NSNelson Ramos Stradiotto

Nelson Ramos Stradiotto

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nelson Ramos Stradiotto has a total of 228 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative voltammetric determination of ascorbic acid at three different carbon electrodes: application of carbon screen-printed electrode for citrus fruits analysis

    by Talytha Rodrigues Gaspari Paina, Izabel Cristina Eleotério, Nelson Ramos Stradiotto, Marcelo Firmino de Oliveira

    Determining the vitamin C (ascorbic acid) content in citrus fruits is crucial for dietary and nutritional considerations. Traditional analytical methods for ascorbic acid analysis often involve expensive and less portable electrodes, limiting their practicality in food analysis. This study focuses on the quantification of ascorbic acid in citrus fruits using a cost-effective and portable carbon screen-printed electrode. The efficiency of these electrodes was assessed using cyclic voltammetry and linear sweep voltammetry due to the irreversible oxidation behavior of ascorbic acid. A comparative analysis was performed with glassy carbon, carbon paste, and commercial carbon screen-printed electrodes, focusing on sensi¬tivity variations based on analyte concentration and scanning rate. The carbon screen-printed electrode demonstrated superior sensitivity to the other electrodes tested, establishing it as a practical alternative for ascorbic acid analysis in citrus fruits. This study employed the standard addition method in conjunction with linear sweep voltam¬metry to accurately determine ascorbic acid concentrations in pear-orange, Tahiti lemon, and Ponkan tangerine samples. The obtained values were cross-referenced with existing literature data, enhancing our understanding of vitamin C content in these citrus fruits. Overall, this research highlights the potential of the carbon screen-printed electrode as a valuable tool for vitamin C analysis, offering new insights into food science and nutrition.


  • Enantioselective Detection of (D)- and (L)-Limonene from Essential Oil Samples Using a Molecularly Imprinted Polypyrrole Electrochemical Sensor

    by Bruna Gabrielle Olsen, Nelson Ramos Stradiotto

    Limonene is a monoterpene compound that has two enantiomers, (D)- and (L)-limonene, in different quantities and proportions in several essential oils, and it is used in the chemical, pharmaceutical, and food industries. While the (D)-limonene is widely found in citrus, the (L)-limonene is found mainly in oils of Pinus and Mentha. The enantioselective detection holds the fact that the two isomers are found together in different quantities, in which each has its properties. The preferential use of one depends on the purpose, (D)-limonene is used in the pharmaceutical and chemical industry, while (L)-limonene has organoleptic properties and is used in the food industry, cosmetic, and personal hygiene industries. The methods existing in the literature involve the detection of the enantiomers by gas chromatography-mass spectrometry and high-performance liquid chromatography. Since the two enantiomers can be found together in different samples, is very important to have a simple and faster method to determine both. This work aims to develop an electrochemical sensor using a “dual template” technique, with both limonene enantiomers and a monomer (pyrrole), forming a molecularly imprinted polymer (MIP) film and determining the analyte “one-by-one”, by saturating the cavities of one specific enantiomer to determine the other one, using differential pulse voltammetry (DPV). This is the first electrochemical sensor for the enantioselective determination of (D) and (L)-limonene. Initially, a suspension of 0.4 mg mL-1 of graphene oxide in 0.1 mol L-1 of Na2SO4 solution was directly reduced on a glassy carbon electrode surface through chronoamperometry, applying a potential of -1.4 V for 500s. Then, AuNPs were electrodeposited from a 5.0×10-4 mol L-1 HAuCL solution in 0.5 mol L-1 H2SO4 onto the GCE/rGO electrode, also through chronoamperometry, in which a potential of 0.4 V was applied until the charge of 1.0x10-3 C was reached. Next, for the electropolymerization process, a solution containing 3.0x10-2 mol L-1 pyrrole and both (D)- and (L)-limonene enantiomers in a phosphate buffer solution (pH 7.0), was used in 5 consecutive voltammetric cycles on the GCE/rGO/AuNPS electrode, applying a potential range from 0.0 to 1.0 V in a scan rate of 0.02 V s-1, forming the MIP film. The extraction of the template molecules involved the application of 5 consecutive voltammetric cycles in NaOH 0.1 mol L-1 in a potential range from 0.0 to 1.5 V (0.05 V s-1). For the rebinding process, the electrode was placed for five minutes in different concentrations of one specific enantiomer after saturation of the other one, in PB solution pH 7.0. All the experimental parameters that influence the analytical performance of the device were optimized, such as pyrrole concentration, electropolymerization and extraction cycles, rebinding times, electropolymerization and rebinding pH, and nanoparticle charge. The electrode was characterized by scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. The analytical methodology was developed, with a limit of detection (LOD) for (D)-limonene of 1.8x10-12 mol L-1, a limit of quantification (LOQ) of 5.5x10-12 mol L-1, and an amperometric sensibility (AS) of 5.8x105 A L mol-1. For the (L)- enantiomer, the LOD, LOQ, and AS are 1.4x10-12 mol L-1, 4.3x10-12 mol L-1, and 6.2 A L mol-1, respectively. The linear range is from 2.0x10-12 to 1.0x10-11 mol L-1 for both enantiomers. It was analyzed the stability and repeatability inter and intra-day of the sensor. The selectivity study of both analytes was evaluated with the imprinted factor (α) and the selectivity factor (β) with different molecules present in the sample, showing that the sensor is capable of selectively recognizing limonene. Furthermore, this method was applied to real samples of the essential oil of orange (Citrus aurantium), the essential oil of peppermint (Mentha piperita), and the essential oil of Siberian pine (Abies sibirica). The quantification of (D)- and (L)-limonene was successfully performed using the standard addition method and the results obtained were validated by recovery assays. All relative standard deviations were below 5%. These results indicate that the proposed sensor exhibits good analytical performance, being suitable for the determination of both limonene enantiomers in essential oils. Acknowledgements: São Paulo Research Foundation (FAPESP) (Grants: 2023/00817-9 and 2017/22401-8)


  • Voltammetric determination of sulfur in biodiesel microemulsion using a silver solid amalgam electrode

    by Marco Antonio Modenes Junior, Maísa Azevedo Beluomini, Nelson Ramos Stradiotto

    Monitoring sulfur in biodiesel is of fundamental importance because even in low concentrations, it can harm the operation of the engine parts and increase the emission of toxic gases and particulate material. Hence, a simple, quick and sensitive adsorptive stripping voltammetry (AdSV) method based on a silver solid amalgam electrode (AgSAE) was developed to determine sulfur in biodiesel. The novel electrochemical method was evaluated through the linear sweep adsorptive stripping voltammetry (LSAdSV), square wave adsorptive stripping voltammetry (SWAdSV) and differential pulse adsorptive stripping voltammetry (DPAdSV) in a NH3/NH4 + buffer solution (pH 9.0), containing Na2SO3. The method was applied in biodiesel microemulsion samples under optimal conditions. To this end, a ternary phase diagram was constructed, employing three components: biodiesel/propan-1-ol/buffer solution. The microemulsion with the best response was found to be 25% NH3/NH4 + buffer (pH 9.0), 5.0% biodiesel and 70% propan-1-ol. The method reached a detection limit in the order of 10−7 mol L−1 of sulfur, and recovery values between 80% and 116%. The method was applied in the determination of sulfur in biodiesel, and the amount in the samples was found to be below the value stipulated by the regulatory agencies. The method can be a promising alternative for determining sulfur in the microemulsion of biodiesel, with the ability to provide a fast response regarding the quality of this biofuel.


  • Screen-Printed Electrode Modified with 3-D Nanoporous Nickel for the Determination of Narirutin in Wastewater from Citrus Industry

    by Maisa Beluomini, Nelson Ramos Stradiotto, Maria Valnice Boldrin Zanoni

    Yellow Water (YW) is the term given to liquid residues produced from the washing of orange fruits, distilling activities of distilleries, and the production of essential oil from orange; the handling and disposal of these residues are a matter of great concern to orange industries worldwide. An average size orange plant produces about 100,000 liters of YW daily. This wastewater has a considerable amount of organic compounds with high polluting power. Citrus processing industries are commercially interested in recovering significant quantities of some usefully relevant compounds present in YW. Among the compounds that have high added value, citrus flavonoids show an important biological activities, highlighting the molecule narirutin - a flavanone glucoside, which has been shown to present interesting therapeutic properties against cancer, Alzheimer's disease, and more recently, effects against the coronavirus disease 2019 (COVID-19). So, this work reports for the first time the electrochemical determination of narirutin using three-dimensional nanostructured porous nickel with high surface area on screen-printed electrode (3DnpNi/SPE), since the literature reports only chromatographic methods for the detection and quantification of narirutin. The modified electrode was successfully developed by the dynamic hydrogen bubble template method. This method involves the evolution of hydrogen bubbles together with the metal deposition process. Thereby, these bubbles become a dynamic template for the electrochemical deposition. Compared to the non-modified SPE, the 3DnpNi/SPE presented better electrochemical performance in terms of the oxidation of narirutin. The 3DnpNi/SPE was characterized by scanning electron microscopy (SEM), proving the formation of nickel nanopores with homogeneous distribution on the electrode surface, with a diameter varying between 70 - 120 nm. The energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) showed the presence of nickel and nickel oxide in the nanostructure. The EIS technique was applied for the electrochemical characterization of the 3DnpNi/SPE. The electron-transfer resistance was analyzed using a solution of 5.0×10−3 mol L-1 [Fe(CN)6]3-/4- in 0.1 mol L-1 KCl. The results obtained were discussed in terms of Rct (charge-transfer resistance) from the equivalent circuits. It was can observe the presence of a semicircle for the unmodified SPE with Rct of 2.3 KΩ. When the SPE was modified with nanoporous nickel, the electrochemical response appeared to be close to a straight line, and the Rct value was notably lower, 39 Ω; this shows that the modification of the electrode facilitated the transfer of electrons between the redox probe and the electrode surface. The cyclic voltammetry (CV) results showed that the 3DnpNi/SPE exhibited a peak current 3.3 times greater than that of bare SPE. The oxidation process involved 1 electron and 1 proton in a single irreversible step, with the formation of phenoxyl radical, which was adsorbed on the electrode surface due to the irreversible reaction (dimerization), to form dimer products. The quantification of narirutin was conducted by differential pulse voltammetry (DPV), which showed a wide concentration range (1.0×10-7 – 1.0×10-5 mol L-1), with low detection limit (3.9×10-8 mol L-1), and excellent sensitivity (0.31 A L mol-1). The good electrochemical performance of the proposed electrode was attributed to the high density of the nanostructured porous nickel on the SPE. The inter-electrode repeatability (n=5) was investigated by CV using the concentration of 5.0×10-6 mol L-1 of narirutin in 0.1 mol L-1 citrate buffer solution (pH 4.0). The average oxidation current obtained was 2.2 µA, with RSD of 5.9 %. In addition, the 3DnpNi/SPE was stored for 10 days in contact with air at room temperature (25 °C). The current response relative to narirutin detection was found to be 94.2 % of its initial peak current value. These results show that the 3DnpNi/SPE has good repeatability and long-term stability. The standard addition method was adopted for determining the concentration of narirutin in the sample. The sample was spiked with known concentrations of standard narirutin in the range of 2.0×10-6 mol L-1 to 6.0×10-6 mol L-1. A linear relationship was observed between the current peak and the added concentration of narirutin. The regression equation was as follows: y = 0.56 x + 2.3×10-6 (R = 0.999). From the standard addition curve, and based on the extrapolation of the straight line and the sample dilution (20-fold), the concentrations of narirutin found in the yellow water sample was (8.3 ± 0.39)×10-5 mol L-1 (n=3). To determine the analytical accuracy of the proposed method, recovery experiments were performed in standard solutions. The recovery rates obtained ranged from 97.1% to 100.9%, with RSD lower than 7.0 %. The concentration of narirutin in the YW sample was also determined by HPLC and the concentration value obtained was (8.6 ± 0.25)×10-5 mol L-1. Thereby, the RSD obtained between the two techniques was 0.16 %. These results demonstrate a good agreement between the proposed method and the comparative method (HPLC); essentially, this points to the reliability of the method proposed in this work. Thus, the findings of the present study show that the proposed 3DnpNi/SPE-based electroanalytical method can certainly be used for the determination of narirutin in yellow water. Figure 1

  • Electrochemical sensor based on reduced graphene oxide and molecularly imprinted poly(phenol) for d-xylose determination

    by Luiz Felipe Pompeu Prado Moreira, Edervaldo Buffon, Nelson Ramos Stradiotto


  • Electrochemical sensing of lactate by using an electrode modified with molecularly imprinted polymers, reduced graphene oxide and gold nanoparticles

    by Thulio César Pereira, Nelson Ramos Stradiotto

    This paper reports on a sensitive and selective electrochemical sensor for lactic acid. The sensor is based on molecularly imprinted polymers (MIP), obtained on glassy carbon electrode (GCE) modified with reduced graphene oxide and gold nanoparticles. The MIP was obtained by electropolymerization of the o-phenylenediamine (o-PD) on the modified surface of the GCE in the presence of lactic acid. The steps involving the GCE modification and MIP construction were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy and atomic force microscopy. The results were evaluated using differential pulse voltammetry, using the hexacyanoferrate redox system as an electrochemical probe. Under optimized experimental conditions, the imprinted sensor has a linear response in the 0.1 nM to 1.0 nM lactic acid concentration range, with detection limit of 0.09 nM. The sensor exhibits excellent selectivity in the presence of molecules of similar chemical structure. It was applied for the selective determination of lactic acid in sugarcane vinasse. The recovery values ranged from 97.7 to 104.8%.