JJJari Juuti

Jari Juuti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jari Juuti has a total of 203 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Self-Healing Passive UHF RFID Elastomeric Tags Based on Slot-Type Antennas With Verified Performance Recovery After Mechanical Damage

    by Nikta Pournoori, Ahmed Albeltagi, Toni Björninen, Neea Oinas, Jarkko Tolvanen, Jari Juuti, Leena Ukkonen

    Self-healing materials have emerged as key enablers for flexible and stretchable electronics, particularly in applications requiring resilience under repeated mechanical stress and autonomous recovery. In this work, we present the development and characterization of two fully self-healing passive UHF RFID elastomeric tag antennas, designed with diamond and elliptical slot geometries. Both antennas are fabricated on a soft self-healing elastomer substrate, and an electrically conductive liquid metal-based elastomer is employed as the conductive element. Compared to previous studies, a significant advancement in our work is the increase of the electrical conductivity of the self-healing radiator to ∼20 kS/m, which provides improved antenna impedance characteristics and proper radiation performance. Both antenna prototypes achieve read ranges between 5 to 6.7 m within the 860–960 MHz frequency band, aligning well with simulated results. Measurements after full antenna bisection show sub-minute recovery, with read range restored to 93–100% of the initial level within 60 seconds. The RFID chip is directly mounted onto the conductor without adhesives, preserving both electrical properties and mechanical recovery after physical damage. The attained results demonstrate the feasibility of constructing reliable and recoverable antenna systems entirely from self-healing materials and highlight their potential in the long-term deployment of soft and resilient wireless systems.


  • Open Access

    Actuating Liquid Metal in Microchannels With Minimized Electrolyte for Reconfigurable RF Applications

    by Maheeja Maddegalla, Veikka Korhonen, Tung Duy Phan, Jaakko Palosaari, Tuomo Siponkoski, Sami Myllymäki, Michael D. Dickey, Jari Juuti, Ping Jack Soh

    Surfaces with reconfigurable conductive elements are key enabling technologies for 6G communications. They require fast, reliable, and low-loss reconfiguration mechanisms. This work presents a method for actuating liquid metal (LM), eutectic gallium–indium (EGaIn). Conventional hydraulic actuation of LM (via bulk carrier liquids) causes metal fragmentation, high actuation pressure, and degradation in electromagnetic (EM) performance. EGaIn is particularly difficult to move reliably because it forms a native oxide that sticks to the walls of channels. To address these challenges, a method to minimize carrier liquid is demonstrated. Laser-micromachined glass microchannels are employed, where the fabrication process inherently produces rough walls. This roughness enables a microscopically thin NaOH(aq) film to be formed only at the interface between the microchannel and EGaIn. This film layer can readily remove the oxide skin, resulting in stable and low-friction actuation.[2026-0022]

  • Open Access

    A General Method for Designing Highly Efficient Reflective Metasurface under Arbitrary Incidence

    by Di Kong, Tung Duy Phan, Niina Halonen, Sami Myllymäki, Jari Juuti, Aarno Pärssinen, Ping Jack Soh

    This paper presents a generalized method for designing highly efficient perfect anomalous reflective metasurfaces (PARMs) under arbitrary incident angles for 6G wireless communication. Being conventionally designed using gradient-phase method, these metasurfaces rely on the assumption of local periodicity and normal incidence. However, their performance can degrade at oblique incident angles due to angular dispersion and violation of phase-matching conditions. To address this, a theoretical framework that incorporates the angular dependence of both phase gradients and structural periodicity is established. In this work, the statistical deviations of the responses of local unit cells (UCs) is modelled using the von Mises distribution, deriving the predistorted phase profiles that compensate for mutual coupling and structural perturbations. The proposed method is validated via design, simulation, fabrication, and measurement of four different PARMs at 155 GHz, achieving reflection efficiencies exceeding 88% with varying incident and reflection angles. The results confirm that this method generalizes metasurface design to a wider spectrum of configurations while substantially reducing the computational cost for arbitrary incident wavefronts, thereby facilitating efficient and scalable implementations in future reflective reconfigurable intelligent surfaces (RISs).

  • Open Access

    Self‐Soldering, Stretchable and Self‐Healing Liquid Metal Elastomer Interconnections for Soft Electronics Platforms

    by Su Thiri San, Ahmed Albeltagi, Mikko Nelo, Jari Juuti, Jarkko Tolvanen, Jari Hannu

    Soft electronics systems are increasingly dependent on direct integration of surface mount devices (SMD) to achieve advanced sensing, computing, and communication functions. Yet, a fundamental bottleneck for assembling highly deformable and durable electronics arises from an inability of the current bonding strategies to maintain stable electro‐mechanical interfaces, together with the inherent strain sensitivity of most soft conductors. Here, we introduce the strain‐insensitive, electrically conductive liquid metal elastomer (ECLME) that incorporates pressure‐sensitive adhesion and autonomous self‐healing to enable robust adhesion for soft electronic platforms. Photothermal activation of ECLME results in heterogeneous liquid metal microparticle‐rich pathways that deliver high conductivity (>20 000 S cm −1 under strain) and extreme stretchability (up to 600%) in fully assembled devices. Optimized self‐soldering interconnects that enable stable and reliable contact with SMDs, maintaining electrical performance under substantial deformation ( R/R 0 < 5 up to 400%) while providing strong mechanical adhesion (pull‐out strength ∼200 kPa). The SMD‐integrated interconnects further maintain ultralow resistance fluctuations during repeated stretching, demonstrating reliable cyclic performance. Together, these combined attributes establish ECLME interconnects as a scalable and practical interconnect platform for next‐generation soft electronic systems requiring mechanically resilient, high‐performance package and chip integration.


  • Open Access

    Evaluating Phosphonic Acid Additives for Enhanced Stability in Carbon-based Printable Perovskite Solar Cells

    by Cuc Thi Kim Mai, Masoud Karimipour, Jaakko Thi Kim Palosaari, Palanivel Molaiyan, Mikko Nelo, Carys Angharad Worsley, Stéphanie Narbey, Monica Lira-Cantu, Jari Juuti

    This work investigates bifunctional phosphonic acid additives, 3-phosphonopropionic acid (H3PP) and 6-phosphonohexanoic acid (H6PP), with different molecular lengths in carbon-based printable perovskite solar cells (CPSCs). NMR and XPS analyses suggest hydrogen-bonding interactions between the additives and the organic ammonium components of the perovskite. These interactions are associated with improved interfacial charge transfer and suppressed ionic accumulation within the devices, while modifying perovskite crystal structure evidenced by redistributed diffraction intensities and reduced lattice microstrain. As a result, devices incorporating H3PP and H6PP achieve average power conversion efficiencies (PCEs) of [[EQUATION]]10.2%, compared with [[EQUATION]]9.3% for the untreated reference, together with reduced hysteresis. Notably, the difference in alkyl chain length between H3PP and H6PP affects their interactions with the perovskite, thereby influencing device stability. The H3PP- and H6PP-modified devices retain [[EQUATION]]60% and [[EQUATION]]75% of their initial PCEs, respectively, after 1025 h of aging at 65 °C and 85% RH (ISOS-D-3), whereas the reference degrades to [[EQUATION]]44%. These results indicate that in addition to ionic accumulation suppression by phosphonic acid molecules, molecular length and hydrogen-bonding capability are crucial for ion immobilization and device stability.

  • Open Access

    Sub-THz Reconfigurable Beam-Splitting Reflector Using Actuated Liquid Metal

    by Tung Duy Phan, Jaakko Palosaari, Di Kong, Tuomo Siponkoski, Sami Myllymäki, Aarno Pärssinen, Michael D. Dickey, Jari Juuti, Ping Jack Soh

  • Open Access

    A Simplified Method for Designing Highly Efficient Reflective Metasurfaces With Wide Steering Angles

    by Di Kong, Tung Duy Phan, Jaakko Palosaari, Jari Juuti, Aarno Pärssinen, Ping Jack Soh

    Reconfigurable intelligent surfaces (RISs) are envisioned as a key enabler in the sub-Terahertz (sub-THz) 6 G bands to overcome the limited coverage and range, with the goal of creating a smart radio environment. However, conventional RISs are limited in terms of efficiency ( $< 50\%$ ) and steering angles ( $< 50^\circ$ ). While highly efficient perfect anomalous reflector (PAR) has been recently introduced, its design and optimization process, which relies on impedance matching, require complex analyses and/or resource-intensive optimization. This work presents a simplified approach to design such PAR-based metasurfaces, aimed at achieving their reflection efficiency. As a case study, a set of sub-THz reflective surfaces with varying steering angles is designed using this approach, prior to its fabrication and experimental evaluations. From the results, it is observed that the simulation results are in good agreement with measurements, with reflection efficiencies of at least 84% when steered at wide angles of up to 68 $^\circ$ . This method offers a highly efficient design procedure compared to conventional approaches, especially at broad steering angles.


  • Open Access

    Recycling hazardous and energy-demanding piezoelectric ceramics using an oxide–halide perovskite upside-down composite method

    by Sivagnana Sundaram Anandakrishnan, Mohadeseh Tabeshfar, Mikko Nelo, Jani Peräntie, Heli Jantunen, Jari Juuti, Yang Bai

    Piezoelectric ceramics are widely employed in electromechanical coupling components such as sensors, actuators, and transducers owing to their excellent performance, cost-effectiveness, versatile shapes and configurations, and generous chemical/functional tuneability. However, most piezoceramics contain a significant amount of hazardous and toxic element, Pb, which is considered unsustainable. Although more environmentally friendly, Pb-free counterparts have been developed, production of both Pb-containing and Pb-free piezoceramics still demands high energy consumption. On the other hand, retired and rejected piezoceramics are not properly recycled, leaving a large ecological footprint behind the piezoelectric industry. Thus, there is a need for proper recycling methods which give wasted piezoceramics a second life at only a marginal energy cost, so that the energy and environmental footprints are minimized before the piezoceramics are permanently disposed. This work demonstrates the fabrication and use of oxide halide perovskite composites to recycle piezoceramics. The composites consist of oxide perovskite piezoceramic particles as the fillers that mimic crushed/recycled piezoceramics and an organometal halide perovskite, PTMA-CdCl3 (PTMA is C6H5N(CH3)3), as the matrix/binder. The composites consume only about 1% of the energy budget required for making new equivalent piezoceramics whilst retaining comparable capabilities for sensing applications. The results suggest that such a recycling method is transferrable to a broad range of piezoceramics and provides an incentive to possibly extend the method towards simultaneously recycling halide perovskite solar cells in the future.


  • Open Access

    Oxide‐Halide Perovskite Composites for Simultaneous Recycling of Lead Zirconate Titanate Piezoceramics and Methylammonium Lead Iodide Solar Cells

    by Mohadeseh Tabeshfar, Mikko Nelo, Sivagnana Sundaram Anandakrishnan, Maliha Siddiqui, Jani Peräntie, Pavel Tofel, Heli Jantunen, Jari Juuti, Yang Bai

    Global concerns over energy availability and the environment impose an urgent requirement for sustainable manufacturing, usage, and disposal of electronic components. Piezoelectric and photovoltaic components are being extensively used. They contain the hazardous element, Pb (e.g., in widely used and researched Pb(Zr,Ti)O3 and halide perovskites), but they are not being properly recycled or reused. This work demonstrates the fabrication of upside‐down composite sensor materials using crushed ceramic particles recycled from broken piezoceramics, polycrystalline halide perovskite powder collected from waste dye‐sensitized solar cells, and crystal particles of a Cd‐based perovskite composition, C6H5N(CH3)3CdBr3xCl3(1–x). The piezoceramic and halide perovskite particles are used as filler and binder, respectively, to show a proof of concept for the chemical and microstructural compatibility between the oxide and halide perovskite compounds while being recycled simultaneously. Production of the recycled and reusable materials requires only a marginal energy budget while achieving a very high material densification of >92%, as well as a 40% higher piezoelectric voltage coefficient, i.e., better sensing capability, than the pristine piezoceramics. This work thus offers an energy‐ and environmentally friendly approach to the recycling of hazardous elements as well as giving a second life to waste piezoelectric and photovoltaic components.


  • Open Access

    Piezoelectric Energy Harvesting from Rotational Motion to Power Industrial Maintenance Sensors

    by Jaakko Palosaari, Jari Juuti, Heli Jantunen

    In industry, forecasting machinery failures could save significant time and money if any maintenance breaks are predictable. The aim of this work was to develop an energy harvesting system which could, in theory, power condition monitoring sensors in heavy machinery. In this study, piezoelectric-cantilever-type energy harvesters were attached to a motor and spun around with different rotational speeds. A mass was placed on the tip of the cantilevers, which were mounted pointing inward toward the center axis of the motor. Pointing a cantilever tip inward and increasing the distance from the center axis of the motor decreased the natural resonance frequency significantly and thus enabled higher harvested energy levels with lower rotational frequencies. Motion of the cantilever was also controlled by altering the movement space of the tip mass. This created another possibility to control the cantilever dynamics and prevent overstressing of the piezoelectric material. Restricting the movement of the tip mass can also be used to harvest energy over a wider frequency range and prevent the harvester from getting trapped into a stagnant position. The highest calculated raw power of 579.2 µW at 7.4 Hz rotational frequency was measured from a cantilever with outer dimensions of 25 mm × 100 mm. Results suggest that an energy harvesting system with multiple cantilevers could be designed to replace batteries in condition sensors monitoring revolving machinery.