Farid Tootoonchian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Farid Tootoonchian has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Zahra Nasiri-Gheidari
Electrical Engineering Department, Sharif University of Technology, Tehran, Iran
36 shared publications - Fateme Zare
Isfahan University of Technology
9 shared publications - Hamid Saneie
Electrical Engineering Department, Sharif University of Technology, Tehran, Iran
9 shared publications - Mohammad Bahari
Faculty of Engineering and Natural Sciences, Unit of Automation Technology and Mechanical Engineering, Tampere University, Tampere, Finland
8 shared publications - Saeed Hajmohammadi
Department of Electrical Engineering, Sharif University of Technology, Tehran, Iran
7 shared publications - Hashem Oraee
Electrical Engineering Department, Sharif University of Technology, Tehran, Iran
5 shared publications
Latest Publications
- 8 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 9525108
SNR-Based Detection of Static and Dynamic Eccentricity in Resolvers
Accurate position estimation is essential for electrical machine control and commutation, making resolvers critical components. Due to low manufacturing cost and robustness in harsh environments, resolvers are used but remain vulnerable to mechanical faults—especially static eccentricity (SE) and dynamic eccentricity (DE)—which degrade accuracy. Hence resolver health monitoring is vital. This study presents a robust signal-to-noise ratio (SNR)-based algorithm for detecting mechanical faults under noisy conditions. Applicable to various resolver types (wound-rotor, WR; variable reluctance, VR) and winding schemes (overlapping and non-overlapping), the method uses the same signals employed for position estimation, removing the need for extra sensing channels. Fault detection analyzes deviations of the signal envelope from a healthy baseline by subtracting resized data windows aligned via maximum sample cross-correlation (SCC). The SNR, defined as the ratio of fundamental signal power to fault-induced components, serves as the evaluation metric. Validation through finite element analysis (FEA) and experiments demonstrates 99.5% detection accuracy with suitable computational burden.
- 8 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 9525108
SNR-Based Detection of Static and Dynamic Eccentricity in Resolvers
Accurate position estimation is essential for electrical machine control and commutation, making resolvers critical components. Due to low manufacturing cost and robustness in harsh environments, resolvers are used but remain vulnerable to mechanical faults—especially static eccentricity (SE) and dynamic eccentricity (DE)—which degrade accuracy. Hence resolver health monitoring is vital. This study presents a robust signal-to-noise ratio (SNR)-based algorithm for detecting mechanical faults under noisy conditions. Applicable to various resolver types (wound-rotor, WR; variable reluctance, VR) and winding schemes (overlapping and non-overlapping), the method uses the same signals employed for position estimation, removing the need for extra sensing channels. Fault detection analyzes deviations of the signal envelope from a healthy baseline by subtracting resized data windows aligned via maximum sample cross-correlation (SCC). The SNR, defined as the ratio of fundamental signal power to fault-induced components, serves as the evaluation metric. Validation through finite element analysis (FEA) and experiments demonstrates 99.5% detection accuracy with suitable computational burden.
- 14 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 9520608
Development of a High-Accuracy Variable Reluctance PCB Resolver With Sinusoidal Rotor
Sinusoidal rotor variable reluctance (SRVR) resolvers are promising candidates for position sensing due to their robustness and simple construction. Implementing these sensors with printed circuit board (PCB) windings reduces manufacturing cost and complexity; however, conventional PCB-based designs typically exhibit limited accuracy, with reported average absolute position errors commonly exceeding 0.040°, along with degraded signal quality. This paper introduces an improved SRVR PCB resolver featuring structural modifications to the rotor, excitation, and signal windings. A hybrid modeling approach is adopted to efficiently assess the proposed designs, showing improved output amplitude and reduced position error compared with conventional PCB implementations. An optimized prototype is fabricated and experimentally tested, validating the effectiveness of the proposed modifications. The results demonstrate that the developed PCB resolver achieves high accuracy of 0.032° (AAPE) and 0.081° (MPE), while maintaining manufacturing simplicity and low cost.
- 14 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 9520608
Development of a High-Accuracy Variable Reluctance PCB Resolver With Sinusoidal Rotor
Sinusoidal rotor variable reluctance (SRVR) resolvers are promising candidates for position sensing due to their robustness and simple construction. Implementing these sensors with printed circuit board (PCB) windings reduces manufacturing cost and complexity; however, conventional PCB-based designs typically exhibit limited accuracy, with reported average absolute position errors commonly exceeding 0.040°, along with degraded signal quality. This paper introduces an improved SRVR PCB resolver featuring structural modifications to the rotor, excitation, and signal windings. A hybrid modeling approach is adopted to efficiently assess the proposed designs, showing improved output amplitude and reduced position error compared with conventional PCB implementations. An optimized prototype is fabricated and experimentally tested, validating the effectiveness of the proposed modifications. The results demonstrate that the developed PCB resolver achieves high accuracy of 0.032° (AAPE) and 0.081° (MPE), while maintaining manufacturing simplicity and low cost.
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (7) , 9809-9816
Analysis and Compensation of Intrinsic Position Error in Resolvers for High-Accuracy Applications
Resolvers are essential components for precise position sensing in demanding industrial and automotive applications. Their accuracy is fundamentally limited by inherent imperfections. A significant challenge in both design and compensation is the difficulty in decoupling the position error originating from the magnetic structure from the velocity-induced error (rotational voltage). This paper proposes a new framework to address this challenge. The key innovations of this work are twofold: first, the introduction of a new analytical metric for quantifying the error caused purely by the magnetic structure, and second, the development of an effective compensation algorithm based on this analysis. We introduce the concept of "Intrinsic Position Error," which is isolated by analyzing induced voltages at the zero-crossing of the excitation current, showing it is a direct function of inductance harmonics. Based on this, a novel compensation algorithm is proposed which utilizes the harmonic characteristics of the error signal for a precise position correction. Finite Element Analysis (FEA) were performed to validate the proposed method. The results demonstrate the algorithm’s effectiveness, showing the average absolute position error is reduced by 92%. Experimental validation was conducted on a fabricated sensor prototype. The results showed a strong correlation with simulations, confirming the feasibility and effectiveness of the proposed compensation algorithm. This research provides a valuable tool for designers to optimize magnetic structures and a practical method for achieving high-accuracy position sensing.
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (7) , 9809-9816
Analysis and Compensation of Intrinsic Position Error in Resolvers for High-Accuracy Applications
Resolvers are essential components for precise position sensing in demanding industrial and automotive applications. Their accuracy is fundamentally limited by inherent imperfections. A significant challenge in both design and compensation is the difficulty in decoupling the position error originating from the magnetic structure from the velocity-induced error (rotational voltage). This paper proposes a new framework to address this challenge. The key innovations of this work are twofold: first, the introduction of a new analytical metric for quantifying the error caused purely by the magnetic structure, and second, the development of an effective compensation algorithm based on this analysis. We introduce the concept of "Intrinsic Position Error," which is isolated by analyzing induced voltages at the zero-crossing of the excitation current, showing it is a direct function of inductance harmonics. Based on this, a novel compensation algorithm is proposed which utilizes the harmonic characteristics of the error signal for a precise position correction. Finite Element Analysis (FEA) were performed to validate the proposed method. The results demonstrate the algorithm’s effectiveness, showing the average absolute position error is reduced by 92%. Experimental validation was conducted on a fabricated sensor prototype. The results showed a strong correlation with simulations, confirming the feasibility and effectiveness of the proposed compensation algorithm. This research provides a valuable tool for designers to optimize magnetic structures and a practical method for achieving high-accuracy position sensing.
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-8
A Robust and Fault-Tolerant Toroidal Wound-Rotor Synchro for High-Reliability Applications
The accuracy of Wound-Rotor (WR) synchros is highly sensitive to mechanical and electrical faults, which limits their reliability in critical industrial applications. This paper presents a novel, universally applicable fault-tolerant design for WR synchros, developed to ensure high accuracy and reliability under severe fault conditions. The proposed approach introduces a passive add-on Toroidal Short-Circuited Compensation Winding (TSCCW) integrated into a toroidal stator structure. Unlike conventional methods, this compensation strategy is compatible with diverse WR sensor topologies—including radial, axial, and linear—without requiring modifications to core design parameters. The effectiveness of the design was verified through comprehensive 3-D Time-Stepping Finite Element Analysis (TSFEA), which demonstrated simultaneous robustness against Rotary Transformer (RT) leakage flux, severe eccentricities (static, dynamic, and mixed), and inter-turn short-circuit faults. For example, under a 50% dynamic eccentricity fault, the proposed configuration achieved a 93% reduction in Average Absolute Position Error (AAPE). To further validate the findings, a prototype of the sensor was fabricated and experimentally tested. The experimental results closely matched the simulations, confirming the feasibility and effectiveness of the proposed compensation method for high-reliability applications.
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-8
A Robust and Fault-Tolerant Toroidal Wound-Rotor Synchro for High-Reliability Applications
The accuracy of Wound-Rotor (WR) synchros is highly sensitive to mechanical and electrical faults, which limits their reliability in critical industrial applications. This paper presents a novel, universally applicable fault-tolerant design for WR synchros, developed to ensure high accuracy and reliability under severe fault conditions. The proposed approach introduces a passive add-on Toroidal Short-Circuited Compensation Winding (TSCCW) integrated into a toroidal stator structure. Unlike conventional methods, this compensation strategy is compatible with diverse WR sensor topologies—including radial, axial, and linear—without requiring modifications to core design parameters. The effectiveness of the design was verified through comprehensive 3-D Time-Stepping Finite Element Analysis (TSFEA), which demonstrated simultaneous robustness against Rotary Transformer (RT) leakage flux, severe eccentricities (static, dynamic, and mixed), and inter-turn short-circuit faults. For example, under a 50% dynamic eccentricity fault, the proposed configuration achieved a 93% reduction in Average Absolute Position Error (AAPE). To further validate the findings, a prototype of the sensor was fabricated and experimentally tested. The experimental results closely matched the simulations, confirming the feasibility and effectiveness of the proposed compensation method for high-reliability applications.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9544808
Proposing a Resolver With a Robust Structure Under Static Eccentricity Fault
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9544808
Proposing a Resolver With a Robust Structure Under Static Eccentricity Fault
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 129608-129616
Novel Simplified Configuration for a Multi-Turn Variable Reluctance Resolver
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 129608-129616
Open AccessNovel Simplified Configuration for a Multi-Turn Variable Reluctance Resolver