Ziyang Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ziyang Zhang has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoran Zhang
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
13 shared publications - Haiyan Li
Beijing University of Civil Engineering and Architecture
10 shared publications Chaohong Tan
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing, P. R. China
7 shared publications- Hongrui Chen
CRRC Environmental Science & Technology Cooperation, Beijing 100067, China
7 shared publications Xiaoran Zhang
Beijing Energy Conservation & Sustainable Urban and Rural Development Provincial and Ministry Co-Construction Collaboration Innovation Center, Beijing, China
7 shared publications- Chaohong Tan
Beijing Engineering Research Center of Sustainable Urban Sewage System Construction and Risk Control, Beijing University of Civil Engineering and Architecture, Beijing 100044, China
6 shared publications
Latest Publications
- Open Access
- 2 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5599
Long-Term Assessment of Heavy Metal Removal Efficiency and Ecological Risk of Permeable Brick Pavement Systems with Modified Cushion Fillers
As a widely used sponge facility, the permeable pavement system (PPS) frequently exhibited a decline in pollutant removal after long-term operation. However, the long-term impacts of different cushion fillers on pollutant removal and ecological risk remain unclear. This study modified a conventional sand-based PPS (S1) by replacing the cushion layer with five materials: construction waste bricks (S2), coal gangue (S3), activated carbon (S4), carbon nanotubes (S5), and graphene (S6). A 5-year laboratory experiment evaluated the removal efficiency, fraction distribution, and ecological risk of heavy metals (HMs: Mn, Pb, Zn, Cu, Cd, Ni) from rainfall. The key findings demonstrated significant variations among fillers. S2 showed the poorest performance with a removal efficiency of 83.26% ± 13.02 across all HMs, whereas carbonaceous-modified systems (S4–S6) exhibited high removal efficiencies, exceeding 97.00% ± 1.89. Residual and Fe/Mn oxide states were predominant among the HMs, exceeding 43.69%, indicating enhanced metal immobilization. The ecological risks of carbon nanotubes and graphene were the highest, with risk indices of 1123.02 and 1129.63, respectively. These findings demonstrated that carbonaceous fillers achieved superior HM sequestration, leading to an overall reduction in ecological risk in the effluent of PPS after long-term operation. Overall, this study provided new perspectives on elucidating long-term removal efficiency and the ecological risk mitigation of PPS, and supported future application of carbonaceous fillers in sustainable PPS design and construction.
- 2 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5599
Open AccessLong-Term Assessment of Heavy Metal Removal Efficiency and Ecological Risk of Permeable Brick Pavement Systems with Modified Cushion Fillers
As a widely used sponge facility, the permeable pavement system (PPS) frequently exhibited a decline in pollutant removal after long-term operation. However, the long-term impacts of different cushion fillers on pollutant removal and ecological risk remain unclear. This study modified a conventional sand-based PPS (S1) by replacing the cushion layer with five materials: construction waste bricks (S2), coal gangue (S3), activated carbon (S4), carbon nanotubes (S5), and graphene (S6). A 5-year laboratory experiment evaluated the removal efficiency, fraction distribution, and ecological risk of heavy metals (HMs: Mn, Pb, Zn, Cu, Cd, Ni) from rainfall. The key findings demonstrated significant variations among fillers. S2 showed the poorest performance with a removal efficiency of 83.26% ± 13.02 across all HMs, whereas carbonaceous-modified systems (S4–S6) exhibited high removal efficiencies, exceeding 97.00% ± 1.89. Residual and Fe/Mn oxide states were predominant among the HMs, exceeding 43.69%, indicating enhanced metal immobilization. The ecological risks of carbon nanotubes and graphene were the highest, with risk indices of 1123.02 and 1129.63, respectively. These findings demonstrated that carbonaceous fillers achieved superior HM sequestration, leading to an overall reduction in ecological risk in the effluent of PPS after long-term operation. Overall, this study provided new perspectives on elucidating long-term removal efficiency and the ecological risk mitigation of PPS, and supported future application of carbonaceous fillers in sustainable PPS design and construction.
- 18 December 2025
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 237 (5) , 296
Study on the Removal and Mechanism of Runoff Pollutants by Different Permeable Paving Systems
- 18 December 2025
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 237 (5) , 296
Study on the Removal and Mechanism of Runoff Pollutants by Different Permeable Paving Systems
- 17 September 2025
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 162, 23-33
Synergistic efficiency of COD removal and CO2 emissions in biochar-modified bioretention systems
- 17 September 2025
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 162, 23-33
Synergistic efficiency of COD removal and CO2 emissions in biochar-modified bioretention systems
- Open Access
- 8 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (8) , 3322
β-Cyclodextrin/Graphene Oxide Multilayer Composite Membrane: A Novel Sustainable Strategy for High-Efficiency Removal of Pharmaceuticals and Personal Care Products
The efficient removal of pharmaceuticals and personal care products (PPCPs) from aqueous solutions using conventional adsorbents is hindered by low adsorption capacity, insufficient selectivity, poor regeneration performance, and limited stability. In this study, a multilayer β-CD/GO membrane was successfully prepared via layer-by-layer coating with β-cyclodextrin (β-CD) and graphene oxide (GO). The multilayer β-CD/GO membrane combines the host–guest complexation ability of β-CD with the abundant oxygen-containing functional groups of GO to enhance the targeted removal of PPCPs (CTD, SMZ, and DCF) from aqueous solutions. The prepared multilayer β-CD/GO membrane adsorbent overcomes the separation difficulties and poor regeneration performance of powdered adsorbents, and the multilayer structure can significantly enhance structural stability and increase the number of adsorption sites. Batch adsorption experiments showed that the optimal adsorption performance of the multilayer β-CD/GO membrane for PPCPs occurred at pH 4 and in the absence of coexisting ions. With increasing pH values in the range of 4–9, the adsorption capacities of CTD, SMZ, and DCF slightly decreased to 14.37, 13.69, and 13.01 mg/g, respectively, and the adsorption capacities decreased slowly to 4.88, 3.51, and 3.26 mg/g as the coexisting ion concentrations increased from 0 to 0.20 mol/L. The adsorption mechanism of the multilayer β-CD/GO membrane for PPCPs was systematically investigated through adsorption kinetics, isotherms, and thermodynamics. The adsorption processes of CTD, SMZ, and DCF by the multilayer β-CD/GO membrane were well described by both pseudo-first-order and pseudo-second-order kinetic models (R2 > 0.984), suggesting a hybrid adsorption mechanism involving both physisorption and chemisorption. The isotherm results indicated that the adsorption of CTD by the multilayer β-CD/GO membrane followed the Langmuir model (R2 = 0.923), whereas the adsorption of SMZ and DCF was better described by the Freundlich model (R2 = 0.984–0.988). The multilayer β-CD/GO membrane exhibited high adsorption capacities for CTD, SMZ, and DCF with maximum capacities of 35.56, 43.29, and 39.49 mg/g, respectively. Thermodynamic analyses indicated that the adsorption of PPCPs was exothermic ( = −86.16 to −218.49 J/mol/K) and non-spontaneous ( = 9.84–11.56, 9.50–12.54, and 10.09–14.46 kJ/mol). The multilayer β-CD/GO membrane maintained a removal efficiency of over 58.45–71.73% for CTD, SMZ, and DCF after five consecutive regeneration cycles, demonstrating high reusability for practical applications. The adsorption mechanisms of the multilayer β-CD/GO membrane include electrostatic interactions, hydrogen bonding, hydrophobic interactions, and π-π EDA interactions. This study offers a promising and environmentally friendly adsorbent for the efficient removal of PPCPs from aqueous solutions.- 8 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (8) , 3322
Open Accessβ-Cyclodextrin/Graphene Oxide Multilayer Composite Membrane: A Novel Sustainable Strategy for High-Efficiency Removal of Pharmaceuticals and Personal Care Products
The efficient removal of pharmaceuticals and personal care products (PPCPs) from aqueous solutions using conventional adsorbents is hindered by low adsorption capacity, insufficient selectivity, poor regeneration performance, and limited stability. In this study, a multilayer β-CD/GO membrane was successfully prepared via layer-by-layer coating with β-cyclodextrin (β-CD) and graphene oxide (GO). The multilayer β-CD/GO membrane combines the host–guest complexation ability of β-CD with the abundant oxygen-containing functional groups of GO to enhance the targeted removal of PPCPs (CTD, SMZ, and DCF) from aqueous solutions. The prepared multilayer β-CD/GO membrane adsorbent overcomes the separation difficulties and poor regeneration performance of powdered adsorbents, and the multilayer structure can significantly enhance structural stability and increase the number of adsorption sites. Batch adsorption experiments showed that the optimal adsorption performance of the multilayer β-CD/GO membrane for PPCPs occurred at pH 4 and in the absence of coexisting ions. With increasing pH values in the range of 4–9, the adsorption capacities of CTD, SMZ, and DCF slightly decreased to 14.37, 13.69, and 13.01 mg/g, respectively, and the adsorption capacities decreased slowly to 4.88, 3.51, and 3.26 mg/g as the coexisting ion concentrations increased from 0 to 0.20 mol/L. The adsorption mechanism of the multilayer β-CD/GO membrane for PPCPs was systematically investigated through adsorption kinetics, isotherms, and thermodynamics. The adsorption processes of CTD, SMZ, and DCF by the multilayer β-CD/GO membrane were well described by both pseudo-first-order and pseudo-second-order kinetic models (R2 > 0.984), suggesting a hybrid adsorption mechanism involving both physisorption and chemisorption. The isotherm results indicated that the adsorption of CTD by the multilayer β-CD/GO membrane followed the Langmuir model (R2 = 0.923), whereas the adsorption of SMZ and DCF was better described by the Freundlich model (R2 = 0.984–0.988). The multilayer β-CD/GO membrane exhibited high adsorption capacities for CTD, SMZ, and DCF with maximum capacities of 35.56, 43.29, and 39.49 mg/g, respectively. Thermodynamic analyses indicated that the adsorption of PPCPs was exothermic ( = −86.16 to −218.49 J/mol/K) and non-spontaneous ( = 9.84–11.56, 9.50–12.54, and 10.09–14.46 kJ/mol). The multilayer β-CD/GO membrane maintained a removal efficiency of over 58.45–71.73% for CTD, SMZ, and DCF after five consecutive regeneration cycles, demonstrating high reusability for practical applications. The adsorption mechanisms of the multilayer β-CD/GO membrane include electrostatic interactions, hydrogen bonding, hydrophobic interactions, and π-π EDA interactions. This study offers a promising and environmentally friendly adsorbent for the efficient removal of PPCPs from aqueous solutions. - Open Access
Removal Efficiency and Mechanism of Typical PPCPs onto Novel Cyclodextrin–Graphene Oxide Composite Adsorbent in Aqueous Solutions
A novel β-cyclodextrin–graphene oxide (β-CD/GO) composite adsorbent was synthesized via a hydrothermal method. Removal efficiency and mechanisms of typical pharmaceutical and personal care products (PPCPs) by the β-CD/GO composite were investigated in aqueous solutions. The results demonstrated that the β-CD/GO composite was successfully formed through cross-linking between β-CD and GO nanosheets, exhibiting enriched hydroxyl groups, a porous layered structure, and good thermal stability. The adsorption of cimetidine (CTD), sulfamethazine (SMZ), and diclofenac (DCF) onto the β-CD/GO composite was well described by pseudo-first-order and pseudo-second-order kinetic models, and Langmuir isotherm. The maximum adsorption capacities of CTD, SMZ, and DCF onto the β-CD/GO composite were 58.86, 35.62, and 29.11 mg g−1 at 298 K, respectively. The adsorption process was rapid and reached equilibrium after 6 h. The adsorption followed a monolayer mechanism and was an exothermic process. The adsorption capacity decreased with increasing pH values and ion concentrations. The β-CD/GO composite exhibited maximum adsorption capacities of 17.69, 16.96, and 16.23 mg g−1 for CTD, SMZ, and DCF, respectively, under a pH of 4 with a dosage of 1.0 g/L at 298 K for 6 h. Due to the combined impacts of electrostatic interaction, hydrogen bonding, and host–guest interaction, the adsorption of PPCPs onto β-CD/GO composite was fast and efficient. β-CD/GO composite exhibited superior adsorption efficacy and structural stability, which highlighted its promising application in the elimination of micropollutants from aqueous solutions.
Open AccessRemoval Efficiency and Mechanism of Typical PPCPs onto Novel Cyclodextrin–Graphene Oxide Composite Adsorbent in Aqueous Solutions
A novel β-cyclodextrin–graphene oxide (β-CD/GO) composite adsorbent was synthesized via a hydrothermal method. Removal efficiency and mechanisms of typical pharmaceutical and personal care products (PPCPs) by the β-CD/GO composite were investigated in aqueous solutions. The results demonstrated that the β-CD/GO composite was successfully formed through cross-linking between β-CD and GO nanosheets, exhibiting enriched hydroxyl groups, a porous layered structure, and good thermal stability. The adsorption of cimetidine (CTD), sulfamethazine (SMZ), and diclofenac (DCF) onto the β-CD/GO composite was well described by pseudo-first-order and pseudo-second-order kinetic models, and Langmuir isotherm. The maximum adsorption capacities of CTD, SMZ, and DCF onto the β-CD/GO composite were 58.86, 35.62, and 29.11 mg g−1 at 298 K, respectively. The adsorption process was rapid and reached equilibrium after 6 h. The adsorption followed a monolayer mechanism and was an exothermic process. The adsorption capacity decreased with increasing pH values and ion concentrations. The β-CD/GO composite exhibited maximum adsorption capacities of 17.69, 16.96, and 16.23 mg g−1 for CTD, SMZ, and DCF, respectively, under a pH of 4 with a dosage of 1.0 g/L at 298 K for 6 h. Due to the combined impacts of electrostatic interaction, hydrogen bonding, and host–guest interaction, the adsorption of PPCPs onto β-CD/GO composite was fast and efficient. β-CD/GO composite exhibited superior adsorption efficacy and structural stability, which highlighted its promising application in the elimination of micropollutants from aqueous solutions.
- 11 March 2024
- Published by Elsevier in Science of The Total Environment
- Vol. 924, 171634
Investigation the existence and mechanism of Cu(II)-sulfamethoxazole co-pollution by road-deposited sediments in stormwater runoff
- 11 March 2024
- Published by Elsevier in Science of The Total Environment
- Vol. 924, 171634
Investigation the existence and mechanism of Cu(II)-sulfamethoxazole co-pollution by road-deposited sediments in stormwater runoff
- Open Access
Review on Research and Application of Enhanced In-Situ Bioremediation Agents for Organic Pollution Remediation in Groundwater
Groundwater is an important part of the water resources, crucial for human production and life. With the rapid development of industry and agriculture, organic pollution of groundwater has attracted great attention. Enhanced in-situ bioremediation of groundwater technology has gradually gained attention because of its high efficiency and low environmental impact. Bioremediation agents are crucial for bioremediation technology. In this review, bioremediation agents were classified into three categories: biological nutrition agents, slow-release agents, and microbial agents. Biological nutrition agents are a specific mixture of mineral salt and carbon source; slow-release agents may contain mineral salt, carbon source, pH buffers, and oxygen-releasing material and microbial agents with specific microbial culture. By adding bioremediation agents to the polluted sites, they can improve population density and degradation efficiency for microbial degradation of pollutants. To assist future development and application of bioremediation agents, the development of different agents in laboratory and commercial to date was retrieved online via publisher sites and cooperation case studies. The data collected were analyzed and reviewed, as well as application and remediation effects of enhanced in-situ bioremediation agents were summarized. Current studies mainly focus on laboratory development and experiments, while field tests and remediation effects between different agents are of less concern. Further study may focus on developing new materials, especially coating or loading materials, and systematic evaluation of different agents, considering both laboratory research and on-site experiments, in order to improve the efficiency of in situ organically contaminated groundwater bioremediation.
Open AccessReview on Research and Application of Enhanced In-Situ Bioremediation Agents for Organic Pollution Remediation in Groundwater
Groundwater is an important part of the water resources, crucial for human production and life. With the rapid development of industry and agriculture, organic pollution of groundwater has attracted great attention. Enhanced in-situ bioremediation of groundwater technology has gradually gained attention because of its high efficiency and low environmental impact. Bioremediation agents are crucial for bioremediation technology. In this review, bioremediation agents were classified into three categories: biological nutrition agents, slow-release agents, and microbial agents. Biological nutrition agents are a specific mixture of mineral salt and carbon source; slow-release agents may contain mineral salt, carbon source, pH buffers, and oxygen-releasing material and microbial agents with specific microbial culture. By adding bioremediation agents to the polluted sites, they can improve population density and degradation efficiency for microbial degradation of pollutants. To assist future development and application of bioremediation agents, the development of different agents in laboratory and commercial to date was retrieved online via publisher sites and cooperation case studies. The data collected were analyzed and reviewed, as well as application and remediation effects of enhanced in-situ bioremediation agents were summarized. Current studies mainly focus on laboratory development and experiments, while field tests and remediation effects between different agents are of less concern. Further study may focus on developing new materials, especially coating or loading materials, and systematic evaluation of different agents, considering both laboratory research and on-site experiments, in order to improve the efficiency of in situ organically contaminated groundwater bioremediation.
- 30 November 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 350, 119671
The investigation of the binding ability between sodium dodecyl sulfate and Cu (II) in urban stormwater runoff
- 30 November 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 350, 119671
The investigation of the binding ability between sodium dodecyl sulfate and Cu (II) in urban stormwater runoff
- 18 September 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (48) , 104958-104975
Research progress of MOF-based membrane reactor coupled with AOP technology for organic wastewater treatment
MOF-based catalytic membrane reactor (MCMR), which can simultaneously achieve membrane separation and chemical catalytic degradation in an integrated system, is a cutting-edge technology for effective treatment of organic pollutants in water. The coupling of MCMR and advanced oxidation process (AOP) not only significantly improves the pollutant removal efficiency but also inhibits the membrane pollution through self-cleaning effect, thus improving the stability of MCMR. This paper reviews different MCMR systems combined with photocatalysis, Fenton oxidation, and persulfate activation, elucidates the reaction mechanism, discusses key issues to improve system effectiveness, and suggests future challenges and research directions.
- 18 September 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (48) , 104958-104975
Research progress of MOF-based membrane reactor coupled with AOP technology for organic wastewater treatment
MOF-based catalytic membrane reactor (MCMR), which can simultaneously achieve membrane separation and chemical catalytic degradation in an integrated system, is a cutting-edge technology for effective treatment of organic pollutants in water. The coupling of MCMR and advanced oxidation process (AOP) not only significantly improves the pollutant removal efficiency but also inhibits the membrane pollution through self-cleaning effect, thus improving the stability of MCMR. This paper reviews different MCMR systems combined with photocatalysis, Fenton oxidation, and persulfate activation, elucidates the reaction mechanism, discusses key issues to improve system effectiveness, and suggests future challenges and research directions.
- Open Access
- 22 May 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (10) , 6306
Surfactant-Modified Construction Waste Bricks for the Removal of Diclofenac from Aqueous Solutions
This study aimed to enhance the efficiency of construction waste bricks (PRBPs) in removing diclofenac (DFC) by preparing surfactant-modified waste bricks (CCBPs) as adsorbents. The properties of the adsorbents were analyzed, and the parameters related to the adsorption process were examined. The findings demonstrate that the addition of cetyltrimethyl ammonium bromide (CTAB) significantly improved the ability of the waste bricks to adsorb DCF. The pH values affected the adsorption behavior, with the adsorption decreasing as the pH increased. The adsorption process followed the pseudo-first-order kinetic equation, and the rate of adsorption was fast. The Langmuir model was used to fit the adsorption isotherms. According to the adsorption thermodynamics, the adsorption of DCF onto both adsorbents was exothermic, and it was more favorable at lower temperatures. The adsorption capacity of the CCBPs decreased sharply as the KCl concentration increased. The mechanism of adsorption might be explained by the interplay of the π-π interaction, surface complexation, and electrostatic interaction. This study offers a new method for removing micropollutants from aqueous solutions using waste bricks, thus extending the scope of their reuse applications.
- 22 May 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (10) , 6306
Open AccessSurfactant-Modified Construction Waste Bricks for the Removal of Diclofenac from Aqueous Solutions
This study aimed to enhance the efficiency of construction waste bricks (PRBPs) in removing diclofenac (DFC) by preparing surfactant-modified waste bricks (CCBPs) as adsorbents. The properties of the adsorbents were analyzed, and the parameters related to the adsorption process were examined. The findings demonstrate that the addition of cetyltrimethyl ammonium bromide (CTAB) significantly improved the ability of the waste bricks to adsorb DCF. The pH values affected the adsorption behavior, with the adsorption decreasing as the pH increased. The adsorption process followed the pseudo-first-order kinetic equation, and the rate of adsorption was fast. The Langmuir model was used to fit the adsorption isotherms. According to the adsorption thermodynamics, the adsorption of DCF onto both adsorbents was exothermic, and it was more favorable at lower temperatures. The adsorption capacity of the CCBPs decreased sharply as the KCl concentration increased. The mechanism of adsorption might be explained by the interplay of the π-π interaction, surface complexation, and electrostatic interaction. This study offers a new method for removing micropollutants from aqueous solutions using waste bricks, thus extending the scope of their reuse applications.