*This is an algorithmically generated author record based on publicly available information.

Zhiming Wang has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Geochemical Characteristics of Coalbed Methane and Its Multifactor Control in High-Rank Coal Reservoirs, Southern Qinshui Basin, China

    by Fuxing Wu, Shuo Zhang, Xiaodong Zhang, Pengpeng Li, Xiaokai Xu, Songtao Ji, Zhiming Wang, Dian Hao, Jie Guo, Xiongfei Bi

    The investigation of the origin, occurrence, and migration mechanisms of coalbed methane (CBM) in high-rank coal reservoirs was reported in this study via a comprehensive analysis of CBM geochemical data from the Zhengzhuang and Fanzhuang blocks to establish the distribution pattern of methane carbon isotopes. Combined with reservoir information, geological characteristics, and hydrodynamic conditions, the CBM genesis and its control factors were elucidated and further quantitatively evaluated by gray correlation analysis. The results demonstrate that the carbon isotope ratio of methane (δ13C1 value) mainly varies between −57.80‰ and −27.35‰ with an average of −34.21‰, indicating that CBM is dominated by thermogenic gas in the study area. While the δ13C1 value is light at the center and heavy in the surroundings of the plane. When the maximum reflectance of vitrinite (R o,max) is between 3.00% and 4.50%, the δ13C1 value slightly decreases with an increase in thermal evolution degree. In addition, the δ13C1 value exhibits a positive correlation with vitrinite, gas content, coal thickness, and burial depth. Further, by means of the gray correlation analysis, the order of the influence of various factors on methane carbon isotopes is determined as follows: thermal evolution degree > vitrinite content > gas content > coal seam thickness > gas saturation > inert matter content > burial depth. Thus, the distinctive geochemical characteristics of high-rank coal reservoirs were formed via the synergistic effects of thermal evolution, macerals, and gas content. On the one hand, during high thermal evolution, massive micropores are generated to promote the partial retention of 12CH4 within the coal matrix, resulting in a relatively light trend in δ13C1. Meanwhile, a high vitrinite content implies the presence of excess aromatic macromolecular condensates to facilitate the occurrence of more 13CH4, thus appearing as a heavy δ13C1 value. On the other hand, considerable burial depth, complex geological structures, and strong hydrodynamic activity are highly prone to induce the fractionation effect of methane carbon isotopes, including diffusion, migration, water solubility, and secondary biogenic gas.

  • Thermodynamic Characteristics of CH4/CO2 Adsorption in Different Rank Coals and Its Molecular Mechanism

    by Zhiming Wang, Shuo Zhang, Xiaodong Zhang, Jianwei Cheng, Weiyong Lu, Erhu Bai, Zhenjiang You

    In order to investigate the essence of CH4/CO2 adsorption in coal for CO2-enhanced coalbed methane recovery (CO2-ECBM), this study established the coal structure models from the chemical composition and structure information on different rank coals to conduct CH4 and CO2 adsorption simulation under different environmental conditions. Thus, the differences and connections between integral heat and isosteric heat of CH4/CO2 adsorption in coal and its micro-mechanism were discussed. The results show that as the coal metamorphism degree deepens, the integral heat of CH4/CO2 adsorption, similar to adsorption capacity, presents a decreasing first and then increasing trend. While the adsorption equilibrium time of high-rank coal gives a significantly decreasing characteristic with pressure. Then, on the basis of adsorption simulation behavior, it finds that because complex functional groups exist in the coal macromolecular structure, the adsorption capacity shows a different characteristic compared with the experimental results; that is, it decreases with the coal metamorphism degree. Meanwhile, compared to CO2 adsorption, the isosteric heat of CH4 adsorption appears to have an obvious downward trend with increasing pressure and then gradually stabilizes. Further, there is always a clear linear relationship between CH4 adsorption capacity, and isosteric heat for aromatic pores in different rank coals. While for slit pores, both CH4 and CO2 molecules exhibit significant parabolic relationships between adsorption capacity and isosteric heat. In addition, on the one hand, except for the obvious chemical adsorption of low-rank coal in the high-pressure stage, affected by pore morphology and size, the isosteric heat of CH4 or CO2 adsorption manifests lower values in slit pores and large pore sizes. On the other hand, based on the adsorption systems of similar structural fragments with different functional groups, -OH has been identified as the functional group with the strongest adsorption effect on gas molecules and is also the main functional group causing CO2 chemical adsorption.


  • Open Access

    Evolution of Acoustic Emission and Microcrack in Jointed Coal under Loading and Their Correlations

    by Zhiming Wang, Kun Guan, Zhenhua Li, Yu-Ning Sun, Hankun Feng

    Understanding of continuous damage and cracking process of compressed jointed coal is critical to predict its stability. Herein, for jointed coal under uniaxial compression with bedding planes perpendicular (sample A) and parallel (sample B) to the loading direction, an acoustic emission (AE) monitoring device and a computed tomography (CT) scanner were employed to study the damage and cracking process. Furthermore, the correlations between the AE signals and internal fracture parameters were analyzed. Results show that (1) shear and tension cracks are respectively main damage forms in samples A and B; (2) there is a drop valley of variations of AE count fractal dimension (D-1) over time before the stress peak, and compared with sample B, the drop valley for sample A are much wider; (3) many fractures between joint planes formed at yielding and postpeak stages, fracture fractal dimensions (D-2) first increase slightly with loading and then increase significantly at yielding and postpeak stages; especially D-2 of sample A is larger than that of sample B; (4) the accumulative value of D-1 (AD(1)) increases with D-2 monotonously, and an expression of porosity or connectivity of the compressed jointed coal was developed, by which the porosity and connectivity of jointed coal could be calculated. The study outcomes could contribute to predict coal stability and the variations of water and gas flowing channels in seam in underground coal mines.


  • Open Access

    Effect of sodium silicate on Portland cement/calcium aluminate cement/gypsum rich-water system: strength and microstructure

    by Zhiming Wang, Yuning Sun, Shuo Zhang, Yonglong Wang

    In this investigation, sodium silicate (SS) was mixed into rich-water (RW) materials consisting of Portland cement, calcium aluminate cement and gypsum for improved mechanical properties. The RW materials containing different amounts of SS were characterized by the compression test, mercury intrusion porosity, scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. The results demonstrated that with the increase of SS additions, the early strength of the RW materials increases, and the long-term strength retrogression of the RW materials can be inhibited when the SS content is above 3%. Pore structures of the RW materials are improved significantly due to the filling effect of the calcium silicate hydration (C–S–H) gel from a reaction between silicate ions and Ca(OH)2, thus increasing the early strength of the RW materials. For the RW materials containing SS and cured for 0 to 14 days, there are more hexagonal hydrates including CaO·Al2O3·10H2O (CAH10) and 2CaO·Al2O3·8H2O (C2AH8), more C–S–H gel and less ettringite crystals, which is of benefit to the strength of the material. The strength retrogression can be attributed to phase conversions from hexagonal hydrates (CAH10 and C2AH8) to cubic ones (3CaO·Al2O3·6H2O) with lower intercrystal bonding forces. Furthermore, this phase conversion is inhibited effectively by the chemical reaction of silicate ions and CAH10 (or C2AH8), improving the long-term strength of the RW materials.