Marwan Younis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Marwan Younis has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Gerhard Krieger
German Aerospace Center (DLR), Microwaves and Radar Institute, 82234 Wessling, Germany
18 shared publications - Alberto Moreira
German Aerospace Center (DLR), Microwaves and Radar Institute, Weling, Germany
12 shared publications - Felipe Queiroz de Almeida
Microwaves and Radar Institute, German Aerospace Center (DLR), Weling, Germany
7 shared publications - Michelangelo Villano
German Aerospace Center (DLR), Microwaves and Radar Institute, 82234 Wessling, Germany
5 shared publications - Sigurd Huber
Microwaves and Radar Institute German Aerospace Center (DLR) Oberpfaffenhofen Germany
5 shared publications - Federica Bordoni
German Aerospace Center, Microwaves and Radar Institute, Weling, Germany
3 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- p. 1
The Trade Space of Shared Azimuth Apertures in Digital Beamforming Synthetic Aperture Radar
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- p. 1
Open AccessThe Trade Space of Shared Azimuth Apertures in Digital Beamforming Synthetic Aperture Radar
- Open Access
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. PP (00189219) , 1-37
Spaceborne Synthetic Aperture Radar: Future Technologies and Mission Concepts
This article provides an overview of the state-of-the-art and future developments in spaceborne synthetic aperture radar (SAR). Today, we are experiencing a golden age of spaceborne SAR, with the number of satellites in orbit increasing rapidly. This article presents novel technologies and mission concepts associated with innovative imaging modes, which are required to meet the stringent user requirements for improved performance, global coverage, faster revisit times, enhanced spatial resolution, and increased information content in SAR imagery. It is shown that key technologies and mission concepts, based on digital beamforming (DBF), bistatic and multistatic SARs, distributed SAR, and multiple-input multiple-output SAR (MIMO-SAR), will boost the performance and capabilities of the future generation of spaceborne SAR systems. In addition, this article addresses dedicated mission designs, technologies, and orbit concepts that are required to fulfill the specific user requirements. Two main streams in the spaceborne SAR development are presented alongside a tradeoff analysis: 1) NewSpace SAR, consisting of small satellites in the 85-kg to 250-kg weight class with the highest-resolution imagery and very short revisit times and 2) full-fledged SAR satellites with global coverage, high performance, and enhanced capabilities. It is shown that NewSpace and full-fledged SAR satellites are complementary in terms of user requirements, and that combining both mission concepts enables novel mission concepts, such as multistatic SAR, opening the door to a wealth of new applications. This article concludes with an outlook on the future of spaceborne SAR.
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. PP (00189219) , 1-37
Open AccessSpaceborne Synthetic Aperture Radar: Future Technologies and Mission Concepts
This article provides an overview of the state-of-the-art and future developments in spaceborne synthetic aperture radar (SAR). Today, we are experiencing a golden age of spaceborne SAR, with the number of satellites in orbit increasing rapidly. This article presents novel technologies and mission concepts associated with innovative imaging modes, which are required to meet the stringent user requirements for improved performance, global coverage, faster revisit times, enhanced spatial resolution, and increased information content in SAR imagery. It is shown that key technologies and mission concepts, based on digital beamforming (DBF), bistatic and multistatic SARs, distributed SAR, and multiple-input multiple-output SAR (MIMO-SAR), will boost the performance and capabilities of the future generation of spaceborne SAR systems. In addition, this article addresses dedicated mission designs, technologies, and orbit concepts that are required to fulfill the specific user requirements. Two main streams in the spaceborne SAR development are presented alongside a tradeoff analysis: 1) NewSpace SAR, consisting of small satellites in the 85-kg to 250-kg weight class with the highest-resolution imagery and very short revisit times and 2) full-fledged SAR satellites with global coverage, high performance, and enhanced capabilities. It is shown that NewSpace and full-fledged SAR satellites are complementary in terms of user requirements, and that combining both mission concepts enables novel mission concepts, such as multistatic SAR, opening the door to a wealth of new applications. This article concludes with an outlook on the future of spaceborne SAR.
- 6 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Magazine
- Vol. 12 (1) , 186-189
International Coordination for Spaceborne Synthetic Aperture Radar: A Personal Impression [Technical Committees]
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.
- 6 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Magazine
- Vol. 12 (1) , 186-189
International Coordination for Spaceborne Synthetic Aperture Radar: A Personal Impression [Technical Committees]
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.
- Open Access
- 1 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 21 (1545598X) , 1-5
Mixing Matrix Calibration for BSS Range Ambiguity Suppression in Multichannel SAR Systems
A significant level of range ambiguity disturbance may affect high-resolution wide-swath spaceborne synthetic aperture radar (SAR) systems with multiple elevation receive beams. To overcome this limitation, a promising approach, based on the higher-order blind source separation (BSS), was recently proposed. This method, denoted as range ambiguity blind source separation (RABSS), demonstrates outstanding range ambiguity suppression performance when applied to heterogeneous scenes. Nevertheless, a degradation is expected for relatively homogeneous scenes. In this letter, the RABSS method is extended by introducing a novel mixing matrix calibration procedure. The robustness of the proposed approach towards different types of imaged surfaces is numerically analyzed by means of realistic simulations, which rely on the backscattering coefficients of TerraSAR-X images and the simulated antenna patterns of a large array-fed reflector antenna employing multiple elevation beams.
- 1 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 21 (1545598X) , 1-5
Open AccessMixing Matrix Calibration for BSS Range Ambiguity Suppression in Multichannel SAR Systems
A significant level of range ambiguity disturbance may affect high-resolution wide-swath spaceborne synthetic aperture radar (SAR) systems with multiple elevation receive beams. To overcome this limitation, a promising approach, based on the higher-order blind source separation (BSS), was recently proposed. This method, denoted as range ambiguity blind source separation (RABSS), demonstrates outstanding range ambiguity suppression performance when applied to heterogeneous scenes. Nevertheless, a degradation is expected for relatively homogeneous scenes. In this letter, the RABSS method is extended by introducing a novel mixing matrix calibration procedure. The robustness of the proposed approach towards different types of imaged surfaces is numerically analyzed by means of realistic simulations, which rely on the backscattering coefficients of TerraSAR-X images and the simulated antenna patterns of a large array-fed reflector antenna employing multiple elevation beams.
- Open Access
- 17 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-17
A 2-D Range Ambiguity Suppression Method Based on Blind Source Separation for Multichannel SAR Systems
Advanced multichannel spaceborne synthetic aperture radar (SAR) systems with multiple elevation beams allow for obtaining high-resolution and wide-swath SAR images. However, the degradation of the SAR image quality due to range ambiguities is still an issue. In this article, the range-ambiguity problem is analytically modeled and solved by employing a range-time and Doppler-frequency dependent mixing matrix, which describes the linear superposition of multiple mutually range-ambiguous radar echoes. The overall framework can be regarded as a generalization of the cocktail party problem where each listener has to separate one speech signal out of a linear superposition of multiple voices. For the first time, the 2-D dependence of the antenna radiation pattern in the elevation and azimuth directions is considered by accounting for both the real-time beamsteering in elevation and the systematic variations of the mixing coefficients with the Doppler frequency. A novel solution, based on higher order blind source separation, is presented. The performance of the proposed method is numerically analyzed, with reference to an array-fed reflector antenna SAR system, by simulating a realistic acquisition scenario. To this aim, real-SAR data and the actual antenna patterns of the Tandem-L mission proposal are considered.
- 17 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-17
Open AccessA 2-D Range Ambiguity Suppression Method Based on Blind Source Separation for Multichannel SAR Systems
Advanced multichannel spaceborne synthetic aperture radar (SAR) systems with multiple elevation beams allow for obtaining high-resolution and wide-swath SAR images. However, the degradation of the SAR image quality due to range ambiguities is still an issue. In this article, the range-ambiguity problem is analytically modeled and solved by employing a range-time and Doppler-frequency dependent mixing matrix, which describes the linear superposition of multiple mutually range-ambiguous radar echoes. The overall framework can be regarded as a generalization of the cocktail party problem where each listener has to separate one speech signal out of a linear superposition of multiple voices. For the first time, the 2-D dependence of the antenna radiation pattern in the elevation and azimuth directions is considered by accounting for both the real-time beamsteering in elevation and the systematic variations of the mixing coefficients with the Doppler frequency. A novel solution, based on higher order blind source separation, is presented. The performance of the proposed method is numerically analyzed, with reference to an array-fed reflector antenna SAR system, by simulating a realistic acquisition scenario. To this aim, real-SAR data and the actual antenna patterns of the Tandem-L mission proposal are considered.
- Open Access
- 17 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-17
A Synthetic Aperture Radar Imaging Mode Utilizing Frequency Scan for Time-of-Echo Compression
The synthetic aperture radar (SAR) imaging mode described in this paper utilizes the available signal bandwidth to form a narrow frequency-scanning transmit antenna beam illuminating the swath of interest from far to near range. The imaging technique is named frequency Scan for Time-of-Echo Compression (f-STEC), because, for a proper choice of mode parameters, the radar echo duration is reduced, i.e., compressed. The paper provides a detailed analysis of the f-STEC imaging technique; derives the operational and performance parameters as well as — to the authors knowledge — for the first time, analytic expressions for the f-STEC timing constraints. Further, the performance and trade-space is reported and compared to both conventional and modern, i.e., digital beamforming imaging modes. The f-STEC imaging technique is shown to be specifically advantageous for SAR systems operating at higher carrier frequencies or an attractive add-on for state-of-the-art SAR instruments.
- 17 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-17
Open AccessA Synthetic Aperture Radar Imaging Mode Utilizing Frequency Scan for Time-of-Echo Compression
The synthetic aperture radar (SAR) imaging mode described in this paper utilizes the available signal bandwidth to form a narrow frequency-scanning transmit antenna beam illuminating the swath of interest from far to near range. The imaging technique is named frequency Scan for Time-of-Echo Compression (f-STEC), because, for a proper choice of mode parameters, the radar echo duration is reduced, i.e., compressed. The paper provides a detailed analysis of the f-STEC imaging technique; derives the operational and performance parameters as well as — to the authors knowledge — for the first time, analytic expressions for the f-STEC timing constraints. Further, the performance and trade-space is reported and compared to both conventional and modern, i.e., digital beamforming imaging modes. The f-STEC imaging technique is shown to be specifically advantageous for SAR systems operating at higher carrier frequencies or an attractive add-on for state-of-the-art SAR instruments.
- Open Access
- 26 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-18
On-Ground RFI Mitigation for Spaceborne Multichannel SAR Systems Using Auxiliary Beams
Radio Frequency Interference (RFI) is becoming a major concern for future Synthetic Aperture Radar (SAR) missions due to the increased user demand for frequency occupation in a number of applications. Each occurrence of interference introduces artifacts in the radar imagery, biasing the measurements and leading to erroneous results. In addition to conventional techniques, the use of multichannel SAR for RFI mitigation has been proposed because its Digital Beamforming (DBF) capability allows for a spatial filtering of the received signals. Thereby, it becomes possible to remove RFI that arrives from a different direction than the SAR signal. Past publications on the topic presented highly flexible spatial filtering techniques. Those methods require either additional on-board processing or a substantial increase of the downlink capacity. This paper shows that by slightly reducing the flexibility of the spatial filtering, DBF can be utilized for RFI mitigation without either drawbacks: the processing is performed on-ground after downlinking the data and the data volume remains manageable. This is achieved with auxiliary beams. Their concept and limitations are discussed in detail in this paper and are supported with simulated RFI mitigation results. Furthermore, it is shown that the information collected with an auxiliary beam can also be used to filter the RFI signal when it is spatially non-orthogonal to the SAR signal.
- 26 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-18
Open AccessOn-Ground RFI Mitigation for Spaceborne Multichannel SAR Systems Using Auxiliary Beams
Radio Frequency Interference (RFI) is becoming a major concern for future Synthetic Aperture Radar (SAR) missions due to the increased user demand for frequency occupation in a number of applications. Each occurrence of interference introduces artifacts in the radar imagery, biasing the measurements and leading to erroneous results. In addition to conventional techniques, the use of multichannel SAR for RFI mitigation has been proposed because its Digital Beamforming (DBF) capability allows for a spatial filtering of the received signals. Thereby, it becomes possible to remove RFI that arrives from a different direction than the SAR signal. Past publications on the topic presented highly flexible spatial filtering techniques. Those methods require either additional on-board processing or a substantial increase of the downlink capacity. This paper shows that by slightly reducing the flexibility of the spatial filtering, DBF can be utilized for RFI mitigation without either drawbacks: the processing is performed on-ground after downlinking the data and the data volume remains manageable. This is achieved with auxiliary beams. Their concept and limitations are discussed in detail in this paper and are supported with simulated RFI mitigation results. Furthermore, it is shown that the information collected with an auxiliary beam can also be used to filter the RFI signal when it is spatially non-orthogonal to the SAR signal.
- 11 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 41, 1670-1672
On-Board RFI Detection for Reflector-Based Multichannel SAR Systems
Correcting for Radio Frequency Interference (RFI) has become a critical aspect of current and future Synthetic Aperture Radar (SAR) missions. While most RFI mitigation methods suffer significant drawbacks (e.g., loss of resolution) or require individual filter parameters for each acquisition, spatial filtering methods only rely on system design parameters, such as antenna size. Further, combining spatial filtering with digital beamforming (DBF) allows for the removal of in-swath interference while the instantaneous SAR and RFI signal arrive from different directions. One option to apply a DBF-based RFI mitigation on the ground in post processing are auxiliary beams. Hereby, the RFI is measured with simultaneous auxiliary beams and this information is downlinked at the cost of a small increase of data volume. This paper presents an on-board implementation of RFI detection, which can then be used to select the best auxiliary beams.
- 11 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 41, 1670-1672
On-Board RFI Detection for Reflector-Based Multichannel SAR Systems
Correcting for Radio Frequency Interference (RFI) has become a critical aspect of current and future Synthetic Aperture Radar (SAR) missions. While most RFI mitigation methods suffer significant drawbacks (e.g., loss of resolution) or require individual filter parameters for each acquisition, spatial filtering methods only rely on system design parameters, such as antenna size. Further, combining spatial filtering with digital beamforming (DBF) allows for the removal of in-swath interference while the instantaneous SAR and RFI signal arrive from different directions. One option to apply a DBF-based RFI mitigation on the ground in post processing are auxiliary beams. Hereby, the RFI is measured with simultaneous auxiliary beams and this information is downlinked at the cost of a small increase of data volume. This paper presents an on-board implementation of RFI detection, which can then be used to select the best auxiliary beams.
- Open Access
- 15 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Magazine
- Vol. 9 (2) , 121-124
Instrumentation and Future Technologies Technical Committee Working Groups [Technical Committees]
Presents information on the work of the GRSS Instrumentation and Future Technologies Technical Committee Working Groups.
- 15 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Magazine
- Vol. 9 (2) , 121-124
Open AccessInstrumentation and Future Technologies Technical Committee Working Groups [Technical Committees]
Presents information on the work of the GRSS Instrumentation and Future Technologies Technical Committee Working Groups.