Hanny Frans Sangian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Interests
Hanny Frans Sangian has a total of 138 co-authors. Here are the top co-authors by number of shared publications:
- Arief Widjaja
Departemen Teknik Kimia Institut Teknologi Sepuluh Nopember
6 shared publications - Silvya Yusnica Agnesty
Politeknik Energi dan Mineral Akamigas, Indonesia
6 shared publications - Gerald Hendrik Tamuntuan
Sam Ratulangi University, Indonesia
5 shared publications - Guntur Pasau
Sam Ratulangi University, Indonesia
4 shared publications Arief Widjaja
Department of Chemical Engineering, Institut Teknologi Sepuluh Nopember, 60111, Surabaya, Indonesia
3 shared publications- Arief Widjaja
Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia
3 shared publications
Latest Publications
- 1 January 2026
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
Fuel Specifications of Aqueous Ethanol-Butanol-Gasoline in Stable Emulsion
This study investigates the fuel properties of ethanol-butanol-gasoline emulsions prepared with varying ethanol concentrations (80, 90, and 96%) to develop stable and efficient alternative fuels. Key parameters evaluated include the research octane number (RON), Reid vapor pressure (RVP), fuel density, specific gravity (SG), distillation characteristics, and copper strip corrosion resistance, with an emphasis on stability and performance at temperatures between 15 and 30 °C. The results indicate that these fuel blends exhibit high octane ratings, with RON values ranging from 91.8 to 94.1, demonstrating strong anti-knock characteristics suitable for high-performance engines. The RVP increases from 41 to 50 kPa as ethanol content rises, supporting stability under diverse environmental conditions. Fuel density decreases from 0.798 to 0.759 g cm-3, while SG ranges from 0.770 to 0.715, reflecting the influence of ethanol content on fuel mass and volume. Copper strip corrosion tests conducted in accordance with American Society for Testing and Materials, ASTM D130 standards confirmed that all blends are non-corrosive, achieving a “Class 1” corrosion rating and ensuring compatibility with engines containing copper or other metallic components. Distillation tests revealed initial boiling points (IBP) between 41 and 45 °C and final boiling points (FBP) from 122 to 177 °C. Overall, these findings suggest that ethanol-butanol-gasoline emulsions offer notable benefits for enhancing engine performance, reducing emissions, and improving fuel stability.
- 1 January 2026
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
Fuel Specifications of Aqueous Ethanol-Butanol-Gasoline in Stable Emulsion
This study investigates the fuel properties of ethanol-butanol-gasoline emulsions prepared with varying ethanol concentrations (80, 90, and 96%) to develop stable and efficient alternative fuels. Key parameters evaluated include the research octane number (RON), Reid vapor pressure (RVP), fuel density, specific gravity (SG), distillation characteristics, and copper strip corrosion resistance, with an emphasis on stability and performance at temperatures between 15 and 30 °C. The results indicate that these fuel blends exhibit high octane ratings, with RON values ranging from 91.8 to 94.1, demonstrating strong anti-knock characteristics suitable for high-performance engines. The RVP increases from 41 to 50 kPa as ethanol content rises, supporting stability under diverse environmental conditions. Fuel density decreases from 0.798 to 0.759 g cm-3, while SG ranges from 0.770 to 0.715, reflecting the influence of ethanol content on fuel mass and volume. Copper strip corrosion tests conducted in accordance with American Society for Testing and Materials, ASTM D130 standards confirmed that all blends are non-corrosive, achieving a “Class 1” corrosion rating and ensuring compatibility with engines containing copper or other metallic components. Distillation tests revealed initial boiling points (IBP) between 41 and 45 °C and final boiling points (FBP) from 122 to 177 °C. Overall, these findings suggest that ethanol-butanol-gasoline emulsions offer notable benefits for enhancing engine performance, reducing emissions, and improving fuel stability.
- Open Access
- 1 January 2026
- Published by Elsevier in South African Journal of Chemical Engineering
- Vol. 56, 100826
Recovery of fuel liquid from plastic waste using Ni/ZSM-5 catalyst by distillation bubble cap plate column
- 1 January 2026
- Published by Elsevier in South African Journal of Chemical Engineering
- Vol. 56, 100826
Open AccessRecovery of fuel liquid from plastic waste using Ni/ZSM-5 catalyst by distillation bubble cap plate column
- 8 September 2025
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 27 (6) , 4167-4191
Ongoing progress on γ-irradiation technology for lignocellulosic biomass pretreatment in producing bioethanol
- 8 September 2025
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 27 (6) , 4167-4191
Ongoing progress on γ-irradiation technology for lignocellulosic biomass pretreatment in producing bioethanol
- Open Access
- 10 June 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Enhanced solar desalination performance via integrated interfacial heating and PV-assisted water circulation in a modified single-slope solar still
- 10 June 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Open AccessEnhanced solar desalination performance via integrated interfacial heating and PV-assisted water circulation in a modified single-slope solar still
- Open Access
- 11 October 2024
- Published by Universitas Sam Ratulangi in VIVABIO: Jurnal Pengabdian Multidisiplin
- Vol. 6 (3) , 184-193
APLIKASI BIOETANOL AREN SEBAGAI DISINFEKTAN UNTUK PETERNAKAN AYAM
This work explores the application of bioethanol derived from the sap of Arenga pinnata (sugar palm) as a disinfectant in poultry farming. Bioethanol, commonly known as an alternative fuel, also has strong antimicrobial properties, making it effective in eliminating bacteria, viruses, and fungi. Using Arenga pinnata as a bioethanol source provides a sustainable solution by leveraging renewable resources and reducing reliance on more hazardous chemical disinfectants. The study covers bioethanol production through fermentation, optimizing fermentation conditions to maximize ethanol yield. The antimicrobial efficacy tests show that bioethanol significantly reduces microbial load on poultry farm equipment and surfaces. Furthermore, feeding sick poultry with bioethanol-enhanced feed led to noticeable improvements within 2-3 days. These findings highlight bioethanol’s potential as an eco-friendly and safe disinfectant for both workers and poultry, offering practical guidelines for its application in farming.
- 11 October 2024
- Published by Universitas Sam Ratulangi in VIVABIO: Jurnal Pengabdian Multidisiplin
- Vol. 6 (3) , 184-193
Open AccessAPLIKASI BIOETANOL AREN SEBAGAI DISINFEKTAN UNTUK PETERNAKAN AYAM
This work explores the application of bioethanol derived from the sap of Arenga pinnata (sugar palm) as a disinfectant in poultry farming. Bioethanol, commonly known as an alternative fuel, also has strong antimicrobial properties, making it effective in eliminating bacteria, viruses, and fungi. Using Arenga pinnata as a bioethanol source provides a sustainable solution by leveraging renewable resources and reducing reliance on more hazardous chemical disinfectants. The study covers bioethanol production through fermentation, optimizing fermentation conditions to maximize ethanol yield. The antimicrobial efficacy tests show that bioethanol significantly reduces microbial load on poultry farm equipment and surfaces. Furthermore, feeding sick poultry with bioethanol-enhanced feed led to noticeable improvements within 2-3 days. These findings highlight bioethanol’s potential as an eco-friendly and safe disinfectant for both workers and poultry, offering practical guidelines for its application in farming.
- Open Access
Effect of Hydrochloric Acid Hydrolysis under Sonication and Hydrothermal Process to Produce Cellulose Nanocrystals from Oil Palm Empty Fruit Bunch (OPEFB)
This paper presents an approach for hydrolyzing cellulose nanocrystals from oil palm empty fruit bunch (OPEFB) presented through hydrochloric acid hydrolysis under sonication–hydrothermal conditions. Differences in concentration, reaction time, and acid-to-cellulose ratio affect toward the yield, crystallinity, microstructure, and thermal stability were obtained. The highest yield of cellulose nanocrystals up to 74.82%, crystallinity up to 78.59%, and a maximum degradation temperature (Tmax) of 339.82 °C were achieved through hydrolysis using 3 M HCl at 110 °C during 1 h. X-ray diffraction analysis indicated a higher diffraction peak pattern at 2θ = 22.6° and a low diffraction peak pattern at 2θ = 18°. All cellulose nanocrystals showed a crystalline size of under 1 nm, and it was indicated that the sonication–hydrothermal process could reduce the crystalline size of cellulose. Infrared spectroscopy analysis showed that a deletion of lignin and hemicellulose was demonstrated in the spectrum. Cellulose nanocrystal morphology showed a more compact structure and well-ordered surface arrangement than cellulose. Cellulose nanocrystals also had good thermal stability, as a high maximum degradation temperature was indicated, where CNC-D1 began degrading at temperatures (T0) of 307.09 °C and decomposed (Tmax) at 340.56 °C.
Open AccessEffect of Hydrochloric Acid Hydrolysis under Sonication and Hydrothermal Process to Produce Cellulose Nanocrystals from Oil Palm Empty Fruit Bunch (OPEFB)
This paper presents an approach for hydrolyzing cellulose nanocrystals from oil palm empty fruit bunch (OPEFB) presented through hydrochloric acid hydrolysis under sonication–hydrothermal conditions. Differences in concentration, reaction time, and acid-to-cellulose ratio affect toward the yield, crystallinity, microstructure, and thermal stability were obtained. The highest yield of cellulose nanocrystals up to 74.82%, crystallinity up to 78.59%, and a maximum degradation temperature (Tmax) of 339.82 °C were achieved through hydrolysis using 3 M HCl at 110 °C during 1 h. X-ray diffraction analysis indicated a higher diffraction peak pattern at 2θ = 22.6° and a low diffraction peak pattern at 2θ = 18°. All cellulose nanocrystals showed a crystalline size of under 1 nm, and it was indicated that the sonication–hydrothermal process could reduce the crystalline size of cellulose. Infrared spectroscopy analysis showed that a deletion of lignin and hemicellulose was demonstrated in the spectrum. Cellulose nanocrystal morphology showed a more compact structure and well-ordered surface arrangement than cellulose. Cellulose nanocrystals also had good thermal stability, as a high maximum degradation temperature was indicated, where CNC-D1 began degrading at temperatures (T0) of 307.09 °C and decomposed (Tmax) at 340.56 °C.
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3132 (1) , 030010
Profile of equilibrium compositions of the aqueous ethanol-gasoline (RONs 88), aqueous ethanol-gasoline (RONs 90), and aqueous ethanol-gasoline (RONs 92) in stable emulsion
Recently, the world has been facing the scarcity of fossil-based fuels, such as gasoline, diesel, and natural gas, as their prices are surging. Meanwhile, the t Recently, the world has been facing the scarcity of fossil-based fuels, such as gasoline, diesel, and natural gas, as their prices are surging. Meanwhile, the t
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3132 (1) , 030010
Profile of equilibrium compositions of the aqueous ethanol-gasoline (RONs 88), aqueous ethanol-gasoline (RONs 90), and aqueous ethanol-gasoline (RONs 92) in stable emulsion
Recently, the world has been facing the scarcity of fossil-based fuels, such as gasoline, diesel, and natural gas, as their prices are surging. Meanwhile, the t Recently, the world has been facing the scarcity of fossil-based fuels, such as gasoline, diesel, and natural gas, as their prices are surging. Meanwhile, the t
- Open Access
- 31 August 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (6 (124)) , 6-17
Identifying of the compositions of the blended fuels of the butanol, gasoline, and water stabilized at low temperatures
- 31 August 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (6 (124)) , 6-17
Open AccessIdentifying of the compositions of the blended fuels of the butanol, gasoline, and water stabilized at low temperatures
- Open Access
- 28 February 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (6 (121)) , 22-32
Analysis of compositions and fuel specifications of the aqueous emulsion fuels of gasoline (RON 90)-ethanol-water in stable emulsions at low temperatures
Many countries worldwide encounter the greatest difficulties in improving people's life quality since fossil fuel reserves are decreasing, causing fuel prices to rise drastically. This problem has made many countries, including Indonesia, struggle to import them from producers in the Middle East. Adding a small part of ethanol to gasoline is one of the solutions that has been investigated and developed. The previous works relating to blended fuels, gasoline and ethanol, generally employed absolute alcohol, which was expensive. A small surfactant was added to the mixture to stabilize the emulsion, and the blending was conducted in normal conditions (room temperature). If the composition of gasoline and aqueous ethanol is not precise, the components can be separated at a specific temperature. The present study is aimed to report the analysis of compositions and fuel specifications of aqueous emulsions of gasoline (RON 90)-ethanol-water in a single phase without using a synthetic surfactant in the temperature range of 0–25 °C. The procedures were as follows: fermentation, ethanol distillation and purification, cooling, blending, and characterization of fuel specifications. Components of gasoline (RON 90)-ethanol-water formed a stable emulsion in the composition range of 28.00‒99.79 %, 0.20‒67.97 %, and 0.01‒3.58 %. The observation found that continually increasing the amount of aqueous ethanol and temperature after one phase was attained would not lead to the separation of components. Therefore, gasoline and aqueous ethanol can form a single phase functioning as a surfactant binding water and fossil fuel. The decrease in temperature after the emulsion is stabilized can separate the components whereby it is caused by the faster density change of aqueous ethanol than gasoline
- 28 February 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (6 (121)) , 22-32
Open AccessAnalysis of compositions and fuel specifications of the aqueous emulsion fuels of gasoline (RON 90)-ethanol-water in stable emulsions at low temperatures
Many countries worldwide encounter the greatest difficulties in improving people's life quality since fossil fuel reserves are decreasing, causing fuel prices to rise drastically. This problem has made many countries, including Indonesia, struggle to import them from producers in the Middle East. Adding a small part of ethanol to gasoline is one of the solutions that has been investigated and developed. The previous works relating to blended fuels, gasoline and ethanol, generally employed absolute alcohol, which was expensive. A small surfactant was added to the mixture to stabilize the emulsion, and the blending was conducted in normal conditions (room temperature). If the composition of gasoline and aqueous ethanol is not precise, the components can be separated at a specific temperature. The present study is aimed to report the analysis of compositions and fuel specifications of aqueous emulsions of gasoline (RON 90)-ethanol-water in a single phase without using a synthetic surfactant in the temperature range of 0–25 °C. The procedures were as follows: fermentation, ethanol distillation and purification, cooling, blending, and characterization of fuel specifications. Components of gasoline (RON 90)-ethanol-water formed a stable emulsion in the composition range of 28.00‒99.79 %, 0.20‒67.97 %, and 0.01‒3.58 %. The observation found that continually increasing the amount of aqueous ethanol and temperature after one phase was attained would not lead to the separation of components. Therefore, gasoline and aqueous ethanol can form a single phase functioning as a surfactant binding water and fossil fuel. The decrease in temperature after the emulsion is stabilized can separate the components whereby it is caused by the faster density change of aqueous ethanol than gasoline
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2694 (1)
Study of composition of the aqueous ethanol-kerosene in a single phase
Herein, a brief report of some new blended fuels, one-phase aqueous kerosene-alcohol mixtures, and their compositions is conducted. The procedures of the work were the preparation of ethanol, the separation of kerosene components employing a simple distillation, and the blending process. It was obtained that aqueous ethanol with concentrations of 94 - 98 % could be blended with kerosene to form a single phase. Before mixing, kerosene should be treated or separated thermally based on the boiling temperatures of the component. The process for blending the kerosene and ethanol is described. The compositions of the kerosene and aqueous ethanol blends are presented in the form of tables and triangular graphs. It was measured that the composition of kerosene, pure ethanol, and water in a stable emulsion was 1:4.68:0.19 (in V) in which kerosene was separated at temperature 192 – 198 °C and purity ethanol was 95 % compared to that 1:1.52:0.05 for ethanol 98 % with similar temperature range and the rest of compositions of different temperature range and ethanol concentrations are presented. By adding aqueous ethanol after a stable emulsion was reached, it did not occur a phase separation. Ethanol could be acting as a surfactant that bound the kerosene forming a single phase.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2694 (1)
Open AccessStudy of composition of the aqueous ethanol-kerosene in a single phase
Herein, a brief report of some new blended fuels, one-phase aqueous kerosene-alcohol mixtures, and their compositions is conducted. The procedures of the work were the preparation of ethanol, the separation of kerosene components employing a simple distillation, and the blending process. It was obtained that aqueous ethanol with concentrations of 94 - 98 % could be blended with kerosene to form a single phase. Before mixing, kerosene should be treated or separated thermally based on the boiling temperatures of the component. The process for blending the kerosene and ethanol is described. The compositions of the kerosene and aqueous ethanol blends are presented in the form of tables and triangular graphs. It was measured that the composition of kerosene, pure ethanol, and water in a stable emulsion was 1:4.68:0.19 (in V) in which kerosene was separated at temperature 192 – 198 °C and purity ethanol was 95 % compared to that 1:1.52:0.05 for ethanol 98 % with similar temperature range and the rest of compositions of different temperature range and ethanol concentrations are presented. By adding aqueous ethanol after a stable emulsion was reached, it did not occur a phase separation. Ethanol could be acting as a surfactant that bound the kerosene forming a single phase.