MBMaísa Azevedo Beluomini

Maísa Azevedo Beluomini

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Maísa Azevedo Beluomini has a total of 38 co-authors. Here are the top co-authors by number of shared publications:

  • Nelson Ramos Stradiotto

    Sao Paulo State University

    14 shared publications
  • José Luiz da Silva

    Laboratorio de Electroquímica, Electroanalítica y Materiales Aplicados, Laboratorios de Investigación y Desarrollo, Facultad de Ciencias e Ingeniería, Universidad Peruana Cayetano Heredia, San Martín de Porres, Lima 150135, Peru

    9 shared publications
  • Nelson Ramos Stradiotto

    Instituto de Química, Universidade Estadual Paulista (Unesp), Araraquara, Brazil

    3 shared publications
  • Acelino Cardoso de Sá

    Institute of Physics, São Carlos, USP − University of São Paulo, 400 Trabalhador São-Carlense Aveneu, São Carlos, SP 13566-590, Brazil

    2 shared publications
  • Graziela Cristina Sedenho

    São Carlos Institute of Chemistry, University of São Paulo, Av. Trabalhador São-carlense, 400, 13566-590, São Carlos, SP, Brazil

    2 shared publications
  • João Carlos de Souza

    Department of Analytical, Physical and Inorganic Chemistry, Institute of Chemistry, National Institute of Alternative Technologies for Detection, Toxicological Evaluation and Removal of Micropollutants and Radioactive Substances (INCT-DATREM), São Paulo State University (UNESP), Prof. Francisco Degni St. 55, Araraquara 14800-060, SP, Brazil

    2 shared publications

Latest Publications

  • Open Access

    MXene-polydopamine-cyanobacteria photobioelectrochemical biosensor for atrazine detection in environmental waters

    by Caio César Gonçalves Silva, Maiza de Lima Bueno, Max Fabricio Falone, Lucas Felipe de Lima, William Reis de Araujo, Maria Valnice Boldrin Zanoni, Maisa Azevedo Beluomini

  • Electrochemical detection of poly(3-hydroxybutyrate) production from Burkholderia glumae MA13 using a molecularly imprinted polymer-reduced graphene oxide modified electrode

    by Emanuela da Conceição, Edervaldo Buffon, Maísa Azevedo Beluomini, Max Fabrício Falone, Fernanda Batista de Andrade, Jonas Contiero, Nelson Ramos Stradiotto

    The development and application of an electrochemical sensor is reported for detection of poly(3-hydroxybutyrate) (P3HB) – a bioplastic derived from agro-industrial residues. To overcome the challenges of molecular imprinting of macromolecules such as P3HB, this study employed methanolysis reaction to break down the P3HB biopolymer chains into methyl 3-hydroxybutyrate (M3HB) monomers. Thereafter, M3HB were employed as the target molecules in the construction of molecularly imprinted sensors. The electrochemical device was then prepared by electropolymerizing a molecularly imprinted poly (indole-3-acetic acid) thin film on a glassy carbon electrode surface modified with reduced graphene oxide (GCE/rGO-MIP) in the presence of M3HB. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), scanning electron microscopy with field emission gun (SEM-FEG), Raman spectroscopy, attenuated total reflection Fourier-transform infrared (ATR-FTIR) and X-ray Photoelectron Spectroscopy (XPS) were employed to characterize the electrode surface. Under ideal conditions, the MIP sensor exhibited a wide linear working range of 0.1 – 10 nM and a detection limit of 0.3 pM (n = 3). The sensor showed good repeatability, selectivity, and stability over time. For the sensor application, the bioproduction of P3HB was carried out in a bioreactor containing the Burkholderia glumae MA13 strain and sugarcane byproducts as a supplementary carbon source. The analyses were validated through recovery assays, yielding recovery values between 102 and 104%. These results indicate that this MIP sensor can present advantages in the monitoring of P3HB during the bioconversion process. Graphical Abstract


  • Open Access

    Triphasic Oxygen Storage in Wet Nanoparticulate Polymer of Intrinsic Microporosity (PIM-1) on Platinum: An Electrochemical Investigation

    by Maisa Azevedo Beluomini, Nelson Ramos Stradiotto, Maria Valnice Boldrin Zanoni, Mariolino Carta, Neil B. McKeown, Philip J. Fletcher, Sunanda Sain, Zhongkai Li, Frank Marken

    The triphasic interaction of gases with electrode surfaces immersed in aqueous electrolyte is crucial in electrochemical technologies (fuel cells, batteries, sensors). Some microporous materials modify this interaction locally via triphasic storage capacity for gases in aqueous environments linked to changes in apparent oxygen concentration and diffusivity (as well as activity and reactivity). Here, a nanoparticulate polymer of intrinsic microporosity (PIM-1) in aqueous electrolyte is shown to store oxygen gas and thereby enhance electrochemical signals for oxygen reduction in aqueous media. Oxygen reduction current transient data at platinum disk electrodes suggest that the reactivity of ambient oxygen in aqueous electrolyte (typically Doxygen = 2.8 × 10-9 m2 s-1; coxygen = 0.3 mM) is substantially modified (to approximately Dapp,oxygen = 1.6 (±0.3) × 10-12 m2 s-1; capp,oxygen = 50 (±5) mM) with important implications for triphasic electrode processes. The considerable apparent concentration of oxygen even for ambient oxygen levels is important. Potential applications in oxygen sensing, oxygen storage, oxygen catalysis, or applications associated with other types of gases are discussed.


  • Voltammetric determination of sulfur in biodiesel microemulsion using a silver solid amalgam electrode

    by Marco Antonio Modenes Junior, Maísa Azevedo Beluomini, Nelson Ramos Stradiotto

    Monitoring sulfur in biodiesel is of fundamental importance because even in low concentrations, it can harm the operation of the engine parts and increase the emission of toxic gases and particulate material. Hence, a simple, quick and sensitive adsorptive stripping voltammetry (AdSV) method based on a silver solid amalgam electrode (AgSAE) was developed to determine sulfur in biodiesel. The novel electrochemical method was evaluated through the linear sweep adsorptive stripping voltammetry (LSAdSV), square wave adsorptive stripping voltammetry (SWAdSV) and differential pulse adsorptive stripping voltammetry (DPAdSV) in a NH3/NH4 + buffer solution (pH 9.0), containing Na2SO3. The method was applied in biodiesel microemulsion samples under optimal conditions. To this end, a ternary phase diagram was constructed, employing three components: biodiesel/propan-1-ol/buffer solution. The microemulsion with the best response was found to be 25% NH3/NH4 + buffer (pH 9.0), 5.0% biodiesel and 70% propan-1-ol. The method reached a detection limit in the order of 10−7 mol L−1 of sulfur, and recovery values between 80% and 116%. The method was applied in the determination of sulfur in biodiesel, and the amount in the samples was found to be below the value stipulated by the regulatory agencies. The method can be a promising alternative for determining sulfur in the microemulsion of biodiesel, with the ability to provide a fast response regarding the quality of this biofuel.


  • Screen-Printed Electrode Modified with 3-D Nanoporous Nickel for the Determination of Narirutin in Wastewater from Citrus Industry

    by Maisa Beluomini, Nelson Ramos Stradiotto, Maria Valnice Boldrin Zanoni

    Yellow Water (YW) is the term given to liquid residues produced from the washing of orange fruits, distilling activities of distilleries, and the production of essential oil from orange; the handling and disposal of these residues are a matter of great concern to orange industries worldwide. An average size orange plant produces about 100,000 liters of YW daily. This wastewater has a considerable amount of organic compounds with high polluting power. Citrus processing industries are commercially interested in recovering significant quantities of some usefully relevant compounds present in YW. Among the compounds that have high added value, citrus flavonoids show an important biological activities, highlighting the molecule narirutin - a flavanone glucoside, which has been shown to present interesting therapeutic properties against cancer, Alzheimer's disease, and more recently, effects against the coronavirus disease 2019 (COVID-19). So, this work reports for the first time the electrochemical determination of narirutin using three-dimensional nanostructured porous nickel with high surface area on screen-printed electrode (3DnpNi/SPE), since the literature reports only chromatographic methods for the detection and quantification of narirutin. The modified electrode was successfully developed by the dynamic hydrogen bubble template method. This method involves the evolution of hydrogen bubbles together with the metal deposition process. Thereby, these bubbles become a dynamic template for the electrochemical deposition. Compared to the non-modified SPE, the 3DnpNi/SPE presented better electrochemical performance in terms of the oxidation of narirutin. The 3DnpNi/SPE was characterized by scanning electron microscopy (SEM), proving the formation of nickel nanopores with homogeneous distribution on the electrode surface, with a diameter varying between 70 - 120 nm. The energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) showed the presence of nickel and nickel oxide in the nanostructure. The EIS technique was applied for the electrochemical characterization of the 3DnpNi/SPE. The electron-transfer resistance was analyzed using a solution of 5.0×10−3 mol L-1 [Fe(CN)6]3-/4- in 0.1 mol L-1 KCl. The results obtained were discussed in terms of Rct (charge-transfer resistance) from the equivalent circuits. It was can observe the presence of a semicircle for the unmodified SPE with Rct of 2.3 KΩ. When the SPE was modified with nanoporous nickel, the electrochemical response appeared to be close to a straight line, and the Rct value was notably lower, 39 Ω; this shows that the modification of the electrode facilitated the transfer of electrons between the redox probe and the electrode surface. The cyclic voltammetry (CV) results showed that the 3DnpNi/SPE exhibited a peak current 3.3 times greater than that of bare SPE. The oxidation process involved 1 electron and 1 proton in a single irreversible step, with the formation of phenoxyl radical, which was adsorbed on the electrode surface due to the irreversible reaction (dimerization), to form dimer products. The quantification of narirutin was conducted by differential pulse voltammetry (DPV), which showed a wide concentration range (1.0×10-7 – 1.0×10-5 mol L-1), with low detection limit (3.9×10-8 mol L-1), and excellent sensitivity (0.31 A L mol-1). The good electrochemical performance of the proposed electrode was attributed to the high density of the nanostructured porous nickel on the SPE. The inter-electrode repeatability (n=5) was investigated by CV using the concentration of 5.0×10-6 mol L-1 of narirutin in 0.1 mol L-1 citrate buffer solution (pH 4.0). The average oxidation current obtained was 2.2 µA, with RSD of 5.9 %. In addition, the 3DnpNi/SPE was stored for 10 days in contact with air at room temperature (25 °C). The current response relative to narirutin detection was found to be 94.2 % of its initial peak current value. These results show that the 3DnpNi/SPE has good repeatability and long-term stability. The standard addition method was adopted for determining the concentration of narirutin in the sample. The sample was spiked with known concentrations of standard narirutin in the range of 2.0×10-6 mol L-1 to 6.0×10-6 mol L-1. A linear relationship was observed between the current peak and the added concentration of narirutin. The regression equation was as follows: y = 0.56 x + 2.3×10-6 (R = 0.999). From the standard addition curve, and based on the extrapolation of the straight line and the sample dilution (20-fold), the concentrations of narirutin found in the yellow water sample was (8.3 ± 0.39)×10-5 mol L-1 (n=3). To determine the analytical accuracy of the proposed method, recovery experiments were performed in standard solutions. The recovery rates obtained ranged from 97.1% to 100.9%, with RSD lower than 7.0 %. The concentration of narirutin in the YW sample was also determined by HPLC and the concentration value obtained was (8.6 ± 0.25)×10-5 mol L-1. Thereby, the RSD obtained between the two techniques was 0.16 %. These results demonstrate a good agreement between the proposed method and the comparative method (HPLC); essentially, this points to the reliability of the method proposed in this work. Thus, the findings of the present study show that the proposed 3DnpNi/SPE-based electroanalytical method can certainly be used for the determination of narirutin in yellow water. Figure 1

  • Using an Electrochemical MIP Sensor for Selective Determination of 1‐Naphthol in Oilfield Produced Water

    by Mariana Bartilotti, Maísa Azevedo Beluomini, Maria Valnice Boldrin Zanoni

    A molecularly imprinted polymer (MIP) sensor was successfully constructed on glassy carbon electrode for the determination of 1‐naphthol (1‐Nph). The sensor was constructed by electropolymerization on bare GCE in the presence of the target molecule. The recognition of 1‐Nph was conducted indirectly using [Fe(CN)6]3−/4− as redox probe. The MIP sensor presented wide linear working range and limit of detection of 1.5×10−9 mol L−1. The MIP sensor was applied for the determination of 1‐Nph in oilfield produced water. The results obtained showed good selectivity and sensitivity of the proposed sensor in terms of 1‐Nph quantification.


  • Electrochemical sensors based on molecularly imprinted polymer on nanostructured carbon materials: A review

    by Maísa Azevedo Beluomini, José Luiz da Silva, Acelino Cardoso de Sá, Edervaldo Buffon, Thulio César Pereira, Nelson Ramos Stradiotto