Aref Afsharfard
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Aref Afsharfard has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Kyung Chun Kim
Eco-friendly Smart Ship Parts Technology Innovation Center, Pusan National University, Busan 46241, Republic of Korea
10 shared publications - Anooshiravan Farshidianfar
Ferdowsi University of Mashhad
5 shared publications - Amirreza Shahsavari
Eco-friendly Smart Ship Parts Technology Innovation Center, Pusan National University, Busan 46241, Republic of Korea
4 shared publications Kyung Chun Kim
3 shared publicationsAhmad Saadatinasab
Ferdowsi University of Mashhad
2 shared publicationsAli Jafari
Dept. of Mechanical and Aerospace Engineering University at Buffalo (SUNY) 14260-4400 Buffalo NY USA
2 shared publications
Latest Publications
- 16 October 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 372
Fluid–structure interaction analysis of an asymmetric thin downstream bluff body for a tandem bladeless wind turbine
- 16 October 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 372
Fluid–structure interaction analysis of an asymmetric thin downstream bluff body for a tandem bladeless wind turbine
- Open Access
Portable Ocean Wave Energy Harvesters: Recent Advances, Challenges, and Future Perspectives
Portable Ocean Wave Energy Harvesters (POWEH) offer a potential approach for supplying autonomous low-power marine sensing systems; however, their long-term reliability, durability, and economic viability remain insufficiently demonstrated. But conventional wave energy converters are often big, expensive, and fixed to seabed structures, which makes it hard to use them in different places and makes it hard to sell them. People have been paying more attention to portable ocean wave energy harvesters in recent years. These are small, light systems that can be set up anywhere and do not need to be moored or anchored. These devices are meant to power autonomous ocean sensors, emergency buoys, and maritime applications that do not need to be connected to the grid. This review looks closely at the development trends, structural designs, and power take-off mechanisms of portable wave energy systems. We compare different types of harvesters, such as mechanical, electromagnetic, piezoelectric, and hybrid ones, based on their design principles, conversion efficiency, and scalability. Focus is directed towards the importance of symmetry in structural design, dynamic response, and energy conversion. The structure, whether symmetric or asymmetric, has a crucial role in determining mass distribution, stiffness traits, vibrational dynamics, hydrodynamic loading, and the capture of multi-directional wave energy, thereby influencing the overall performance, resilience, and stability of portable harvesters. The review goes on to talk about the main problems with dynamic stability, frequency tuning, environmental adaptability, and energy management when things are portable. Finally, new strategies like nonlinear dynamic designs, self-tuning mooring systems, and hybrid energy integration are suggested as ways to improve performance and reliability. The insights from this review are meant to help future innovations that will make it possible to use portable ocean wave energy technologies in a practical and long-lasting way.
Open AccessPortable Ocean Wave Energy Harvesters: Recent Advances, Challenges, and Future Perspectives
Portable Ocean Wave Energy Harvesters (POWEH) offer a potential approach for supplying autonomous low-power marine sensing systems; however, their long-term reliability, durability, and economic viability remain insufficiently demonstrated. But conventional wave energy converters are often big, expensive, and fixed to seabed structures, which makes it hard to use them in different places and makes it hard to sell them. People have been paying more attention to portable ocean wave energy harvesters in recent years. These are small, light systems that can be set up anywhere and do not need to be moored or anchored. These devices are meant to power autonomous ocean sensors, emergency buoys, and maritime applications that do not need to be connected to the grid. This review looks closely at the development trends, structural designs, and power take-off mechanisms of portable wave energy systems. We compare different types of harvesters, such as mechanical, electromagnetic, piezoelectric, and hybrid ones, based on their design principles, conversion efficiency, and scalability. Focus is directed towards the importance of symmetry in structural design, dynamic response, and energy conversion. The structure, whether symmetric or asymmetric, has a crucial role in determining mass distribution, stiffness traits, vibrational dynamics, hydrodynamic loading, and the capture of multi-directional wave energy, thereby influencing the overall performance, resilience, and stability of portable harvesters. The review goes on to talk about the main problems with dynamic stability, frequency tuning, environmental adaptability, and energy management when things are portable. Finally, new strategies like nonlinear dynamic designs, self-tuning mooring systems, and hybrid energy integration are suggested as ways to improve performance and reliability. The insights from this review are meant to help future innovations that will make it possible to use portable ocean wave energy technologies in a practical and long-lasting way.
- Open Access
- 19 May 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Impact of atmospheric boundary layer on large-scale BWEH performance: Empirical and numerical wake modification study
- 19 May 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Open AccessImpact of atmospheric boundary layer on large-scale BWEH performance: Empirical and numerical wake modification study
Enhancing oscillations of bladeless wind energy harvesters with a downstream obstacle for bluff body
- 17 September 2025
- Published by Elsevier in Energy Conversion and Management
- Vol. 346
Nonlinear ocean wave energy harvester: A novel mooring-based design for enhanced energy conversion
- 17 September 2025
- Published by Elsevier in Energy Conversion and Management
- Vol. 346
Nonlinear ocean wave energy harvester: A novel mooring-based design for enhanced energy conversion
- Open Access
Metamaterial Bi-stable Vibration Absorbers for Railway Tracks: Experimental Study of Flexural Wave Control
Subway rail vibrations result in serious problems in urban railway systems as they cause structural damage, as well as increase noise pollution and discomfort of passengers. This paper aims to present an experimental study on the application of Dynamic Vibration Absorbers (DVAs) to reduce unwanted rail vibrations. The effectiveness of various DVA configurations was evaluated using Experimental Modal Analysis (EMA) and stochastic vibration analysis on a UIC60/60E1 rail. The results of the study show that well-designed DVAs can decrease vibration by up to 74%, while periodic installations with a 1 m span create a grid-like structure that exhibits metamaterial behavior, enhancing suppression up to 98%. This periodic arrangement leads to attenuation in critical frequency bands due to flexural wave interference effects. Further, Random vibration analysis is also performed to assess the real performance of DVAs under stochastic excitations, and the results show that the RMS reduction is, on an average, 12%. The results of the study show that DVAs are portable, non-invasive, and very efficient systems for the management of railway vibration, as well as the reduction of the effects on the environment and enhancing the strength of the infrastructure.
Open AccessMetamaterial Bi-stable Vibration Absorbers for Railway Tracks: Experimental Study of Flexural Wave Control
Subway rail vibrations result in serious problems in urban railway systems as they cause structural damage, as well as increase noise pollution and discomfort of passengers. This paper aims to present an experimental study on the application of Dynamic Vibration Absorbers (DVAs) to reduce unwanted rail vibrations. The effectiveness of various DVA configurations was evaluated using Experimental Modal Analysis (EMA) and stochastic vibration analysis on a UIC60/60E1 rail. The results of the study show that well-designed DVAs can decrease vibration by up to 74%, while periodic installations with a 1 m span create a grid-like structure that exhibits metamaterial behavior, enhancing suppression up to 98%. This periodic arrangement leads to attenuation in critical frequency bands due to flexural wave interference effects. Further, Random vibration analysis is also performed to assess the real performance of DVAs under stochastic excitations, and the results show that the RMS reduction is, on an average, 12%. The results of the study show that DVAs are portable, non-invasive, and very efficient systems for the management of railway vibration, as well as the reduction of the effects on the environment and enhancing the strength of the infrastructure.
- 25 March 2025
- Published by Springer Nature
- p. 133-139
Design and Study Performance of Vibration-Based Mechanical Energy Harvester and Reservoir
- 25 March 2025
- Published by Springer Nature
- p. 133-139
Design and Study Performance of Vibration-Based Mechanical Energy Harvester and Reservoir
- Open Access
- 2 January 2025
- Published by Springer Nature in Research Square
Investigating Application of Nonlinear Semi-active Impact Dampers for Suppressing Forced Vibrations
In this study, the effects of utilizing a vibro-impact electromechanical device to suppress undesired vibrations are investigated. The demonstrated vibro-impact system serves as a vibration suppressor and provides the necessary energy for its sensors and control components, making it a potentially autonomous system. The electromechanical equation of motion for the system under examination is calculated and experimentally verified. Also, the effect of adjusting the gap size, a crucial parameter of the Vibro-impact system, on its electromechanical performance of the system is investigated. Additionally, the effectiveness parameter is announced as a parameter that results in enhancing the energy harvesting and vibration-suppressing capabilities of the demonstrated vibro-impact system. Finally, it is demonstrated that the characteristics of the electromagnetic vibro-impact system can be tuned as an effective autonomous semi-active impact damper system.
- 2 January 2025
- Published by Springer Nature in Research Square
Open AccessInvestigating Application of Nonlinear Semi-active Impact Dampers for Suppressing Forced Vibrations
In this study, the effects of utilizing a vibro-impact electromechanical device to suppress undesired vibrations are investigated. The demonstrated vibro-impact system serves as a vibration suppressor and provides the necessary energy for its sensors and control components, making it a potentially autonomous system. The electromechanical equation of motion for the system under examination is calculated and experimentally verified. Also, the effect of adjusting the gap size, a crucial parameter of the Vibro-impact system, on its electromechanical performance of the system is investigated. Additionally, the effectiveness parameter is announced as a parameter that results in enhancing the energy harvesting and vibration-suppressing capabilities of the demonstrated vibro-impact system. Finally, it is demonstrated that the characteristics of the electromagnetic vibro-impact system can be tuned as an effective autonomous semi-active impact damper system.
- 22 December 2024
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 53 (4) , 845-854
Developing a Structurally Modified Mechanical Lumped Model of the Human Tibia and Shin Guard Using Modal Analysis
Shins are one of the most vulnerable bones in human body. Shin guards are evaluated by their effectiveness in reducing the force applied to the bone. In this study, a structural modified mechanical lumped model of the shin guard was developed to provide maximum force distribution using physical parameter change modification technique and genetic algorithm. Modal analysis and finite element methods were used to determine the dynamic behavior of the system in the frequency range of 0–3000 Hz. In this research, FE results had an encouraging agreement with those in experimental test with a Mean Absolute Error (MAE) found as 34.94. The results proposed two design zones to select the stiffness of the shin guard. The stiffnesses K1 and K2 were selected between the values in the design zones. For situation, K1 = 7.9 × 105 N/m and K2 = 6.3 × 105 N/m, the distribution parameter was equal to 76% and f1 = 1.87F, f2 = 0.71F f3 = 1.81F, meaning the force was effectively distributed.
- 22 December 2024
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 53 (4) , 845-854
Developing a Structurally Modified Mechanical Lumped Model of the Human Tibia and Shin Guard Using Modal Analysis
Shins are one of the most vulnerable bones in human body. Shin guards are evaluated by their effectiveness in reducing the force applied to the bone. In this study, a structural modified mechanical lumped model of the shin guard was developed to provide maximum force distribution using physical parameter change modification technique and genetic algorithm. Modal analysis and finite element methods were used to determine the dynamic behavior of the system in the frequency range of 0–3000 Hz. In this research, FE results had an encouraging agreement with those in experimental test with a Mean Absolute Error (MAE) found as 34.94. The results proposed two design zones to select the stiffness of the shin guard. The stiffnesses K1 and K2 were selected between the values in the design zones. For situation, K1 = 7.9 × 105 N/m and K2 = 6.3 × 105 N/m, the distribution parameter was equal to 76% and f1 = 1.87F, f2 = 0.71F f3 = 1.81F, meaning the force was effectively distributed.