Fahimeh Abrinaei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fahimeh Abrinaei has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Salimeh Kimiagar
Islamic Azad University
5 shared publications Marzieh Shirazi
Islamic Azad University
3 shared publicationsSalimeh Kimiagar
3 shared publications- Marjan Rajabi
Department of Advanced Materials and Renewable Energy, Iranian Research Organization for Science and Technology (IROST), Tehran, Iran
2 shared publications - Mojtaba Moghaddasi
School of Optics and Photonics Beijing Institute of Technology Beijing China
2 shared publications - Ahad Amiri
Faculty of Physics, Yazd University, P.O. Box 8915818411, Yazd, Iran
1 shared publication
Latest Publications
- 19 March 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
Solvent-dependent nonlinear optical capabilities of CTAB-modified CdTe quantum dots probed by Z-scan technique
The study of quantum dots has opened up a plethora of possibilities for advanced applications in various fields. One crucial aspect of understanding these nanomaterials is exploring their nonlinear optical properties, which can be influenced by a range of factors, including the solvent environment in which they are dispersed during nonlinear optical tests. This paper delves into the effects of different solvents, namely ethanol, benzene, toluene, and chloroform, on the nonlinear optical capabilities of CTAB@CdTe quantum dots probed by the Z-scan technique when exposed to a continuous-wave Nd:YAG laser emitting at 532[ ]nm. High-quality water soluble TGA-capped CdTe quantum dots were successfully synthesized and subsequently modified for transfer in an organic solvent through a ligand exchange process using CTAB. The products were characterized using high-resolution transmission electron microscopy, UV–Vis spectroscopy, photoluminescence measurements, and Fourier transform infrared spectroscopy. The analysis revealed an average quantum dot size of approximately 3 nm. Furthermore, following the ligand exchange, the quantum dots exhibited excellent dispersion in the organic solvent, demonstrating the effectiveness of the modification process.
- 19 March 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
Solvent-dependent nonlinear optical capabilities of CTAB-modified CdTe quantum dots probed by Z-scan technique
The study of quantum dots has opened up a plethora of possibilities for advanced applications in various fields. One crucial aspect of understanding these nanomaterials is exploring their nonlinear optical properties, which can be influenced by a range of factors, including the solvent environment in which they are dispersed during nonlinear optical tests. This paper delves into the effects of different solvents, namely ethanol, benzene, toluene, and chloroform, on the nonlinear optical capabilities of CTAB@CdTe quantum dots probed by the Z-scan technique when exposed to a continuous-wave Nd:YAG laser emitting at 532[ ]nm. High-quality water soluble TGA-capped CdTe quantum dots were successfully synthesized and subsequently modified for transfer in an organic solvent through a ligand exchange process using CTAB. The products were characterized using high-resolution transmission electron microscopy, UV–Vis spectroscopy, photoluminescence measurements, and Fourier transform infrared spectroscopy. The analysis revealed an average quantum dot size of approximately 3 nm. Furthermore, following the ligand exchange, the quantum dots exhibited excellent dispersion in the organic solvent, demonstrating the effectiveness of the modification process.
- 11 March 2025
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 35 (03)
Structural and optical investigation of BaTiO 3 nanostructures produced from TiO 2 nanorod arrays using hydrothermal method
A well-aligned single-crystalline barium titanate (BaTiO 3 ) nanostructured layer was prepared by the growth and conversion of vertically aligned TiO 2 nanorods. This was achieved through a two-step hydrothermal method on fluorine-doped tin oxide (FTO)-coated glass substrates via the dissolution-nucleation-recrystallization mechanism. The morphology, crystal structure and optical properties were investigated using field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), Raman spectroscopy, photoluminescence (PL) and Z-scan techniques. The X-ray and selected area diffraction patterns (SAED) confirmed the formation of the aligned single-crystalline tetragonal BaTiO 3 layer. The room temperature Raman spectrum showed the tetragonal TiO 2 -related vibrational modes in BaTiO 3 . The PL spectra indicated the coalescence of band edge emissions of BaTiO 3 and TiO 2 in the blue and visible regions of the investigated spectra. The Z-scan experiments performed using the CW Nd:YAG laser revealed a positive nonlinear refractive index on the order of 10[ ] cm 2 W[ ], indicating the self-focusing type of cation in the BaTiO 3 sample. The nonlinear absorption coefficient of the BaTiO 3 nanostructures in the order of 10[ ] cm W[ ] was also calculated. As expected, the BaTiO 3 nanostructure synthesized in this study is a good candidate for use in nonlinear optics.
- 11 March 2025
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 35 (03)
Structural and optical investigation of BaTiO 3 nanostructures produced from TiO 2 nanorod arrays using hydrothermal method
A well-aligned single-crystalline barium titanate (BaTiO 3 ) nanostructured layer was prepared by the growth and conversion of vertically aligned TiO 2 nanorods. This was achieved through a two-step hydrothermal method on fluorine-doped tin oxide (FTO)-coated glass substrates via the dissolution-nucleation-recrystallization mechanism. The morphology, crystal structure and optical properties were investigated using field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), Raman spectroscopy, photoluminescence (PL) and Z-scan techniques. The X-ray and selected area diffraction patterns (SAED) confirmed the formation of the aligned single-crystalline tetragonal BaTiO 3 layer. The room temperature Raman spectrum showed the tetragonal TiO 2 -related vibrational modes in BaTiO 3 . The PL spectra indicated the coalescence of band edge emissions of BaTiO 3 and TiO 2 in the blue and visible regions of the investigated spectra. The Z-scan experiments performed using the CW Nd:YAG laser revealed a positive nonlinear refractive index on the order of 10[ ] cm 2 W[ ], indicating the self-focusing type of cation in the BaTiO 3 sample. The nonlinear absorption coefficient of the BaTiO 3 nanostructures in the order of 10[ ] cm W[ ] was also calculated. As expected, the BaTiO 3 nanostructure synthesized in this study is a good candidate for use in nonlinear optics.
- Open Access
- 1 March 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (3)
Magnetic chitosan/reduced graphene oxide nanocomposites: Hydrothermal synthesis, structural analysis, and application in anthracene removal
Anthracene belongs to the polycyclic aromatic hydrocarbon, which consists of benzene rings, unusually highly stable due to more π-electrons and localized π-bond in entire rings. In this paper, three magnetic chitosan (MCS)–reduced graphene oxide nanocomposites are successfully synthesized using the hydrothermal method. They are applied for anthracene removal from aqueous solutions as a low-cost, easy-to-synthesis, and environmentally friendly material. The synthesized samples are characterized by x-ray diffraction, scanning electron microscopy, energy-dispersive x-ray spectroscopy, ultraviolet–visible spectrophotometry, a vibrating sample-magnetometer, and Fourier transform infrared spectroscopy. Fast removal of anthracene is achieved within 60 min. The removal efficiency is ∼72%, 89%, and 86% for MCS, magnetic chitosan and reduced graphene oxide 40 (MCS–RGO40), and magnetic chitosan and reduced graphene oxide 60 (MCS–RGO60), respectively. The MCS–RGO60 nanocomposite exhibits fast adsorption of anthracene with a significant adsorption capacity (qmax = 1006.9 mg g−1) at 60 min. Fast adsorption processes often lead to a reduction in operational costs and energy consumption, as the process can be completed more quickly, making it more suitable for applications where rapid treatment is essential. The isotherm study shows the samples follow both Langmuir and Freundlich absorption models. The fit of both models allows for a more multipurpose interpretation of the adsorption process, making it easier to apply the findings across different systems or conditions, which is critical in a complex environment. This is particularly useful when applying it to different pollutants. The results show successful removal of the anthracene. The nanocomposite is effectively separated using an external magnet. This nanocomposite is a great alternative to remove anthracene from water.
- 1 March 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (3)
Open AccessMagnetic chitosan/reduced graphene oxide nanocomposites: Hydrothermal synthesis, structural analysis, and application in anthracene removal
Anthracene belongs to the polycyclic aromatic hydrocarbon, which consists of benzene rings, unusually highly stable due to more π-electrons and localized π-bond in entire rings. In this paper, three magnetic chitosan (MCS)–reduced graphene oxide nanocomposites are successfully synthesized using the hydrothermal method. They are applied for anthracene removal from aqueous solutions as a low-cost, easy-to-synthesis, and environmentally friendly material. The synthesized samples are characterized by x-ray diffraction, scanning electron microscopy, energy-dispersive x-ray spectroscopy, ultraviolet–visible spectrophotometry, a vibrating sample-magnetometer, and Fourier transform infrared spectroscopy. Fast removal of anthracene is achieved within 60 min. The removal efficiency is ∼72%, 89%, and 86% for MCS, magnetic chitosan and reduced graphene oxide 40 (MCS–RGO40), and magnetic chitosan and reduced graphene oxide 60 (MCS–RGO60), respectively. The MCS–RGO60 nanocomposite exhibits fast adsorption of anthracene with a significant adsorption capacity (qmax = 1006.9 mg g−1) at 60 min. Fast adsorption processes often lead to a reduction in operational costs and energy consumption, as the process can be completed more quickly, making it more suitable for applications where rapid treatment is essential. The isotherm study shows the samples follow both Langmuir and Freundlich absorption models. The fit of both models allows for a more multipurpose interpretation of the adsorption process, making it easier to apply the findings across different systems or conditions, which is critical in a complex environment. This is particularly useful when applying it to different pollutants. The results show successful removal of the anthracene. The nanocomposite is effectively separated using an external magnet. This nanocomposite is a great alternative to remove anthracene from water.
- 7 December 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 34 (08)
Investigating nonlinear optical properties of pulsed Nd:YAG laser-excited ZnO/Mn/SiO2 nanocomposites at 532nm
A hydrothermal synthesis approach was employed to fabricate ZnO and ZnO/Mn nanoparticles. Subsequently, the Stöber method was utilized to prepare ZnO/SiO2 and ZnO/Mn/SiO2 nanocomposites using the hydrothermally synthesized ZnO and ZnO/Mn nanoparticles. The successful synthesis of bare ZnO and ZnO-based nanocomposites was confirmed through FTIR spectroscopy and X-ray diffraction analysis. Linear optical characterization led to the calculation of band gap energy amounts utilizing Tauc plot approach. The impact of Mn and SiO2 additives on the nonlinear optical parameters of the ZnO/Mn/SiO2 nanocomposites was evaluated through a [ ]-scan setup under pulsed Nd:YAG laser operated at 532[ ]nm wavelength. Experimental [ ]-scan effects revealed that both bare ZnO and ZnO-based nanocomposites exhibited negative nonlinearity, for which the values could be controlled by the incorporation of additives to achieve enhanced third-order nonlinear susceptibility values in the order of [ ][ ]esu. Outcomes demonstrated that while adding of Mn to ZnO host increased the nonlinear optical parameters, the inclusion of SiO2 led to a slight decrease. However, the simultaneous presence of ZnO, Mn, and SiO2 resulted in the highest nonlinear optical response. These findings suggest that ZnO/Mn/SiO2 nanocomposites exhibit a robust nonlinear optical behavior, offering promising prospects as nonlinear media.
- 7 December 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 34 (08)
Investigating nonlinear optical properties of pulsed Nd:YAG laser-excited ZnO/Mn/SiO2 nanocomposites at 532nm
A hydrothermal synthesis approach was employed to fabricate ZnO and ZnO/Mn nanoparticles. Subsequently, the Stöber method was utilized to prepare ZnO/SiO2 and ZnO/Mn/SiO2 nanocomposites using the hydrothermally synthesized ZnO and ZnO/Mn nanoparticles. The successful synthesis of bare ZnO and ZnO-based nanocomposites was confirmed through FTIR spectroscopy and X-ray diffraction analysis. Linear optical characterization led to the calculation of band gap energy amounts utilizing Tauc plot approach. The impact of Mn and SiO2 additives on the nonlinear optical parameters of the ZnO/Mn/SiO2 nanocomposites was evaluated through a [ ]-scan setup under pulsed Nd:YAG laser operated at 532[ ]nm wavelength. Experimental [ ]-scan effects revealed that both bare ZnO and ZnO-based nanocomposites exhibited negative nonlinearity, for which the values could be controlled by the incorporation of additives to achieve enhanced third-order nonlinear susceptibility values in the order of [ ][ ]esu. Outcomes demonstrated that while adding of Mn to ZnO host increased the nonlinear optical parameters, the inclusion of SiO2 led to a slight decrease. However, the simultaneous presence of ZnO, Mn, and SiO2 resulted in the highest nonlinear optical response. These findings suggest that ZnO/Mn/SiO2 nanocomposites exhibit a robust nonlinear optical behavior, offering promising prospects as nonlinear media.
- 1 December 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 40 (12) , 2298-2306
Highly robust performance of a compact, wide-angle, nano-optic capsule endoscopy camera
The performance of capsule endoscopy, which plays an important role in noninvasive medical diagnostics, has been limited by aberrations and large optical sizes caused by several traditional lenses. We propose a capsule endoscopy camera based on a metalens that distinguishes it from existing technologies in three aspects. First, the camera achieved a high FOV of 160°, enabling a comprehensive examination of internal organs. Second, we achieved a compact design with an optical diameter of 1.6 mm and a length of 1.4 mm to enhance patient comfort. The attainment of exceptional image quality with an MTF of more than 45% at 300 lp/mm is the third advantage of this camera. The theoretical performance of this innovative approach shows great potential to improve diagnostic capabilities.
- 1 December 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 40 (12) , 2298-2306
Highly robust performance of a compact, wide-angle, nano-optic capsule endoscopy camera
The performance of capsule endoscopy, which plays an important role in noninvasive medical diagnostics, has been limited by aberrations and large optical sizes caused by several traditional lenses. We propose a capsule endoscopy camera based on a metalens that distinguishes it from existing technologies in three aspects. First, the camera achieved a high FOV of 160°, enabling a comprehensive examination of internal organs. Second, we achieved a compact design with an optical diameter of 1.6 mm and a length of 1.4 mm to enhance patient comfort. The attainment of exceptional image quality with an MTF of more than 45% at 300 lp/mm is the third advantage of this camera. The theoretical performance of this innovative approach shows great potential to improve diagnostic capabilities.
- 15 June 2020
- Published by Faculty of Engineering, University of Kragujevac in Tribology in Industry
- Vol. 42 (2) , 225-235
Effect of Laser Energy on the Tribology Properties of MoS2 Flakes
- 15 June 2020
- Published by Faculty of Engineering, University of Kragujevac in Tribology in Industry
- Vol. 42 (2) , 225-235
Effect of Laser Energy on the Tribology Properties of MoS2 Flakes
- Open Access
Preparation of Few-Layered Wide Bandgap MoS2 with Nanometer Lateral Dimensions by Applying Laser Irradiation
In this study, we report a new method for the quick, green, and one-step preparation of few-layered molybdenum disulfide (MoS2) nanosheets with wide bandgap. MoS2 nanosheets with small lateral dimension and uniform size distribution were synthesized for various applications. MoS2 powder was synthesized using the hydrothermal method; then, thinned by applying laser irradiation with different energies from 40 to 80 mJ. Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV-Vis absorption spectra, and photoluminescence (PL) spectra were applied for the characterization of the MoS2 nanosheets in terms of morphology, crystal structures, and optical properties. The widest calculated bandgap 4.7 eV was for the sample under 80 mJ laser energy. The results confirmed the successful preparation of highly pure, uniform, and few-layered MoS2 nanosheets. Furthermore, it was possible to enhance the production rate of MoS2 nanosheets (including nanosheets and nanoparticles) through laser irradiation. Thus, the present paper introduces a simple and green alternative approach for preparing few-layered MoS2 nanosheets of transition metal dichalcogenides or other layered materials.
Open AccessPreparation of Few-Layered Wide Bandgap MoS2 with Nanometer Lateral Dimensions by Applying Laser Irradiation
In this study, we report a new method for the quick, green, and one-step preparation of few-layered molybdenum disulfide (MoS2) nanosheets with wide bandgap. MoS2 nanosheets with small lateral dimension and uniform size distribution were synthesized for various applications. MoS2 powder was synthesized using the hydrothermal method; then, thinned by applying laser irradiation with different energies from 40 to 80 mJ. Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV-Vis absorption spectra, and photoluminescence (PL) spectra were applied for the characterization of the MoS2 nanosheets in terms of morphology, crystal structures, and optical properties. The widest calculated bandgap 4.7 eV was for the sample under 80 mJ laser energy. The results confirmed the successful preparation of highly pure, uniform, and few-layered MoS2 nanosheets. Furthermore, it was possible to enhance the production rate of MoS2 nanosheets (including nanosheets and nanoparticles) through laser irradiation. Thus, the present paper introduces a simple and green alternative approach for preparing few-layered MoS2 nanosheets of transition metal dichalcogenides or other layered materials.
- 1 October 2019
- Published by Elsevier in Optical Materials
- Vol. 96
Hydrothermal synthesis of hematite-GO nanocomposites at different GO contents and potential application in nonlinear optics
- 1 October 2019
- Published by Elsevier in Optical Materials
- Vol. 96
Hydrothermal synthesis of hematite-GO nanocomposites at different GO contents and potential application in nonlinear optics
- 4 April 2019
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 30 (9) , 8619-8628
Al dopant-dependent third-order nonlinear optical parameters in ZnO thin films under CW Nd: YAG laser irradiation
- 4 April 2019
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 30 (9) , 8619-8628
Al dopant-dependent third-order nonlinear optical parameters in ZnO thin films under CW Nd: YAG laser irradiation