Xiaoran Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoran Zhang has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
Ziyang Zhang
15 shared publications- Ziyang Zhang
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
13 shared publications Chaohong Tan
10 shared publicationsHaiyan Li
10 shared publications- Haiyan Li
Beijing University of Civil Engineering and Architecture
10 shared publications Junfeng Liu
9 shared publications
Latest Publications
- Open Access
- 2 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5599
Long-Term Assessment of Heavy Metal Removal Efficiency and Ecological Risk of Permeable Brick Pavement Systems with Modified Cushion Fillers
As a widely used sponge facility, the permeable pavement system (PPS) frequently exhibited a decline in pollutant removal after long-term operation. However, the long-term impacts of different cushion fillers on pollutant removal and ecological risk remain unclear. This study modified a conventional sand-based PPS (S1) by replacing the cushion layer with five materials: construction waste bricks (S2), coal gangue (S3), activated carbon (S4), carbon nanotubes (S5), and graphene (S6). A 5-year laboratory experiment evaluated the removal efficiency, fraction distribution, and ecological risk of heavy metals (HMs: Mn, Pb, Zn, Cu, Cd, Ni) from rainfall. The key findings demonstrated significant variations among fillers. S2 showed the poorest performance with a removal efficiency of 83.26% ± 13.02 across all HMs, whereas carbonaceous-modified systems (S4–S6) exhibited high removal efficiencies, exceeding 97.00% ± 1.89. Residual and Fe/Mn oxide states were predominant among the HMs, exceeding 43.69%, indicating enhanced metal immobilization. The ecological risks of carbon nanotubes and graphene were the highest, with risk indices of 1123.02 and 1129.63, respectively. These findings demonstrated that carbonaceous fillers achieved superior HM sequestration, leading to an overall reduction in ecological risk in the effluent of PPS after long-term operation. Overall, this study provided new perspectives on elucidating long-term removal efficiency and the ecological risk mitigation of PPS, and supported future application of carbonaceous fillers in sustainable PPS design and construction.
- 2 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5599
Open AccessLong-Term Assessment of Heavy Metal Removal Efficiency and Ecological Risk of Permeable Brick Pavement Systems with Modified Cushion Fillers
As a widely used sponge facility, the permeable pavement system (PPS) frequently exhibited a decline in pollutant removal after long-term operation. However, the long-term impacts of different cushion fillers on pollutant removal and ecological risk remain unclear. This study modified a conventional sand-based PPS (S1) by replacing the cushion layer with five materials: construction waste bricks (S2), coal gangue (S3), activated carbon (S4), carbon nanotubes (S5), and graphene (S6). A 5-year laboratory experiment evaluated the removal efficiency, fraction distribution, and ecological risk of heavy metals (HMs: Mn, Pb, Zn, Cu, Cd, Ni) from rainfall. The key findings demonstrated significant variations among fillers. S2 showed the poorest performance with a removal efficiency of 83.26% ± 13.02 across all HMs, whereas carbonaceous-modified systems (S4–S6) exhibited high removal efficiencies, exceeding 97.00% ± 1.89. Residual and Fe/Mn oxide states were predominant among the HMs, exceeding 43.69%, indicating enhanced metal immobilization. The ecological risks of carbon nanotubes and graphene were the highest, with risk indices of 1123.02 and 1129.63, respectively. These findings demonstrated that carbonaceous fillers achieved superior HM sequestration, leading to an overall reduction in ecological risk in the effluent of PPS after long-term operation. Overall, this study provided new perspectives on elucidating long-term removal efficiency and the ecological risk mitigation of PPS, and supported future application of carbonaceous fillers in sustainable PPS design and construction.
- Open Access
- 14 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (10) , 4917
A Comprehensive Multi-Criteria Evaluation System for Deicer Assessment: Framework Development and Validation
The pursuit of sustainable winter road maintenance has intensified the need for deicers that balance functional effectiveness, economic viability, and minimal environmental impact. However, the absence of a systematic, multi-dimensional evaluation framework has hindered informed product selection and green procurement. This study develops and validates the Comprehensive Deicer Multi-criteria Evaluation System (CDMES)—a structured assessment framework that integrates economic, functional, environmental, and infrastructural sustainability dimensions. The evaluation index system was constructed for deicers, consisting of 18 indicators including preparation cost, engineering maintenance cost, operability of agent preparation, application difficulty, asphalt binder adhesion loss, minimum application concentration, proportion of active ingredients, effective time, ambient temperature, freezing point, solid dissolution rate, relative snow/ice-melting capacity, seed damage rate, chlorophyll attenuation, soil pH, aqueous solution pH, steel–carbon corrosion rate, and pavement friction attenuation rate. Subsequently, the analytic hierarchy process (AHP) was employed to determine the weight of each indicator, and evaluation criteria were established in accordance with relevant standards and literature. Finally, this weight determination method, combined with the simple additive weighting (SAW) method for index aggregation, forms a quantitative evaluation model. These elements together constitute a comprehensive deicer evaluation system, designated as the Comprehensive Deicer Multi-criteria Evaluation System (CDMES). Validation using three representative deicers—sodium chloride, a composite chloride-based formulation, and an organic acetate-based product—demonstrated that the CDMES can effectively discriminate product performance across multiple sustainability dimensions and identify critical weaknesses that may be obscured by purely compensatory scoring. The framework offers a transparent and reproducible decision-support tool for winter maintenance managers seeking to align deicer selection with sustainability objectives.
- 14 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (10) , 4917
Open AccessA Comprehensive Multi-Criteria Evaluation System for Deicer Assessment: Framework Development and Validation
The pursuit of sustainable winter road maintenance has intensified the need for deicers that balance functional effectiveness, economic viability, and minimal environmental impact. However, the absence of a systematic, multi-dimensional evaluation framework has hindered informed product selection and green procurement. This study develops and validates the Comprehensive Deicer Multi-criteria Evaluation System (CDMES)—a structured assessment framework that integrates economic, functional, environmental, and infrastructural sustainability dimensions. The evaluation index system was constructed for deicers, consisting of 18 indicators including preparation cost, engineering maintenance cost, operability of agent preparation, application difficulty, asphalt binder adhesion loss, minimum application concentration, proportion of active ingredients, effective time, ambient temperature, freezing point, solid dissolution rate, relative snow/ice-melting capacity, seed damage rate, chlorophyll attenuation, soil pH, aqueous solution pH, steel–carbon corrosion rate, and pavement friction attenuation rate. Subsequently, the analytic hierarchy process (AHP) was employed to determine the weight of each indicator, and evaluation criteria were established in accordance with relevant standards and literature. Finally, this weight determination method, combined with the simple additive weighting (SAW) method for index aggregation, forms a quantitative evaluation model. These elements together constitute a comprehensive deicer evaluation system, designated as the Comprehensive Deicer Multi-criteria Evaluation System (CDMES). Validation using three representative deicers—sodium chloride, a composite chloride-based formulation, and an organic acetate-based product—demonstrated that the CDMES can effectively discriminate product performance across multiple sustainability dimensions and identify critical weaknesses that may be obscured by purely compensatory scoring. The framework offers a transparent and reproducible decision-support tool for winter maintenance managers seeking to align deicer selection with sustainability objectives.
- Open Access
- 5 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (9) , 4544
Water Quality Assessment and Pollution Control of Urban Road Stormwater Runoff in Arid Regions: A Case Study of Yinchuan, China
To further investigate stormwater runoff patterns, pathogenic risks of pollutants on urban roads, and mitigation of urban non-point source pollution, road runoff monitoring and sampling were conducted in selected sections of central Yinchuan, a city in the arid region of northwestern China. Processed data—including rainfall, flow rate, and water quality parameters (conventional five indicators and heavy metals)—were obtained from ten rainfall events in 2024. Through analyses of water quality characteristics, influencing factors, runoff flushing patterns, and stormwater control measures, the current status of road runoff pollution was clarified. The Nemerow pollution index method was applied to evaluate pollutant levels and assess human health risks. Results indicate that pollution levels in Yinchuan are relatively mild, with most pollutant concentrations below the Class IV surface water quality standard. Basic rainfall parameters—peak rainfall intensity (PRI), average rainfall intensity (ARI), and previous sunny days (PSD)—together with urban functional zones, significantly influence pollutants in rainfall runoff, with the antecedent dry period showing the most pronounced effect. Analysis of the runoff scouring effect reveals that scouring of the conventional five water quality indicators (SS, COD, TN, NH3-N, and TP) is substantially more evident than that of heavy metals. The runoff control depth for roads in central Yinchuan ranges from 0.9 mm to 40 mm, sufficient to manage runoff pollution from small to medium-sized rainfall events. The Nemerow pollution index remains below 8.36, with no severely polluted areas identified, indicating relatively low pollution in Yinchuan’s urban core. Quantitative human health risk assessment suggests that health risks associated with heavy metals on roads are low, with no significant exposure risk, implying that stormwater runoff in Yinchuan poses no substantial threat to human health. This study provides a valuable reference for non-point source pollution control via stormwater runoff management in arid-region cities.
- 5 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (9) , 4544
Open AccessWater Quality Assessment and Pollution Control of Urban Road Stormwater Runoff in Arid Regions: A Case Study of Yinchuan, China
To further investigate stormwater runoff patterns, pathogenic risks of pollutants on urban roads, and mitigation of urban non-point source pollution, road runoff monitoring and sampling were conducted in selected sections of central Yinchuan, a city in the arid region of northwestern China. Processed data—including rainfall, flow rate, and water quality parameters (conventional five indicators and heavy metals)—were obtained from ten rainfall events in 2024. Through analyses of water quality characteristics, influencing factors, runoff flushing patterns, and stormwater control measures, the current status of road runoff pollution was clarified. The Nemerow pollution index method was applied to evaluate pollutant levels and assess human health risks. Results indicate that pollution levels in Yinchuan are relatively mild, with most pollutant concentrations below the Class IV surface water quality standard. Basic rainfall parameters—peak rainfall intensity (PRI), average rainfall intensity (ARI), and previous sunny days (PSD)—together with urban functional zones, significantly influence pollutants in rainfall runoff, with the antecedent dry period showing the most pronounced effect. Analysis of the runoff scouring effect reveals that scouring of the conventional five water quality indicators (SS, COD, TN, NH3-N, and TP) is substantially more evident than that of heavy metals. The runoff control depth for roads in central Yinchuan ranges from 0.9 mm to 40 mm, sufficient to manage runoff pollution from small to medium-sized rainfall events. The Nemerow pollution index remains below 8.36, with no severely polluted areas identified, indicating relatively low pollution in Yinchuan’s urban core. Quantitative human health risk assessment suggests that health risks associated with heavy metals on roads are low, with no significant exposure risk, implying that stormwater runoff in Yinchuan poses no substantial threat to human health. This study provides a valuable reference for non-point source pollution control via stormwater runoff management in arid-region cities.
- 24 April 2025
- Published by Elsevier in Process Safety and Environmental Protection
- Vol. 198
Microplastics in road sediment of typical urban districts of Beijing: Characteristics and risk assessment
- 24 April 2025
- Published by Elsevier in Process Safety and Environmental Protection
- Vol. 198
Microplastics in road sediment of typical urban districts of Beijing: Characteristics and risk assessment
- 22 February 2025
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 47 (3) , 1-21
Occurrence, ecological risk of microplastics in campus athletic fields runoff and their adsorption behavior towards heavy metals
The occurrence of microplastics in athletic fields and their risk of ecological pollution have attracted widespread attention. The abundance, particle size
- 22 February 2025
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 47 (3) , 1-21
Occurrence, ecological risk of microplastics in campus athletic fields runoff and their adsorption behavior towards heavy metals
The occurrence of microplastics in athletic fields and their risk of ecological pollution have attracted widespread attention. The abundance, particle size
- Open Access
Removal Efficiency and Mechanism of Typical PPCPs onto Novel Cyclodextrin–Graphene Oxide Composite Adsorbent in Aqueous Solutions
A novel β-cyclodextrin–graphene oxide (β-CD/GO) composite adsorbent was synthesized via a hydrothermal method. Removal efficiency and mechanisms of typical pharmaceutical and personal care products (PPCPs) by the β-CD/GO composite were investigated in aqueous solutions. The results demonstrated that the β-CD/GO composite was successfully formed through cross-linking between β-CD and GO nanosheets, exhibiting enriched hydroxyl groups, a porous layered structure, and good thermal stability. The adsorption of cimetidine (CTD), sulfamethazine (SMZ), and diclofenac (DCF) onto the β-CD/GO composite was well described by pseudo-first-order and pseudo-second-order kinetic models, and Langmuir isotherm. The maximum adsorption capacities of CTD, SMZ, and DCF onto the β-CD/GO composite were 58.86, 35.62, and 29.11 mg g−1 at 298 K, respectively. The adsorption process was rapid and reached equilibrium after 6 h. The adsorption followed a monolayer mechanism and was an exothermic process. The adsorption capacity decreased with increasing pH values and ion concentrations. The β-CD/GO composite exhibited maximum adsorption capacities of 17.69, 16.96, and 16.23 mg g−1 for CTD, SMZ, and DCF, respectively, under a pH of 4 with a dosage of 1.0 g/L at 298 K for 6 h. Due to the combined impacts of electrostatic interaction, hydrogen bonding, and host–guest interaction, the adsorption of PPCPs onto β-CD/GO composite was fast and efficient. β-CD/GO composite exhibited superior adsorption efficacy and structural stability, which highlighted its promising application in the elimination of micropollutants from aqueous solutions.
Open AccessRemoval Efficiency and Mechanism of Typical PPCPs onto Novel Cyclodextrin–Graphene Oxide Composite Adsorbent in Aqueous Solutions
A novel β-cyclodextrin–graphene oxide (β-CD/GO) composite adsorbent was synthesized via a hydrothermal method. Removal efficiency and mechanisms of typical pharmaceutical and personal care products (PPCPs) by the β-CD/GO composite were investigated in aqueous solutions. The results demonstrated that the β-CD/GO composite was successfully formed through cross-linking between β-CD and GO nanosheets, exhibiting enriched hydroxyl groups, a porous layered structure, and good thermal stability. The adsorption of cimetidine (CTD), sulfamethazine (SMZ), and diclofenac (DCF) onto the β-CD/GO composite was well described by pseudo-first-order and pseudo-second-order kinetic models, and Langmuir isotherm. The maximum adsorption capacities of CTD, SMZ, and DCF onto the β-CD/GO composite were 58.86, 35.62, and 29.11 mg g−1 at 298 K, respectively. The adsorption process was rapid and reached equilibrium after 6 h. The adsorption followed a monolayer mechanism and was an exothermic process. The adsorption capacity decreased with increasing pH values and ion concentrations. The β-CD/GO composite exhibited maximum adsorption capacities of 17.69, 16.96, and 16.23 mg g−1 for CTD, SMZ, and DCF, respectively, under a pH of 4 with a dosage of 1.0 g/L at 298 K for 6 h. Due to the combined impacts of electrostatic interaction, hydrogen bonding, and host–guest interaction, the adsorption of PPCPs onto β-CD/GO composite was fast and efficient. β-CD/GO composite exhibited superior adsorption efficacy and structural stability, which highlighted its promising application in the elimination of micropollutants from aqueous solutions.
- 30 August 2024
- Published by Taylor & Francis in Soil and Sediment Contamination: An International Journal
- Vol. 34 (6) , 1003-1022
Distribution and Risk Assessment of VOCs in Road Dust Across Different Urban Areas
- 30 August 2024
- Published by Taylor & Francis in Soil and Sediment Contamination: An International Journal
- Vol. 34 (6) , 1003-1022
Distribution and Risk Assessment of VOCs in Road Dust Across Different Urban Areas
- Open Access
- 6 February 2024
- Published by IWA Publishing in Water Science & Technology
- Vol. 89 (4) , 945-961
Occurrence and ecological risk of PAHs in urban road runoff in Beijing
The occurrence and ecological risks of 16 polycyclic aromatic hydrocarbons (PAHs) in different types of urban road runoff in Beijing during two typical rainfall events were studied. The average concentration of PAHs in road runoff particulate was in the order of Guanyuanqiao Road (ring road, 15,175 ng/L) > Huayuanqiao Road (primary road, 4,792 ng/L) > Dongcheng Alley (alley, 4,774 ng/L) > Nansihuan Viaduct (viaduct, 770 ng/L), much higher than dissolved PAHs. The total concentration of ∑16PAHs decreased with runoff scouring. Rainfall conditions and the accumulation of PAHs in the early rainfall period show a significant impact on PAHs pollution. The event mean concentration range of PAHs is 674–21,596 ng/L, following in the order of ring road > primary road > alley > viaduct. The proportion of four-ring PAHs was the highest. The first flush effect of PAHs is found in both rainfall events, and the effect of different ring PAHs is relatively similar. The content of PAHs is positively correlated with the amount of total organic carbon and suspended substance in runoff (r2> 0.72). The ecological risk assessment indicated that PAHs in road runoff except viaduct road corresponded to high risk.
- 6 February 2024
- Published by IWA Publishing in Water Science & Technology
- Vol. 89 (4) , 945-961
Open AccessOccurrence and ecological risk of PAHs in urban road runoff in Beijing
The occurrence and ecological risks of 16 polycyclic aromatic hydrocarbons (PAHs) in different types of urban road runoff in Beijing during two typical rainfall events were studied. The average concentration of PAHs in road runoff particulate was in the order of Guanyuanqiao Road (ring road, 15,175 ng/L) > Huayuanqiao Road (primary road, 4,792 ng/L) > Dongcheng Alley (alley, 4,774 ng/L) > Nansihuan Viaduct (viaduct, 770 ng/L), much higher than dissolved PAHs. The total concentration of ∑16PAHs decreased with runoff scouring. Rainfall conditions and the accumulation of PAHs in the early rainfall period show a significant impact on PAHs pollution. The event mean concentration range of PAHs is 674–21,596 ng/L, following in the order of ring road > primary road > alley > viaduct. The proportion of four-ring PAHs was the highest. The first flush effect of PAHs is found in both rainfall events, and the effect of different ring PAHs is relatively similar. The content of PAHs is positively correlated with the amount of total organic carbon and suspended substance in runoff (r2> 0.72). The ecological risk assessment indicated that PAHs in road runoff except viaduct road corresponded to high risk.