JSJavier Alejandro Schmidt

Javier Alejandro Schmidt

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Javier Alejandro Schmidt has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Unraveling the defect landscape of wide-bandgap perovskites from electrical and photoelectrical characterization of thin films and solar cells

    by L. Kopprio, J. Caram, S. Le Gall, F. Ventosinos, L. Gil-Escrig, H.J. Bolink, J. Alvarez, C. Longeaud, J.-P. Kleider, J. Schmidt

  • Open Access

    Vacuum Deposition of Triple-Halide Wide-Bandgap Perovskites Enabled by Sublimation of Mixed Organic-Halide Pellets

    by Manuel Piot, Lidón Gil-Escrig, Federico Ventosinos, Cristina Roldán-Carmona, Anna Robinson, Javier A. Schmidt, Michele Sessolo, Henk J. Bolink

    Controlling the sublimation of organic compounds during perovskite deposition via coevaporation is challenging. The sublimation behavior of these materials depends strongly on their purity, and their low sticking coefficient on sensors complicates deposition rate monitoring, hindering reproducibility, particularly when multiple organic sources are involved. We introduce a novel approach in which the precursor powder is pressed into a pellet, reducing material consumption and pressure fluctuation during coevaporation. This pellet can also incorporate multiple compounds, enabling, for example, the simultaneous sublimation of methyl­ammonium iodide and chloride from a single source. Combined with a Pb­(I1–x Br x )2 source, this method makes it possible to deposit triple-halide MAPIBrCl perovskite films. We confirm the incorporation of chloride in the perovskite lattice, which proves to be beneficial for the charge transport properties of the film, increasing the fill factor in wide-bandgap solar cells. Using this approach, we achieved a champion PCE of 19.5% for a 1.66 eV bandgap perovskite.


  • Positron Annihilation Lifetime Spectroscopy of Single Crystalline CH3NH3PbBr3: Experiments and Ab Initio Calculations

    by Javier A. Schmidt, Silvia Tinte, Sergio Dalosto, Daniel Chrastina, Davide Raffaele Ceratti, Rafael Ferragut


  • Open Access

    Hole and positron interaction with vacancies and p-type dopants in epitaxially grown silicon

    by Fabio Isa, Javier A. Schmidt, Stefano Aghion, Enrico Napolitani, Giovanni Isella, Rafael Ferragut

    The concentration of vacancies and impurities in semiconductors plays a crucial role in determining their electrical, optical, and thermal properties. This study aims to clarify the nature of the interaction between positrons and ionized p-type impurities, emphasizing the similarities they share with the interaction between holes and this type of impurity. An overall strategy for investigating defects in semiconductor crystals that exhibit a combination of vacancies and p-type impurities is presented. By using positron annihilation spectroscopy, in particular, Doppler broadening of the annihilation radiation, we quantify the concentration of vacancies in epitaxial Si crystals grown by low-energy plasma-enhanced chemical vapor deposition. The vacancy number densities that we find are (1.2 ± 1.0) × 1017 cm−3 and (3.2 ± 1.5) × 1020 cm−3 for growth rates of 0.27 and 4.9 nm/s, respectively. Subsequent extended annealing of the Si samples effectively reduces the vacancy density below the sensitivity threshold of the positron technique. Secondary ion mass spectrometry indicates that the boron doping remains unaffected during the annealing treatment intended for vacancy removal. This study provides valuable insights into the intricate interplay between vacancies and ionized impurities with positrons in semiconductor crystals. The obtained results contribute to advance the control and understanding of material properties in heterostructures by emphasizing the significance of managing vacancy and dopant concentrations.


  • Singular Time‐Dependent Photoconductivity Response of MAPbI3 Samples Deposited by Vacuum Processing on Different Substrates

    by Anderzon F. Palechor-Ocampo, Jorge Caram, Pedro Hierrezuelo-Cardet, Federico Ventosinos, Daniel Pérez-Del-Rey, Henk J. Bolink, Javier A. Schmidt

    Organo–inorganic halide perovskites continue to generate enormous interest for their potential use in various optoelectronic devices. Among the different fabrication methods, vacuum thermal deposition allows uniform films over large areas, providing good material quality without using organic solvents. However, the influence of the substrate on the properties of the material deposited by vacuum processing is a point that deserves further investigation. Herein, time‐dependent photoconductivity measurements are used to investigate the dynamics of charge carriers under illumination in planar films of CH3NH3PbI3. The samples are deposited by thermal sublimation on different substrates: PbI2, TaTm, C60, and glass. Experimentally, it is shown that the substrate has a profound effect on perovskite behavior and that photoconductivity is sensitive enough to probe these behaviors. Furthermore, a model based on Shockley–Read–Hall statistics is proposed, explaining the different photoconductivity responses by changing only the relative values of the different capture coefficients and the position of the Fermi level. It is argued that the substrate changes the stoichiometry of the evaporated material, affecting the transient photoconductivity response.


  • Density of states within the bandgap of perovskite thin films studied using the moving grating technique

    by F. Ventosinos, A. Moeini, D. Pérez-Del-Rey, H. J. Bolink, J. A. Schmidt

    In this work, we further study the moving grating technique applied to halide perovskite thin-film materials. First, we show some problems that emerge when analyzing the experimental data with the classical formulation, which does not distinguish between free and trapped carriers and hence only gives average quantities for the transport parameters. We show that using a more general framework, taking into account the multiple trapping of carriers within a density of localized states, allows for an accurate description. Since it includes the density of states (DOS) of the material, it enables the possibility to test different DOS models proposed in the past for halide perovskite thin films. We check whether these models give rise to the type of curves we have measured under different experimental conditions. Finally, we propose a new model for the DOS in the forbidden gap, which results in the best fit found for the measurements performed. This allows us to give ranges of values for the parameters that define the DOS, which, as far as we know, are given for the first time.


  • Estimation of carrier mobilities and recombination lifetime in halide perovskites films using the moving grating technique

    by Federico Ventosinos, A Koffman-Frischknecht, Walter Herrera, Maximiliano Senno, J Caram, Maria Dolores Perez, J A Schmidt, Alejandro Koffman

    Pulsed excitation methods followed by time-resolved measurements have been questioned as a valid procedure to deduce transport properties of halide perovskites (HaPs). Measurements of both the majority and minority carrier’s phototransport properties, under illumination conditions as close as possible to one sun, are needed to obtain reliable information on recombination mechanisms. In this work, we show that the moving photocarrier grating technique (MGT) fulfills the above-mentioned conditions. In this method, both carriers mobilities and the common recombination lifetime are deduced from the DC short circuit current induced by the movement of an interference pattern along the sample surface. We show that the method, originally developed to measure the transport parameters of amorphous semiconductors, can be fully applied to HaPs films. We briefly describe the technique, we perform measurements as a function of the grating period and the light intensity, and we discuss the best approach to extract the transport parameters from MGT measurements. Finally, we find the exponents that describe the intensity dependence of the transport parameters of majority and minority carriers in a HaP sample.


  • External quantum efficiency measurements used to study the stability of differently deposited perovskite solar cells

    by Pedro Hierrezuelo-Cardet, Anderzon F. Palechor-Ocampo, Jorge Caram, Federico Ventosinos, Daniel Pérez-Del-Rey, Henk J. Bolink, Javier A. Schmidt

    The instability exhibited by perovskite solar cells when exposed to the environment under illumination is one of the major obstacles for the entry of perovskite technology in the photovoltaic market. In this work, we use the external quantum efficiency (EQE) technique to study the photoinduced degradation of two types of solar cells having CH3NH3PbI3 as an absorber layer: one deposited by spin coating with an n-i-p architecture and the other deposited by evaporation with an inverted p-i-n structure. We also study the effect of different encapsulants to protect the cells against atmospheric agents. We find that EQE provides information regarding the areas of the cell most susceptible to degradation, in addition to providing an estimate of the optical gap and the Urbach energy of the absorbent material. We confirm that the combined action of illumination and the environment markedly accelerate the degradation, which is reflected in the deterioration of all the parameters of the cell. The rear part of the cell is the first region to suffer the light-induced degradation. On the other hand, the cells deposited by evaporation and with a good encapsulation process are highly stable since after 30 h of exposure just a small spectral change is noticed in the red/infrared region of the EQE spectrum.


  • The chopped moving photocarrier grating technique

    by Leonardo Kopprio, Federico Ventosinos, Javier Schmidt

    The Moving photocarrier Grating Technique (MGT) allows the simultaneous determination of the photocarrier drift mobilities and the small-signal recombination lifetime of photoconductive semiconductors. The technique measures the direct current (DC) induced by a monochromatic illumination consisting of a moving interference pattern superimposed on a uniform background of much higher intensity. A drawback of the technique is the low level of the signal to be measured, which can be masked by the noise at low temperatures or low light intensities. In this work, we propose implementing an alternating current (AC) version of the MGT by chopping the weak beam in the standard configuration. We call this new technique the Chopped Moving photocarrier Grating (CMG). In CMG, the AC signal can be measured with a lock-in amplifier for electrical noise removal. In this way, the signal-to-noise ratio can be increased compared to the standard DC technique. Assuming a multiple-trapping model for charge transport, we find the theoretical expression for the current density induced by CMG at fundamental frequency. By using a numerical simulation with parameters typical for hydrogenated amorphous silicon, we verify the expected equivalence between both techniques for low enough chopping frequencies. Then, we test experimentally this equivalence for an undoped hydrogenated amorphous silicon sample. For low signal levels, we demonstrate the superior performance of CMG.