Jing-Jing Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jing-Jing Fang has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Yu-Ching Hsiao
Department of Mechanical Engineering, National Cheng Kung University, Tainan, Taiwan
9 shared publications - Cheng-Li Lin
Department of Orthopedic Surgery, National Cheng Kung University Hospital, College of Medicine, National Cheng Kung University, Tainan, Taiwan
3 shared publications - Chen-Jung Chang
Division of Orthodontics, Department of Stomatology, National Cheng Kung University Hospital, College of Medicine, National Cheng Kung University, Tainan 704, Taiwan
2 shared publications - Chih-Ju Chang
Cathay General Hospital
2 shared publications Ruey-Mo Lin
Tainan Municipal An-Nan Hospital, China Medical University, Tainan, TAIWAN
2 shared publications- Ruey-Mo Lin
Department of Orthopedics, National Cheng Kung, University, Medical University, Tainan, Taiwan
2 shared publications
Latest Publications
- Open Access
- 22 April 2026
- Published by IOP Publishing in Medical Engineering & Physics
- Vol. 147 (5) , 055006
Immobilization and comfort assessment in customized 3D-printed cervical orthosis
Customized 3D-printed cervical orthoses usually offer better fit and support. However, clinical evidence regarding the effectiveness of immobilization and comfort remains limited. This study aims to compare the effectiveness of custom-made cervical orthoses with that of commercially available orthoses in preventing pressure ulcers (PUs), improving immobilization, and providing comfort and ease of use. We measured the risk of PUs associated with six neck postures to assess comfort and immobilization when participants wore their orthosis. The customized cervical orthosis provided significantly greater immobilization than the Aspen Vista collar across all six neck postures (p < 0.05). No significant differences in comfort and user preference were observed between the two orthoses. The customized cervical orthosis offers superior immobilization compared to the Aspen Vista collar; however, it may increase pressure on the mastoid processes. While comfort is comparable to commercial options, customized orthosis improvements are needed to reduce pressure without sacrificing immobilization.
- 22 April 2026
- Published by IOP Publishing in Medical Engineering & Physics
- Vol. 147 (5) , 055006
Open AccessImmobilization and comfort assessment in customized 3D-printed cervical orthosis
Customized 3D-printed cervical orthoses usually offer better fit and support. However, clinical evidence regarding the effectiveness of immobilization and comfort remains limited. This study aims to compare the effectiveness of custom-made cervical orthoses with that of commercially available orthoses in preventing pressure ulcers (PUs), improving immobilization, and providing comfort and ease of use. We measured the risk of PUs associated with six neck postures to assess comfort and immobilization when participants wore their orthosis. The customized cervical orthosis provided significantly greater immobilization than the Aspen Vista collar across all six neck postures (p < 0.05). No significant differences in comfort and user preference were observed between the two orthoses. The customized cervical orthosis offers superior immobilization compared to the Aspen Vista collar; however, it may increase pressure on the mastoid processes. While comfort is comparable to commercial options, customized orthosis improvements are needed to reduce pressure without sacrificing immobilization.
- Open Access
- 22 January 2026
- Published by Springer Nature in Neurosurgical Review
- Vol. 49 (1) , 143
A novel bone screw implantation strategy in C1-2 instability: a framework for evolving high cervical spine surgery
Fixation surgery for atlantoaxial instability (AAI) or atlantoaxial subluxation is recognized as a complex and high-risk procedure, prompting the development of various fixation techniques. In this preliminary study, we evaluated the safety and accuracy of C1-2 pedicle screw insertion using our developed planning software and 3D-printed guiding templates. We also analyzed feasibility with free-hand techniques to identify an optimal strategy for atlantoaxial fixation. We used a self-developed 3D planning method, along with guiding template techniques, for pedicle screws in high cervical vertebra fixation. A small cohort of thirteen patients in Group 1 received free-hand screw placement, while seventeen in Group 2 performed using the planning and guiding system. We analyzed demographics, complications, and screw placement precision. We compared the demographics, operative time, and blood loss between the two groups. Complications occurred in patients from Group 1, but none in those from Group 2. Most Group 2 patients underwent the C1 and C2 pedicle screws approach, which showed significantly higher screw placement safety. Both pedicle screws applied in C1 and C2 are preferable to occipitocervical fusion when feasible. The planning strategy and its associated guiding system improve the implanted screws precision and safety of pedicle screw placement, particularly in cases with high-riding vertebral arteries. When the C2 pedicle diameter exceeds 3 mm, we safely perform the C2 pedicle screws. This method supports more precise preoperative planning for atlantoaxial instability.
- 22 January 2026
- Published by Springer Nature in Neurosurgical Review
- Vol. 49 (1) , 143
Open AccessA novel bone screw implantation strategy in C1-2 instability: a framework for evolving high cervical spine surgery
Fixation surgery for atlantoaxial instability (AAI) or atlantoaxial subluxation is recognized as a complex and high-risk procedure, prompting the development of various fixation techniques. In this preliminary study, we evaluated the safety and accuracy of C1-2 pedicle screw insertion using our developed planning software and 3D-printed guiding templates. We also analyzed feasibility with free-hand techniques to identify an optimal strategy for atlantoaxial fixation. We used a self-developed 3D planning method, along with guiding template techniques, for pedicle screws in high cervical vertebra fixation. A small cohort of thirteen patients in Group 1 received free-hand screw placement, while seventeen in Group 2 performed using the planning and guiding system. We analyzed demographics, complications, and screw placement precision. We compared the demographics, operative time, and blood loss between the two groups. Complications occurred in patients from Group 1, but none in those from Group 2. Most Group 2 patients underwent the C1 and C2 pedicle screws approach, which showed significantly higher screw placement safety. Both pedicle screws applied in C1 and C2 are preferable to occipitocervical fusion when feasible. The planning strategy and its associated guiding system improve the implanted screws precision and safety of pedicle screw placement, particularly in cases with high-riding vertebral arteries. When the C2 pedicle diameter exceeds 3 mm, we safely perform the C2 pedicle screws. This method supports more precise preoperative planning for atlantoaxial instability.
- Open Access
- 19 March 2025
- Published by IOP Publishing in Biomedical Physics & Engineering Express
- Vol. 11 (3) , 037001
A facebow-free technique for mechanical articulator remounting using computed tomography
This technical note introduces a technique for remounting dental casts to a mechanical articulator using computed tomography (CT) without a facebow. We have developed a jig method that ensures precise remounting by aligning the virtual dental casts to the upper and lower jaw models reconstructed from the CT and transferring them to a virtual articulator based on anatomical landmarks. A custom-designed positioning jig and splint further enhance the accuracy of the process, preserving the spatial relationship between the midface and mandible. The proposed mounting jig technique can help transfer the patient’s maxillomandibular relationship quickly, repeatedly, and accurately to an articulator after the patient leaves.
- 19 March 2025
- Published by IOP Publishing in Biomedical Physics & Engineering Express
- Vol. 11 (3) , 037001
Open AccessA facebow-free technique for mechanical articulator remounting using computed tomography
This technical note introduces a technique for remounting dental casts to a mechanical articulator using computed tomography (CT) without a facebow. We have developed a jig method that ensures precise remounting by aligning the virtual dental casts to the upper and lower jaw models reconstructed from the CT and transferring them to a virtual articulator based on anatomical landmarks. A custom-designed positioning jig and splint further enhance the accuracy of the process, preserving the spatial relationship between the midface and mandible. The proposed mounting jig technique can help transfer the patient’s maxillomandibular relationship quickly, repeatedly, and accurately to an articulator after the patient leaves.
- Open Access
- 22 August 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (16) , 7424
Anatomical-Based Customized Cervical Orthosis Design in Automation
Cervical orthoses, vital for neck immobilization in medical care and sports, often struggle to provide adequate support due to individual neck shape and size variations. This study addresses this issue by developing a specific computer-aided orthosis design software tailored for creating customized 3D-printed cervical orthoses. The self-developed software embedded anatomical and rehabilitation knowledge into the orthosis design process, ensuring consistency and reducing manual modification. Finite element analysis of cervical orthoses determined that a minimum thickness of 5 mm PLA (polylactic acid) material is necessary to meet safety requirements. This study highlights the automation potential of customized computer-aided orthosis design and underscores the potential to revolutionize orthopedic care. We also applied easy-to-access 3D printing technology to fabricate well-fitting and immobilized cervical orthoses. These customized cervical orthoses offer a promising future with the advantages of being cost-effective, lightweight, immobility, comfortable, easy to wear, and minimal accessories to meet clinical needs, enhancing patient comfort and compliance and providing reassurance about the economic benefits of the technology.
- 22 August 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (16) , 7424
Open AccessAnatomical-Based Customized Cervical Orthosis Design in Automation
Cervical orthoses, vital for neck immobilization in medical care and sports, often struggle to provide adequate support due to individual neck shape and size variations. This study addresses this issue by developing a specific computer-aided orthosis design software tailored for creating customized 3D-printed cervical orthoses. The self-developed software embedded anatomical and rehabilitation knowledge into the orthosis design process, ensuring consistency and reducing manual modification. Finite element analysis of cervical orthoses determined that a minimum thickness of 5 mm PLA (polylactic acid) material is necessary to meet safety requirements. This study highlights the automation potential of customized computer-aided orthosis design and underscores the potential to revolutionize orthopedic care. We also applied easy-to-access 3D printing technology to fabricate well-fitting and immobilized cervical orthoses. These customized cervical orthoses offer a promising future with the advantages of being cost-effective, lightweight, immobility, comfortable, easy to wear, and minimal accessories to meet clinical needs, enhancing patient comfort and compliance and providing reassurance about the economic benefits of the technology.
- 23 May 2024
- Published by Elsevier in World Neurosurgery
- Vol. 188, e357-e366
A Three-Dimensional Morphological Assessment for Evaluating Pre- and Postsurgery in Cervical Laminoplasty
- 23 May 2024
- Published by Elsevier in World Neurosurgery
- Vol. 188, e357-e366
A Three-Dimensional Morphological Assessment for Evaluating Pre- and Postsurgery in Cervical Laminoplasty
- Open Access
- 19 April 2024
- Published by Wolters Kluwer Health in Medicine
- Vol. 103 (16) , e37868
Metacarpophalangeal joint reconstruction using a costal osteochondral graft: A case report
Rationale: The conventional treatment of giant cell tumors is intralesional curettage with local adjuvant therapy. Because hand tumors have a high local recurrence, the primary goal for treating tumors of the hand is to eradicate the lesion. Patient concerns: To preserve the metacarpophalangeal (MCP) joint function as well as avoid further recurrence after surgery. Diagnoses: The giant cell tumor invades the patient’s MCP joint in an index proximal phalanx. Interventions: Using computer-aided design and three-dimensional printing techniques, we reformed the original shapes of the MCP joint and its peripheral bone to replica models. The surgeon then performed an en bloc resection and proximal phalanx with MCP joint reconstruction by fabricating the patient’s costal osteochondral graft during the operation. Outcomes: After 6 months of rehabilitation, the patient’s finger functions could pinch and grasp objects naturally. At the 1-year follow-up, the range of motion of the MCP, proximal interphalangeal, and distal interphalangeal joints improved from flexion of 35° to 60°, 75° to 85°, and 60° to 80°, respectively. The hand function achieved the mean performance of non-preferred hands for young females at the postoperative 3-year follow-up. Lessons: The customized prototyping technique has the potential to replica the original patient’s bony graft to reach the goal of minimizing the defects at the donor site and maximizing the function of the reconstructed MCP joint.
- 19 April 2024
- Published by Wolters Kluwer Health in Medicine
- Vol. 103 (16) , e37868
Open AccessMetacarpophalangeal joint reconstruction using a costal osteochondral graft: A case report
Rationale: The conventional treatment of giant cell tumors is intralesional curettage with local adjuvant therapy. Because hand tumors have a high local recurrence, the primary goal for treating tumors of the hand is to eradicate the lesion. Patient concerns: To preserve the metacarpophalangeal (MCP) joint function as well as avoid further recurrence after surgery. Diagnoses: The giant cell tumor invades the patient’s MCP joint in an index proximal phalanx. Interventions: Using computer-aided design and three-dimensional printing techniques, we reformed the original shapes of the MCP joint and its peripheral bone to replica models. The surgeon then performed an en bloc resection and proximal phalanx with MCP joint reconstruction by fabricating the patient’s costal osteochondral graft during the operation. Outcomes: After 6 months of rehabilitation, the patient’s finger functions could pinch and grasp objects naturally. At the 1-year follow-up, the range of motion of the MCP, proximal interphalangeal, and distal interphalangeal joints improved from flexion of 35° to 60°, 75° to 85°, and 60° to 80°, respectively. The hand function achieved the mean performance of non-preferred hands for young females at the postoperative 3-year follow-up. Lessons: The customized prototyping technique has the potential to replica the original patient’s bony graft to reach the goal of minimizing the defects at the donor site and maximizing the function of the reconstructed MCP joint.
- Open Access
Characteristics of Midface Asymmetry in Skeletal Class III Malocclusion Using Three-Dimensional Analysis
Background: The midface plays an important role in the judgment of symmetry. However, studies on three-dimensional analyses of midface asymmetry are limited. This study investigated the characteristics of midface asymmetry in skeletal Class III malocclusion patients through three-dimensional analysis. Methods: Sixty-eight adult subjects with skeletal Class III malocclusion were included and divided into mandible symmetry and asymmetry groups. The prevalence of recognizable malar asymmetry and the deviation of anterior nasal spine (ANS) were examined. The relation between midface and mandible asymmetry were investigated with Spearman correlation. The difference in distance of landmarks to reference planes were compared between the two groups using Mann–Whitney U test (p < 0.05). Results: The overall prevalence of malar asymmetry was 7.35% and of ANS deviation was 38.24%. In subjects with chin deviated to the right, there was a moderate negative correlation between chin deviation and difference of zygion and zygomatic process to mid-sagittal plane. The absolute value of difference in the glenoid fossa was significantly greater in female asymmetry subjects. Conclusions: The prevalence of midface asymmetry is not low. The more severely the chin is shifted, the greater asymmetrical position of the zygoma and glenoid fossa was found. Therefore, pre-surgical case-by-case evaluation of the midface region is essential for understanding the midface skeletal characteristics of Class III patients with chin deviation, thereby providing patients with realistic expectations and optimizing surgical outcomes and patient satisfaction.
Open AccessCharacteristics of Midface Asymmetry in Skeletal Class III Malocclusion Using Three-Dimensional Analysis
Background: The midface plays an important role in the judgment of symmetry. However, studies on three-dimensional analyses of midface asymmetry are limited. This study investigated the characteristics of midface asymmetry in skeletal Class III malocclusion patients through three-dimensional analysis. Methods: Sixty-eight adult subjects with skeletal Class III malocclusion were included and divided into mandible symmetry and asymmetry groups. The prevalence of recognizable malar asymmetry and the deviation of anterior nasal spine (ANS) were examined. The relation between midface and mandible asymmetry were investigated with Spearman correlation. The difference in distance of landmarks to reference planes were compared between the two groups using Mann–Whitney U test (p < 0.05). Results: The overall prevalence of malar asymmetry was 7.35% and of ANS deviation was 38.24%. In subjects with chin deviated to the right, there was a moderate negative correlation between chin deviation and difference of zygion and zygomatic process to mid-sagittal plane. The absolute value of difference in the glenoid fossa was significantly greater in female asymmetry subjects. Conclusions: The prevalence of midface asymmetry is not low. The more severely the chin is shifted, the greater asymmetrical position of the zygoma and glenoid fossa was found. Therefore, pre-surgical case-by-case evaluation of the midface region is essential for understanding the midface skeletal characteristics of Class III patients with chin deviation, thereby providing patients with realistic expectations and optimizing surgical outcomes and patient satisfaction.
- Open Access
- 6 March 2023
- Published by MDPI AG in Bioengineering
- Vol. 10 (3) , 335
A Symmetry-Based Superposition Method for Planning and Surgical Outcome Assessment
Computer-aided surgical planning has been widely used to increase the safety and predictability of surgery. The validation of the target of surgical planning to surgical outcomes on a patient-specific model is an important issue. The aim of this research was to develop a robust superposition method to assess the deviation of planning and outcome by using the symmetrical characteristic of the affected target. The optimal symmetry plane (OSP) of an object is usually used to evaluate the degree of symmetry of an object. We proposed a refined OSP-based contouring method to transfer a complex three-dimensional superposition operation into two dimensions. We compared the typical iterative closest point (ICP) algorithm with the refined OSP-based contouring method and examined the differences between them. The results using the OSP-based method were much better than the traditional method. As for processing time, the OSP-based contouring method was 11 times faster than the ICP method overall. The proposed method was not affected by the metallic artifacts from medical imaging or geometric changes due to surgical intervention. This technique can be applied for post-operative assessment, such as quantifying the differences between surgical targets and outcomes as well as performing long-term medical follow-up.
- 6 March 2023
- Published by MDPI AG in Bioengineering
- Vol. 10 (3) , 335
Open AccessA Symmetry-Based Superposition Method for Planning and Surgical Outcome Assessment
Computer-aided surgical planning has been widely used to increase the safety and predictability of surgery. The validation of the target of surgical planning to surgical outcomes on a patient-specific model is an important issue. The aim of this research was to develop a robust superposition method to assess the deviation of planning and outcome by using the symmetrical characteristic of the affected target. The optimal symmetry plane (OSP) of an object is usually used to evaluate the degree of symmetry of an object. We proposed a refined OSP-based contouring method to transfer a complex three-dimensional superposition operation into two dimensions. We compared the typical iterative closest point (ICP) algorithm with the refined OSP-based contouring method and examined the differences between them. The results using the OSP-based method were much better than the traditional method. As for processing time, the OSP-based contouring method was 11 times faster than the ICP method overall. The proposed method was not affected by the metallic artifacts from medical imaging or geometric changes due to surgical intervention. This technique can be applied for post-operative assessment, such as quantifying the differences between surgical targets and outcomes as well as performing long-term medical follow-up.
- Open Access
- 14 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11538
Clinical Assessment of Customized 3D-Printed Wrist Orthoses
Plaster casting has been effective in fracture rehabilitation due to its immobility capability. Thermoplastic casting gains some efficiency and convenience from clinical processing but fitting and immobility are two major tradeoffs. Three-dimensional (3D)-printed braces have demonstrated improvements in innovation, customization, and appearance, but one may question their effectiveness in rehabilitation. Via a science-based data-centric approach, we evaluated the feasibility of customizing 3D-printed braces for wrist fractures after surgery. First, we established a framework for determining a proper timeframe for reliable pressure measurement for plaster casts, devised a method to evaluate the immobilization capability of the plaster casts and customized braces, and assessed changes in immobilization capability due to the clearance adjustment of customized braces. Second, we compared the customized wrist braces and plaster casts in immobilization capability and functional effectiveness in clinical trials. Thirty-three patients were recruited (9, control; 24, experimental). Both the Disability of Arm, Shoulder, and Head, and the Manual Ability Measure surveys showed significant differences between the control and experimental groups after brace wearing time frames of 2, 4, 8, and 12 weeks, and 6 and 12 months. We found that customized braces can match plaster casts in immobilization ability and can promote effective functional recovery.
- 14 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11538
Open AccessClinical Assessment of Customized 3D-Printed Wrist Orthoses
Plaster casting has been effective in fracture rehabilitation due to its immobility capability. Thermoplastic casting gains some efficiency and convenience from clinical processing but fitting and immobility are two major tradeoffs. Three-dimensional (3D)-printed braces have demonstrated improvements in innovation, customization, and appearance, but one may question their effectiveness in rehabilitation. Via a science-based data-centric approach, we evaluated the feasibility of customizing 3D-printed braces for wrist fractures after surgery. First, we established a framework for determining a proper timeframe for reliable pressure measurement for plaster casts, devised a method to evaluate the immobilization capability of the plaster casts and customized braces, and assessed changes in immobilization capability due to the clearance adjustment of customized braces. Second, we compared the customized wrist braces and plaster casts in immobilization capability and functional effectiveness in clinical trials. Thirty-three patients were recruited (9, control; 24, experimental). Both the Disability of Arm, Shoulder, and Head, and the Manual Ability Measure surveys showed significant differences between the control and experimental groups after brace wearing time frames of 2, 4, 8, and 12 weeks, and 6 and 12 months. We found that customized braces can match plaster casts in immobilization ability and can promote effective functional recovery.
- Open Access
- 26 September 2022
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 11 (19) , 5689
An Automatic Voxel-Based Method for Optimal Symmetry Plane Generation for the Maxillofacial Region in Severe Asymmetry Cases
Symmetry is representative of aesthetics and health in all kinds of vertebrates, especially the human face. Therefore, to automatically locate the appropriate symmetry plane is crucial. The aim of this study was to develop an automatic and reliable method to determine the symmetry plane of the maxillofacial region. We compared the proposed method of determining the symmetry plane by assessing landmark-based and surface-based methods by way of quantitative symmetry assessments. Statistical analysis was applied to evaluate whether significant difference existed among these three kinds of symmetry planes. Twenty cases who had a diagnosis of severe facial asymmetry were evaluated retrospectively. The results showed that searching for the symmetry plane using a voxel-based method, named the optimal symmetry plane (OSP), achieved the most representative symmetry according to the outcomes of the trials. The OSP was significantly more symmetrical than the other two planes, as determined by other methods. The paired-voxel computation method proposed in this research is a robust and reliable method for identifying the unique symmetry plane for patients with severe facial asymmetry. Symmetry is of crucial significance for all kinds of vertebrates, including its clinical implications for surgical planning in orthognathic surgery.
- 26 September 2022
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 11 (19) , 5689
Open AccessAn Automatic Voxel-Based Method for Optimal Symmetry Plane Generation for the Maxillofacial Region in Severe Asymmetry Cases
Symmetry is representative of aesthetics and health in all kinds of vertebrates, especially the human face. Therefore, to automatically locate the appropriate symmetry plane is crucial. The aim of this study was to develop an automatic and reliable method to determine the symmetry plane of the maxillofacial region. We compared the proposed method of determining the symmetry plane by assessing landmark-based and surface-based methods by way of quantitative symmetry assessments. Statistical analysis was applied to evaluate whether significant difference existed among these three kinds of symmetry planes. Twenty cases who had a diagnosis of severe facial asymmetry were evaluated retrospectively. The results showed that searching for the symmetry plane using a voxel-based method, named the optimal symmetry plane (OSP), achieved the most representative symmetry according to the outcomes of the trials. The OSP was significantly more symmetrical than the other two planes, as determined by other methods. The paired-voxel computation method proposed in this research is a robust and reliable method for identifying the unique symmetry plane for patients with severe facial asymmetry. Symmetry is of crucial significance for all kinds of vertebrates, including its clinical implications for surgical planning in orthognathic surgery.