RFRobert Farla

Robert Farla

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Robert Farla has a total of 144 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Topic classification of synchrotron experiment proposals using the OpenAlex model: enhancing metadata granularity and assessing live service feasibility

    by Terence Tan, Oliver J. Clark, Matthew J. Derry, Renaud Duyme, Guilherme Abreu Faria, Robert Farla, Ralf Flaig, Yogal Prasad Ghimirey, Anushka Ghosh, Miguel A. Gomez-Gonzalez, et al.

    Experiment proposals at synchrotron facilities serve as the primary gateway for instrument access. They currently lack the standardized and granular topic metadata necessary for tasks such as classification and review, and, broadly speaking, reuse. This paper defines and tests the feasibility of a real-time topic classification service for experiment proposals using an open-source machine-learning model and domain experts for the evaluation phase. We applied the OpenAlex topic classification model to 5384 experiment proposals and selected 209 of them to each be independently evaluated by three domain experts to assess the performance and utility of the model. Analysis of the evaluations reveals a general consensus among the reviewers regarding the model's predictions, with a Krippendorff's alpha of 0.572. We also find that 74.2% of the proposals had at least one topic that was unanimously deemed relevant, which suggests that the model performs well enough to be used in a live setting with real-time verification. However, we do not recommend using it in automated environments without human oversight, given the proposal-based precision score of 56.0%. By aligning the data infrastructure of photon and neutron facilities with the OpenAlex ecosystem, we also lay the groundwork for the eventual inclusion of proposals and experiment reports into OpenAlex, which is necessary for a complete record of a research activity.

  • Open Access

    Serpentine’s wet breakdown path and enhanced water flux in cold subduction zones

    by Heehyeon Sim, Yoonah Bang, Huijeong Hwang, Nico Giordano, Dongzhou Zhang, Hyun Hwi Lee, Taeyeol Jeon, Robert Farla, Hanns-Peter Liermann, Yongjae Lee


  • High-pressure generation above 45 GPa over a 10 mm3 volume with a multi-anvil press

    by Guoliang Niu, Lianjie Man, Peiyang Mu, Junkai Li, Rémy Pierru, Amrita Chakraborti, Shuai Tang, Cheng Qian, Shengbo Cao, Shijing Zhao, et al.

    High-pressure generation in multi-anvil presses has long been limited to pressures below ∼25 GPa when millimeter-scale samples are required. In this study, we systematically optimized the experimental setup for a Kawai-cell assembly using tungsten carbide anvils with a truncation edge length (TEL) of 3 mm to extend the achievable pressure range. Our results show that, in contrast to previous studies using smaller assemblies (TEL = 1.5 and 1.0 mm), tapering the anvils solely has a negligible effect on pressure-generation capability for the large sample volumes investigated here, despite a substantial increase in anvil gap under the same load. In contrast, reducing the gasket volume significantly improves the efficiency of press-load transmission to the sample, enabling an ∼33% increase in pressure compared with conventional designs using the same type of anvil. Using the optimized gasket design together with ultrahard tungsten carbide anvils with a 1° taper (TJS01, Fujilloy; TEL = 3 mm), pressures of up to 45.8 GPa were achieved at room temperature while maintaining a truncation-confined volume >10 mm3 and an anvil gap >0.3 mm. This technical breakthrough not only enables the synthesis of functional materials with large sample volumes at pressures above 45 GPa but also opens doors to unprecedentedly high pressures for precise physical property measurements that require large sample volumes and large anvil gaps, including ultrasonic interferometry, electrical impedance, and thermal conductivity measurements in a multi-anvil press.

  • Open Access

    Bottom-up Synthesis of Molecular and Fluorescent Nanodiamonds from Nanographene

    by Jiaxu Liang, Christopher P. Ender, Nancy C. Forero-Martinez, Jingyi Liu, Xin Yang, Raul Gonzalez Brouwer, Lev Kazak, Yizhi Liu, Tobias Eklund, Mangalika Sinha, et al.

    Nanodiamonds with colour centres have the potential to transform a wide range of disciplines, including quantum computation1,2, surface NMR spectroscopy3–6, single-spin magnetometry7,8, widefield quantum microscopy9, and single photon sources10,11. However, the controlled synthesis of ultra-small and uniform molecular ND (m-NDs) still represents a great challenge. The synthesis techniques currently available only allow for the production of NDs that vary in terms of their particle size distribution, morphology, the presence of undesired contaminants and lattice defects leading to inconsistent fluorescence properties. This greatly limits the performance and applications of NDs. Herein, molecularly defined nanographenes have been used for the first time as precursors for the high-pressure, high-temperature synthesis of nanodiamonds. Superphenalene has been discovered for the bottom-up synthesis of ultra-small, monodisperse nanodiamonds without impurities and on a milligram scale. It also provides a simple and efficient platform for introducing atomic colour centres into the nanodiamond lattice based on a two-component mixture. Fluorescent nanodiamonds with silicon or germanium related color centres are obtained without impurities and without the need for post-synthesis activation of colour centres. Nanographenes thus establish a new paradigm for the large-scale production of high quality molecular nanodiamonds and the introduction of colour centres, which will offer great prospects for future applications of nanodiamonds.

  • Open Access

    Thermal equations of state of B2-structured rubidium halides RbCl, RbBr, and RbI

    by R. Farla, A. Néri, M. Pöppelbaum, K. Glazyrin

    In this study, we determined the thermal equations of state (EoS) for rubidium chloride (RbCl), rubidium bromide (RbBr), and rubidium iodide (RbI) in the B2 (CsCl-type) structure. We conducted in situ energy-dispersive x-ray diffraction measurements at high pressures (up to 26 GPa) and temperatures (up to 1800 K) using a large volume press. Pressures were calibrated using CsCl, Mo, and Pt in the same cell assemblies. For each B2-structured Rb halide, the parameter V0 (unit cell volume at room pressure) was estimated from additional diamond anvil cell experiments at 300 K. Using the third-order Birch–Murnaghan equation and the Mie–Grüneisen–Debye thermal model, we derived the thermoelastic parameters for each phase: RbCl: K0 = 19.89(8) GPa, K0′ = 5.00(2), γ0 = 1.96(4), q = 1.05(9), RbBr: K0 = 16.28(4) GPa, K0′ = 5.28(2), γ0 = 2.18(14), q = 1.52(24), RbI: K0 = 13.69(4) GPa, K0′ = 4.95(1), γ0 = 2.21(7), q = 1.42(10). These parameters represent the isothermal bulk modulus (K0), its pressure derivative (K0′), the Grüneisen parameter (γ0), and the logarithmic volume dependence of the Grüneisen parameter (q). The newly derived EoS for rubidium halides provides effective pressure markers above 0.5 GPa, as they remain stable across wide pressure and temperature ranges. Additionally, RbCl and RbBr offer improved x-ray transmission compared to CsCl. These EoS can be combined with a secondary metallic phase to estimate pressure and temperature in the absence of a thermocouple, taking advantage of the large differences in thermal expansion between halides and metals.

  • Open Access

    Synthesis and in-depth structure determination of a novel metastable high-pressure CrTe3 phase

    by Lennart Voss, Nico Alexander Gaida, Anna-Lena Hansen, Martin Etter, Niklas Wolff, Viola Duppel, Andriy Lotnyk, Wolfgang Bensch, Hubert Ebert, Sergey Mankovsky, et al.

    This study reports the synthesis and crystal structure determination of a novel CrTe3 phase using various experimental and theoretical methods. The average stoichiometry and local phase separation of this quenched high-pressure phase were characterized by ex situ synchrotron powder X-ray diffraction and total scattering. Several structural models were obtained using simulated annealing, but all suffered from an imperfect Rietveld refinement, especially at higher diffraction angles. Finally, a novel stoichiometrically correct crystal structure model was proposed on the basis of electron diffraction data and refined against powder diffraction data using the Rietveld method. Scanning electron microscopy–energy-dispersive X-ray spectrometry (EDX) measurements verified the targeted 1:3 (Cr:Te) average stoichiometry for the starting compound and for the quenched high-pressure phase within experimental errors. Scanning transmission electron microscopy (STEM)–EDX was used to examine minute variations of the Cr-to-Te ratio at the nanoscale. Precession electron diffraction (PED) experiments were applied for the nanoscale structure analysis of the quenched high-pressure phase. The proposed monoclinic model from PED experiments provided an improved fit to the X-ray patterns, especially after introducing atomic anisotropic displacement parameters and partial occupancy of Cr atoms. Atomic resolution STEM and simulations were conducted to identify variations in the Cr-atom site-occupancy factor. No significant variations were observed experimentally for several zone axes. The magnetic properties of the novel CrTe3 phase were investigated through temperature- and field-dependent magnetization measurements. In order to understand these properties, auxiliary theoretical investigations have been performed by first-principles electronic structure calculations and Monte Carlo simulations. The obtained results allow the observed magnetization behavior to be interpreted as the consequence of competition between the applied magnetic field and the Cr–Cr exchange interactions, leading to a decrease of the magnetization towards T = 0 K typical for antiferromagnetic systems, as well as a field-induced enhanced magnetization around the critical temperature due to the high magnetic susceptibility in this region.

  • Open Access

    Crystal structures of two new high-pressure oxynitrides with composition SnGe4N4O4, from single-crystal electron diffraction

    by Philipp Gollé-Leidreiter, Shrikant Bhat, Leonore Wiehl, Qingbo Wen, Peter Kroll, Ryo Ishikawa, Martin Etter, Robert Farla, Yuichi Ikuhara, Ralf Riedel, et al.

    SnGe4N4O4 was synthesized at high pressure (16 and 20 GPa) and high temperature (1200 and 1500°C) in a large-volume press. Powder X-ray diffraction experiments using synchrotron radiation indicate that the derived samples are mixtures of known and unknown phases. However, the powder X-ray diffraction patterns are not sufficient for structural characterization. Transmission electron microscopy studies reveal crystals of several hundreds of nanometres in size with different chemical composition. Among them, crystals of a previously unknown phase with stoichiometry SnGe4N4O4 were detected and investigated using automated diffraction tomography (ADT), a three-dimensional electron diffraction method. Via ADT, the crystal structure could be determined from single nanocrystals in space group P63 mc, exhibiting a nolanite-type structure. This was confirmed by density functional theory calculations and atomic resolution scanning transmission electron microscopy images. In one of the syntheses runs a rhombohedral 6R polytype of SnGe4N4O4 could be found together with the nolanite-type SnGe4N4O4. The structure of this polymorph was solved as well using ADT.


  • Open Access

    The development of internal pressure standards for in-house elastic wave velocity measurements in multi-anvil presses

    by A. Néri, L. Man, J. Chantel, R. Farla, G. Bauer, S. Linhardt, T. Boffa Ballaran, D. J. Frost

    Ultrasonic systems are powerful tools to determine elastic wave velocities of minerals and materials at high pressure and temperature and have been extensively developed in recent decades. However, accurate measurement of sample length is required to convert travel times into wave velocities, limiting their use to synchrotron facilities or room temperature experiments in laboratories. We have made use of a close collaboration between the Bayerisches Geoinstiut and the P61B end-station beamline (PETRA III - DESY) to install ultrasonic systems and develop a novel dual travel time method for in situ pressure determination without the need for synchrotron radiation. Our method relies on the travel times of elastic waves through a reference material; it requires a thermocouple and is non-intrusive, with the reference material replacing the backing plate of the high-pressure assembly. Pressures obtained from this dual travel time method show excellent agreement with those obtained from x-ray diffraction using synchrotron radiation on standard materials. Our novel method enables in situ pressure determination at varying temperatures during in-house ultrasonic interferometry experiments. This allows us not only to determine the elastic behavior of minerals and materials but also to investigate phase diagrams, solidus, or liquidus conditions at varying pressures and temperatures during in-house experiments. During the installation of the pulse-echo ultrasonic system, we identified critical parameters for obtaining reliable data. While these requirements are well-known to experts, this study presents a comprehensive review of the different characteristics of ultrasonic systems, providing user-friendly guidelines for new users installing and operating such systems in high-pressure and high-temperature conditions.


  • Open Access

    Towards jointin situdetermination of pressure and temperature in the large volume press exclusively from X-ray diffraction

    by Robert Farla

    Since high-pressure devices have been used at synchrotron facilities, accurate determination of pressure and temperature in the sample has been a crucial objective, particularly for experiments that simulate the Earth's interior. However, in some cases using a thermocouple may have a high likelihood of failure or is incompatible with a high-pressure assembly. To address these challenges and similar issues, we aim to expand a previously proposed solution: to jointly estimate pressure and temperature (PT) throughin situX-ray diffraction, to cover a wider range of internalPTcalibrants tested over largerPTranges. A modifiable Python-based software is offered to quickly obtain results. To achieve these aims,in sitularge volume press experiments are performed on pellets of intimately mixed powders of a halide (NaCl, KCl, KBr, CsCl) or MgO and a metal (Pt, Re, Mo, W, Ni) in the pressure range 3–11 GPa and temperature range 300–1800 K. Although the pressure range was chosen for practical reasons, it also covers an equally important depth range in the Earth (down to 350 km) for geoscience studies. A thermocouple was used to validate thePTconditions in the cell assemblies. The key results show that choosing the appropriate calibrant materials and using a jointPTestimation can yield surprisingly small uncertainties (i.e.<±0.1 GPa and <±50 K). This development is expected to benefit current and future research at extreme conditions, as other materials with high compressibility or high thermal pressure, stable over largePTranges, may be discovered and used asPTcalibrants.


  • Open Access

    Acoustic emission detection of micro-cracks under high pressure and high temperature in a deformation large-volume apparatus at the endstation P61B, PETRA III

    by Shuailing Ma, Julien Gasc, Robert Farla

    We successfully developed an in situ acoustic emission (AE) detection setup that allows recording of AE waveforms (triggered and streaming) and simultaneous x-ray diffraction and imaging on samples deformed at high pressure and high temperature (HPHT) conditions in the Aster-15 Large Volume Press at the synchrotron beamline station P61B. This high pressure AE detection system is a powerful tool to investigate AE phenomena from the HPHT chamber. Six commercial acoustic sensors, protected by a tungsten carbide support ring on each anvil of the same material, have excellent survivability throughout each successive experiment. By pulsing each sensor in succession, the average wave velocity through the anvils and cell assembly can be determined at any press load. The distance between the sensors is obtained by x-ray radiography and by logging the positions of each hydraulic ram. This provides a basis for accurately locating AE events in the sample. The feasibility of this AE detection setup was confirmed by compression and deformation test runs using several different self-designed AE sources in specialized assemblies. The present setup proves to be extremely efficient and accurate in measuring brittle processes in samples under HPHT. It is now available for applications for beam time and experiments without x rays at P61B. Combined with synchrotron x rays, in situ pressure, temperature, strain rate and stress, and phase changes can be monitored while recording AE activity. We provide a powerful tool to investigate the origin of earthquakes, for example, causing AE emissions due to brittle dehydration reactions or phase transformations in the Earth.