CCChristopher J. Camobreco

Christopher J. Camobreco

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Christopher J. Camobreco has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Why do only some riblets promote spanwise rollers?

    by Christopher J. Camobreco, Sebastian Endrikat, Ricardo García-Mayoral, Mitul Luhar, Daniel Chung

    Linear-stability modelling suggests that all sufficiently large riblets promote maximally growing spanwise rollers (García-Mayoral & Jiménez 2011 J. Fluid Mech. vol. 678, 317–347), yet direct numerical simulations (DNS) have shown that this is not the case (Endrikat et al. 2021 J. Fluid Mech. vol. 913, A37) some riblet shapes do not form spanwise rollers at all. Thus, the drag-reduction breakdown across all riblet shapes cannot be solely attributed to maximally growing spanwise rollers, prompting a reappraisal of the modelling. In this paper, comparing DNS data with riblet-resolving linear-stability predictions shows that the spanwise rollers are actually marginal modes, not maximally growing instabilities. This riblet-resolved linear analysis also predicts that not all riblet shapes promote spanwise rollers, in agreement with DNS, and unlike earlier linear-stability modelling, which relied on a one-dimensional (1-D) mean flow and on an over-simplified effective wall-admittance boundary condition. These riblet-resolved calculations further inform how to capture the effect of the riblet shape in a 1D model. Once captured, predictions with an effective boundary condition match riblet-resolved results, but still do not indicate what features of the riblet geometry promote the roller instability. Thus, the wall admittance is measured near the riblet crests, in both the riblet-resolved linear analysis and DNS, to show that the in-groove dynamics is dominated by a balance between the overlying pressure and unsteady inertia, and not viscous diffusion, as previously assumed. This pressure–unsteady-inertia balance sets the linear scaling of the wall admittance with riblet size, as observed in DNS, and is a key factor in setting the streamwise wavelength of the spanwise rollers. Furthermore, modelling this pressure–unsteady-inertia balance in the wall admittance reveals the role of riblet slenderness in promoting spanwise rollers, which provides the missing link in previous correlations between the riblet geometry and the presence or lack of rollers.


  • Open Access

    Pulsatility delays the transition to sustained turbulence in quasi-two-dimensional shear flows

    by Christopher J. Camobreco, Alban Pothérat, Gregory J. Sheard

    This work investigates efficient routes to turbulence in quasi-two-dimensional shear flows. Two-dimensional disturbances require high Reynolds numbers to incite transition from a steady base flow, as transient growth is modest. With the addition of an oscillatory base flow component, this work shows that the transient growth experienced by two-dimensional initial perturbations is often well above that provided by the steady component. However, as has been shown for three-dimensional flows [Pier & Schmid J. Fluid Mech. 926, A11 (2021)], the transient growth is almost entirely composed of modal intracyclic growth, rather than a transient mechanism which takes advantage of non-normality. This lack of transient growth, relative to the severe decay induced by the favorable pressure gradient during the acceleration phase of the oscillatory base flow, only ever delays the transition to sustained turbulence. Thus, a non-oscillatory driving force remains the most efficient strategy for sustained turbulence in quasi-two-dimensional shear flows. The only benefit provided by pulsatility is that the amplitude of the initial condition required to trigger intermittent turbulence is orders of magnitude smaller.

  • Open Access

    A viscous vortex model for predicting the drag reduction of riblet surfaces

    by J. Wong, C.J. Camobreco, R. García-Mayoral, N. Hutchins, D. Chung

    This paper introduces a viscous vortex model for predicting the optimal drag reduction of riblet surfaces, eliminating the need for expensive direct numerical simulations (DNSs) or experiments. The footprint of a typical quasi-streamwise vortex, in terms of the spanwise and wall-normal velocities, is extracted from smooth-wall DNS flow fields in close proximity to the surface. The extracted velocities are then averaged and used as boundary conditions in a Stokes-flow problem, wherein riblets with various cross-sectional shapes are embedded. Here, the same smooth-wall-based boundary conditions can be used for riblets, as we observe from the DNSs that the quasi-streamwise vortices remain unmodified apart from an offset. In particular, the position of these vortices remain unpinned above small riblets. The present approach is compared with the protrusion-height model of Luchini et al. (J. Fluid Mech., vol. 228, 1991, pp. 87–109), which is also based on a Stokes calculation, but represents the vortex with only a uniform spanwise velocity boundary condition. The key novelty of the present model is the introduction of a wall-normal velocity component into the boundary condition, thus inducing transpiration at the riblet crests, which becomes relevant as the riblet size increases. Consequently, the present model allows for the drag-reduction prediction of riblets up to the optimal size. The present approach does not rely on the scale separation formally required by homogenisation techniques, which are only applicable for vanishingly small riblets.


  • Open Access

    Subcritical transition to turbulence in quasi-two-dimensional shear flows

    by Christopher J. Camobreco, Alban Pothérat, Gregory J. Sheard

    The transition to turbulence in conduits is among the longest-standing problems in fluid mechanics. Challenges in producing or saving energy hinge on understanding promotion or suppression of turbulence. While a global picture based on an intrinsically 3-D subcritical mechanism is emerging for 3-D turbulence, subcritical turbulence is yet to even be observed when flows approach two dimensions, e.g. under intense rotation or magnetic fields. Here, stability analysis and direct numerical simulations demonstrate a subcritical quasi-two-dimensional (quasi-2-D) transition from laminar flow to turbulence, via a radically different 2-D mechanism to the 3-D case, driven by nonlinear Tollmien–Schlichting waves. This alternative scenario calls for a new line of thought on the transition to turbulence and should inspire new strategies to control transition in rotating devices and nuclear fusion reactor blankets.


  • Stability of pulsatile quasi-two-dimensional duct flows under a transverse magnetic field

    by Christopher J. Camobreco, Alban Pothérat, Gregory J. Sheard

    The stability of a pulsatile quasi-two-dimensional duct flow was numerically investigated. Flow was driven, in concert, by a constant pressure gradient and by the synchronous oscillation of the lateral walls. This prototypical setup serves to aid understanding of unsteady magnetohydrodynamic flows in liquid metal coolant ducts subjected to transverse magnetic fields, motivated by the conditions expected in magnetic confinement fusion reactors. A wide range of wall oscillation frequencies and amplitudes, relative to the constant pressure gradient, were simulated. Focus was placed on the driving pulsation optimized for the greatest reduction in the critical Reynolds number for a range of friction parameters H (proportional to magnetic field strength). An almost 70% reduction in the critical Reynolds number, relative to that for the steady base flow, was obtained toward the hydrodynamic limit (H=10−7), while just over a 90% reduction was obtained by H=10. For all oscillation amplitudes, increasing H consistently led to an increasing percentage reduction in the critical Reynolds number. This is a promising result, given fusion relevant conditions of H≥104. These reductions were obtained by selecting a frequency that both ensures prominent inflection points are maintained in the base flow and a growth in perturbation energy in phase with the deceleration of the base flow. Nonlinear simulations of perturbations driven at the optimized frequency and amplitude still satisfied the no net growth condition at the greatly reduced critical Reynolds numbers. However, two complications were introduced by nonlinearity. First, although the linear mode undergoes a symmetry-breaking process, turbulence was not triggered. Second, a streamwise invariant sheet of negative velocity formed, able to arrest the linear decay of the perturbation. Although the nonlinearly modulated base flow maintained a higher time-averaged energy, it also stabilized the flow, with exponential growth not observed at supercritical Reynolds numbers.


  • Transition to turbulence in quasi-two-dimensional MHD flow driven by lateral walls

    by Christopher J. Camobreco, Alban Pothérat, Gregory J. Sheard

    This work investigates the mechanisms that underlie transitions to turbulence in a three-dimensional domain in which the variation of flow quantities in the out-of-plane direction is much weaker than any in-plane variation. This is achieved using a model for the quasi-two-dimensional magnetohydrodynamic flow in a duct with moving lateral walls and an orthogonal magnetic field, where three dimensionality persists only in regions of asymptotically small thickness. In this environment, conventional subcritical routes to turbulence, which are highly three dimensional (with large variations from nonzero out-of-plane wave numbers), are prohibited. To elucidate the remaining mechanisms involved in quasi-two-dimensional turbulent transitions, the magnetic field strength and degree of antisymmetry in the base flow are varied, the latter via the relative motion of the lateral duct walls. Introduction of any amount of antisymmetry to the base flow drives the critical Reynolds number infinite, as the Tollmien-Schlichting instabilities take on opposite signs of rotation and destructively interfere. However, an increasing magnetic field strength isolates the instabilities, which, without interaction, permits finite critical Reynolds numbers. The transient growth obtained by similar Tollmien-Schlichting wave perturbations only mildly depends on the base flow, with negligible differences in growth rate for friction parameters H≳30. Weakly nonlinear analysis determines the local bifurcation type, which is always subcritical at the critical point, and along the entire neutral curve just before the magnetic field strength becomes too low to maintain finite critical Reynolds numbers. Direct numerical simulations, initiated with random noise, indicate that a subcritical bifurcation is difficult to achieve in practice, with only supercritical behavior observed. For H≤1, supercritical exponential growth leads to saturation but not turbulence. For higher 3≤H≤10, a turbulent transition occurs and is maintained at H=10. For H≥30, the turbulent transition still occurs, but is short lived, as the turbulent state quickly collapses. In addition, for H≥3, an inertial subrange is identified, with the perturbation energy exhibiting a −5/3 power law dependence on wave number.


  • Subcritical route to turbulence via the Orr mechanism in a quasi-two-dimensional boundary layer

    by Christopher J. Camobreco, Alban Pothérat, Gregory J. Sheard

    A subcritical route to turbulence via purely quasi-two-dimensional mechanisms, for a quasi-two-dimensional system composed of an isolated exponential boundary layer, is numerically investigated. Exponential boundary layers are highly stable and are expected to form on the walls of liquid metal coolant ducts within magnetic confinement fusion reactors. Subcritical transitions were detected only at weakly subcritical Reynolds numbers (at most ≈70% below critical). Furthermore, the likelihood of transition was very sensitive to both the perturbation structure and initial energy. Only the quasi-two-dimensional Tollmien–Schlichting wave disturbance, attained by either linear or nonlinear optimization, was able to initiate the transition process, by means of the Orr mechanism. The lower initial energy bound sufficient to trigger transition was found to be independent of the domain length. However, longer domains were able to increase the upper energy bound, via the merging of repetitions of the Tollmien–Schlichting wave. This broadens the range of initial energies able to exhibit transitional behavior. Although the eventual relaminarization of all turbulent states was observed, this was also greatly delayed in longer domains. The maximum nonlinear gains achieved were orders of magnitude larger than the maximum linear gains (with the same initial perturbations), regardless if the initial energy was above or below the lower energy bound. Nonlinearity provided a second stage of energy growth by an arching of the conventional Tollmien–Schlichting wave structure. A streamwise independent structure, able to efficiently store perturbation energy, also formed.


  • Open Access

    Subcritical route to turbulence via the Orr mechanism in a quasi-two-dimensional boundary layer

    by Christopher J. Camobreco, Alban Pothérat, Gregory J. Sheard

    The link to the online abstract of this manuscript, accepted in Phys. Rev. Fluids, is https://journals.aps.org/prfluids/accepted/32074S4aH8b1c608e19768b42571f9001086a3f44. A subcritical route to turbulence via purely quasi-two-dimensional mechanisms, for a quasi-two-dimensional system composed of an isolated exponential boundary layer, is numerically investigated. Exponential boundary layers are highly stable, and are expected to form on the walls of liquid metal coolant ducts within magnetic confinement fusion reactors. Subcritical transitions were detected only at weakly subcritical Reynolds numbers (at most $\approx 70$% below critical). Furthermore, the likelihood of transition was very sensitive to both the perturbation structure and initial energy. Only the quasi-two-dimensional Tollmien-Schlichting wave disturbance, attained by either linear or nonlinear optimisation, was able to initiate the transition process, by means of the Orr mechanism. The lower initial energy bound sufficient to trigger transition was found to be independent of the domain length. However, longer domains were able to increase the upper energy bound, via the merging of repetitions of the Tollmien-Schlichting wave. This broadens the range of initial energies able to exhibit transitional behaviour. Although the eventual relaminarization of all turbulent states was observed, this was also greatly delayed in longer domains. The maximum nonlinear gains achieved were orders of magnitude larger than the maximum linear gains (with the same initial perturbations), regardless if the initial energy was above or below the lower energy bound. Nonlinearity provided a second stage of energy growth by an arching of the conventional Tollmien-Schlichting wave structure. A streamwise independent structure, able to efficiently store perturbation energy, also formed.