JPJoão Batista de Paiva

João Batista de Paiva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


João Batista de Paiva has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of time between archwire changes on intended dentoalveolar expansion in orthodontic patients treated with fixed appliances

    by Murilo Henrique Cruz, David Normando, Marcos Rogério de Mendonça, Eloísa Peixoto Soares Ueno, José Rino Neto, João Batista de Paiva

    Objective To analyze the effects of the time span between archwire changes on the amount of transverse dental arch expansion. The design was a prospective, controlled clinical trial. Randomization was performed by computer-generated allocation tables. Methods In all, 35 patients were evaluated in three groups treated with fixed appliances and the same four sequential leveling archwires, however, with different replacement periods: 28 days (4-week [4W] group), 56 days (8-week [8W] group), and 84 days (12-week [12W] group). Digital models were measured before the treatment (T0) and at the end of the evaluation period (T1) by a blinded operator with OrthoAnalyzer® software (3-Shape, Copenhagen, Denmark) and compared using MANOVA. A multiple linear regression was also used to evaluate the influences of age, initial dental crowding, incisor inclination, and facial pattern on the amount of expansion. Results Mean expansion was 2.77 ± 0.84 mm (upper arch) and 3.12 ± 0.88 mm (lower arch) in the 12W group; 1.96 ± 0.82 mm and 2.27 ± 0.96 mm in the 8W group, and 1.11 ± 0.93 mm and 1.32 ± 0.91 mm in the 4W group, respectively for the upper and lower arches. The amount of expansion varied significantly between the groups in the area of the canines, first premolars, and second premolars for both arches. Expansion was less in older patients. Initial dental crowding, incisor inclination and facial pattern had no influence on dental expansion. Conclusion Longer time spans between archwire changes provided greater amounts of expansion, while age is inversely related, with younger patients expressing greater amounts of expansion. The results also suggest that the expansion provided by the fixed appliances is expressed mainly in the canine and premolar areas.

  • Periodontal evaluation after maxillary expansion with a tooth–bone-borne expander in growing patients

    by Bruno de Paula Machado Pasqua, Michelle Sendyk, Cristiane Barros André, João Batista de Paiva, Benedict Wilmes, José Rino Neto

    Purpose This two-arm parallel randomized controlled trial aimed to evaluate and compare periodontal changes due to rapid maxillary expansion (RME) using tooth–bone-borne and tooth-borne devices in growing patients via clinical examinations and cone-beam computed tomography (CBCT). Materials and methods Forty-two eligible patients (aged 11–14 years; transverse maxillary deficiency, posterior crossbite) were screened and divided into two groups based on the treatment received (randomization was performed using computer-generated numeric sequences): hybrid hyrax tooth–bone-borne group (TBB) and hyrax tooth-borne group (TB). The primary outcome was the change in cortical bone thickness (by CBCT). In addition, the clinical attachment level (CAL), gingival recession, and bleeding were assessed. Both examinations were performed before and 3 months after the activation phase. Intergroup comparisons were performed using analysis of covariance (ANCOVA; P < 0.05). Results Twenty-one patients (12 girls and 9 boys; mean initial age, 13.3 years) were included in the TBB group and 21 (5 girls and 16 boys; mean initial age, 13.2 years) were included in the TB group. The TB group exhibited a decrease in buccal bone thickness in the first premolars and first molars at all three evaluated levels. Specifically, tooth 14 at 3 mm from the enamel–cement junction showed a significant width reduction (0.7 mm; p < 0.001), accompanied by a notable increase in palatal cortical thickness at 6 mm of enamel–cement junction (1.13 mm; p < 0.001). Conclusions RME resulted in buccal bone thickness reduction at the first premolar with hyrax treatment. In the molar region, both devices resulted in cortical bone alterations that were less pronounced in the TBB group.


  • Open Access

    EFFECTS OF 2x4 APPLIANCE AND NiTi OPEN SPRING ON MIXED DENTITION

    by Juliana Daia Cruz, Gilberto Vila Nova, Michel Crosato, João Batista Paiva, José Rino Neto

    Background/Objectives: The mixed dentition period is the best time to guide the occlusion and intercept a malocclusion. Among the preventive orthodontic procedures, space recovery is considered extremely important for the biogenesis of the occlusion to follow its normal course. Several orthodontic appliances indicated for space recovery in mixed dentition are mentioned in the literature and among them, mechanics with a fixed 2x4 partial appliance.This study aimed to evaluate changes in the dimensions of the upper arch after using a 2x4 fixed partial appliance with expanded CuNiTi wires and open NiTi springs. Material and Methods: Twenty-four children (±9 years) were assessed who had no space for the eruption of permanent teeth in the upper arch, treated with a 2x4 fixed partial appliance. Lateral teleradiography imaging, panoramic radiography and cast models were used before and after the treatment. The results were compared to a control group of 24 children who did not receive treatment and had their documents assessed for growth-related changes. The following changes were evaluated: dimension of arch perimeter, arch depth, intermolar distance, and inclination and displacement of permanent upper molars and incisors. Student’s t-test was used to assess the differences between pre- and post-treatment times, with significance level of 5%. Results: Increases were observed in arch perimeter (p=0) and arch depth (p=0) due to a distal movement of the crown (p=0) and the root of molars (p=0.004), and maintenance of the spatial position of the incisors, without protrusion (p=0.37) or vestibular movement (p=0.13). Limitations: the limitation of the present study was not to randomize the sample and not to use a control group identical to the group that received treatment. Conclusion: 2x4 fixed partial appliance was effective for the recovery of mixed dentition space, increasing the arch perimeter and depth through a distal movement of the upper molar and maintenance of incisor position.


  • Open Access

    Does endodontics influence radiological detection of external root resorption? an in vitro study

    by C. Parrales-Bravo, S. P. Friedrichsdorf, C. Costa, J. B. Paiva, A. Iglesias-Linares

    External root resorption (ERR) has a multifactorial etiology and is difficult to diagnose, which means that is continues to be of research interest. This work mainly aims to determine whether external root resorption can be differentially detected in root-filled versus non-endodontically treated teeth using digital periapical radiography (DPR) and cone-beam computed tomography (CBCT). The Checklist for Reporting In-vitro Studies (CRIS) guidelines were followed throughout this study. This experiment highlights the preparation and generation of standardized synthetic teeth measured on three-dimensional records converted into Digital Imaging and Communication on Medicine (DICOM) file format. Twelve replicate maxillary incisors were randomized into two groups: (G1) six non-endodontically treated, and (G2) six endodontically treated teeth. In both groups, actual tooth lengths of all specimens were measured and compared with measurements obtained using DPR and CBCT. Simulated ERR lesions [0.12, 0.18, 0.20 mm × 0.5 mm depth in the mesial, distal and palatal apical regions] were created progressively, radiographic images were recorded, and 24 DPRs and 96 CBCTs were obtained in total. Eight blinded, previously calibrated researchers made a total of 1920 measurements (using Horos Software). Data were analyzed using the Shapiro–Wilk, ANOVA, Kruskal–Wallis and Wilcoxon rank post-hoc tests [Bonferroni correction in multiple comparison tests (p < 0.05)]. ICC values for intra- and inter-examiner agreement were appropriate. DPR overestimated ERR detection compared to the actual and CBCT measurements [Mean diff = 0.765 and 0.768, respectively]. CBCT diagnosis of ERR lesions in specimens without root canal treatment was significantly more accurate than DPR diagnoses on both non-endodontically and endodontically-treated specimens [p = 0.044; p = 0.037, respectively]. There was an 18.5% reduction in sensitivity in all DPR diagnoses made on endodontic teeth versus those made on non-endodontically treated teeth. For the smallest ERR lesions, this sensitivity was even more marked, with 27.8 and 25% less sensitivity, respectively. The results of this study highlight that both CBCT and DPR are good diagnostic methods for ERR. Nevertheless, root canal filling material influences diagnostic capability in ERR. The clinical significance was that the presence of intracanal material reduces the detection and diagnosis of ERR by DPR in teeth with root canal treatment.


  • Open Access

    Short-term assessment of pain and discomfort during rapid maxillary expansion with tooth-bone-borne and tooth-borne appliances: randomized clinical trial

    by Bruno de Paula Machado Pasqua, Cristiane Barros André, João Batista de Paiva, José Rino Neto

    Objective: The aim of this randomized clinical trial was to evaluate and compare, during the first week of rapid maxillary expansion (RME), the impact caused by two types of appliances: Hyrax and Hybrid Hyrax. Methods: Forty-two patients who met the eligibility criteria (aged 11-14 years, with transverse maxillary deficiency, posterior crossbite, and presence of maxillary first premolars and first permanent molars) were selected and randomly divided into two groups: TBB GROUP (tooth-bone-borne expander), treated with Hybrid Hyrax (12 females and 9 males, mean age 13.3 ± 1.3 years), and TB GROUP (tooth-borne expander), treated with Hyrax (5 females and 16 males, mean age 13.3 ± 1.4 years). Pain and discomfort were assessed in two times: after the first day of activation (T1) and four days after, by means of the numerical rate scale and the instrument MFIQ (Mandibular Functional Impairment Questionnaire). Descriptive statistics and the Mann-Whitney test were used for comparison between groups and between sexes. A 5% significance level was adopted. Results: Both appliances had a negative impact, generating pain and discomfort, and reducing functional capacity. However, the scores obtained were of low intensity and no significant differences were observed between the groups. Considering sexes, there were statistically significant differences, with the female sex presenting higher scores for pain and functional limitation. Conclusions: Despite causing impact in pain and increase in the functional limitation, these changes were of low intensity, with no statistical difference between the groups. Females were more sensitive to the impact caused by the RME.


  • Open Access

    Tomographic analysis of the anatomical proportion between buccal cusps heights and marginal ridges depths of maxillary premolars for vertical bracket positioning

    by João Batista de Paiva, Murilo Henrique Cruz, Michelle Sendyk, Fausto Medeiros Mendes, Israel Chilvarquer, José Rino Neto

    There are several protocols for vertical positioning of brackets during bonding suggested in the literature; however, it is observed that even with a strict bonding protocol, the marginal ridges of...

  • Open Access

    Protração maxilar usando mini-implantes em paciente Classe III: relato de caso

    by Ricardo Alves de Souza, Gregório Bonfim Dourado, Ivanderson Santana de Almeida, João Batista de Paiva

    Uma alternativa já consolidada ao tratamento ortopédico convencional com disjunção palatina e máscara facial para pacientes em crescimento com Classe III esquelética por deficiência maxilar é a utilização de ancoragem esquelética para protração da maxila. Seu uso elimina os efeitos dentários adversos da terapia convencional, como extrusão e mesialização de molares superiores, projeção de incisivos superiores e retroinclinação de incisivos inferiores. Além disso elimina a necessidade de uso de um dispositivo extra-oral, o que contribui para a motivação dos pacientes. As miniplacas são a forma de ancoragem esquelética mais usada para esse tipo de terapia, entretanto a necessidade de um passo cirúrgico para instalação e outro para remoção das placas representa um ponto desvantajoso para essa técnica, e dessa forma o uso de mini implantes foi proposto com a finalidade de promover protração maxilar eliminando o passo cirúrgico. Este trabalho se propõe a descrever a técnica de prostração maxilar apoiada em mini implantes ortodônticos, ilustrada através de um caso clínico de um paciente tratado com esta terapia, mostrando os resultados faciais e oclusais positivos alcançados.

  • Open Access

    Stress distribution analysis in anterior teeth caused by several retraction mechanics

    by Rafael Golghetto Domingos, Almir Lima Júnior, Dalva Cruz Laganá, José Rino Neto, Jorge Abrão, João Batista de Paiva

    Introduction: Orthodontic retraction of the anterior teeth is indicated when the patient has a malocclusion with protrusion of the incisors. Several mechanics are indicated to perform this retraction. Objective: The objective of this study was to compare the strains generated by four different types of retraction mechanics along the roots of the anterior teeth. Methods: A photoelastic model simulating an arch with first premolars extraction was made. Sixty retraction archwires were prepared, including fifteen for each type of mechanics evaluated: sliding, teardrop loop spring, T-loop spring and double key loop archwire. The strains were observed in two perspectives: occlusal and oblique. In the occlusal perspective, strains were compared among the six anterior teeth. From the oblique perspective, strains were compared among the thirds of the left canine root. Results: In the occlusal perspective, the teardrop loop spring mechanics presented greater strains, followed by T-loop spring, double key loop archwire and sliding mechanics. In all mechanics, strains were more concentrated in the canines than in the incisors. From the oblique perspective, the teardrop loop mechanics generated greater strains in the cervical regions of the canine, and in the apical regions, no differences were found in strains among the four types of mechanics. In the same mechanics, greater strains were present in the cervical zones. Conclusion: The teardrop loop spring retraction mechanic presented the greatest mean strain, and the sliding retraction mechanic presented the lowest mean strain on the root of anteroinferior teeth in the occlusal and oblique perspectives.


  • Open Access

    Maxillary protraction with rapid maxillary expansion and facemask versus skeletal anchorage with mini-implants in class III patients: a non-randomized clinical trial

    by Ricardo Alves de Souza, José Rino Neto, João Batista de Paiva

    The use of skeletal anchorage devices for maxillary protraction in patients with class III malocclusion due to deficiency in the middle third of the face has been shown to be a promising approach to treatment of these patients. The aim of this study was to evaluate the treatment of class III patients with maxillary retrusion, using orthodontic mini-implants (MI) associated with intermaxillary elastics in comparison with the rapid maxillary expansion and facemask protocol (RME/FM). In this prospective non-randomized clinical trial, the sample of 24 participants between 7 and 12 years of age (median age of 10.0 years and interquartile range = 3.0 years), at the stage prior to the pre-pubertal growth spurt, was divided in two groups. In group facemask (FM) (n = 12), the individuals received orthopedic treatment with RME/FM. In group MI (n = 12), two mini-implants were inserted in the region close to the maxillary first molar roots, and the other two in the region of the mandibular canines. Initial and final lateral teleradiographs were taken for cephalometric evaluation of all the cases. Statistical analysis included the Mann-Whitney, Wilcoxon, and Fisher’s exact tests. The level of significance was 5% (α = 0.05). Improvement was verified in the facial profile and occlusion of the participants, showing advancement of the maxilla in the two groups, with significant differences (P ≤ 0.05) between T0 and T1 in the following measurements: SNA, ANB, Wits, Co-A, Co-Gn, NAP, A-Npog, overjet, and molar relationship. There was no statistically significant intergroup difference (P > 0.05) in the cephalometric measurements evaluated, but the time of treatment was significant, and was faster for group MI. The protocol with mini-implants may be an option for the correction of Class III due to maxillary deficiency.


  • Open Access

    Effect of orthodontic treatment on alveolar bone thickness in adults: a systematic review

    by Michelle Sendyk, Daniele Sigal Linhares, Claudio Mendes Pannuti, João Batista de Paiva, José Rino Neto

    Objectives: This review aimed at evaluating changes in alveolar bone thickness after completion of orthodontic treatment. Methods: Only prospective clinical studies that reported bone thickness in adult patients undergoing non-surgical orthodontic treatment were considered eligible. MEDLINE, EMBASE and LILACS databases were searched for articles published up to July 2018. Results: A total of 12 studies met the selected criteria. Most of the studies showed that orthodontic treatment produces a reduction in bone thickness of incisors, mainly at the palatal side. Conclusion: On patients undergoing different orthodontic treatment techniques, there was a significant bone thickness reduction, mainly on the palatal side. Clinical relevance: These findings are relevant and have to be considered in diagnosis and planning of tooth movement, in order to prevent the occurrence of dehiscence and fenestration in alveolar bone.