APAlban Pothérat

Alban Pothérat

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alban Pothérat has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Phenomenology of laminar acoustic streaming jets

    by Bjarne Vincent, Daniel Henry, Abhishek Kumar, Valéry Botton, Alban Pothérat, Sophie Miralles

    This work identifies the physical mechanisms at play in the different flow regions along an Eckart acoustic streaming jet by means of numerical simulation based on a modeling of the driving acoustic force including attenuation effects. The flow is forced by an axisymmetric beam of progressive sound waves attenuating over a significant part of a closed cylindrical vessel where the jet is confined. We focus on the steady, axisymmetric, and laminar regime. The jet typically displays a strong acceleration close to the source before reaching a peak velocity. At further distances from the transducer, the on-axis jet velocity smoothly decays before reaching the opposite wall. For each of these flow regions along the jet, we derive scaling laws for the on-axis velocity with the magnitude of the acoustic force and the diffraction of the driving acoustic beam. These laws highlight the different flow regimes along the jet and establish a clear picture of its spatial structure, able to inform the design of experimental or industrial setups involving Eckart streaming jets.


  • Open Access

    Stability of acoustic streaming jets confined in cylindrical cavities

    by Bjarne Vincent, Abhishek Kumar, Daniel Henry, Sophie Miralles, Valery Botton, Alban Pothérat

    We study the stability of a steady Eckart streaming jet flowing in a closed cylindrical cavity. This configuration is a generic representation of industrial processes where driving flows in a cavity by means of acoustic forcing offers a contactless way of stirring or controlling flows. Successfully doing so, however, requires sufficient insight into the topology induced by the acoustic beam. This, in turn, raises the more fundamental question of whether the basic jet topology is stable and, when it is not, of the alternative states that end up being acoustically forced. To answer these questions, we consider a flow forced by an axisymmetric diffracting beam of attenuated sound waves emitted by a plane circular transducer at one cavity end. At the opposite end, the jet impingement drives recirculating structures spanning nearly the entire cavity radius. We rely on linear stability analysis (LSA) together with three-dimensional nonlinear simulations to identify the flow destabilisation mechanisms and to determine the bifurcation criticalities. We show that flow destabilisation is closely related to the impingement-driven recirculating structures, and that the ratio $C_R$ between the cavity and the maximum beam radii plays a key role on the flow stability. In total, we identified four mode types destabilising the flow. For $4 \leqslant C_R \leqslant 6$ , a non-oscillatory perturbation rooted in the jet impingement triggers a supercritical bifurcation. For $C_R = 3$ , the flow destabilises through a subcritical non-oscillatory bifurcation and we explain the topological change of the unstable perturbation by analysing its critical points. Further reducing $C_R$ increases the shear within the flow and gradually moves the instability origin to the shear layer between impingement-induced vortices: for $C_R = 2$ , an unstable travelling wave grows out of a subcritical bifurcation, which becomes supercritical for $C_R=1$ . For each geometry, the nonlinear three-dimensional (3-D) simulations confirm both the topology and the growth rate of the unstable perturbation returned by LSA. This study offers fundamental insight into the stability of acoustically driven flows in general, but also opens possible pathways to either induce turbulence acoustically or to avoid it in realistic configurations.


    • 20 October 2025
    • Published by HAL in HAL
    Open Access

    Stability of acoustic streaming jets confined in cylindrical cavities

    by Bjarne Vincent, Abhishek Kumar, Daniel Henry, Sophie Miralles, Valéry Botton, Alban Pothérat

    We study the stability of a steady Eckart streaming jet flowing in a closed cylindrical cavity. This configuration is a generic representation of industrial processes where driving flows in cavity by means of acoustic forcing offers a contactless way of stirring or controling flows. Successfully doing so however requires sufficient insight into the topology induced by the acoustic beam. This, in turn, raises the more fundamental question of whether the basic jet topology is stable and, when it is not, of the alternative states that end up being acoustically forced. To answer these questions we consider a flow forced by an axisymmetric diffracting beam of attenuated sound waves emitted by a plane circular transducer at one cavity end. At the opposite end, the jet impingement drives recirculating structures spanning nearly the entire cavity radius. We rely on Linear Stability Analysis (LSA) together with three-dimensional nonlinear simulations to identify the flow destabilisation mechanisms and to determine the bifurcation criticalities. We show that flow destabilisation is closely related to the impingement-driven recirculating structures, and that the ratio CR between the cavity and the maximum beam radii plays a key role on the flow stability. In total, we identified four mode types destabilising the flow. For 4 ⩽ CR ⩽ 6, a non-oscillatory perturbation rooted in the jet impingement triggers a supercritical bifurcation. For CR = 3, the flow destabilises through a subcritical non-oscillatory bifurcation, and we explain the topological change of the unstable perturbation by analysing its critical points. Further reducing CR increases the shear within the flow, and gradually moves the instability origin to the shear layer between impingement-induced vortices: for CR = 2, an unstable travelling wave grows out of a subcritical bifurcation, which becomes supercritical for CR = 1. For each geometry, the nonlinear 3D simulations confirm both the topology and the growth rate of the unstable perturbation returned by LSA. This study offers fundamental insight into the stability of acoustically-driven flows in general but also opens possible pathways to either induce turbulence acoustically, or to avoid it in realistic configurations.

  • Open Access

    Suppressing instabilities in mixed baroclinic flow using an actuation based on receptivity

    by Abhishek Kumar, Alban Pothérat

    This paper presents a method to stabilise oscillations occurring in a mixed convective flow in a nearly hemispherical cavity, using actuation based on the receptivity map of the unstable mode. This configuration models the continuous casting of metallic alloys, where hot liquid metal is poured at the top of a hot sump with cold walls pulled in a solid phase at the bottom. The model focuses on the underlying fundamental thermohydrodynamic processes without dealing with the complexity inherent to the real configuration. This flow exhibits three branches of instability. The solution of the adjoint eigenvalue problem for the convective flow equations reveals that the regions of highest receptivity for unstable modes of each branch concentrate near the inflow upper surface. Simulations of the linearised governing equations show that a thermomechanical actuation modelled on the adjoint eigenmode asymptotically suppresses the unstable mode. If the actuation’s amplitude is kept constant in time, which is easier to implement in an industrial environment, the suppression is still effective but only over a finite time, after which it becomes destabilising. Based on this phenomenology, we apply the same actuation during the stabilising phase only in the nonlinear evolution of the unstable mode. It turns out stabilisation persists, even when the unstable mode is left to evolve freely after the actuation period. These results not only demonstrate the effectiveness of receptivity-informed actuation in stabilising convective oscillations but also suggest a simple strategy for their long-term control.


  • Open Access

    Pulsatility delays the transition to sustained turbulence in quasi-two-dimensional shear flows

    by Christopher J. Camobreco, Alban Pothérat, Gregory J. Sheard

    This work investigates efficient routes to turbulence in quasi-two-dimensional shear flows. Two-dimensional disturbances require high Reynolds numbers to incite transition from a steady base flow, as transient growth is modest. With the addition of an oscillatory base flow component, this work shows that the transient growth experienced by two-dimensional initial perturbations is often well above that provided by the steady component. However, as has been shown for three-dimensional flows [Pier & Schmid J. Fluid Mech. 926, A11 (2021)], the transient growth is almost entirely composed of modal intracyclic growth, rather than a transient mechanism which takes advantage of non-normality. This lack of transient growth, relative to the severe decay induced by the favorable pressure gradient during the acceleration phase of the oscillatory base flow, only ever delays the transition to sustained turbulence. Thus, a non-oscillatory driving force remains the most efficient strategy for sustained turbulence in quasi-two-dimensional shear flows. The only benefit provided by pulsatility is that the amplitude of the initial condition required to trigger intermittent turbulence is orders of magnitude smaller.

  • Open Access

    Detecting Turbulent Patterns in Particulate Pipe Flow by Streak Angle Visualization

    by Rishav Raj, Abhiram Thiruthummal, Alban Pothérat

    Detecting the transition from laminar to turbulent flow in particulate pipe systems remains a complex issue in fluid dynamics, often requiring sophisticated and costly experimental apparatus. This research presents an innovative streak visualization method designed to offer a simple and robust approach to identify transitional turbulent patterns in particulate pipe flows with neutrally buoyant particles. The technique employs a laser arrangement and a low-cost camera setup to capture particle-generated streaks within the fluid, enabling real-time observation of flow patterns. Validation of the proposed method was conducted through comparison with established techniques like Particle Image Velocimetry (PIV) and pressure drop measurements, confirming its accuracy and reliability. Experiments demonstrate the streak visualization method’s capacity to differentiate between laminar, transitional, and turbulent flow regimes by analyzing the standard deviation of streak angles. The method is especially efficient at low particle concentration, ie precisely where other more established methods become less effective. Furthermore, this technique enables us to identify a critical Reynolds number using Kullback-Leibler divergence built on the statistical distribution of streak angles, which is consistent with previous studies. Because of it is effective at low concentrations and robust, this streak visualization technique opens new perspectives for the characterization of particulate pipe flows not only in the confines of the laboratory, but also in less controlled industrial multi-phase flows where determining the laminar or turbulent nature of the flow is a prerequisite for flowmeter calibration.

  • Open Access

    Alfvén waves at low magnetic Reynolds number: transitions between diffusion, dispersive Alfvén waves and nonlinear propagation

    by Samy Lalloz, Laurent Davoust, François Debray, Alban Pothérat

    We seek the conditions in which Alfvén waves (AW) can be produced in laboratory-scale liquid metal experiments, i.e. at low magnetic Reynolds Number ( $Rm$ ). Alfvén waves are incompressible waves propagating along magnetic fields typically found in geophysical and astrophysical systems. Despite the high values of $Rm$ in these flows, AW can undergo high dissipation in thin regions, for example in the solar corona where anomalous heating occurs (Davila, Astrophys. J., vol. 317, 1987, p. 514; Singh & Subramanian, Sol. Phys., vol. 243, 2007, pp. 163–169). Understanding how AW dissipate energy and studying their nonlinear regime in controlled laboratory conditions may thus offer a convenient alternative to observations to understand these mechanisms at a fundamental level. Until now, however, only linear waves have been experimentally produced in liquid metals because of the large magnetic dissipation they undergo when $Rm\ll 1$ and the conditions of their existence at low $Rm$ are not understood. To address these questions, we force AW with an alternating electric current in a liquid metal in a transverse magnetic field. We provide the first mathematical derivation of a wave-bearing extension of the usual low- $Rm$ magnetohydrodynamics (MHD) approximation to identify two linear regimes: the purely diffusive regime exists when $N_{\omega }$ , the ratio of the oscillation period to the time scale of diffusive two-dimensionalisation by the Lorentz force, is small; the propagative regime is governed by the ratio of the forcing period to the AW propagation time scale, which we call the Jameson number $Ja$ after (Jameson, J. Fluid Mech., vol. 19, issue 4, 1964, pp. 513–527). In this regime, AW are dissipative and dispersive as they propagate more slowly where transverse velocity gradients are higher. Both regimes are recovered in the FlowCube experiment (Pothérat & Klein, J. Fluid Mech., vol. 761, 2014, pp. 168–205), in excellent agreement with the model up to $Ja \lesssim 0.85$ but near the $Ja=1$ resonance, high amplitude waves become clearly nonlinear. Hence, in electrically driving AW, we identified the purely diffusive MHD regime, the regime where linear, dispersive AW propagate, and the regime of nonlinear propagation.


  • Open Access

    Detecting Turbulent Patterns in Particulate Pipe Flow by Streak Angle Visualization

    by Rishav Raj, Abhiram Thiruthummal, Alban Potherat

    Detecting the transition from laminar to turbulent flow in particulate pipe systems remains a complex issue in fluid dynamics, often requiring sophisticated and costly experimental apparatus. This research presents an innovative streak visualization method designed to offer a simple and robust approach to identify transitional turbulent patterns in particulate pipe flows with neutrally buoyant particles. The technique employs a laser arrangement and a low-cost camera setup to capture particle-generated streaks within the fluid, enabling real-time observation of flow patterns. Validation of the proposed method was conducted through comparison with established techniques like Particle Image Velocimetry (PIV) and pressure drop measurements, confirming its accuracy and reliability. Experiments demonstrate the streak visualization method's capacity to differentiate between laminar, transitional, and turbulent flow regimes by analyzing the standard deviation of streak angles. The method is especially efficient at low particle concentration, ie precisely where other more established methods become less effective. Furthermore, this technique enables us to identify a critical Reynolds number using Kullback-Leibler divergence built on the statistical distribution of streak angles, which is consistent with previous studies. Because it is effective at low concentrations and robust, this streak visualization technique opens new perspectives for the characterization of particulate pipe flows not only in the confines of the laboratory but also in less controlled industrial multi-phase flows where determining the laminar or turbulent nature of the flow is a prerequisite for flowmeter calibration.