Ali Mohamed Ali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ali Mohamed Ali has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Tsuyoshi Yoshitake
Department of Applied Science for Electronics and Materials, Kyushu University
5 shared publications - Mohamed Egiza
Department of Mechanical Engineering, Kafrelsheikh University, Kafrelsheikh 33516, Egypt
4 shared publications - Abdelrahman Zkria
Department of Applied Science for Electronics and Materials, Kyushu University
3 shared publications - Hiroshi Naragino
Department of Advanced Energy Science and Engineering Kyushu University Kasuga‐Koen Kasuga Fukuoka 816‐8580 Japan
3 shared publications Koki Murasawa
3 shared publications- Lama Osman
Department of Applied Science for Electronics and Materials, Kyushu University, Fukuoka 816-8580, Japan
3 shared publications
Latest Publications
- Open Access
- 24 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (9) , 3834-3842
Atomic Layer Etching of Nickel Using N 2 /H 2 Plasma Exposure and Hexafluoroacetylacetone
Nickel (Ni) and its aluminides are key materials in extreme ultraviolet lithography masks and nanoscale interconnects, where precise patterning is essential. However, the engineering of Ni-based intermetallics poses significant challenges due to their high physical stability and chemical inertness. This study introduces a plasma-enhanced atomic layer etching (ALE) method for Ni, relying on a surface modification by a N2/H2 plasma mixture followed by selective removal of the modified layer with hexafluoroacetylacetone vapor. Optimizing plasma chemistry, power, and exposure time promotes a controlled surface modification, which minimizes surface roughness and enhances process control. Half-reactions are shown to be self-limited, leading to an etch per cycle of 0.21 ± 0.03 nm at 350 °C. Periodic O2 plasma steps are incorporated to eliminate carbon residues from the surface. X-ray photoelectron spectroscopy reveals a mechanism involving surface nitridation and subsequent removal of the NixN layer. The ALE process is demonstrated on blanket substrates and assessed on prepatterned 3D nanostructures to examine the etching directionality. Transmission electron microscopy studies conducted on the blanket and 3D-structured Ni demonstrate the damage-free characteristics and anisotropic nature of the ALE process. The proposed method represents a significant advance in ALE technology and paves the way for anisotropic Ni patterning, which is essential for the fabrication of future nanoscale devices.
- 24 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (9) , 3834-3842
Open AccessAtomic Layer Etching of Nickel Using N 2 /H 2 Plasma Exposure and Hexafluoroacetylacetone
Nickel (Ni) and its aluminides are key materials in extreme ultraviolet lithography masks and nanoscale interconnects, where precise patterning is essential. However, the engineering of Ni-based intermetallics poses significant challenges due to their high physical stability and chemical inertness. This study introduces a plasma-enhanced atomic layer etching (ALE) method for Ni, relying on a surface modification by a N2/H2 plasma mixture followed by selective removal of the modified layer with hexafluoroacetylacetone vapor. Optimizing plasma chemistry, power, and exposure time promotes a controlled surface modification, which minimizes surface roughness and enhances process control. Half-reactions are shown to be self-limited, leading to an etch per cycle of 0.21 ± 0.03 nm at 350 °C. Periodic O2 plasma steps are incorporated to eliminate carbon residues from the surface. X-ray photoelectron spectroscopy reveals a mechanism involving surface nitridation and subsequent removal of the NixN layer. The ALE process is demonstrated on blanket substrates and assessed on prepatterned 3D nanostructures to examine the etching directionality. Transmission electron microscopy studies conducted on the blanket and 3D-structured Ni demonstrate the damage-free characteristics and anisotropic nature of the ALE process. The proposed method represents a significant advance in ALE technology and paves the way for anisotropic Ni patterning, which is essential for the fabrication of future nanoscale devices.
- Open Access
- 31 January 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Plasma nitridation for atomic layer etching of Ni
Nickel (Ni) and its alloys are important multifunctional materials for the fabrication of integrated circuits, as either the absorber for the extreme ultraviolet lithography masks and/or interconnect metals at the nanometer scale. However, these applications require that Ni to be patterned controllably, selectively, and anisotropically—requirements that can only be met with a plasma based atomic layer etch (ALE) process. In this work, a plasma-thermal ALE approach is developed to pattern Ni, utilizing a nitrogen plasma to form NixN at the surface, formic acid (FA) vapor to selectively remove the NixN layer, and a low-energy Ar+ sputter process to remove carbon residue left by the FA prior to the subsequent nitridation step. This three step ALE process was shown effective to etch Ni with a rate of 1.3 ± 0.17 nm/cycle while maintaining surface smoothness.
- 31 January 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Open AccessPlasma nitridation for atomic layer etching of Ni
Nickel (Ni) and its alloys are important multifunctional materials for the fabrication of integrated circuits, as either the absorber for the extreme ultraviolet lithography masks and/or interconnect metals at the nanometer scale. However, these applications require that Ni to be patterned controllably, selectively, and anisotropically—requirements that can only be met with a plasma based atomic layer etch (ALE) process. In this work, a plasma-thermal ALE approach is developed to pattern Ni, utilizing a nitrogen plasma to form NixN at the surface, formic acid (FA) vapor to selectively remove the NixN layer, and a low-energy Ar+ sputter process to remove carbon residue left by the FA prior to the subsequent nitridation step. This three step ALE process was shown effective to etch Ni with a rate of 1.3 ± 0.17 nm/cycle while maintaining surface smoothness.
- 1 July 2023
- Published by IOP Publishing in Applied Physics Express
- Vol. 16 (7) , 075501
Synergistic effects of optimal negative bias-enhanced growth of quenched-produced diamond films on titanium substrates
We report on negative bias-enhanced growth of quenched-produced diamond films on titanium using hybrid coaxial arc plasma deposition at room temperature. Optimizing the bias voltage to −40 V resulted in a spontaneous formation of a titanium carbide interfacial layer, which caused a significant increase in the adhesion strength from 16 to 48 N. Selective etching of undesired sp 2–C bonded atoms and ultrafast quenching of the energetic carbon ions (C+) promoted the growth of dense sp 3–C bonded atoms, achieving a superhardness of 96 GPa, comparable to natural diamond. These pioneering findings have the potential to revolutionize multifunctional materials for biomedical applications.
- 1 July 2023
- Published by IOP Publishing in Applied Physics Express
- Vol. 16 (7) , 075501
Synergistic effects of optimal negative bias-enhanced growth of quenched-produced diamond films on titanium substrates
We report on negative bias-enhanced growth of quenched-produced diamond films on titanium using hybrid coaxial arc plasma deposition at room temperature. Optimizing the bias voltage to −40 V resulted in a spontaneous formation of a titanium carbide interfacial layer, which caused a significant increase in the adhesion strength from 16 to 48 N. Selective etching of undesired sp 2–C bonded atoms and ultrafast quenching of the energetic carbon ions (C+) promoted the growth of dense sp 3–C bonded atoms, achieving a superhardness of 96 GPa, comparable to natural diamond. These pioneering findings have the potential to revolutionize multifunctional materials for biomedical applications.
- Open Access
- 1 June 2023
- Published by IOP Publishing in Materials Research Express
- Vol. 10 (6) , 066401
Influence of different pretreatments on the adhesion of nanodiamond composite films on Ti substrates via coaxial arc plasma deposition
In this study, we report on the novel growth of nanodiamond composite (NDC) films on titanium (Ti) substrates using the coaxial arc plasma deposition (CAPD) at room temperature, which offers several advantages over conventional growth techniques. CAPD employs a unique coaxial arc plasma gun structure that provides a supersaturated condition of highly energetic carbon ions (C+) for ultrafast quenching on the substrate, promoting the growth of nanodiamond grains. This allows for NDC films’ growth on diverse substrates without the need for initial seeding or substrate heating. However, the growth of NDC films on Ti substrates at room temperature is challenging due to the native oxide layer (TiO2). Here, we grew NDC films on Ti substrates using three different pretreatments: (i) hydrofluoric acid (HF) etching, (ii) insertion of a titanium carbide (TiC) intermediate layer, and (iii) in situ Ar+ plasma etching. The morphology and structure of the grown NDC films were examined by 3D laser, high-resolution scanning electron microscopies (HR-SEM), Raman, and x-ray photoelectron (XPS) spectroscopies. Our results demonstrate that in situ Ar+ plasma etching is the most effective pretreatment method for completely removing the native TiO2 layer compared to the other two ex situ pretreatments, in which re-oxidation is more likely to occur after these pretreatments. Furthermore, NDC films grown using the hybrid Ar+ ion etching gun (IG) and CAPD exhibit the highest sp 3 content (63%) and adhesion strength (16 N).
- 1 June 2023
- Published by IOP Publishing in Materials Research Express
- Vol. 10 (6) , 066401
Open AccessInfluence of different pretreatments on the adhesion of nanodiamond composite films on Ti substrates via coaxial arc plasma deposition
In this study, we report on the novel growth of nanodiamond composite (NDC) films on titanium (Ti) substrates using the coaxial arc plasma deposition (CAPD) at room temperature, which offers several advantages over conventional growth techniques. CAPD employs a unique coaxial arc plasma gun structure that provides a supersaturated condition of highly energetic carbon ions (C+) for ultrafast quenching on the substrate, promoting the growth of nanodiamond grains. This allows for NDC films’ growth on diverse substrates without the need for initial seeding or substrate heating. However, the growth of NDC films on Ti substrates at room temperature is challenging due to the native oxide layer (TiO2). Here, we grew NDC films on Ti substrates using three different pretreatments: (i) hydrofluoric acid (HF) etching, (ii) insertion of a titanium carbide (TiC) intermediate layer, and (iii) in situ Ar+ plasma etching. The morphology and structure of the grown NDC films were examined by 3D laser, high-resolution scanning electron microscopies (HR-SEM), Raman, and x-ray photoelectron (XPS) spectroscopies. Our results demonstrate that in situ Ar+ plasma etching is the most effective pretreatment method for completely removing the native TiO2 layer compared to the other two ex situ pretreatments, in which re-oxidation is more likely to occur after these pretreatments. Furthermore, NDC films grown using the hybrid Ar+ ion etching gun (IG) and CAPD exhibit the highest sp 3 content (63%) and adhesion strength (16 N).
- 31 October 2022
- Published by IOP Publishing in Applied Physics Express
- Vol. 15 (11) , 115004
Adhesion of nanodiamond composite films on Ti substrates at room temperature via hybrid ion etching gun and coaxial arc plasma deposition
It has been extremely difficult for nanodiamond composite (NDC) films to be deposited on Ti due to a large thermal expansion coefficient difference. The native oxide layer on Ti is another problem preventing the appropriate adhesion of NDC films and subsequent delamination. In this work, innovative room temperature adhesion of 3 μm NDC films with 54 GPa hardness on Ti substrates was accomplished via a hybrid system of ion etching gun and coaxial arc plasma deposition (CAPD). Ar+ plasma etching is capable to terminate the superficial TiO2 layer and manipulates substrate morphology during CAPD provides instantaneous deposition of NDC films at room temperature.
- 31 October 2022
- Published by IOP Publishing in Applied Physics Express
- Vol. 15 (11) , 115004
Adhesion of nanodiamond composite films on Ti substrates at room temperature via hybrid ion etching gun and coaxial arc plasma deposition
It has been extremely difficult for nanodiamond composite (NDC) films to be deposited on Ti due to a large thermal expansion coefficient difference. The native oxide layer on Ti is another problem preventing the appropriate adhesion of NDC films and subsequent delamination. In this work, innovative room temperature adhesion of 3 μm NDC films with 54 GPa hardness on Ti substrates was accomplished via a hybrid system of ion etching gun and coaxial arc plasma deposition (CAPD). Ar+ plasma etching is capable to terminate the superficial TiO2 layer and manipulates substrate morphology during CAPD provides instantaneous deposition of NDC films at room temperature.
- 11 May 2020
- Published by IOP Publishing in Applied Physics Express
Influence of adhesion intermediate layers on the stability of nanodiamond composite films deposited on Si substrates by coaxial arc plasma
Nanodiamond composite (NDC) films deposited on silicon substrates by coaxial-arc-plasma-deposition at room temperature are easily peeled off with increasing film thickness. This research adapted additional NDC intermediate layers deposited at high temperatures, to induce atomic-interdiffusion towards the Si substrates, which effectively enhances the adhesion of the intermediate layers with the substrates. In addition, the intermediate layers exhibit low internal stresses and hardnesses, and they can relieve large stresses of the top hard-layers. Consequently, the deposition of 1.5 μm thickness and 55 GPa hardness of NDC films on silicon substrates is possible, which opens up their applications in micro-electro-mechanical-systems and biosensors.
- 11 May 2020
- Published by IOP Publishing in Applied Physics Express
Influence of adhesion intermediate layers on the stability of nanodiamond composite films deposited on Si substrates by coaxial arc plasma
Nanodiamond composite (NDC) films deposited on silicon substrates by coaxial-arc-plasma-deposition at room temperature are easily peeled off with increasing film thickness. This research adapted additional NDC intermediate layers deposited at high temperatures, to induce atomic-interdiffusion towards the Si substrates, which effectively enhances the adhesion of the intermediate layers with the substrates. In addition, the intermediate layers exhibit low internal stresses and hardnesses, and they can relieve large stresses of the top hard-layers. Consequently, the deposition of 1.5 μm thickness and 55 GPa hardness of NDC films on silicon substrates is possible, which opens up their applications in micro-electro-mechanical-systems and biosensors.
- Open Access
- 27 January 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (4) , 041601
Near- and far-field Raman spectroscopic studies of nanodiamond composite films deposited by coaxial arc plasma
Raman spectroscopic studies on nanodiamond composite (NDC) films, comprising nano-sized diamond grains and an amorphous carbon (a-C) matrix, deposited by coaxial arc plasma deposition are challenging because the scattering of the nano-sized diamond grains competes with the strong signal of the a-C matrix. To unravel the nanocomposite structure of NDC films, both far- and near-field Raman spectroscopy were employed. Based on the comparison of visible and ultraviolet far-field Raman data, component spectra based on either nanodiamond or a-C were estimated by a peak-decomposition procedure based on band fitting. Near-field optical resolution achieved via tip-enhanced Raman spectroscopy reveals sharper peaks of both the nanodiamond and the amorphous carbon than the far-field spectra. Consequently, the peak-decomposition procedure is not required, which evidently indicates the effective detection of nanodiamond grains embedded in a-C matrices and is a direct result of the high spatial resolution that limits the number of probed grains. The size of the nanocrystals could additionally be estimated from the profile and position of a diamond peak. This work demonstrates that tip-enhanced Raman spectroscopy is a powerful nondestructive method for nanodiamond composite films, which allows direct access to parameters hitherto only available via average data.
- 27 January 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (4) , 041601
Open AccessNear- and far-field Raman spectroscopic studies of nanodiamond composite films deposited by coaxial arc plasma
Raman spectroscopic studies on nanodiamond composite (NDC) films, comprising nano-sized diamond grains and an amorphous carbon (a-C) matrix, deposited by coaxial arc plasma deposition are challenging because the scattering of the nano-sized diamond grains competes with the strong signal of the a-C matrix. To unravel the nanocomposite structure of NDC films, both far- and near-field Raman spectroscopy were employed. Based on the comparison of visible and ultraviolet far-field Raman data, component spectra based on either nanodiamond or a-C were estimated by a peak-decomposition procedure based on band fitting. Near-field optical resolution achieved via tip-enhanced Raman spectroscopy reveals sharper peaks of both the nanodiamond and the amorphous carbon than the far-field spectra. Consequently, the peak-decomposition procedure is not required, which evidently indicates the effective detection of nanodiamond grains embedded in a-C matrices and is a direct result of the high spatial resolution that limits the number of probed grains. The size of the nanocrystals could additionally be estimated from the profile and position of a diamond peak. This work demonstrates that tip-enhanced Raman spectroscopy is a powerful nondestructive method for nanodiamond composite films, which allows direct access to parameters hitherto only available via average data.