Sune Veltzé
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Sune Veltzé has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Bhaskar Reddy Sudireddy
Department of Energy Conversion and Storage, Technical University of Denmark, Lyngby, Denmark
5 shared publications - Tânia Ramos
Department of Energy Conversion and Storage, Technical University of Denmark, Risø Campus, DK-4000 Roskilde, Denmark
5 shared publications - Luise Theil Kuhn
Department of Energy Conversion and Storage Technical University of Denmark Kgs. Lyngby Denmark
4 shared publications - Peter Holtappels
Technical University of Denmark
4 shared publications Andrew D. Bond
University of Southern Denmark, Department of Physics and Chemistry, Campusvej 55, 5230, Odense M, Denmark
3 shared publications- Christine J. McKenzie
Department of Physics, Chemistry and Pharmacy, University of Southern Denmark, Campusvej 55, 5230 Odense M, Denmark
3 shared publications
Latest Publications
- Open Access
- 30 July 2021
- Published by Walter de Gruyter GmbH in Pure and Applied Chemistry
- Vol. 93 (9) , 1049-1060
A unified pH scale for all solvents: part I – intention and reasoning (IUPAC Technical Report)
The definition of pH, its measurement and standard buffers, is well developed in aqueous solutions. Its definition in solvents other than water has been elaborated for a couple of solvents and their mixtures with water. However, the definition of a universal pH scale spanning all solvents and phases, not to mention standard procedures of measurement, is still a largely uncharted territory. UnipHied is a European collaboration and has the goal of putting the theoretical concept of an earlier introduced (2010) unified pH abs scale on a metrologically well-founded basis into practice. The pH abs scale enables the comparability of acidity between different phases. This article draws the connection of the concepts of unified acidity and secondary pH measurement.
- 30 July 2021
- Published by Walter de Gruyter GmbH in Pure and Applied Chemistry
- Vol. 93 (9) , 1049-1060
Open AccessA unified pH scale for all solvents: part I – intention and reasoning (IUPAC Technical Report)
The definition of pH, its measurement and standard buffers, is well developed in aqueous solutions. Its definition in solvents other than water has been elaborated for a couple of solvents and their mixtures with water. However, the definition of a universal pH scale spanning all solvents and phases, not to mention standard procedures of measurement, is still a largely uncharted territory. UnipHied is a European collaboration and has the goal of putting the theoretical concept of an earlier introduced (2010) unified pH abs scale on a metrologically well-founded basis into practice. The pH abs scale enables the comparability of acidity between different phases. This article draws the connection of the concepts of unified acidity and secondary pH measurement.
- 15 April 2020
- Published by Wiley in International Journal of Energy Research
- Vol. 44 (9) , 7158-7182
Electrochemical impedance spectroscopy study of commercial Li‐ion phosphate batteries: A metrology perspective
- 15 April 2020
- Published by Wiley in International Journal of Energy Research
- Vol. 44 (9) , 7158-7182
Electrochemical impedance spectroscopy study of commercial Li‐ion phosphate batteries: A metrology perspective
- 1 March 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 266, 293-304
Comparison between La0.6Sr0.4CoO3-d and LaNi0.6Co0.4O3-d infiltrated oxygen electrodes for long-term durable solid oxide fuel cells
- 1 March 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 266, 293-304
Comparison between La0.6Sr0.4CoO3-d and LaNi0.6Co0.4O3-d infiltrated oxygen electrodes for long-term durable solid oxide fuel cells
- 9 May 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (7) , F748-F758
On the Properties and Long-Term Stability of Infiltrated Lanthanum Cobalt Nickelates (LCN) in Solid Oxide Fuel Cell Cathodes
Infiltration as a fabrication method for solid oxide fuel cells (SOFC) electrodes is offering significant improvements in cell performance at reduced materials and fabrication costs, especially when combined with co-sintering. However, important questions regarding the long-term performance and microstructural stability remain unanswered. Here, we present the results of a three-year project, where large footprint anode-supported SOFCs with a co-sintered cathode backbone and infiltrated La0.95Co0.4Ni0.6O3 (LCN) cathodes were developed and thoroughly characterized. The initial long-term performance and stability of this new cell type was investigated for 1500+ hours, coupled with STEM-EDS investigation of the microstructural changes in the infiltrated electrodes. Additionally, electrodes were further aged at elevated temperatures (750 - 900°C) for periods reaching up to 5000 hours, while following changes in the electrode properties using SEM, BET area, and in-plane conductivity measurements. Finally, the mechanical properties of co-sintered cathode backbone cells were determined in four-point bending tests carried out both at room temperature and at 800°C in air. Based on these results, degradation mechanisms were identified and recommendation for safe operation conditions in real life application could be formulated.
- 9 May 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (7) , F748-F758
On the Properties and Long-Term Stability of Infiltrated Lanthanum Cobalt Nickelates (LCN) in Solid Oxide Fuel Cell Cathodes
Infiltration as a fabrication method for solid oxide fuel cells (SOFC) electrodes is offering significant improvements in cell performance at reduced materials and fabrication costs, especially when combined with co-sintering. However, important questions regarding the long-term performance and microstructural stability remain unanswered. Here, we present the results of a three-year project, where large footprint anode-supported SOFCs with a co-sintered cathode backbone and infiltrated La0.95Co0.4Ni0.6O3 (LCN) cathodes were developed and thoroughly characterized. The initial long-term performance and stability of this new cell type was investigated for 1500+ hours, coupled with STEM-EDS investigation of the microstructural changes in the infiltrated electrodes. Additionally, electrodes were further aged at elevated temperatures (750 - 900°C) for periods reaching up to 5000 hours, while following changes in the electrode properties using SEM, BET area, and in-plane conductivity measurements. Finally, the mechanical properties of co-sintered cathode backbone cells were determined in four-point bending tests carried out both at room temperature and at 800°C in air. Based on these results, degradation mechanisms were identified and recommendation for safe operation conditions in real life application could be formulated.
- 18 August 2014
- Published by Wiley in Fuel Cells
- Vol. 14 (6) , 1062-1065
Effect of Ru/CGO versus Ni/CGO Co‐Infiltration on the Performance and Stability of STN‐Based SOFCs
- 18 August 2014
- Published by Wiley in Fuel Cells
- Vol. 14 (6) , 1062-1065
Effect of Ru/CGO versus Ni/CGO Co‐Infiltration on the Performance and Stability of STN‐Based SOFCs
- 1 July 2014
- Published by Elsevier in Journal of Power Sources
- Vol. 258, 297-304
Instability and growth of nanoscale Ce0.8Gd0.2O1.9/NiO infiltrate in Sr0.94Ti0.9Nb0.1O3–Zr0.84Y0.16O1.92 anodes for solid oxide fuel cells
- 1 July 2014
- Published by Elsevier in Journal of Power Sources
- Vol. 258, 297-304
Instability and growth of nanoscale Ce0.8Gd0.2O1.9/NiO infiltrate in Sr0.94Ti0.9Nb0.1O3–Zr0.84Y0.16O1.92 anodes for solid oxide fuel cells
- 1 May 2014
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 39 (16) , 8215-8224
Influence of different carbon nanostructures on the electrocatalytic activity and stability of Pt supported electrocatalysts
- 1 May 2014
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 39 (16) , 8215-8224
Influence of different carbon nanostructures on the electrocatalytic activity and stability of Pt supported electrocatalysts
- 26 November 2013
- Published by The Electrochemical Society in ECS Electrochemistry Letters
- Vol. 3 (2) , F5-F6
Impedance and Stability of M/CGO (M: Ni, Pd, Ru) Co-infiltrated Nb-doped SrTiO3 SOFC Anodes
Preliminary impedance and stability of Sr0.94Ti0.9Nb0.1O3-δ/10 vol.% 8YSZ (STN94/YSZ) composite electrodes, M/CGO infiltrated (M: Ni, Pd and Ru), has been evaluated in symmetric configuration, at OCV, under various H2O/H2 atmospheres, with H2O contents between 3–50%, at 650–850°C. Initial total Rp at 850°C, 50% H2O/H2 decreased in the order Ni/CGO ⋙ Pd/CGO > Ru/CGO. After 200h of exposure Ru/CGO not only continued to exhibit low impedance, with final total Rp ≅ 0.02 Ωcm2, but also negligible degradation. For comparison, Ni/CGO degraded close to a factor of 3 to ca. 0.25 Ωcm2 in an equivalent period.
- 26 November 2013
- Published by The Electrochemical Society in ECS Electrochemistry Letters
- Vol. 3 (2) , F5-F6
Impedance and Stability of M/CGO (M: Ni, Pd, Ru) Co-infiltrated Nb-doped SrTiO3 SOFC Anodes
Preliminary impedance and stability of Sr0.94Ti0.9Nb0.1O3-δ/10 vol.% 8YSZ (STN94/YSZ) composite electrodes, M/CGO infiltrated (M: Ni, Pd and Ru), has been evaluated in symmetric configuration, at OCV, under various H2O/H2 atmospheres, with H2O contents between 3–50%, at 650–850°C. Initial total Rp at 850°C, 50% H2O/H2 decreased in the order Ni/CGO ⋙ Pd/CGO > Ru/CGO. After 200h of exposure Ru/CGO not only continued to exhibit low impedance, with final total Rp ≅ 0.02 Ωcm2, but also negligible degradation. For comparison, Ni/CGO degraded close to a factor of 3 to ca. 0.25 Ωcm2 in an equivalent period.
- 6 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 57 (1) , 1175-1184
Full Ceramic Fuel Cells Based on Strontium Titanate Anodes, an Approach towards More Robust SOFCs
The persistent problems with Ni-YSZ cermet based SOFCs, with respect to redox stability and tolerance towards sulfur has stimulated the development of a full ceramic cell based on strontium titanate(ST)- based anodes and anode support materials, within the EU FCH JU project SCOTAS-SOFC. Three different compositions (La, Y and Nb substituted ST) have been developed as anode backbones for either 25 cm2 or larger than 100 cm2 cell areas. Cell performances, once infiltrated with suitable electro catalysts, exhibited a maximum power density of 0.5 W/cm2 at 850 °C. While the ST based backbone remains intact and tolerant to redox cycles, cell performance degradation appears linked to the infiltrated electro catalysts. The materials have also been assessed with respect to their electrical and mechanical properties, in order to further evaluate their potential use as anode and anode support layers in SOFCs.
- 6 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 57 (1) , 1175-1184
Full Ceramic Fuel Cells Based on Strontium Titanate Anodes, an Approach towards More Robust SOFCs
The persistent problems with Ni-YSZ cermet based SOFCs, with respect to redox stability and tolerance towards sulfur has stimulated the development of a full ceramic cell based on strontium titanate(ST)- based anodes and anode support materials, within the EU FCH JU project SCOTAS-SOFC. Three different compositions (La, Y and Nb substituted ST) have been developed as anode backbones for either 25 cm2 or larger than 100 cm2 cell areas. Cell performances, once infiltrated with suitable electro catalysts, exhibited a maximum power density of 0.5 W/cm2 at 850 °C. While the ST based backbone remains intact and tolerant to redox cycles, cell performance degradation appears linked to the infiltrated electro catalysts. The materials have also been assessed with respect to their electrical and mechanical properties, in order to further evaluate their potential use as anode and anode support layers in SOFCs.
- 6 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 57 (1) , 743-752
Performance of Electrolyte Supported Solid Oxide Fuel Cells with STN Anodes
In order to replace the state of the art Ni-cermet as SOFC anode, electrolyte supported cells comprising CGO/Ni infiltrated Nb-doped SrTiO3 anodes, and LSM/YSZ cathodes have been developed and tested as single 5 x 5 cm2 cells. The initial performance reached 0.4 W/cm2 at 850 °C. Further tests under high fuel utilization and redox cycling have been performed to identify the performance limiting parameters in this new type of full ceramic SOFCs. Measured performances and stability have been further tentatively linked to modifications of the nano-sized infiltrates within the anode.
- 6 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 57 (1) , 743-752
Performance of Electrolyte Supported Solid Oxide Fuel Cells with STN Anodes
In order to replace the state of the art Ni-cermet as SOFC anode, electrolyte supported cells comprising CGO/Ni infiltrated Nb-doped SrTiO3 anodes, and LSM/YSZ cathodes have been developed and tested as single 5 x 5 cm2 cells. The initial performance reached 0.4 W/cm2 at 850 °C. Further tests under high fuel utilization and redox cycling have been performed to identify the performance limiting parameters in this new type of full ceramic SOFCs. Measured performances and stability have been further tentatively linked to modifications of the nano-sized infiltrates within the anode.