José Rino Neto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
José Rino Neto has a total of 181 co-authors. Here are the top co-authors by number of shared publications:
- João Batista de Paiva
Department of Orthodontics, Faculty of Dentistry, University of São Paulo, São Paulo, Brazil
19 shared publications João Batista de Paiva
Faculty of Dentistry, University of São Paulo, avenue Professor Lineu Prestes, 2227 Cidade Universitári, 05508000 São Paulo, Brazil
13 shared publications- Karine Evangelista
Universidade Federal de Goiás, Brazil
11 shared publications - Maria Alves Garcia Silva
Universidade Federal de Goiás, Brazil
9 shared publications - Gilberto Vilanova Queiroz
PhD in Orthodontics, University of São Paulo (FOUSP), São Paulo, Brazil
5 shared publications - Lucia Helena Soares Cevidanes
Cevidanes, Department of Orthodontics , University of North carolina , USA
5 shared publications
Latest Publications
- 13 November 2026
- Published by Wiley in European Journal of Dental Education
Perception of Dental Students on a Remote and Asynchronous Course on Evidence‐Based Practice. A Qualitative Study
Background: Considering the influence of the public health context on current teaching modalities and the importance of teaching Evidence‐Based Dentistry (EBD) to undergraduates. Objective: This study aimed to qualitatively assess the perceptions and opinions of dental students enrolled in a remote and asynchronous EBD course at the School of Dentistry of Ribeirão Preto, University of São Paulo, Brazil. Methods: Individual remote interviews were conducted and analysed using the Framework Analysis method. Results: Six major themes emerged: motivations for enrolling, expectations regarding professional impact, perceived gains in knowledge and skills, impressions of the remote format, barriers to learning and suggestions for improvement. Based on students' reports, the course was perceived to expand their understanding of EBD concepts, encourage critical thinking and promote greater autonomy and proactivity in learning. Although they valued the flexibility and technical advantages of the asynchronous format, they also highlighted reduced interaction with instructors and peers as a limitation. Conclusion: The course appeared to achieve its intended goals, as students noted the development of both theoretical knowledge and practical EBD skills. The participants identified the emergence of a self‐reported autonomous and critical attitude toward scientific evidence, even though it was not objectively tested. It is therefore suggested that future editions of the course adopt a hybrid or integrated format, combining flexibility with opportunities for in‐person discussion and collaboration, in order to maximise engagement and learning outcomes.
- 13 November 2026
- Published by Wiley in European Journal of Dental Education
Perception of Dental Students on a Remote and Asynchronous Course on Evidence‐Based Practice. A Qualitative Study
Background: Considering the influence of the public health context on current teaching modalities and the importance of teaching Evidence‐Based Dentistry (EBD) to undergraduates. Objective: This study aimed to qualitatively assess the perceptions and opinions of dental students enrolled in a remote and asynchronous EBD course at the School of Dentistry of Ribeirão Preto, University of São Paulo, Brazil. Methods: Individual remote interviews were conducted and analysed using the Framework Analysis method. Results: Six major themes emerged: motivations for enrolling, expectations regarding professional impact, perceived gains in knowledge and skills, impressions of the remote format, barriers to learning and suggestions for improvement. Based on students' reports, the course was perceived to expand their understanding of EBD concepts, encourage critical thinking and promote greater autonomy and proactivity in learning. Although they valued the flexibility and technical advantages of the asynchronous format, they also highlighted reduced interaction with instructors and peers as a limitation. Conclusion: The course appeared to achieve its intended goals, as students noted the development of both theoretical knowledge and practical EBD skills. The participants identified the emergence of a self‐reported autonomous and critical attitude toward scientific evidence, even though it was not objectively tested. It is therefore suggested that future editions of the course adopt a hybrid or integrated format, combining flexibility with opportunities for in‐person discussion and collaboration, in order to maximise engagement and learning outcomes.
- 12 June 2025
- Published by Oxford University Press (OUP) in European Journal of Orthodontics
- Vol. 47 (4)
Orthognathic surgery–induced bone remodeling and the acceleration of orthodontic tooth movement: a scoping review
Background: Accelerated tooth movement after orthognathic surgery has been observed in clinical settings and referenced in the literature. Objective: To map the existing literature on whether orthodontic tooth movement is accelerated by reactive bone remodeling after orthognathic surgery. Search methods: A scoping literature review of human and animal studies was conducted. Unrestricted searches in six electronic databases and gray literature sources were performed and updated in January 2025. A manual search of the reference list was also undertaken. Selection criteria: We searched for primary studies assessing the rate of tooth movement (primary outcome) or change in bone remodeling or bone density (secondary outcomes) in patients who underwent orthognathic surgery or in animals subjected to major jaw osteotomy. Data collection and analysis: Two independent reviewers selected studies and extracted data, with a third reviewer consulted if needed. Results: Out of 8296 identified records, eight studies published between 2008 and 2021 were included. In the animal model (n = 4), significant individual variation was noted in the rate of tooth movement following osteotomies. In humans (n = 4), metabolic changes in bone markers and a decreased alveolar bone density were recognized. Limitations: The results of the present scoping review are based mainly on human secondary outcomes. Conclusions and implications: Increased cellular and molecular activity following orthognathic surgery or major jaw osteotomy has been demonstrated in human and animal models. This biological response is associated with the systemic acceleratory phenomenon and regional acceleratory phenomenon triggered by the extent of surgical trauma. At the local level, these changes involve enhanced bone remodeling activity accompanied by a transient reduction in bone mineral density. Most available evidence in humans suggests that these effects are temporary, typically peaking within the first month post-surgery and diminishing within three months. However, definitive evidence supporting a clinically significant acceleration of orthodontic tooth movement in humans remains limited, with current understanding primarily based on robust animal studies. While the primary outcome could not be demonstrated in humans and warrants further investigation, the potential for optimizing the efficiency of post-surgical orthodontic treatment should not be overlooked. Registration: Open Science Framework (10.17605/OSF.IO/CWGA3) Funding: The present study has not received any contributions from private or public funding agencies. The National Council for Scientific and Technological Development (CNPq) supports Professor Graziela De Luca Canto.
- 12 June 2025
- Published by Oxford University Press (OUP) in European Journal of Orthodontics
- Vol. 47 (4)
Orthognathic surgery–induced bone remodeling and the acceleration of orthodontic tooth movement: a scoping review
Background: Accelerated tooth movement after orthognathic surgery has been observed in clinical settings and referenced in the literature. Objective: To map the existing literature on whether orthodontic tooth movement is accelerated by reactive bone remodeling after orthognathic surgery. Search methods: A scoping literature review of human and animal studies was conducted. Unrestricted searches in six electronic databases and gray literature sources were performed and updated in January 2025. A manual search of the reference list was also undertaken. Selection criteria: We searched for primary studies assessing the rate of tooth movement (primary outcome) or change in bone remodeling or bone density (secondary outcomes) in patients who underwent orthognathic surgery or in animals subjected to major jaw osteotomy. Data collection and analysis: Two independent reviewers selected studies and extracted data, with a third reviewer consulted if needed. Results: Out of 8296 identified records, eight studies published between 2008 and 2021 were included. In the animal model (n = 4), significant individual variation was noted in the rate of tooth movement following osteotomies. In humans (n = 4), metabolic changes in bone markers and a decreased alveolar bone density were recognized. Limitations: The results of the present scoping review are based mainly on human secondary outcomes. Conclusions and implications: Increased cellular and molecular activity following orthognathic surgery or major jaw osteotomy has been demonstrated in human and animal models. This biological response is associated with the systemic acceleratory phenomenon and regional acceleratory phenomenon triggered by the extent of surgical trauma. At the local level, these changes involve enhanced bone remodeling activity accompanied by a transient reduction in bone mineral density. Most available evidence in humans suggests that these effects are temporary, typically peaking within the first month post-surgery and diminishing within three months. However, definitive evidence supporting a clinically significant acceleration of orthodontic tooth movement in humans remains limited, with current understanding primarily based on robust animal studies. While the primary outcome could not be demonstrated in humans and warrants further investigation, the potential for optimizing the efficiency of post-surgical orthodontic treatment should not be overlooked. Registration: Open Science Framework (10.17605/OSF.IO/CWGA3) Funding: The present study has not received any contributions from private or public funding agencies. The National Council for Scientific and Technological Development (CNPq) supports Professor Graziela De Luca Canto.
- Open Access
- 30 April 2025
- Published by Sociedad Argentina de Investigacion Odontologica in Acta Odontológica Latinoamericana
- Vol. 38 (1) , 20-28
Variation in mandibular canal position in different sagittal skeletal patterns: a CBCT study
The mandible presents morphological variations, even in individuals without syndromes. This variability will determine different skeletal sagittal patterns, generally classified as Class I, II or III. The anatomical position of the mandibular canal has been investigated in different skeletal patterns, often using cone-beam computed tomography (CBCT) images, for diagnostic or surgical planning purposes. Aim: The aim of this study is to perform a three-dimensional analysis of the position of the mandibular canal (MC) in adults with Class I, II and III skeletal patterns, by means of segmentation and 3D measurements on CBCT images. Materials and Method: 75 CBCT images were obtained from a secondary database, and 3D analysis was performed using ITK-SNAP and 3D Slicer software. The 3D evaluation consisted of determining the orientation of the position of the mandible, segmentation of the mandible and the MC, creating 3D models, and establishing anatomical landmarks. Vertical (supero-inferior, SI), transverse (mediolateral, RL,) and 3D measurements were performed. Results: The position of the MC is modified according to the skeletal pattern and by morphological factors of the mandible such as sex and gonial angle. The proximity of the MC to the oblique line is smaller in the SI direction in Class III, and the position of the MC is associated with variation in the gonial angle. It may be closer to the cortical lingual in the central region. Conclusion: The mandibular canal position should be considered in tomographic evaluation during diagnosis and therapeutic planning of mandible surgeries, especially in cases of sagittal ramus osteotomy.
- 30 April 2025
- Published by Sociedad Argentina de Investigacion Odontologica in Acta Odontológica Latinoamericana
- Vol. 38 (1) , 20-28
Open AccessVariation in mandibular canal position in different sagittal skeletal patterns: a CBCT study
The mandible presents morphological variations, even in individuals without syndromes. This variability will determine different skeletal sagittal patterns, generally classified as Class I, II or III. The anatomical position of the mandibular canal has been investigated in different skeletal patterns, often using cone-beam computed tomography (CBCT) images, for diagnostic or surgical planning purposes. Aim: The aim of this study is to perform a three-dimensional analysis of the position of the mandibular canal (MC) in adults with Class I, II and III skeletal patterns, by means of segmentation and 3D measurements on CBCT images. Materials and Method: 75 CBCT images were obtained from a secondary database, and 3D analysis was performed using ITK-SNAP and 3D Slicer software. The 3D evaluation consisted of determining the orientation of the position of the mandible, segmentation of the mandible and the MC, creating 3D models, and establishing anatomical landmarks. Vertical (supero-inferior, SI), transverse (mediolateral, RL,) and 3D measurements were performed. Results: The position of the MC is modified according to the skeletal pattern and by morphological factors of the mandible such as sex and gonial angle. The proximity of the MC to the oblique line is smaller in the SI direction in Class III, and the position of the MC is associated with variation in the gonial angle. It may be closer to the cortical lingual in the central region. Conclusion: The mandibular canal position should be considered in tomographic evaluation during diagnosis and therapeutic planning of mandible surgeries, especially in cases of sagittal ramus osteotomy.
- 14 March 2025
- Published by Elsevier in Journal of Dentistry
- Vol. 156, 105689
Explainable artificial intelligence to quantify adenoid hypertrophy-related upper airway obstruction using 3D Shape Analysis
- 14 March 2025
- Published by Elsevier in Journal of Dentistry
- Vol. 156, 105689
Explainable artificial intelligence to quantify adenoid hypertrophy-related upper airway obstruction using 3D Shape Analysis
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 30 (2) , e252486
Cone-beam computed tomography prescription by Brazilian orthodontists
Objective: To investigate the factors that influence Cone-beam computed tomography (CBCT) imaging prescription in Brazilian orthodontics practice.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 30 (2) , e252486
Open AccessCone-beam computed tomography prescription by Brazilian orthodontists
Objective: To investigate the factors that influence Cone-beam computed tomography (CBCT) imaging prescription in Brazilian orthodontics practice.
- 24 October 2024
- Published by Springer Nature in Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie
- Vol. 87 (1) , 74-82
Effect of time between archwire changes on intended dentoalveolar expansion in orthodontic patients treated with fixed appliances
Objective To analyze the effects of the time span between archwire changes on the amount of transverse dental arch expansion. The design was a prospective, controlled clinical trial. Randomization was performed by computer-generated allocation tables. Methods In all, 35 patients were evaluated in three groups treated with fixed appliances and the same four sequential leveling archwires, however, with different replacement periods: 28 days (4-week [4W] group), 56 days (8-week [8W] group), and 84 days (12-week [12W] group). Digital models were measured before the treatment (T0) and at the end of the evaluation period (T1) by a blinded operator with OrthoAnalyzer® software (3-Shape, Copenhagen, Denmark) and compared using MANOVA. A multiple linear regression was also used to evaluate the influences of age, initial dental crowding, incisor inclination, and facial pattern on the amount of expansion. Results Mean expansion was 2.77 ± 0.84 mm (upper arch) and 3.12 ± 0.88 mm (lower arch) in the 12W group; 1.96 ± 0.82 mm and 2.27 ± 0.96 mm in the 8W group, and 1.11 ± 0.93 mm and 1.32 ± 0.91 mm in the 4W group, respectively for the upper and lower arches. The amount of expansion varied significantly between the groups in the area of the canines, first premolars, and second premolars for both arches. Expansion was less in older patients. Initial dental crowding, incisor inclination and facial pattern had no influence on dental expansion. Conclusion Longer time spans between archwire changes provided greater amounts of expansion, while age is inversely related, with younger patients expressing greater amounts of expansion. The results also suggest that the expansion provided by the fixed appliances is expressed mainly in the canine and premolar areas.
- 24 October 2024
- Published by Springer Nature in Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie
- Vol. 87 (1) , 74-82
Effect of time between archwire changes on intended dentoalveolar expansion in orthodontic patients treated with fixed appliances
Objective To analyze the effects of the time span between archwire changes on the amount of transverse dental arch expansion. The design was a prospective, controlled clinical trial. Randomization was performed by computer-generated allocation tables. Methods In all, 35 patients were evaluated in three groups treated with fixed appliances and the same four sequential leveling archwires, however, with different replacement periods: 28 days (4-week [4W] group), 56 days (8-week [8W] group), and 84 days (12-week [12W] group). Digital models were measured before the treatment (T0) and at the end of the evaluation period (T1) by a blinded operator with OrthoAnalyzer® software (3-Shape, Copenhagen, Denmark) and compared using MANOVA. A multiple linear regression was also used to evaluate the influences of age, initial dental crowding, incisor inclination, and facial pattern on the amount of expansion. Results Mean expansion was 2.77 ± 0.84 mm (upper arch) and 3.12 ± 0.88 mm (lower arch) in the 12W group; 1.96 ± 0.82 mm and 2.27 ± 0.96 mm in the 8W group, and 1.11 ± 0.93 mm and 1.32 ± 0.91 mm in the 4W group, respectively for the upper and lower arches. The amount of expansion varied significantly between the groups in the area of the canines, first premolars, and second premolars for both arches. Expansion was less in older patients. Initial dental crowding, incisor inclination and facial pattern had no influence on dental expansion. Conclusion Longer time spans between archwire changes provided greater amounts of expansion, while age is inversely related, with younger patients expressing greater amounts of expansion. The results also suggest that the expansion provided by the fixed appliances is expressed mainly in the canine and premolar areas.
- 5 August 2024
- Published by Springer Nature in Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie
- Vol. 87 (1) , 43-54
Periodontal evaluation after maxillary expansion with a tooth–bone-borne expander in growing patients
Purpose This two-arm parallel randomized controlled trial aimed to evaluate and compare periodontal changes due to rapid maxillary expansion (RME) using tooth–bone-borne and tooth-borne devices in growing patients via clinical examinations and cone-beam computed tomography (CBCT). Materials and methods Forty-two eligible patients (aged 11–14 years; transverse maxillary deficiency, posterior crossbite) were screened and divided into two groups based on the treatment received (randomization was performed using computer-generated numeric sequences): hybrid hyrax tooth–bone-borne group (TBB) and hyrax tooth-borne group (TB). The primary outcome was the change in cortical bone thickness (by CBCT). In addition, the clinical attachment level (CAL), gingival recession, and bleeding were assessed. Both examinations were performed before and 3 months after the activation phase. Intergroup comparisons were performed using analysis of covariance (ANCOVA; P < 0.05). Results Twenty-one patients (12 girls and 9 boys; mean initial age, 13.3 years) were included in the TBB group and 21 (5 girls and 16 boys; mean initial age, 13.2 years) were included in the TB group. The TB group exhibited a decrease in buccal bone thickness in the first premolars and first molars at all three evaluated levels. Specifically, tooth 14 at 3 mm from the enamel–cement junction showed a significant width reduction (0.7 mm; p < 0.001), accompanied by a notable increase in palatal cortical thickness at 6 mm of enamel–cement junction (1.13 mm; p < 0.001). Conclusions RME resulted in buccal bone thickness reduction at the first premolar with hyrax treatment. In the molar region, both devices resulted in cortical bone alterations that were less pronounced in the TBB group.
- 5 August 2024
- Published by Springer Nature in Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie
- Vol. 87 (1) , 43-54
Periodontal evaluation after maxillary expansion with a tooth–bone-borne expander in growing patients
Purpose This two-arm parallel randomized controlled trial aimed to evaluate and compare periodontal changes due to rapid maxillary expansion (RME) using tooth–bone-borne and tooth-borne devices in growing patients via clinical examinations and cone-beam computed tomography (CBCT). Materials and methods Forty-two eligible patients (aged 11–14 years; transverse maxillary deficiency, posterior crossbite) were screened and divided into two groups based on the treatment received (randomization was performed using computer-generated numeric sequences): hybrid hyrax tooth–bone-borne group (TBB) and hyrax tooth-borne group (TB). The primary outcome was the change in cortical bone thickness (by CBCT). In addition, the clinical attachment level (CAL), gingival recession, and bleeding were assessed. Both examinations were performed before and 3 months after the activation phase. Intergroup comparisons were performed using analysis of covariance (ANCOVA; P < 0.05). Results Twenty-one patients (12 girls and 9 boys; mean initial age, 13.3 years) were included in the TBB group and 21 (5 girls and 16 boys; mean initial age, 13.2 years) were included in the TB group. The TB group exhibited a decrease in buccal bone thickness in the first premolars and first molars at all three evaluated levels. Specifically, tooth 14 at 3 mm from the enamel–cement junction showed a significant width reduction (0.7 mm; p < 0.001), accompanied by a notable increase in palatal cortical thickness at 6 mm of enamel–cement junction (1.13 mm; p < 0.001). Conclusions RME resulted in buccal bone thickness reduction at the first premolar with hyrax treatment. In the molar region, both devices resulted in cortical bone alterations that were less pronounced in the TBB group.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 29 (4) , e2424102
Orthodontic finishing errors detected in board-approved cases: common types and prediction
Objective: To report and rank orthodontic finishing errors recorded in the clinical phase of the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) examination and correlate pretreatment case complexity with orthodontic treatment outcomes. Materials and Methods: This single-center cross-sectional survey collected retrospective data from the clinical phase of BBO examinations between 2016 and 2023. The quality of orthodontic clinical outcomes of each case was assessed by means of the Cast-Radiograph Evaluation (CRE), while case complexity was evaluated using the Discrepancy Index (DI), both tools provided by the American Board of Orthodontics. Survey items were analyzed using descriptive statistics, and a correlation analysis between total CRE and DI scores (p<0.05) was also performed. Results: A total of 447 orthodontic records was included. Orthodontic finishing errors were often observed, and no case was completely perfect. In the total CRE score, an average of 15 points was discounted for each case. Most frequently found issues involved problems with alignment, buccolingual inclination, marginal ridge, and occlusal relationship. The median DI score for initial case complexity was 22.0 (range 10.0 - 67.0). There was no significant correlation between the DI and CRE scores (p=0.106). Conclusion: Orthodontic finishing errors are inevitable, even in well-finished board-approved cases. Rotation, excessive buccolingual inclination, and discrepancies in marginal ridges are the most frequently observed areas of concern, in that order. Moreover, while case complexity, determined by DI, can impact orthodontic planning and pose challenges for clinicians, the study did not consider it a determining factor in predicting treatment outcomes.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 29 (4) , e2424102
Open AccessOrthodontic finishing errors detected in board-approved cases: common types and prediction
Objective: To report and rank orthodontic finishing errors recorded in the clinical phase of the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) examination and correlate pretreatment case complexity with orthodontic treatment outcomes. Materials and Methods: This single-center cross-sectional survey collected retrospective data from the clinical phase of BBO examinations between 2016 and 2023. The quality of orthodontic clinical outcomes of each case was assessed by means of the Cast-Radiograph Evaluation (CRE), while case complexity was evaluated using the Discrepancy Index (DI), both tools provided by the American Board of Orthodontics. Survey items were analyzed using descriptive statistics, and a correlation analysis between total CRE and DI scores (p<0.05) was also performed. Results: A total of 447 orthodontic records was included. Orthodontic finishing errors were often observed, and no case was completely perfect. In the total CRE score, an average of 15 points was discounted for each case. Most frequently found issues involved problems with alignment, buccolingual inclination, marginal ridge, and occlusal relationship. The median DI score for initial case complexity was 22.0 (range 10.0 - 67.0). There was no significant correlation between the DI and CRE scores (p=0.106). Conclusion: Orthodontic finishing errors are inevitable, even in well-finished board-approved cases. Rotation, excessive buccolingual inclination, and discrepancies in marginal ridges are the most frequently observed areas of concern, in that order. Moreover, while case complexity, determined by DI, can impact orthodontic planning and pose challenges for clinicians, the study did not consider it a determining factor in predicting treatment outcomes.
- 13 October 2023
- Published by SAGE Publications in Journal of Orthodontics
- Vol. 51 (3) , 314-322
Challenges of a two-phase orthodontic treatment of a mandibular lateral incisor-canine transposition and a maxillary palatally displaced canine: A case report
Introduction: The management of eruption disturbances in orthodontics may be challenging and requires a careful diagnosis and treatment planning. This case report discusses the challenges of a two-phase orthodontic treatment of a patient presenting with a dental eruption pattern anomaly. Patient concerns: A 10-year-old boy presented with no complaints for a routine orthodontic evaluation during the mixed dentition. Primary diagnoses: The patient was diagnosed with a skeletal Class I malocclusion with unilateral posterior crossbite, incomplete mandibular lateral incisor-canine transposition and a unilateral maxillary ectopic canine. Interventions: Phase 1 started with rapid maxillary expansion to correct the maxillary constriction and the ectopic eruption of the right maxillary canine. In the mandibular arch, phase 1 included the extraction of the left primary lateral incisor and canine, alignment of the left permanent lateral incisor and orthodontic traction of the left permanent canine. The duration of phase 1 was 14 months. Phase 2 involved a comprehensive course of orthodontic treatment and started when the patient was aged 13 years. This phase lasted 18 months. Results: An adequate dental occlusion was obtained, and the treatment results were stable after an 18-month follow-up. Conclusion: In this case, the early diagnosis of the dental anomalies was valuable as it allowed an early intervention to be undertaken, which resulted in overall treatment simplification and potentially minimised the adverse effects. This case report reinforces the importance of a careful follow-up during mixed dentition.
- 13 October 2023
- Published by SAGE Publications in Journal of Orthodontics
- Vol. 51 (3) , 314-322
Challenges of a two-phase orthodontic treatment of a mandibular lateral incisor-canine transposition and a maxillary palatally displaced canine: A case report
Introduction: The management of eruption disturbances in orthodontics may be challenging and requires a careful diagnosis and treatment planning. This case report discusses the challenges of a two-phase orthodontic treatment of a patient presenting with a dental eruption pattern anomaly. Patient concerns: A 10-year-old boy presented with no complaints for a routine orthodontic evaluation during the mixed dentition. Primary diagnoses: The patient was diagnosed with a skeletal Class I malocclusion with unilateral posterior crossbite, incomplete mandibular lateral incisor-canine transposition and a unilateral maxillary ectopic canine. Interventions: Phase 1 started with rapid maxillary expansion to correct the maxillary constriction and the ectopic eruption of the right maxillary canine. In the mandibular arch, phase 1 included the extraction of the left primary lateral incisor and canine, alignment of the left permanent lateral incisor and orthodontic traction of the left permanent canine. The duration of phase 1 was 14 months. Phase 2 involved a comprehensive course of orthodontic treatment and started when the patient was aged 13 years. This phase lasted 18 months. Results: An adequate dental occlusion was obtained, and the treatment results were stable after an 18-month follow-up. Conclusion: In this case, the early diagnosis of the dental anomalies was valuable as it allowed an early intervention to be undertaken, which resulted in overall treatment simplification and potentially minimised the adverse effects. This case report reinforces the importance of a careful follow-up during mixed dentition.
- Open Access
- 5 July 2023
- Published by Atena Editora Edição de Livros Ltda
Estudo cefalométrico radiográfico dos padrões de crescimento facial em pacientes com maloclusões de classe II, divisão 1ª de Angle, tratados ortodonticamente pela técnica do arco de canto
Publicado em 05 de julho de 2023. A proposta deste estudo foi descrever e comparar as alterações dentoesqueléticas produzidas pelo tratamento ortodôntico/ortopédico, em uma amostra de maloclusão de Classe II, divisão 1a de ANGLE, composta por indivíduos nos três tipos faciais: Mesofacial, Braquifacial e Dólicofacial. A amostra de 63 pessoas, leucodermas brasileiras, na fase de dentição permanente, com idade média de 12 anos e 8 meses, foi dividida em 22 indivíduos do tipo Mesofacial, 23 do tipo Braquifacial e 18 do tipo Dólicofacial. Todos os pacientes da amostra foram tratados pela Técnica do Arco de Canto, que seguiu uma mecânica apropriada para cada tipo facial, e submetidos à extração dos quatro primeiros pré-molares. Com base nos resultados obtidos e segundo a metodologia utilizada, parece-nos lícito concluir que: 1. Padrão dentoesquelético entre as fases Início e Término do tratamento. 1.1. Na dimensão vertical os três tipos faciais apresentaram aumentos dimensionais significativos nas variáveis esqueléticas e dentárias, com exceção da variável 1: ⊥ GoM que apresentou uma diminuição; 1.2. A posição vertical do incisivo superior, representado pela variável 1: ⊥ ENA ENP, manteve-se constante nos tipos Mesofacial e Dólicofacial; 1.3. As variáveis cefalométricas que medem os comprimentos mandibular e maxilar, apresentaram uma diferença estatisticamente significante entre as fases INÍCIO e TÉRMINO do tratamento, caracterizando um aumento dimensional destas estruturas; 1.4. Os primeiros molares superiores e inferiores sofreram uma mesialização estatisticamente significante nos três tipos faciais; 1.5. Considerando-se as medidas lineares e de uma certa forma acompanhada pelas variáveis angulares, observamos uma retração significativa nos incisivos superiores e inferiores nos três tipos faciais. Entretanto, as variáveis 1 / ENA ENP e 1 / GoM, que representam a inclinação dos incisivos, apresentaram significância estatística somente nos tipos Braquifacial e Mesofacial, respectivamente. 2. Comparação entre os tipos faciais. 2.1 Ao realizarmos a comparação entre os tipos faciais, concluímos que os ângulos que determinam o índice VERT de RICKETTS et al.68 (1982), ou seja, o ângulo do Eixo Facial, da Profundidade Facial, do Plano Mandibular, da Altura Facial Inferior e do Arco Mandibular, mantiveram a caracterização inicial dos tipos faciais; 2.2. As variáveis 1 / GoM, 1: ⊥ ENA ENP, 1: ⊥ GoM, 1: ⊥ ENA e 1: ⊥ Linha X Perp., relacionadas com o padrão dentário, e as variáveis Ar-Go’, ENA ENP ⊥ M e o Índice de Altura Facial, relacionadas com o padrão esquelético, caracterizaram diferentemente os tipos faciais entre o INÍCIO e o TÉRMINO do tratamento; 2.3. A medida angular 1 / GoM, não caracterizou diferentemente os tipos Mesofacial e Dólicofacial, porém esta variável apresentou uma diferença estatisticamente significante no tipo Braquifacial, demonstrando uma maior inclinação vestibular dos incisivos inferiores neste grupo; 2.4. As medidas lineares 1: ⊥ ENA ENP e 1: ⊥ GoM, não caracterizaram diferentemente os tipos Mesofacial e Braquifacial. Estas variáveis demonstraram diferenças estatisticamente significantes no tipo Dólicofacial, que apresentou o maior deslocamento vertical do incisivo superior e inferior; 2.5. A medida linear 1: ⊥ Linha X Perp., caracterizou diferentemente os tipos Braquifacial e Dólicofacial. Estes tipos faciais representam, respectivamente, o maior e o menor movimento de retração dos incisivos inferiores; 2.6. A medida linear Ar - Go’, não caracterizou diferentemente os tipos Mesofacial e Braquifacial, entretanto esta variável apresentou uma diferença estatisticamente significante no tipo Dólicofacial, o que evidencia uma redução da altura facial posterior; 2.7. A medida linear ENA ENP ⊥ M e o Índice de Altura Facial caracterizaram diferentemente os três tipos faciais. 3. Correlação entre o VERT e o Índice de Altura Facial 3.1 Há uma correlação positiva entre o VERT e o Índice de Altura Facial nos três grupos estudados, muito embora a correlação mais significante esteja no grupo Braquifacial. 4. Modificação dos tipos faciais 4.1. Os Tipos Faciais, nos três grupos estudados, não sofreram modificações estatisticamente significantes entre as fases INÍCIO e TÉRMINO do tratamento.
- 5 July 2023
- Published by Atena Editora Edição de Livros Ltda
Open AccessEstudo cefalométrico radiográfico dos padrões de crescimento facial em pacientes com maloclusões de classe II, divisão 1ª de Angle, tratados ortodonticamente pela técnica do arco de canto
Publicado em 05 de julho de 2023. A proposta deste estudo foi descrever e comparar as alterações dentoesqueléticas produzidas pelo tratamento ortodôntico/ortopédico, em uma amostra de maloclusão de Classe II, divisão 1a de ANGLE, composta por indivíduos nos três tipos faciais: Mesofacial, Braquifacial e Dólicofacial. A amostra de 63 pessoas, leucodermas brasileiras, na fase de dentição permanente, com idade média de 12 anos e 8 meses, foi dividida em 22 indivíduos do tipo Mesofacial, 23 do tipo Braquifacial e 18 do tipo Dólicofacial. Todos os pacientes da amostra foram tratados pela Técnica do Arco de Canto, que seguiu uma mecânica apropriada para cada tipo facial, e submetidos à extração dos quatro primeiros pré-molares. Com base nos resultados obtidos e segundo a metodologia utilizada, parece-nos lícito concluir que: 1. Padrão dentoesquelético entre as fases Início e Término do tratamento. 1.1. Na dimensão vertical os três tipos faciais apresentaram aumentos dimensionais significativos nas variáveis esqueléticas e dentárias, com exceção da variável 1: ⊥ GoM que apresentou uma diminuição; 1.2. A posição vertical do incisivo superior, representado pela variável 1: ⊥ ENA ENP, manteve-se constante nos tipos Mesofacial e Dólicofacial; 1.3. As variáveis cefalométricas que medem os comprimentos mandibular e maxilar, apresentaram uma diferença estatisticamente significante entre as fases INÍCIO e TÉRMINO do tratamento, caracterizando um aumento dimensional destas estruturas; 1.4. Os primeiros molares superiores e inferiores sofreram uma mesialização estatisticamente significante nos três tipos faciais; 1.5. Considerando-se as medidas lineares e de uma certa forma acompanhada pelas variáveis angulares, observamos uma retração significativa nos incisivos superiores e inferiores nos três tipos faciais. Entretanto, as variáveis 1 / ENA ENP e 1 / GoM, que representam a inclinação dos incisivos, apresentaram significância estatística somente nos tipos Braquifacial e Mesofacial, respectivamente. 2. Comparação entre os tipos faciais. 2.1 Ao realizarmos a comparação entre os tipos faciais, concluímos que os ângulos que determinam o índice VERT de RICKETTS et al.68 (1982), ou seja, o ângulo do Eixo Facial, da Profundidade Facial, do Plano Mandibular, da Altura Facial Inferior e do Arco Mandibular, mantiveram a caracterização inicial dos tipos faciais; 2.2. As variáveis 1 / GoM, 1: ⊥ ENA ENP, 1: ⊥ GoM, 1: ⊥ ENA e 1: ⊥ Linha X Perp., relacionadas com o padrão dentário, e as variáveis Ar-Go’, ENA ENP ⊥ M e o Índice de Altura Facial, relacionadas com o padrão esquelético, caracterizaram diferentemente os tipos faciais entre o INÍCIO e o TÉRMINO do tratamento; 2.3. A medida angular 1 / GoM, não caracterizou diferentemente os tipos Mesofacial e Dólicofacial, porém esta variável apresentou uma diferença estatisticamente significante no tipo Braquifacial, demonstrando uma maior inclinação vestibular dos incisivos inferiores neste grupo; 2.4. As medidas lineares 1: ⊥ ENA ENP e 1: ⊥ GoM, não caracterizaram diferentemente os tipos Mesofacial e Braquifacial. Estas variáveis demonstraram diferenças estatisticamente significantes no tipo Dólicofacial, que apresentou o maior deslocamento vertical do incisivo superior e inferior; 2.5. A medida linear 1: ⊥ Linha X Perp., caracterizou diferentemente os tipos Braquifacial e Dólicofacial. Estes tipos faciais representam, respectivamente, o maior e o menor movimento de retração dos incisivos inferiores; 2.6. A medida linear Ar - Go’, não caracterizou diferentemente os tipos Mesofacial e Braquifacial, entretanto esta variável apresentou uma diferença estatisticamente significante no tipo Dólicofacial, o que evidencia uma redução da altura facial posterior; 2.7. A medida linear ENA ENP ⊥ M e o Índice de Altura Facial caracterizaram diferentemente os três tipos faciais. 3. Correlação entre o VERT e o Índice de Altura Facial 3.1 Há uma correlação positiva entre o VERT e o Índice de Altura Facial nos três grupos estudados, muito embora a correlação mais significante esteja no grupo Braquifacial. 4. Modificação dos tipos faciais 4.1. Os Tipos Faciais, nos três grupos estudados, não sofreram modificações estatisticamente significantes entre as fases INÍCIO e TÉRMINO do tratamento.