Jin-Rae Cho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jin-Rae Cho has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Hyeong Jin Kim
University College London
9 shared publications Hong-Woo Lee
Technical Research Laboratories, POSCO, Jeonnam, Korea
3 shared publicationsWeui-Bong Jeong
Pusan National University
3 shared publicationsHan-Wool Lee
Pusan National University
2 shared publications- Young Ju Ahn
Department of Mechanical and Design Engineering, Hongik University, Sejong-si, Republic of Korea
2 shared publications B. K. Jung
Agency for Defense Development, Changwon City, Korea
1 shared publication
Latest Publications
- Open Access
- 31 December 2025
- Published by Computational Structural Engineering Institute of Korea in Journal of the Computational Structural Engineering Institute of Korea
- Vol. 38 (6) , 355-362
Numerical Buckling Analysis of Cracked Graphene-Reinforced Cylindrical Structures using a Phase-Field Crack Formulation
This study presents a numerical investigation of the buckling load of a cracked cylindrical panel reinforced with graphene platelets (GPLs). An effective phase-field crack model was incorporated into the framework of the 2-D natural element method (NEM) to accurately evaluate the buckling loads of graphene-reinforced panels. Graphene platelets were introduced into a cracked cylindrical panel according to a prescribed functional distribution pattern throughout the thickness. Conventional crack node separation methods for representing cracks are not only difficult but also prone to numerical inaccuracy and instability. To overcome this limitation, the proposed phase-field model represents crack initiation using a phase-field value without grid manipulation. The numerical stability of the developed crack model was verified through a convergence test with respect to the grid density and comparison with a reference solution. A detailed parametric study was then conducted to examine the influence of key parameters on the buckling load characteristics.
- 31 December 2025
- Published by Computational Structural Engineering Institute of Korea in Journal of the Computational Structural Engineering Institute of Korea
- Vol. 38 (6) , 355-362
Open AccessNumerical Buckling Analysis of Cracked Graphene-Reinforced Cylindrical Structures using a Phase-Field Crack Formulation
This study presents a numerical investigation of the buckling load of a cracked cylindrical panel reinforced with graphene platelets (GPLs). An effective phase-field crack model was incorporated into the framework of the 2-D natural element method (NEM) to accurately evaluate the buckling loads of graphene-reinforced panels. Graphene platelets were introduced into a cracked cylindrical panel according to a prescribed functional distribution pattern throughout the thickness. Conventional crack node separation methods for representing cracks are not only difficult but also prone to numerical inaccuracy and instability. To overcome this limitation, the proposed phase-field model represents crack initiation using a phase-field value without grid manipulation. The numerical stability of the developed crack model was verified through a convergence test with respect to the grid density and comparison with a reference solution. A detailed parametric study was then conducted to examine the influence of key parameters on the buckling load characteristics.
- Open Access
- 11 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 1866
Numerical Analysis of Fatigue Life of Wind Turbine Blades Reinforced with Graphene Platelets
The rapid growth of wind energy has necessitated the development of advanced materials to address the increasing structural demands of wind turbine blades. Graphene platelets (GPLs) have garnered attention as a promising reinforcement material due to their outstanding mechanical properties, such as high strength and low density. This study investigates the fatigue life of wind turbine blades reinforced with GPLs, benchmarking their performance against conventional fiberglass blades. A finite element model of a 5 MW wind turbine blade was developed to evaluate stresses within the blade structure. The traditional fiberglass blade was modeled based on the SNL 61.5 m design by Sandia National Laboratories, while the GPL-reinforced composite (GPLRC) blade was designed by substituting fiberglass with GPLRCs. Material properties of the GPLRCs were determined using the rule of mixtures and the Halpin–Tsai micromechanics model. Wind speed data were randomly sampled following the probability distribution observed at European wind farms, and corresponding aerodynamic loads were computed using blade element momentum theory. Finite element analyses were performed to derive stress time histories, and fatigue life was predicted using the S-N curve approach, incorporating the Goodman diagram and the Palmgren–Miner rule. The results reveal that while GPLRC-reinforced blades exhibit some limitations in fatigue performance compared to traditional fiberglass blades, potential solutions for improving their durability are proposed, highlighting avenues for further research and optimization in the application of GPLRCs to wind turbine blades.
- 11 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 1866
Open AccessNumerical Analysis of Fatigue Life of Wind Turbine Blades Reinforced with Graphene Platelets
The rapid growth of wind energy has necessitated the development of advanced materials to address the increasing structural demands of wind turbine blades. Graphene platelets (GPLs) have garnered attention as a promising reinforcement material due to their outstanding mechanical properties, such as high strength and low density. This study investigates the fatigue life of wind turbine blades reinforced with GPLs, benchmarking their performance against conventional fiberglass blades. A finite element model of a 5 MW wind turbine blade was developed to evaluate stresses within the blade structure. The traditional fiberglass blade was modeled based on the SNL 61.5 m design by Sandia National Laboratories, while the GPL-reinforced composite (GPLRC) blade was designed by substituting fiberglass with GPLRCs. Material properties of the GPLRCs were determined using the rule of mixtures and the Halpin–Tsai micromechanics model. Wind speed data were randomly sampled following the probability distribution observed at European wind farms, and corresponding aerodynamic loads were computed using blade element momentum theory. Finite element analyses were performed to derive stress time histories, and fatigue life was predicted using the S-N curve approach, incorporating the Goodman diagram and the Palmgren–Miner rule. The results reveal that while GPLRC-reinforced blades exhibit some limitations in fatigue performance compared to traditional fiberglass blades, potential solutions for improving their durability are proposed, highlighting avenues for further research and optimization in the application of GPLRCs to wind turbine blades.
- Open Access
Buckling Analysis of Functionally Graded GPL-Reinforced Composite Plates Under Combined Thermal and Mechanical Loads
The buckling-like mechanical behavior of functionally graded graphene platelet-reinforced composite (FG-GPLRC) structures is increasingly attracting research attention. However, buckling behavior has previously been studied separately as thermal buckling and mechanical buckling. In this context, this study investigates the buckling behavior of FG-GPLRC plates under combined thermal and mechanical loads. The coupled buckling problem is formulated according to the minimum potential energy theorem using first-order shear deformation theory (FSDT). In addition, the problem is approximated by the 2-D natural element method (NEM), and the resulting coupled eigen matrix equations are derived to compute the critical buckling temperature rise (CBTR) and the mechanical buckling load. The developed numerical method can solve thermal, mechanical, and coupled thermo-mechanical buckling problems, and its reliability is examined through convergence and benchmark tests. Using the developed numerical method, the buckling behavior of FG-GPLRC plates under thermal and mechanical buckling loads is examined in depth with respect to the key parameters. In addition, a comparison with functionally graded CNT-reinforced composite (FG-CNTRC) plates is also presented.
Open AccessBuckling Analysis of Functionally Graded GPL-Reinforced Composite Plates Under Combined Thermal and Mechanical Loads
The buckling-like mechanical behavior of functionally graded graphene platelet-reinforced composite (FG-GPLRC) structures is increasingly attracting research attention. However, buckling behavior has previously been studied separately as thermal buckling and mechanical buckling. In this context, this study investigates the buckling behavior of FG-GPLRC plates under combined thermal and mechanical loads. The coupled buckling problem is formulated according to the minimum potential energy theorem using first-order shear deformation theory (FSDT). In addition, the problem is approximated by the 2-D natural element method (NEM), and the resulting coupled eigen matrix equations are derived to compute the critical buckling temperature rise (CBTR) and the mechanical buckling load. The developed numerical method can solve thermal, mechanical, and coupled thermo-mechanical buckling problems, and its reliability is examined through convergence and benchmark tests. Using the developed numerical method, the buckling behavior of FG-GPLRC plates under thermal and mechanical buckling loads is examined in depth with respect to the key parameters. In addition, a comparison with functionally graded CNT-reinforced composite (FG-CNTRC) plates is also presented.
- Open Access
- 16 December 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (24) , 2020
Numerical Study on the Static Bending Response of Cracked Wind Turbine Blades Reinforced with Graphene Platelets
With the growing demand for wind energy, the development of advanced materials for wind turbine support structures and blades has garnered significant attention in both industry and academia. In previous research, the authors investigated the incorporation of graphene platelets (GPLs) into wind turbine blades, focusing on the structural performance and cost-effectiveness relative to conventional fiberglass composites. These studies successfully demonstrated the potential advantages of GPL reinforcement in improving blade performance and reducing the blade’s weight and costs. Building upon prior work, the present study conducts a detailed investigation into the static bending behavior of GPL-reinforced wind turbine blades, specifically examining the impact of crack location and length. A finite element model of the SNL 61.5 m wind turbine blade was rigorously developed and validated through comparison with the existing literature to ensure its accuracy. Comprehensive parametric analyses were performed to assess deflection under various crack lengths and positions, considering both flapwise and edgewise bending deformations. The findings indicate that GPL-reinforced blades exhibit reduced sensitivity to crack propagation compared to traditional fiberglass blades. Furthermore, the paper presents a thorough parametric analysis of the effects of crack location and length on blade performance.
- 16 December 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (24) , 2020
Open AccessNumerical Study on the Static Bending Response of Cracked Wind Turbine Blades Reinforced with Graphene Platelets
With the growing demand for wind energy, the development of advanced materials for wind turbine support structures and blades has garnered significant attention in both industry and academia. In previous research, the authors investigated the incorporation of graphene platelets (GPLs) into wind turbine blades, focusing on the structural performance and cost-effectiveness relative to conventional fiberglass composites. These studies successfully demonstrated the potential advantages of GPL reinforcement in improving blade performance and reducing the blade’s weight and costs. Building upon prior work, the present study conducts a detailed investigation into the static bending behavior of GPL-reinforced wind turbine blades, specifically examining the impact of crack location and length. A finite element model of the SNL 61.5 m wind turbine blade was rigorously developed and validated through comparison with the existing literature to ensure its accuracy. Comprehensive parametric analyses were performed to assess deflection under various crack lengths and positions, considering both flapwise and edgewise bending deformations. The findings indicate that GPL-reinforced blades exhibit reduced sensitivity to crack propagation compared to traditional fiberglass blades. Furthermore, the paper presents a thorough parametric analysis of the effects of crack location and length on blade performance.
- Open Access
- 29 September 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (19) , 8794
Thermal Buckling and Postbuckling Analysis of Cracked FG-GPL RC Plates Using a Phase-Field Crack Model
A phase-field crack model is developed for numerical analysis of thermal buckling and postbuckling behavior of a functionally graded (FG) graphene platelet-reinforced composite (FG-GPLRC) plate with a central crack. The inclined central crack is represented according to a stable, effective phase-field formulation (PFF) by introducing a virtual crack rotation. The problem is formulated using first-order shear deformation theory (SDT) incorporated with von Kármán geometric nonlinearity. And it is approximated by combining regular Laplace interpolation functions and crack-tip singular functions in the framework of the 2D extended natural element method (XNEM). Troublesome shear locking is suppressed by applying the concept of the MITC (mixed-interpolated tensorial components)3+ shell element to the present numerical method. The results demonstrate the effectiveness of this method in accurately predicting the critical buckling temperature rise (CBTR) and the thermal postbuckling path. In addition, the parametric results reveal that the CBTR and postbuckling path of the FG-GPLRC plate are distinct from those of the FG carbon nanotube-reinforced composite (FG-CNTRC) plate and remarkably affected by the parameters associated with the crack and graphene platelet (GPL).
- 29 September 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (19) , 8794
Open AccessThermal Buckling and Postbuckling Analysis of Cracked FG-GPL RC Plates Using a Phase-Field Crack Model
A phase-field crack model is developed for numerical analysis of thermal buckling and postbuckling behavior of a functionally graded (FG) graphene platelet-reinforced composite (FG-GPLRC) plate with a central crack. The inclined central crack is represented according to a stable, effective phase-field formulation (PFF) by introducing a virtual crack rotation. The problem is formulated using first-order shear deformation theory (SDT) incorporated with von Kármán geometric nonlinearity. And it is approximated by combining regular Laplace interpolation functions and crack-tip singular functions in the framework of the 2D extended natural element method (XNEM). Troublesome shear locking is suppressed by applying the concept of the MITC (mixed-interpolated tensorial components)3+ shell element to the present numerical method. The results demonstrate the effectiveness of this method in accurately predicting the critical buckling temperature rise (CBTR) and the thermal postbuckling path. In addition, the parametric results reveal that the CBTR and postbuckling path of the FG-GPLRC plate are distinct from those of the FG carbon nanotube-reinforced composite (FG-CNTRC) plate and remarkably affected by the parameters associated with the crack and graphene platelet (GPL).
- Open Access
In-Depth Study on the Application of a Graphene Platelet-reinforced Composite to Wind Turbine Blades
Graphene platelets (GPLs) are gaining popularity across various sectors for enhancing the strength and reducing the weight of structures, thanks to their outstanding mechanical characteristics and low manufacturing cost. Among many engineering structures, wind turbine blades are a prime candidate for the integration of such advanced nanofillers, offering potential improvements in the efficiency of energy generation and reductions in the construction costs of support structures. This study aims to explore the potential of GPLs for use in wind turbine blades by evaluating their impact on material costs as well as mechanical performance. A series of finite element analyses (FEAs) were conducted to examine the variations of mechanical performances—specifically, free vibration, bending, torsional deformation, and weight reductions relative to conventional fiberglass-based blades. Details of computational modeling techniques are presented in this paper. Based on the outcomes of these analyses, the mechanical performances of GPL-reinforced wind turbine blades are reviewed along with a cost–benefit analysis, exemplified through a 5MW-class wind turbine blade. The findings affirm the practicality and benefits of employing GPLs in the design and fabrication of wind turbine blades.
Open AccessIn-Depth Study on the Application of a Graphene Platelet-reinforced Composite to Wind Turbine Blades
Graphene platelets (GPLs) are gaining popularity across various sectors for enhancing the strength and reducing the weight of structures, thanks to their outstanding mechanical characteristics and low manufacturing cost. Among many engineering structures, wind turbine blades are a prime candidate for the integration of such advanced nanofillers, offering potential improvements in the efficiency of energy generation and reductions in the construction costs of support structures. This study aims to explore the potential of GPLs for use in wind turbine blades by evaluating their impact on material costs as well as mechanical performance. A series of finite element analyses (FEAs) were conducted to examine the variations of mechanical performances—specifically, free vibration, bending, torsional deformation, and weight reductions relative to conventional fiberglass-based blades. Details of computational modeling techniques are presented in this paper. Based on the outcomes of these analyses, the mechanical performances of GPL-reinforced wind turbine blades are reviewed along with a cost–benefit analysis, exemplified through a 5MW-class wind turbine blade. The findings affirm the practicality and benefits of employing GPLs in the design and fabrication of wind turbine blades.
- Open Access
Exploratory Study on the Application of Graphene Platelet-Reinforced Composite to Wind Turbine Blade
With the growth of the wind energy market and the increase in the size of wind turbines, the demand for advanced composite materials with high strength and low density for wind turbine blades has become imperative. Graphene platelets (GPLs) stand out as highly premising reinforcements due to their exceptional physical properties, resulting in their widespread adoption in the composite industry in recent years. The present study aims to analyze the applicability of a graphene-platelet-reinforced composite (GPLRC) to wind turbine blades in terms of structural performance. A finite element blade model is constructed by referring to the National Renewable Energy Laboratory (NREL) 5 MW wind turbine, and its reliability is verified through a convergence test. The performance of the wind turbine blade is quantitatively examined in terms of the deflection and stress, natural frequencies, and twist angle. The applicability of the GPL-reinforced wind blade is explored through a comparison with wind blades manufactured with glass fiber and carbon nanotubes (CNTs). The comparison indicates that the performance of a wind blade can be remarkably improved by reinforcing with GPLs instead of traditional fillers, and the weight of not only the wind blade itself but also the wind turbine system can be remarkably reduced. The present results can be useful in the development of next-generation high-strength lightweight wind turbine blades.
Open AccessExploratory Study on the Application of Graphene Platelet-Reinforced Composite to Wind Turbine Blade
With the growth of the wind energy market and the increase in the size of wind turbines, the demand for advanced composite materials with high strength and low density for wind turbine blades has become imperative. Graphene platelets (GPLs) stand out as highly premising reinforcements due to their exceptional physical properties, resulting in their widespread adoption in the composite industry in recent years. The present study aims to analyze the applicability of a graphene-platelet-reinforced composite (GPLRC) to wind turbine blades in terms of structural performance. A finite element blade model is constructed by referring to the National Renewable Energy Laboratory (NREL) 5 MW wind turbine, and its reliability is verified through a convergence test. The performance of the wind turbine blade is quantitatively examined in terms of the deflection and stress, natural frequencies, and twist angle. The applicability of the GPL-reinforced wind blade is explored through a comparison with wind blades manufactured with glass fiber and carbon nanotubes (CNTs). The comparison indicates that the performance of a wind blade can be remarkably improved by reinforcing with GPLs instead of traditional fillers, and the weight of not only the wind blade itself but also the wind turbine system can be remarkably reduced. The present results can be useful in the development of next-generation high-strength lightweight wind turbine blades.
- Open Access
Effects of Graphene Reinforcement on Static Bending, Free Vibration, and Torsion of Wind Turbine Blades
Renewable energy markets, particularly wind energy, have experienced remarkable growth, predominantly driven by the urgent need for decarbonization in the face of accelerating global warming. As the wind energy sector expands and turbines increase in size, there is a growing demand for advanced composite materials that offer both high strength and low density. Among these materials, graphene stands out for its excellent mechanical properties and low density. Incorporating graphene reinforcement into wind turbine blades has the potential to enhance generation efficiency and reduce the construction costs of foundation structures. As a pilot study of graphene reinforcement on wind turbine blades, this study aims to investigate the variations of mechanical characteristics and weights between traditional fiberglass-based blades and those reinforced with graphene platelets (GPLs). A finite element model of the SNL 61.5 m horizontal wind turbine blade is used and validated by comparing the analysis results with those presented in the existing literature. Case studies are conducted to explore the effects of graphene reinforcement on wind turbine blades in terms of mechanical characteristics, such as free vibration, bending, and torsional deformation. Furthermore, the masses and fabrication costs are compared among fiberglass, CNTRC, and GPLRC-based wind turbine blades. Finally, the results obtained from this study demonstrate the effectiveness of graphene reinforcement on wind turbine blades in terms of both their mechanical performance and weight reduction.
Open AccessEffects of Graphene Reinforcement on Static Bending, Free Vibration, and Torsion of Wind Turbine Blades
Renewable energy markets, particularly wind energy, have experienced remarkable growth, predominantly driven by the urgent need for decarbonization in the face of accelerating global warming. As the wind energy sector expands and turbines increase in size, there is a growing demand for advanced composite materials that offer both high strength and low density. Among these materials, graphene stands out for its excellent mechanical properties and low density. Incorporating graphene reinforcement into wind turbine blades has the potential to enhance generation efficiency and reduce the construction costs of foundation structures. As a pilot study of graphene reinforcement on wind turbine blades, this study aims to investigate the variations of mechanical characteristics and weights between traditional fiberglass-based blades and those reinforced with graphene platelets (GPLs). A finite element model of the SNL 61.5 m horizontal wind turbine blade is used and validated by comparing the analysis results with those presented in the existing literature. Case studies are conducted to explore the effects of graphene reinforcement on wind turbine blades in terms of mechanical characteristics, such as free vibration, bending, and torsional deformation. Furthermore, the masses and fabrication costs are compared among fiberglass, CNTRC, and GPLRC-based wind turbine blades. Finally, the results obtained from this study demonstrate the effectiveness of graphene reinforcement on wind turbine blades in terms of both their mechanical performance and weight reduction.
- 5 July 2024
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 38 (7) , 3533-3543
Numerical optimization of volume fraction distributions in FGM sandwich beams with FG-CNTRC facesheets
- 5 July 2024
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 38 (7) , 3533-3543
Numerical optimization of volume fraction distributions in FGM sandwich beams with FG-CNTRC facesheets