JBJohn K. Brennan

John K. Brennan

*This is an algorithmically generated author record based on publicly available information.

John K. Brennan has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Temporal scale-bridging of chemistry in a multiscale model: Simulating the shock-to-detonation transition of energetic materials

    by James P. Larentzos, Kenneth W. Leiter, John K. Brennan, Jaroslaw Knap

    We demonstrate the prediction of the shock Hugoniot behavior, shock-to-detonation transition, and detonation properties of a prototypical energetic material (EM), RDX (1,3,5-trinitro-1,3,5-triazinane), using a particle-based, coarse-grain (CG) modeling approach. We perform at-scale, head-to-head comparisons with continuum simulations performed within a hierarchical multiscale framework concurrently coupling a macroscale finite-element model to two microscale CG models. Both CG dissipative particle dynamics simulations and hierarchical multiscale simulations (HMS) are conducted to simulate and compare 1D-planar shock impacts of pristine, micrometer-to-millimeter-sized samples of RDX over a range of shock conditions. At sufficiently strong shock impacts, run distances to detonation are observed, detonation velocities are measured, and numerical Pop plots are constructed to demonstrate consistency between the CG modeling and HMS approaches. Overall, the at-scale, head-to-head comparisons between the microscale coarse-grain and multiscale finite-element models demonstrate the accuracy and effectiveness of the multiscale up-scaling approach to capture chemical kinetics while maintaining thermodynamic consistency across scales. The multiscale up-scaling approach introduced in this work enables simulation of millimeter-sized samples and provides a novel pathway to achieving microstructurally informed continuum models of EM formulations.

  • Three-dimensional pore collapse in shocked energetic crystals: Evaluating atomistics-consistent continuum models against molecular dynamics

    by Yen Nguyen, Jake Herrin, James P. Larentzos, John Brennan, H. S. Udaykumar

    The shock-induced collapse of three-dimensional (3D) pores in the energetic crystal RDX (1,3,5-trinitro-1,3,5-triazinane) is investigated using all-atom molecular dynamics (MD) and continuum simulations employing atomistics-consistent material models. We systematically investigate pore-collapse behavior by varying shock strengths and pore geometries, including spherical and ellipsoidal configurations. Transitions between strength (plasticity)-dominated and hydrodynamic collapse regimes are delineated, as well as the influence of pore orientation and length scale (nm to μm) on energy localization. By bridging atomistic and continuum descriptions, the study examines the role of three-dimensionality in hotspot formation and evaluates the accuracy of continuum predictions against MD benchmarks for inert pore collapse in RDX. We also evaluate atomistics-consistent material models for RDX, identifying aspects of pore collapse and hotspot formation that align with or deviate from MD. Differences between 3D and 2D pore collapse and hotspots are elucidated and aspects such as effects of crystalline anisotropy, orientation of elongated ellipsoidal pores, and pore size are assessed. This work points to avenues for further improvement of meso-scale models for predicting detonation initiation in RDX-based energetic materials in microstructure-aware multiscale frameworks.


  • Length scale and grid resolution effects in the simulation of shear and energy localization during pore collapse in shocked energetic crystals

    by Jacob Herrin, Chukwudubem Okafor, Catalin R. Picu, Tommy Sewell, John Brennan, James P. Larentzos, H. S. Udaykumar

    Previous works [Herrin et al., J. Appl. Phys. 136(13), 135901 (2024), Nguyen et al., J. Appl. Phys. 136(11), 114902 (2024)] obtained atomistics-consistent material models for two common energetic crystals, HMX (1,3,5,7-Tetranitro-1,3,5,7-tetrazocane) and RDX (1,3,5-Trinitro-1,3,5-triazinane) such that pore collapse calculations adhered closely to molecular dynamics (MD) results on key features of energy localization, particularly the appearance of shear bands, shapes of the collapsing pores, and the transition from viscoplastic to hydrodynamic collapse. However, only one pore size (of 50 nm diameter) was studied and some important aspects such as temperature distributions in the hotspot were found to be inconsistent with the atomistic models. One potential issue was noted but not resolved adequately in those works, namely, the grid resolution that should be employed in the meso-scale calculations for various pore sizes and shock strengths. Conventional computational mechanics guidelines for selecting meshes as fine as possible, balancing computational effort, accuracy, and grid independence, were shown not to produce physically consistent features associated with shear localization. Here, we examine the physics of pore collapse, shear band evolution and structure, and hotspot formation for both HMX and RDX; we then evaluate under what conditions atomistics-consistent models yield “physically correct” (considering MD as “ground truth”) hotspots for a range of pore diameters, from nm to micrometers, and for a wide range of shock strengths. The study provides insights into the effects of pore size and shock strength on pore collapse and hotspots, identifying aspects such as size-independent behaviors, and proportion of energy contained in shear as opposed to jet impact-heated regions of the hotspot.


  • Open Access

    Quantitative analysis of shear band formation around collapsing pores in shocked energetic organic crystals

    by Luke Weger, Jacob Herrin, Chukwudubem Okafor, James Larentzos, John Brennan, Tommy Sewell, Catalin R. Picu, H. S. Udaykumar

    Shear bands can play a significant role in energy localization in energetic crystals loaded under the high-pressure, high strain-rate conditions of shock waves. While the origin and growth of shear bands have been well studied and visualized in atomic crystalline solids (metals and alloys), as well as in amorphous materials (e.g., metallic glasses), they are less well understood in reactive low-symmetry organic energetic crystals. Recently developed atomistic-consistent material models for commonly studied energetic crystals, HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocane) and RDX (1,3,5-trinitro-1,3,5-triazinane), have been shown in meso-scale (continuum) simulations to produce shear bands in good agreement with molecular dynamics (MD). Here, by exercising this atomistic-consistent continuum model, we analyze meso-scale simulation-generated shear band patterns during shock-induced pore collapse in HMX and RDX, spanning a wide range of pore sizes and shock strengths. Quantitative pattern analysis of shear bands is performed to extract key metrics, such as spacings at various instants of pore collapse, shear band propagation velocities, etc. These metrics show good agreement with the corresponding MD data for HMX and RDX; we assess the quantitative characteristics of the simulated shear bands against theoretical scaling relationships for shear bands developed mostly in the context of metals. The characteristics of simulated shear bands, such as spacings and growth rates, are found to align well with thermomechanical instability theory. Shear band growth rates display the expected initial slow incipience, intermediate fast growth, and later fast extinction phases seen in experiments. This work indicates that the theory of shear band formation and growth from the surface of pores and defects appears to hold across solids with quite different molecular arrangements. Valuable insights are obtained that enhance our understanding of the contribution of shear banding mechanisms to energy localization in shocked energetic materials.


  • Open Access

    Pore collapse, shear bands, and hotspots using atomistics-consistent continuum models for RDX (1,3,5-trinitro-1,3,5-triazinane): Comparison with molecular dynamics calculations

    by Jacob Herrin, Garrett Tow, John Brennan, James Larentzos, Catalin R. Picu, H. S. Udaykumar

    Shock-induced energy localization is a crucial mechanism for determining shock sensitivity of energetic materials (EMs). Hotspots, i.e., localized areas of elevated temperature, arise when shocks interact with defects (cracks, pores, and interfaces) in the EM microstructure. The ignition and growth of hotspots in a shocked energetic material contribute to rapid chemical reactions that can couple with the passing shock wave, potentially leading to a self-sustained detonation wave. Predictive models for shock-to-detonation transition must correctly capture hotspot dynamics, which demands high-fidelity material models for meso-scale calculations. In this work, we deploy atomistics-guided material models for the energetic crystal RDX (1,3,5-trinitro-1,3,5-triazinane) and perform tandem continuum and all-atom molecular dynamics (MD) simulations. The computational setup for the continuum and MD simulations are nearly identical. The material models used for the calculations are derived from MD data, particularly the equations of state, rate-dependent Johnson–Cook strength model, and pressure-dependent shear modulus and melting temperature. We show that a modified Johnson–Cook model that accounts for shear-induced localization at the pore surface is necessary to represent well—relative to MD as the ground truth—the inelastic response of the crystal under a range of shock conditions. A head-to-head comparison of continuum and atomistic calculations across several metrics of pore collapse and energy deposition demonstrates that the continuum calculations are in good overall agreement with MD. Therefore, this work provides improved RDX material models to perform physically accurate meso-scale simulations, to enhance understanding of hot spot formation, and to use meso-scale hot spot data to inform macro-scale shock simulations.


  • Open Access

    Generalized energy-conserving dissipative particle dynamics with mass transfer: coupling between energy and mass exchange

    by Giuseppe Colella, Allan D. Mackie, James P. Larentzos, John K. Brennan, Martin Lísal, Josep Bonet Avalos

    The complete description of energy and material transport within the Generalized energy-conserving dissipative particle dynamics with mass transfer (GenDPDE-M) methodology is presented. In particular, the dynamic coupling between mass and energy is incorporated into the GenDPDE-M, which was previously introduced with dynamically decoupled fluxes (J. Bonet Avalos et al., J. Chem. Theory Comput. , 18 (12): 7639–7652, 2022). From a theoretical perspective, we have derived the appropriate Fluctuation-Dissipation theorems along with Onsager’s reciprocal relations, suitable for mesoscale models featuring this coupling. Equilibrium and non-equilibrium simulations are performed to demonstrate the internal thermodynamic consistency of the method, as well as the ability to capture the Ludwig–Soret effect, and tune its strength through the mesoscopic parameters. In view of the completeness of the presented approach, GenDPDE-M is the most general Lagrangian method to deal with complex fluids and systems at the mesoscale, where thermal agitation is relevant.


  • Open Access

    Johnson–Cook yield functions for cyclotetramethylene-tetranitramine (HMX) and cyclotrimethylene-trinitramine (RDX) derived from single crystal plasticity models

    by Oishik Sen, Pradeep K. Seshadri, Nirmal Kumar Rai, James Larentzos, John Brennan, Tommy Sewell, Catalin R. Picu, H. S. Udaykumar

    High-fidelity constitutive models are critical for accurate meso-scale continuum modeling and prediction of shock initiation of crystalline energetic materials (EMs). While empirically calibrated or atomistic-guided anisotropic elastoplastic models of EM such as cyclotetramethylene-tetranitramine (HMX) and cyclotrimethylene-trinitramine (RDX) capture important micromechanical phenomena (such as dislocation evolution, slip-resistance, and anisotropic elasticity), the computational cost of using anisotropic single-crystal plasticity models can become prohibitive for meso-scale computations of void-collapse and hotspot formation in microstructures. Thermo-mechanically representative, isotropic, pressure, temperature, and rate-dependent material constitutive models are practical alternatives for meso-scale simulations of the shock response of microstructures. To this end, this work constructs physically consistent isotropic plasticity from anisotropic single-crystal plasticity models for HMX and RDX. State-of-the-art crystal plasticity models for HMX and RDX are used to compute the stress states in single crystals oriented in three different directions relative to shocks generated by impact at velocities ranging from 100 to 1000 m/s. Post-shock von Mises stress fields for the three orientations are then used to calibrate the strain-rate hardening coefficient and the reference strain rate for a rate-dependent Johnson–Cook (JC) yield surface model. We compare the pressures and the post-shock von Mises stresses between the JC and the anisotropic models to show that the isotropic computations closely approximate the averaged deformation response of the three different crystal orientations. We then model the interaction of a shock generated by a 500 m/s impact with a 0.5 μm void and show that the pressures and the deviatoric stresses obtained using the isotropic model closely match those computed from anisotropic models for both HMX and RDX. The resulting isotropic J2 plastic flow model for HMX and RDX can be employed to perform meso-scale simulations for energy localization due to shear bands and void collapse in the two materials.


  • Maximum Entropy Theory of Multiscale Coarse-Graining via Matching Thermodynamic Forces: Application to a Molecular Crystal (TATB)

    by Sergei Izvekov, Matthew P. Kroonblawd, James P. Larentzos, John K. Brennan, Betsy M. Rice

    The MSCG/FM (multiscale coarse-graining via force-matching) approach is an efficient supervised machine learning method to develop microscopically informed coarse-grained (CG) models. We present a theory based on the principle of maximum entropy (PME) enveloping the existing MSCG/FM approaches. This theory views the MSCG/FM method as a special case of matching the thermodynamic forces from the extended ensemble described by the set of thermodynamic (relevant) system coordinates. This set may include CG coordinates, the stress tensor, applied external fields, and so forth, and may be characterized by nonequilibrium conditions. Following the presentation of the theory, we discuss the consistent matching of both bonded and nonbonded interactions. The proposed PME formulation is used as a starting point to extend the MSCG/FM method to the constant strain ensemble, which together with the explicit matching of the bonded forces is better suited for coarse-graining anisotropic media at a submolecular resolution. The theory is demonstrated by performing the fine coarse-graining of crystalline 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), a well-known insensitive molecular energetic material, which exhibits highly anisotropic mechanical properties.


  • Open Access

    Effect of shock-induced plastic deformation on mesoscale criticality of 1,3,5-trinitro-1,3,5-triazinane (RDX)

    by Brian H. Lee, James P. Larentzos, John K. Brennan, Alejandro Strachan

    Shock-induced plasticity and structural changes in energetic molecular crystals are well documented. These processes couple with the leading shock wave and affect its propagation, resulting in long, transient responses that are challenging to capture with all-atom simulations due to their time scale. Hence, the effects of this coupling and the transient shock response on the formation of hotspots and the initiation of chemistry remain unclear. To address these challenges, we investigate the role of shock-induced plastic deformation on shock initiation with a recently developed particle-based, coarse-grain model for 1,3,5-trinitro-1,3,5-triazinane (RDX) that utilizes the generalized dissipative particle dynamics with reactions framework. This model enables reactive simulations at micron length scales, which are required to achieve steady-state shock propagation. The simulations show that the shock Hugoniot response of RDX can involve transient behavior for up to 150 ps before steady-state behavior is achieved for shock strengths above the elastic limit. Pore collapse simulations demonstrate that the intensity of the resulting hotspot will weaken as the shock transitions from transient to steady-state behavior, ultimately affecting the shock-to-deflagration transition. Our results highlight the importance of considering the mesoscopic effects of shock-induced plastic deformation in simulations of shock-to-deflagration transitions of high explosives.


  • A coarse-grain reactive model of RDX: Molecular resolution at the μm scale

    by Brian H. Lee, Michael Neil Sakano, James P. Larentzos, John K. Brennan, Alejandro Strachan

    Predictive models for the thermal, chemical, and mechanical response of high explosives at extreme conditions are important for investigating their performance and safety. We introduce a particle-based, reactive model of 1,3,5-trinitro-1,3,5-triazinane (RDX) with molecular resolution utilizing generalized energy-conserving dissipative particle dynamics with reactions. The model is parameterized with respect to the data from atomistic molecular dynamics simulations as well as from quantum mechanical calculations, thus bridging atomic processes to the mesoscales, including microstructures and defects. It accurately captures the response of RDX under a range of thermal loading conditions compared to atomistic simulations. In addition, the Hugoniot response of the CG model in the overdriven regime reasonably matches atomistic simulations and experiments. Exploiting the model’s high computational efficiency, we investigate mesoscale systems involving millions of molecules and characterize size-dependent criticality of hotspots in RDX. The combination of accuracy and computational efficiency of our reactive model provides a tool for investigation of mesoscale phenomena, such as the role of microstructures and defects in the shock-to-deflagration transition, through particle-based simulation.