Hyeong Jin Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hyeong Jin Kim has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Jeom Kee Paik
University College London
13 shared publications - Jin-Rae Cho
Department of Naval Architecture and Ocean Engineering, Hongik University, Sejong, Korea
9 shared publications - Abdulaziz Sindi
Department of Mechanical Engineering University College London London UK
2 shared publications Dae Kyeom Park
The Korea Ship and Offshore Research Institute (Lloyd's Foundation Research Centre of Excellence), Pusan National University, Busan, Republic of Korea
2 shared publicationsSang Min Park
2 shared publicationsBrian Thomas
Thomas Naval Architecture
1 shared publication
Latest Publications
- Open Access
- 31 July 2026
- Published by Taylor & Francis in Ships and Offshore Structures
- p. 1-22
Collision safety design and engineering of a concrete-shielded SMR compartment in a 25,800 TEU SMR-powered containership
- 31 July 2026
- Published by Taylor & Francis in Ships and Offshore Structures
- p. 1-22
Open AccessCollision safety design and engineering of a concrete-shielded SMR compartment in a 25,800 TEU SMR-powered containership
- Open Access
- 28 February 2026
- Published by Elsevier in Ocean Engineering
- Vol. 353
Structural protection of ship-shaped offshore installations using hollow-section rubber fenders under high-energy side-by-side collisions
- 28 February 2026
- Published by Elsevier in Ocean Engineering
- Vol. 353
Open AccessStructural protection of ship-shaped offshore installations using hollow-section rubber fenders under high-energy side-by-side collisions
- Open Access
- 31 December 2025
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 21 (1) , 33-93
The digital reconstruction and resurrection of the RMS Titanic ’s sinking
- 31 December 2025
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 21 (1) , 33-93
Open AccessThe digital reconstruction and resurrection of the RMS Titanic ’s sinking
- Open Access
- 22 May 2025
- Published by Taylor & Francis in Ships and Offshore Structures
- p. 1-18
A digital twin model within the framework of a digital healthcare engineering system for aging containership hull structures
- 22 May 2025
- Published by Taylor & Francis in Ships and Offshore Structures
- p. 1-18
Open AccessA digital twin model within the framework of a digital healthcare engineering system for aging containership hull structures
- Open Access
- 18 March 2025
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 21 (10) , 2030-2039
A new method for determining the design values of wave-induced vertical bending moments acting on ship-shaped offshore installations in survival conditions
- 18 March 2025
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 21 (10) , 2030-2039
Open AccessA new method for determining the design values of wave-induced vertical bending moments acting on ship-shaped offshore installations in survival conditions
- Open Access
- 11 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 1866
Numerical Analysis of Fatigue Life of Wind Turbine Blades Reinforced with Graphene Platelets
The rapid growth of wind energy has necessitated the development of advanced materials to address the increasing structural demands of wind turbine blades. Graphene platelets (GPLs) have garnered attention as a promising reinforcement material due to their outstanding mechanical properties, such as high strength and low density. This study investigates the fatigue life of wind turbine blades reinforced with GPLs, benchmarking their performance against conventional fiberglass blades. A finite element model of a 5 MW wind turbine blade was developed to evaluate stresses within the blade structure. The traditional fiberglass blade was modeled based on the SNL 61.5 m design by Sandia National Laboratories, while the GPL-reinforced composite (GPLRC) blade was designed by substituting fiberglass with GPLRCs. Material properties of the GPLRCs were determined using the rule of mixtures and the Halpin–Tsai micromechanics model. Wind speed data were randomly sampled following the probability distribution observed at European wind farms, and corresponding aerodynamic loads were computed using blade element momentum theory. Finite element analyses were performed to derive stress time histories, and fatigue life was predicted using the S-N curve approach, incorporating the Goodman diagram and the Palmgren–Miner rule. The results reveal that while GPLRC-reinforced blades exhibit some limitations in fatigue performance compared to traditional fiberglass blades, potential solutions for improving their durability are proposed, highlighting avenues for further research and optimization in the application of GPLRCs to wind turbine blades.
- 11 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 1866
Open AccessNumerical Analysis of Fatigue Life of Wind Turbine Blades Reinforced with Graphene Platelets
The rapid growth of wind energy has necessitated the development of advanced materials to address the increasing structural demands of wind turbine blades. Graphene platelets (GPLs) have garnered attention as a promising reinforcement material due to their outstanding mechanical properties, such as high strength and low density. This study investigates the fatigue life of wind turbine blades reinforced with GPLs, benchmarking their performance against conventional fiberglass blades. A finite element model of a 5 MW wind turbine blade was developed to evaluate stresses within the blade structure. The traditional fiberglass blade was modeled based on the SNL 61.5 m design by Sandia National Laboratories, while the GPL-reinforced composite (GPLRC) blade was designed by substituting fiberglass with GPLRCs. Material properties of the GPLRCs were determined using the rule of mixtures and the Halpin–Tsai micromechanics model. Wind speed data were randomly sampled following the probability distribution observed at European wind farms, and corresponding aerodynamic loads were computed using blade element momentum theory. Finite element analyses were performed to derive stress time histories, and fatigue life was predicted using the S-N curve approach, incorporating the Goodman diagram and the Palmgren–Miner rule. The results reveal that while GPLRC-reinforced blades exhibit some limitations in fatigue performance compared to traditional fiberglass blades, potential solutions for improving their durability are proposed, highlighting avenues for further research and optimization in the application of GPLRCs to wind turbine blades.
- Open Access
- 16 December 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (24) , 2020
Numerical Study on the Static Bending Response of Cracked Wind Turbine Blades Reinforced with Graphene Platelets
With the growing demand for wind energy, the development of advanced materials for wind turbine support structures and blades has garnered significant attention in both industry and academia. In previous research, the authors investigated the incorporation of graphene platelets (GPLs) into wind turbine blades, focusing on the structural performance and cost-effectiveness relative to conventional fiberglass composites. These studies successfully demonstrated the potential advantages of GPL reinforcement in improving blade performance and reducing the blade’s weight and costs. Building upon prior work, the present study conducts a detailed investigation into the static bending behavior of GPL-reinforced wind turbine blades, specifically examining the impact of crack location and length. A finite element model of the SNL 61.5 m wind turbine blade was rigorously developed and validated through comparison with the existing literature to ensure its accuracy. Comprehensive parametric analyses were performed to assess deflection under various crack lengths and positions, considering both flapwise and edgewise bending deformations. The findings indicate that GPL-reinforced blades exhibit reduced sensitivity to crack propagation compared to traditional fiberglass blades. Furthermore, the paper presents a thorough parametric analysis of the effects of crack location and length on blade performance.
- 16 December 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (24) , 2020
Open AccessNumerical Study on the Static Bending Response of Cracked Wind Turbine Blades Reinforced with Graphene Platelets
With the growing demand for wind energy, the development of advanced materials for wind turbine support structures and blades has garnered significant attention in both industry and academia. In previous research, the authors investigated the incorporation of graphene platelets (GPLs) into wind turbine blades, focusing on the structural performance and cost-effectiveness relative to conventional fiberglass composites. These studies successfully demonstrated the potential advantages of GPL reinforcement in improving blade performance and reducing the blade’s weight and costs. Building upon prior work, the present study conducts a detailed investigation into the static bending behavior of GPL-reinforced wind turbine blades, specifically examining the impact of crack location and length. A finite element model of the SNL 61.5 m wind turbine blade was rigorously developed and validated through comparison with the existing literature to ensure its accuracy. Comprehensive parametric analyses were performed to assess deflection under various crack lengths and positions, considering both flapwise and edgewise bending deformations. The findings indicate that GPL-reinforced blades exhibit reduced sensitivity to crack propagation compared to traditional fiberglass blades. Furthermore, the paper presents a thorough parametric analysis of the effects of crack location and length on blade performance.
- 5 September 2024
- Published by Wiley in Materials and Corrosion
- Vol. 76 (6) , 790-801
Effect of Corrosion Wastage on the Limit States of Monopile‐Type Offshore Wind Turbines Under Combined Wind and Rotor Blade Rotation
In digital healthcare engineering (DHE) for aging monopile‐type offshore wind turbines, predictive health analysis is essential for robust future maintenance planning. This paper presents the development of a DHE module for the predictive health analysis of corroded monopile‐type offshore wind turbines, focusing on wind and rotor blade rotation effects. An empirical formula for predicting time‐variant corrosion wastage is derived from a statistical analysis of a decade‐long corrosion wastage database and applied to predict the corrosion depth of a 5 MW monopile‐type offshore wind turbine, serving as an illustrative example. Nonlinear finite element analyses using LS‐DYNA are performed on the corroded turbine tower under combined wind‐induced loads and rotor‐induced thrust forces. Two types of corrosion wastage, pitting, and uniform (general) corrosion, are considered. The health condition of the corroded tower is evaluated based on serviceability limit state and ultimate limit state criteria. The methodology developed in this paper will be integrated into the DHE system currently being developed by the authors for aging monopile‐type offshore wind turbines.
- 5 September 2024
- Published by Wiley in Materials and Corrosion
- Vol. 76 (6) , 790-801
Effect of Corrosion Wastage on the Limit States of Monopile‐Type Offshore Wind Turbines Under Combined Wind and Rotor Blade Rotation
In digital healthcare engineering (DHE) for aging monopile‐type offshore wind turbines, predictive health analysis is essential for robust future maintenance planning. This paper presents the development of a DHE module for the predictive health analysis of corroded monopile‐type offshore wind turbines, focusing on wind and rotor blade rotation effects. An empirical formula for predicting time‐variant corrosion wastage is derived from a statistical analysis of a decade‐long corrosion wastage database and applied to predict the corrosion depth of a 5 MW monopile‐type offshore wind turbine, serving as an illustrative example. Nonlinear finite element analyses using LS‐DYNA are performed on the corroded turbine tower under combined wind‐induced loads and rotor‐induced thrust forces. Two types of corrosion wastage, pitting, and uniform (general) corrosion, are considered. The health condition of the corroded tower is evaluated based on serviceability limit state and ultimate limit state criteria. The methodology developed in this paper will be integrated into the DHE system currently being developed by the authors for aging monopile‐type offshore wind turbines.
- Open Access
In-Depth Study on the Application of a Graphene Platelet-reinforced Composite to Wind Turbine Blades
Graphene platelets (GPLs) are gaining popularity across various sectors for enhancing the strength and reducing the weight of structures, thanks to their outstanding mechanical characteristics and low manufacturing cost. Among many engineering structures, wind turbine blades are a prime candidate for the integration of such advanced nanofillers, offering potential improvements in the efficiency of energy generation and reductions in the construction costs of support structures. This study aims to explore the potential of GPLs for use in wind turbine blades by evaluating their impact on material costs as well as mechanical performance. A series of finite element analyses (FEAs) were conducted to examine the variations of mechanical performances—specifically, free vibration, bending, torsional deformation, and weight reductions relative to conventional fiberglass-based blades. Details of computational modeling techniques are presented in this paper. Based on the outcomes of these analyses, the mechanical performances of GPL-reinforced wind turbine blades are reviewed along with a cost–benefit analysis, exemplified through a 5MW-class wind turbine blade. The findings affirm the practicality and benefits of employing GPLs in the design and fabrication of wind turbine blades.
Open AccessIn-Depth Study on the Application of a Graphene Platelet-reinforced Composite to Wind Turbine Blades
Graphene platelets (GPLs) are gaining popularity across various sectors for enhancing the strength and reducing the weight of structures, thanks to their outstanding mechanical characteristics and low manufacturing cost. Among many engineering structures, wind turbine blades are a prime candidate for the integration of such advanced nanofillers, offering potential improvements in the efficiency of energy generation and reductions in the construction costs of support structures. This study aims to explore the potential of GPLs for use in wind turbine blades by evaluating their impact on material costs as well as mechanical performance. A series of finite element analyses (FEAs) were conducted to examine the variations of mechanical performances—specifically, free vibration, bending, torsional deformation, and weight reductions relative to conventional fiberglass-based blades. Details of computational modeling techniques are presented in this paper. Based on the outcomes of these analyses, the mechanical performances of GPL-reinforced wind turbine blades are reviewed along with a cost–benefit analysis, exemplified through a 5MW-class wind turbine blade. The findings affirm the practicality and benefits of employing GPLs in the design and fabrication of wind turbine blades.