SBStuart Barth

Stuart Barth

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Stuart Barth has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The MTM-EBG as a Rigorous Multiconductor Model of the UC-EBG and Approaches for Miniaturization

    by Stuart Barth, Ashwin K. Iyer

    A multiconductor transmission-line (MTL) model is proposed with which to model the uniplanar compact electromagnetic bandgap structure (UC-EBG). The model is based on a 2-D arrangement of metamaterial-based electromagnetic bandgap structures (MTM-EBGs), with a central node region. The branches of this structure are modeled as conductor-backed coplanar waveguide segments with integrated series capacitors, while the node region is modeled as a grid of microstrip (MS) lines with suitably augmented propagation velocities. The dispersion properties of the canonical UC-EBG unit cell are simulated in Ansys HFSS and compared with those of an equivalent simulation model based on a 2-D arrangement of weakly loaded MTM-EBGs, as well as similar data produced by the MTL equivalent-circuit model, which are all found to be in agreement. It is then shown that additional capacitive loading allows for substantial miniaturization, a regime in which even better agreement is produced between the equivalent circuit model’s dispersion data and the data produced by an equivalent HFSS model. Using these data, the Bloch modes of this structure are analyzed in detail. Thus, the MTL perspective offers a recipe for producing highly miniaturized UC-EBG unit cells that may be successfully integrated into printed circuit board (PCB) systems for applications in parallel-plate noise and surface-wave (SW) mode suppression, among others.


  • Open Access

    A Novel Scaling Process for the Computation of Multiconductor Transmission-Line Modal Properties Using the Basis Invariance of Total Current and Power

    by Stuart Barth, Ashwin K. Iyer

    It is generally regarded that some properties of the characteristic modes of multiconductor transmission lines, such as per-unit-length impedance, admittance, or characteristic impedance, cannot be meaningfully computed analytically. This inability arises from the nature of the definition of the modes – sets of relative voltages and/or currents – which in the prevailing understanding may be arbitrarily scaled. Several methods with which to compute scaling factors have been proposed, but often – and as demonstrated in this work – the results of these processes do not agree with values determined directly from field quantities or experiments. This work begins by examining several facets of multiconductor-transmission-line modes under the approximation of ideal TEM propagation: firstly, that transmission-line modes are normal, and secondly, that as a result of possessing this property, it is postulated that total currents in the terminal domain may be directly equated to those in the modal domain. It is then shown that these relations allow the scaling factors to be determined to within a sign, and as a result, modal properties may be directly computed. This technique allows for the extraction of the modal transmission-line properties for any arbitrary system of conductors. Multiple examples are studied numerically, in which it is shown that the proposed process results in much stronger agreement with field solution than other proposed processes, and further validation of the proposed process is provided though experimentally obtained data.


  • Compact Mechanically Tunable Microstrip Bandstop Filter With Constant Absolute Bandwidth Using an Embedded Metamaterial-Based EBG

    by Jacob A. Brown, Stuart Barth, Braden P. Smyth, Ashwin K. Iyer

    A mechanically tunable, constant-absolute-bandwidth (ABW) bandstop filter is realized using the metamaterial-based electromagnetic bandgap structure (MTM-EBG). The MTM-EBG is embedded within a microstrip (MS) line and used to produce a bandstop filtering response, with a topology that is compact, uniplanar, and fully printable. A three-cell MTM-EBG-based MS bandstop filter is designed and experimentally verified for operation centered at 4.18 GHz with a 10-dB rejection bandwidth of 247 MHz. This filter is then made tunable by placing a dielectric plate directly on the surface of the MTM-EBGs. Moving this plate across the surface of the MTM-EBGs changes their reactive loading and, consequently, shifts their response. To ensure a constant ABW, the dielectric plate is perforated to produce an effective plate permittivity that varies for each unit cell. The tunable filter is then fabricated, with the dielectric plate applied to the MTM-EBG-based bandstop filter using a 3-D printed superstructure. A tuning range of 3.80 GHz ± 6.2% and a 10-dB bandstop ABW of 244 MHz ± 1.3% are demonstrated, showing good agreement with the simulated data. The MTM-EBG-based tunable bandstop filter has a variation in ABW comparable to 3-D filters (which typically have substantially lower variation in ABW than fully planar filters) while occupying substantially less area than alternate planar realizations.


  • Theory and Design of Dual-Band Microstrip Networks Using Embedded Metamaterial-Based Electromagnetic Bandgap Structures

    by Stuart Barth, Braden P. Smyth, Jacob A. Brown, Ashwin K. Iyer

    This work examines implementations of the recently introduced metamaterial (MTM)-based electromagnetic bandgap (EBG) structure, or MTM-EBG, which may be embedded directly into the transmission-line (TL) segments of microstrip (MS) networks and whose dispersion properties may be accurately determined using multiconductor TL (MTL) theory. Two methods of imparting dual-band behavior to MS-based networks are introduced: utilizing stopband and passband regions of the EBG for frequency-selective signal routing, and using the phasing properties of the EBG to provide equal phase shifts at two separate frequencies. Two topological variants of the MTMEBG are introduced and shown to provide different bandgap sizes, suiting each proposed application. A dual-band Wilkinson power divider, a dual-band quadrature hybrid coupler, and a dual-band impedance transformer are designed with embedded MTM-EBGs, which due to their ability to be realized in an entirely uniplanar form without vias and using a single dielectric layer, allow these devices to be entirely printable as well. The performance characteristics of all three devices are simulated and demonstrate excellent agreement with measurements. The design methodology is general and based on a rigorous MTL circuit model, making this approach amenable to a variety of MS networks, beyond what is presented.


  • Dual-Band Microstrip Corporate Feed Network Using an Embedded Metamaterial-Based EBG

    by Jacob A. Brown, Stuart Barth, Braden P. Smyth, Ashwin K. Iyer

    This work demonstrates the design and experimental validation of a dual-band microstrip (MS) corporate feed network using an embedded metamaterial-based electromagnetic bandgap structure (MTM-EBG). The MTM-EBG is designed to appear as a 35.4-Ω MS transmission line (TL) with a 90∘ electrical length at both 2.4 GHz and 5.0 GHz. This structure is then used in place of a conventional single-band quarter-wavelength transformer in a 50-Ω MS T-junction power divider, rendering it dual-band with 10-dB return-loss fractional bandwidths of 82.3% and 12.0% at center frequencies of 2.4 GHz and 5.0 GHz, respectively. The result of this modification is very good performance at both operating frequencies as well as substantial rejection over a prescribed bandwidth of intermediate frequencies. The dual-band transformer formed by the embedded MTM-EBG is 30.5% miniaturized at 2.4 GHz relative to a conventional MS quarter-wavelength transformer, which indicates potential for usage in size-restricted scenarios and embedded filtering applications. A dual-band four-way corporate feed network is then formed by cascading the MTM-EBG-loaded T-junction power dividers, which is suitable for antenna array applications. This structure has improved performance at 2.4 GHz and 5.0 GHz compared to unloaded networks designed for these frequencies having the same overall size. The experimental 10-dB fractional bandwidth for the MTM-EBG-loaded corporate feed network was found to be 52.0% and 10.8% around 2.4 GHz and 5.0 GHz, respectively.


  • Open Access

    On the Unique Determination of Modal Multiconductor Transmission-Line Properties

    by Stuart Barth, Ashwin K. Iyer

    Some modal (or decoupled) transmission-line properties such as per-unit-length impedance, admittance, or characteristic impedance have long been held to be, in general, non-unique. This ambiguity arises from the nature of the similarity transformations used to relate the terminal and modal domains, for which the voltage transformation matrix has been shown to be only loosely related to the corresponding current transformation matrix. Modern methods have attempted to relate the two, but these relations typically rely on arbitrary normalizations, leading to strictly incorrect and/or non-unique results. This work introduces relations between the two transformations, derived from the physical equivalence of total power and currents between the two domains, by which the transformation matrices can be unambiguously related to each other, and the modal properties uniquely solved. This technique allows for the correct extraction of the modal transmission-line properties for any arbitrary system of conductors. Multiple examples are studied to validate the proposed solution process.