Felipe Queiroz de Almeida
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Felipe Queiroz de Almeida has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Gerhard Krieger
German Aerospace Center (DLR), Microwaves and Radar Institute, 82234 Wessling, Germany
11 shared publications - Alberto Moreira
German Aerospace Center (DLR), Microwaves and Radar Institute, Weling, Germany
9 shared publications - Marwan Younis
Microwaves and Radar Institute, German Aerospace Center (DLR), 82234 Wessling, Germany
7 shared publications - Michelangelo Villano
German Aerospace Center (DLR), Microwaves and Radar Institute, 82234 Wessling, Germany
4 shared publications - Sigurd Huber
Microwaves and Radar Institute German Aerospace Center (DLR) Oberpfaffenhofen Germany
4 shared publications Marwan Younis
Microwaves and Radar Institute, German Aerospace Center (DLR), Oberpfaffenhofen, Germany
3 shared publications
Latest Publications
- Open Access
- 17 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-17
A Synthetic Aperture Radar Imaging Mode Utilizing Frequency Scan for Time-of-Echo Compression
The synthetic aperture radar (SAR) imaging mode described in this paper utilizes the available signal bandwidth to form a narrow frequency-scanning transmit antenna beam illuminating the swath of interest from far to near range. The imaging technique is named frequency Scan for Time-of-Echo Compression (f-STEC), because, for a proper choice of mode parameters, the radar echo duration is reduced, i.e., compressed. The paper provides a detailed analysis of the f-STEC imaging technique; derives the operational and performance parameters as well as — to the authors knowledge — for the first time, analytic expressions for the f-STEC timing constraints. Further, the performance and trade-space is reported and compared to both conventional and modern, i.e., digital beamforming imaging modes. The f-STEC imaging technique is shown to be specifically advantageous for SAR systems operating at higher carrier frequencies or an attractive add-on for state-of-the-art SAR instruments.
- 17 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-17
Open AccessA Synthetic Aperture Radar Imaging Mode Utilizing Frequency Scan for Time-of-Echo Compression
The synthetic aperture radar (SAR) imaging mode described in this paper utilizes the available signal bandwidth to form a narrow frequency-scanning transmit antenna beam illuminating the swath of interest from far to near range. The imaging technique is named frequency Scan for Time-of-Echo Compression (f-STEC), because, for a proper choice of mode parameters, the radar echo duration is reduced, i.e., compressed. The paper provides a detailed analysis of the f-STEC imaging technique; derives the operational and performance parameters as well as — to the authors knowledge — for the first time, analytic expressions for the f-STEC timing constraints. Further, the performance and trade-space is reported and compared to both conventional and modern, i.e., digital beamforming imaging modes. The f-STEC imaging technique is shown to be specifically advantageous for SAR systems operating at higher carrier frequencies or an attractive add-on for state-of-the-art SAR instruments.
- Open Access
- 20 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 19 (1545598X) , 1-5
Phase Correction for Accurate DOA Angle and Position Estimation of Ground-Moving Targets Using Multi-Channel Airborne Radar
Accurate position estimation of ground moving targets is a crucial requirement for any radar-based surveillance system. For multi-channel airborne radar, the target position on the ground can be accurately obtained by estimating the direction-of-arrival (DOA) angle of the moving targets. However, in practice the aircraft motion caused by atmospheric turbulence tilts the antenna array and introduces undesired phase differences among the multiple receive channels. As a result, the accuracy of the estimated DOA angles can be severely affected. This letter presents a robust and efficient algorithm that corrects the undesired phase differences among the multiple receive channels. By doing this, accurate DOA angles and, therefore, accurate target positions on the ground can be estimated. Important inputs of the proposed algorithm are the precise absolute positions of the receive channels and the elevation of the terrain. The performance of the proposed algorithm is validated using simulated data as well as radar data acquired with the DLR’s multi-channel airborne system DBFSAR.
- 20 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 19 (1545598X) , 1-5
Open AccessPhase Correction for Accurate DOA Angle and Position Estimation of Ground-Moving Targets Using Multi-Channel Airborne Radar
Accurate position estimation of ground moving targets is a crucial requirement for any radar-based surveillance system. For multi-channel airborne radar, the target position on the ground can be accurately obtained by estimating the direction-of-arrival (DOA) angle of the moving targets. However, in practice the aircraft motion caused by atmospheric turbulence tilts the antenna array and introduces undesired phase differences among the multiple receive channels. As a result, the accuracy of the estimated DOA angles can be severely affected. This letter presents a robust and efficient algorithm that corrects the undesired phase differences among the multiple receive channels. By doing this, accurate DOA angles and, therefore, accurate target positions on the ground can be estimated. Important inputs of the proposed algorithm are the precise absolute positions of the receive channels and the elevation of the terrain. The performance of the proposed algorithm is validated using simulated data as well as radar data acquired with the DLR’s multi-channel airborne system DBFSAR.
- 24 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 59 (7) , 5665-5686
Slow Pulse Repetition Interval Variation for High-Resolution Wide-Swath SAR Imaging
In the context of spaceborne synthetic aperture radar (SAR) imaging, high resolution and wide swath are inherently conflicting requirements. These may, however, be simultaneously satisfied by advanced imaging modes with multichannel architectures in elevation and/or azimuth. This article elaborates on a new mode based on multiple elevation beams and a simple pulse repetition interval (PRI) variation scheme which allows high-resolution wide-swath imaging. It is shown to use the illumination time more efficiently than ScanSAR and yet to be simpler than staggered SAR. Good SAR imaging performance is achieved with a rather compact antenna design. The proposed imaging mode is suitable for spaceborne SAR systems with planar and reflector antennas. In order to improve the imaging performance, a reflector antenna architecture with a multichannel feed in both elevation and azimuth is considered.
- 24 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 59 (7) , 5665-5686
Slow Pulse Repetition Interval Variation for High-Resolution Wide-Swath SAR Imaging
In the context of spaceborne synthetic aperture radar (SAR) imaging, high resolution and wide swath are inherently conflicting requirements. These may, however, be simultaneously satisfied by advanced imaging modes with multichannel architectures in elevation and/or azimuth. This article elaborates on a new mode based on multiple elevation beams and a simple pulse repetition interval (PRI) variation scheme which allows high-resolution wide-swath imaging. It is shown to use the illumination time more efficiently than ScanSAR and yet to be simpler than staggered SAR. Good SAR imaging performance is achieved with a rather compact antenna design. The proposed imaging mode is suitable for spaceborne SAR systems with planar and reflector antennas. In order to improve the imaging performance, a reflector antenna architecture with a multichannel feed in both elevation and azimuth is considered.
- 21 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Investigation into the Weight Update Rate for Scan-On-Receive Beamforming
Scan-On-Receive (SCORE) is a promising digital beamforming technique to improve the performance of SAR systems and enable high-resolution wide-swath concepts with multiple elevation beams. The technique is based on a beam-steering law which follows the angle-of-arrival of a pulse's echo traversing the ground. In practice, SCORE, also known as SweepSAR, is implemented on-board using digital processing, which implies discretized beam forming coefficients. This paper analyzes the implications of a beam switch to examine criteria for setting the necessary beam granularity and proposes a simple yet effective method to achieve pattern phase continuity.
- 21 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Investigation into the Weight Update Rate for Scan-On-Receive Beamforming
Scan-On-Receive (SCORE) is a promising digital beamforming technique to improve the performance of SAR systems and enable high-resolution wide-swath concepts with multiple elevation beams. The technique is based on a beam-steering law which follows the angle-of-arrival of a pulse's echo traversing the ground. In practice, SCORE, also known as SweepSAR, is implemented on-board using digital processing, which implies discretized beam forming coefficients. This paper analyzes the implications of a beam switch to examine criteria for setting the necessary beam granularity and proposes a simple yet effective method to achieve pattern phase continuity.
- 6 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 59 (4) , 3104-3121
In-Flight Multichannel Calibration for Along-Track Interferometric Airborne Radar
Multichannel calibration is essential for detecting moving targets and for estimating their positions and velocities accurately. This article presents a fast and efficient calibration algorithm for the along-track multichannel systems, in particular for space-time adaptive processing (STAP) techniques. The proposed algorithm corrects the phase and magnitude offsets of the receive channels and also takes into account the Doppler centroid variation (e.g., caused by atmospheric turbulences) along the slant range and the azimuth time. The knowledge of the Doppler centroid variation is especially important for an accurate clutter covariance matrix estimation, which is required by STAP for efficient clutter suppression. Important calibration parameters and offsets are estimated directly from the range-compressed training data. The proposed algorithm is evaluated based on real multichannel X-band radar data acquired with DLR's airborne system F-SAR and compared with the state-of-the-art digital channel balancing technique. The experimental results show the potential of the proposed calibration algorithm toward real-time applications.
- 6 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 59 (4) , 3104-3121
In-Flight Multichannel Calibration for Along-Track Interferometric Airborne Radar
Multichannel calibration is essential for detecting moving targets and for estimating their positions and velocities accurately. This article presents a fast and efficient calibration algorithm for the along-track multichannel systems, in particular for space-time adaptive processing (STAP) techniques. The proposed algorithm corrects the phase and magnitude offsets of the receive channels and also takes into account the Doppler centroid variation (e.g., caused by atmospheric turbulences) along the slant range and the azimuth time. The knowledge of the Doppler centroid variation is especially important for an accurate clutter covariance matrix estimation, which is required by STAP for efficient clutter suppression. Important calibration parameters and offsets are estimated directly from the range-compressed training data. The proposed algorithm is evaluated based on real multichannel X-band radar data acquired with DLR's airborne system F-SAR and compared with the state-of-the-art digital channel balancing technique. The experimental results show the potential of the proposed calibration algorithm toward real-time applications.
- Open Access
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 8316-8319
The Cost of Opportunity for Gapless Imaging
Utilizing digital multi-channel technology, spacebome synthetic aperture radar instruments are capable of imaging swath widths of hundreds of kilometers at fine azimuth resolution. The main benefit follows through the extension of the trade space and the use of new digital beam-forming techniques facilitated through the multi-channel instrument architecture. This is truly a quantum leap as the performance of these systems will be orders of magnitude better than current in-orbit and state-of-the art systems. One of the basic restrictions applicable to spaceborne platforms hosting both the transmitter and receiver is the "blinding" of the receiver during the transmit time instances, which manifests itself through imaging gaps. One of the main challenges the instrument designers are faced with, is to circumvent these gaps, requiring the use of dedicated instrument operation modes. An alternative approach is multi-beam imaging, i.e. to allow the gaps in the single SAR acquisition, while using an appropriate mission design for filling the blind gaps. This paper explores the trade space options for high-resolution wide-swath SAR imaging. The comparison of multi-beam and gapless imaging from an instrument design and performance point of view is elaborated.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 8316-8319
Open AccessThe Cost of Opportunity for Gapless Imaging
Utilizing digital multi-channel technology, spacebome synthetic aperture radar instruments are capable of imaging swath widths of hundreds of kilometers at fine azimuth resolution. The main benefit follows through the extension of the trade space and the use of new digital beam-forming techniques facilitated through the multi-channel instrument architecture. This is truly a quantum leap as the performance of these systems will be orders of magnitude better than current in-orbit and state-of-the art systems. One of the basic restrictions applicable to spaceborne platforms hosting both the transmitter and receiver is the "blinding" of the receiver during the transmit time instances, which manifests itself through imaging gaps. One of the main challenges the instrument designers are faced with, is to circumvent these gaps, requiring the use of dedicated instrument operation modes. An alternative approach is multi-beam imaging, i.e. to allow the gaps in the single SAR acquisition, while using an appropriate mission design for filling the blind gaps. This paper explores the trade space options for high-resolution wide-swath SAR imaging. The comparison of multi-beam and gapless imaging from an instrument design and performance point of view is elaborated.
- 22 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 55 (2) , 877-902
Multichannel Staggered SAR: System Concepts With Reflector and Planar Antennas
In the context of radar spaceborne imaging, the novel multichannel Staggered SAR mode represents a promising solution for the mapping of ultra-wide swaths with very high azimuth resolution. This paper extends the analysis of multichannel staggered SAR to planar antenna architectures and provides system design examples both for planar and reflector antenna architectures. Furthermore, a first proof of concept using measured data acquired by an experimental ground-based system is provided to demonstrate the approach's feasibility.
- 22 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 55 (2) , 877-902
Multichannel Staggered SAR: System Concepts With Reflector and Planar Antennas
In the context of radar spaceborne imaging, the novel multichannel Staggered SAR mode represents a promising solution for the mapping of ultra-wide swaths with very high azimuth resolution. This paper extends the analysis of multichannel staggered SAR to planar antenna architectures and provides system design examples both for planar and reflector antenna architectures. Furthermore, a first proof of concept using measured data acquired by an experimental ground-based system is provided to demonstrate the approach's feasibility.
- 12 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 56 (8) , 4792-4807
Tandem-L: A Technical Perspective on Future Spaceborne SAR Sensors for Earth Observation
Tandem-L is proposed as a spaceborne synthetic aperture radar (SAR) mission developed and operated by the German Aerospace Center in cooperation with several Helmholtz research centers and the German space industries. The mission concept comprises two fully polarimetric radar satellites providing monostatic and bistatic SAR imagery. A key feature of these SAR sensors is the employment of large lightweight unfurlable mesh reflectors fed by digital feed arrays. The main advantage of this new SAR system concept is the provision of large antenna apertures in space and flexible operation via reconfigurable feed electronics. By this, it becomes possible to map, for the first time, a continuous 350-km wide swath with a 7-m azimuth resolution with excellent noise equivalent sigma zero and ambiguity suppression. This paper shall give an overview on the technical aspects of the Tandem-L SAR instrument and antenna design. In particular, after a short review of the SAR system requirements, the concept of reflector SAR systems is outlined and the operation principle is presented. General guidelines for the design of array-fed reflector antennas with application to SAR imaging are given. Then, the optimization approach of the feed array design is detailed with a specific emphasis on a fixed beamforming concept in azimuth. In this context, also the problem of cross-pol pattern mitigation is addressed. These optimization steps are shown to be crucial for achieving the performance requirements in quad-pol acquisitions. Beamforming in elevation is performed onboard the spacecraft via digital hardware. This paper presents the beamforming architecture on receive for Tandem-L, which would apply in general for instance also to planar multielevation beam SAR antennas with Scan-On-Receive capabilities. Tandem-L is operated as a staggered SAR, which means varying the pulse repetition interval from pulse to pulse. In this context, the major design challenges are presented. Moreover, the impact of pulse staggering on the imaging performance is discussed. Tandem-L's SAR performance is presented by means of numerical simulations showing that the performance requirements imposed by the scientific user community could be met. The final part of this paper addresses options for high azimuth resolution imaging as well as a beamforming method for enhanced range ambiguity suppression.
- 12 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 56 (8) , 4792-4807
Tandem-L: A Technical Perspective on Future Spaceborne SAR Sensors for Earth Observation
Tandem-L is proposed as a spaceborne synthetic aperture radar (SAR) mission developed and operated by the German Aerospace Center in cooperation with several Helmholtz research centers and the German space industries. The mission concept comprises two fully polarimetric radar satellites providing monostatic and bistatic SAR imagery. A key feature of these SAR sensors is the employment of large lightweight unfurlable mesh reflectors fed by digital feed arrays. The main advantage of this new SAR system concept is the provision of large antenna apertures in space and flexible operation via reconfigurable feed electronics. By this, it becomes possible to map, for the first time, a continuous 350-km wide swath with a 7-m azimuth resolution with excellent noise equivalent sigma zero and ambiguity suppression. This paper shall give an overview on the technical aspects of the Tandem-L SAR instrument and antenna design. In particular, after a short review of the SAR system requirements, the concept of reflector SAR systems is outlined and the operation principle is presented. General guidelines for the design of array-fed reflector antennas with application to SAR imaging are given. Then, the optimization approach of the feed array design is detailed with a specific emphasis on a fixed beamforming concept in azimuth. In this context, also the problem of cross-pol pattern mitigation is addressed. These optimization steps are shown to be crucial for achieving the performance requirements in quad-pol acquisitions. Beamforming in elevation is performed onboard the spacecraft via digital hardware. This paper presents the beamforming architecture on receive for Tandem-L, which would apply in general for instance also to planar multielevation beam SAR antennas with Scan-On-Receive capabilities. Tandem-L is operated as a staggered SAR, which means varying the pulse repetition interval from pulse to pulse. In this context, the major design challenges are presented. Moreover, the impact of pulse staggering on the imaging performance is discussed. Tandem-L's SAR performance is presented by means of numerical simulations showing that the performance requirements imposed by the scientific user community could be met. The final part of this paper addresses options for high azimuth resolution imaging as well as a beamforming method for enhanced range ambiguity suppression.