JBJacob A. Brown

Jacob A. Brown

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jacob A. Brown has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Compact Mechanically Tunable Microstrip Bandstop Filter With Constant Absolute Bandwidth Using an Embedded Metamaterial-Based EBG

    by Jacob A. Brown, Stuart Barth, Braden P. Smyth, Ashwin K. Iyer

    A mechanically tunable, constant-absolute-bandwidth (ABW) bandstop filter is realized using the metamaterial-based electromagnetic bandgap structure (MTM-EBG). The MTM-EBG is embedded within a microstrip (MS) line and used to produce a bandstop filtering response, with a topology that is compact, uniplanar, and fully printable. A three-cell MTM-EBG-based MS bandstop filter is designed and experimentally verified for operation centered at 4.18 GHz with a 10-dB rejection bandwidth of 247 MHz. This filter is then made tunable by placing a dielectric plate directly on the surface of the MTM-EBGs. Moving this plate across the surface of the MTM-EBGs changes their reactive loading and, consequently, shifts their response. To ensure a constant ABW, the dielectric plate is perforated to produce an effective plate permittivity that varies for each unit cell. The tunable filter is then fabricated, with the dielectric plate applied to the MTM-EBG-based bandstop filter using a 3-D printed superstructure. A tuning range of 3.80 GHz ± 6.2% and a 10-dB bandstop ABW of 244 MHz ± 1.3% are demonstrated, showing good agreement with the simulated data. The MTM-EBG-based tunable bandstop filter has a variation in ABW comparable to 3-D filters (which typically have substantially lower variation in ABW than fully planar filters) while occupying substantially less area than alternate planar realizations.


  • Theory and Design of Dual-Band Microstrip Networks Using Embedded Metamaterial-Based Electromagnetic Bandgap Structures

    by Stuart Barth, Braden P. Smyth, Jacob A. Brown, Ashwin K. Iyer

    This work examines implementations of the recently introduced metamaterial (MTM)-based electromagnetic bandgap (EBG) structure, or MTM-EBG, which may be embedded directly into the transmission-line (TL) segments of microstrip (MS) networks and whose dispersion properties may be accurately determined using multiconductor TL (MTL) theory. Two methods of imparting dual-band behavior to MS-based networks are introduced: utilizing stopband and passband regions of the EBG for frequency-selective signal routing, and using the phasing properties of the EBG to provide equal phase shifts at two separate frequencies. Two topological variants of the MTMEBG are introduced and shown to provide different bandgap sizes, suiting each proposed application. A dual-band Wilkinson power divider, a dual-band quadrature hybrid coupler, and a dual-band impedance transformer are designed with embedded MTM-EBGs, which due to their ability to be realized in an entirely uniplanar form without vias and using a single dielectric layer, allow these devices to be entirely printable as well. The performance characteristics of all three devices are simulated and demonstrate excellent agreement with measurements. The design methodology is general and based on a rigorous MTL circuit model, making this approach amenable to a variety of MS networks, beyond what is presented.


  • Dual-Band Microstrip Corporate Feed Network Using an Embedded Metamaterial-Based EBG

    by Jacob A. Brown, Stuart Barth, Braden P. Smyth, Ashwin K. Iyer

    This work demonstrates the design and experimental validation of a dual-band microstrip (MS) corporate feed network using an embedded metamaterial-based electromagnetic bandgap structure (MTM-EBG). The MTM-EBG is designed to appear as a 35.4-Ω MS transmission line (TL) with a 90∘ electrical length at both 2.4 GHz and 5.0 GHz. This structure is then used in place of a conventional single-band quarter-wavelength transformer in a 50-Ω MS T-junction power divider, rendering it dual-band with 10-dB return-loss fractional bandwidths of 82.3% and 12.0% at center frequencies of 2.4 GHz and 5.0 GHz, respectively. The result of this modification is very good performance at both operating frequencies as well as substantial rejection over a prescribed bandwidth of intermediate frequencies. The dual-band transformer formed by the embedded MTM-EBG is 30.5% miniaturized at 2.4 GHz relative to a conventional MS quarter-wavelength transformer, which indicates potential for usage in size-restricted scenarios and embedded filtering applications. A dual-band four-way corporate feed network is then formed by cascading the MTM-EBG-loaded T-junction power dividers, which is suitable for antenna array applications. This structure has improved performance at 2.4 GHz and 5.0 GHz compared to unloaded networks designed for these frequencies having the same overall size. The experimental 10-dB fractional bandwidth for the MTM-EBG-loaded corporate feed network was found to be 52.0% and 10.8% around 2.4 GHz and 5.0 GHz, respectively.