Analysis of compositions and fuel specifications of the aqueous emulsion fuels of gasoline (RON 90)-ethanol-water in stable emulsions at low temperatures
Authors:
- Hanny Frans SangianHSHanny Frans Sangian
- Guntur PasauGPGuntur Pasau
- Gerald Hendrik TamuntuanGTGerald Hendrik Tamuntuan
- Arief WidjajaAWArief Widjaja
- Ronny PurwadiRPRonny Purwadi
- Silvya Yusnica AgnestySASilvya Yusnica Agnesty
- Tun SrianaTSTun Sriana
- Arif NurrahmanANArif Nurrahman
- Abubakar TuhuloulaATAbubakar Tuhuloula
- Ramli ThahirRTRamli Thahir
Open Access
- 28 February 2023
- journal article
- research article
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (6 (121)) , 22-32
Abstract
Many countries worldwide encounter the greatest difficulties in improving people's life quality since fossil fuel reserves are decreasing, causing fuel prices to rise drastically. This problem has made many countries, including Indonesia, struggle to import them from producers in the Middle East. Adding a small part of ethanol to gasoline is one of the solutions that has been investigated and developed. The previous works relating to blended fuels, gasoline and ethanol, generally employed absolute alcohol, which was expensive. A small surfactant was added to the mixture to stabilize the emulsion, and the blending was conducted in normal conditions (room temperature). If the composition of gasoline and aqueous ethanol is not precise, the components can be separated at a specific temperature. The present study is aimed to report the analysis of compositions and fuel specifications of aqueous emulsions of gasoline (RON 90)-ethanol-water in a single phase without using a synthetic surfactant in the temperature range of 0–25 °C. The procedures were as follows: fermentation, ethanol distillation and purification, cooling, blending, and characterization of fuel specifications. Components of gasoline (RON 90)-ethanol-water formed a stable emulsion in the composition range of 28.00‒99.79 %, 0.20‒67.97 %, and 0.01‒3.58 %. The observation found that continually increasing the amount of aqueous ethanol and temperature after one phase was attained would not lead to the separation of components. Therefore, gasoline and aqueous ethanol can form a single phase functioning as a surfactant binding water and fossil fuel. The decrease in temperature after the emulsion is stabilized can separate the components whereby it is caused by the faster density change of aqueous ethanol than gasolineKeywords
This publication has 26 references indexed in Scilit:
- An analysis of speciated hydrocarbons in hydrous ethanol (H100) and ethanol-gasoline blend (E22) for vehicle exhaust emissionsAtmospheric Environment, 2022
- Incentives and strategies for financing the renewable energy transition: A reviewEnergy Reports, 2021
- Effect of cyclohexanol on phase stability and volatility behavior of hydrous ethanol-gasoline blendsEgyptian Journal of Petroleum, 2021
- Use of Span 80 and Tween 80 for blending gasoline and alcohol in spark ignition enginesEnergy Reports, 2019
- Effect of ethyl acetate addition on phase stability, octane number and volatility criteria of ethanol-gasoline blendsEgyptian Journal of Petroleum, 2018
- Influence of ethyl acetate addition on phase stability and fuel characteristics of hydrous ethanol-gasoline blendsEgyptian Journal of Petroleum, 2018
- Exhaust noise, performance and emission characteristics of spark ignition engine fuelled with pure gasoline and hydrous ethanol gasoline blendsCase Studies in Thermal Engineering, 2018
- An experimental study on premixed charge compression ignition-direct ignition engine fueled with ethanol and gasoholAlexandria Engineering Journal, 2015
- Energy, carbon dioxide and water use implications of hydrous ethanol productionEnergy Conversion and Management, 2015
- The effects of hydrous ethanol gasoline on combustion and emission characteristics of a port injection gasoline engineCase Studies in Thermal Engineering, 2015