YSYukitaka Shinoda

Yukitaka Shinoda

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yukitaka Shinoda has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis and visualization of conducting movements of professionals and music college students using optical motion capture system

    by Yukitaka Shinoda, Yuta Tsukada, Naoki Shibata, Tatsuya Yamaguchi, Yuki Mito, Gyochi Yoshida, Daisuke Komazawa, Hiroshi Kawakami

    The purpose of this study is to compare the conducting movements of professional conductors and music college students using optical motion capture system and to reveal the characteristics of the conducting movements of professionals and music college students, as well as the differences in the conducting movements in emotional expression. This paper reports on the use of an optical motion capture system to measure the conducting movements of professionals and music college students in three-dimensional space and the comparative examination and visualization of the conducting movements. Motion analysis was performed to compare the conducting movements of four professional conductors and four music college students, who expressed six emotions. In addition, the correlation coefficient between the movements of the left and right wrists was calculated, and the independence of the left and right arms during conducting was examined. Finally, this paper reports on the creation of a measurement space for measuring actual conducting movements using 3DCG, and the visualization of conducting movements.

  • Open Access

    Fiber Bragg Grating Interrogation System Combining Wavelength-Swept Laser and Convolutional Neural Network

    by Tatsuya Yamaguchi, Hiroto Kawashima, Hiroki Matsuda, Yukitaka Shinoda

    We propose a novel deep learning approach to improve the multipoint performance of fiber Bragg grating (FBG) interrogation systems with high-speed wavelength-swept lasers. Because conventional interrogation systems use wavelength-division multiplexing for multipointing FBGs, the number of FBGs is limited by the wavelength bandwidth of the light source. To overcome this, we attempted to improve the multipoint performance of wavelength-division multiplexing by using multiple FBGs of the same wavelength. However, it is difficult to analyze the peak wavelengths of individual FBGs using a high-speed wavelength-swept laser because the optical spectra of FBGs at the same wavelength are observed to occur in a complex overlapping manner on the microsecond order. Here, we present a peak-detection method based on a convolutional neural network (CNN) in deep learning as a breakthrough in solving this problem. The experiment combines a high-speed wavelength-swept laser and a CNN to achieve high-speed measurement of three overlapping FBGs at the same wavelength. The results demonstrate that a measurement rate of 50 kHz and a wavelength resolution of 4.2 pm can be achieved, improving the limit of wavelength-division multiplexing by a factor of three. Our approach is to simply incorporate peak detection with CNN into existing wavelength-swept laser-based interrogators, which can function as if they were interrogators with several times the multipoint performance.


  • Open Access

    Experimental Demonstration of Peak Wavelength Measurement of Multiplexing Fiber Bragg Gratings Using Convolutional Neural Network

    by Tatsuya Yamaguchi, Hiroto Kawashima, Hiroki Matsuda, Yukitaka Shinoda

    We propose a peak detection method for measuring fiber Bragg gratings (FBGs) using convolutional neural network (CNN) to improve the performances of wavelength division multiplexing. In wavelength division multiplexing, each FBG occupies a certain wavelength range; therefore, the number of FBGs that can be installed is limited by the wavelength band of the light source. To address this issue, methods for overlapping multiple FBGs of the same wavelength within a single occupied wavelength range have been studied. This contributes to improving the limit of multipoint FBGs manifold. However, this method results in the complex overlapping of multiple FBG reflectance spectra making it difficult to accurately measure the peak wavelengths of individual FBGs using conventional peak detection methods. Therefore, we developed a peak detection process using CNN, which is suitable for identifying unique feature data. Each FBG of the same wavelength was characterized to have a unique spectral shape by assigning a different full width at half maximum to each. We introduced noise-additive learning, a well-known method of data augmentation that increases tolerance to variations in the experimental signal. As a result, the standard deviation for peak wavelength detection significantly improved to 2.8 pm and the strain measurements with three complex overlapping FBGs were successfully demonstrated. The CNN model is the first to solve the problem of three overlapping FBGs for arbitrary wavelength changes. Furthermore, the developed peak detection process was found to be applicable to measurements that combined multiplexing of FBGs of either identical or different wavelengths.


  • Open Access

    Real-Time Spectroscopy System for Continuous Measurement With Fourier-Domain Mode-Locked Laser at 1550 nm

    by Tatsuya Yamaguchi, Wataru Endo, Yukitaka Shinoda

    We developed a real-time spectroscopy system for continuous measurement using a Fourier-domain mode-locked (FDML) laser. The FDML laser was driven at a sweep rate of 50 kHz in the near-infrared region of 1550 nm. To achieve robust real-time measurement, the spectroscopy system properly designs the pulse modulation of the FDML laser and the length of the reference optical path. The intensity fluctuation of the FDML laser was corrected by introducing a reference optical path. We demonstrated that the spectroscopy system performs continuous measurements for 1 min or more with a time resolution of 20 μs.


  • Open Access

    High-Speed Interrogation System for Fiber Bragg Gratings With Buffered Fourier Domain Mode-Locked Laser

    by Tatsuya Yamaguchi, Wataru Endo, Yukitaka Shinoda

    We develop a high-speed interrogation system with a wavelength-swept laser for sensing multiplexed fiber Bragg gratings (FBGs). High-speed and multipoint sensing is achieved by means of a buffered Fourier domain mode-locked (FDML) laser, a recently proposed high-speed wavelength-swept laser. This laser increases the measurement rate several times by tailoring the laser output with a buffer stage. The developed buffered FDML laser successfully achieves a measurement rate of 202.8 kHz using a general FDML laser driven at a sweep rate of 50.7 kHz. In order to detect reflection signals of FBGs at the high measurement rate, the measurement system introduces digital signal processing using a field programmable gate array (FPGA). However, FBG measurements with wavelength-swept lasers are affected by the propagation time (delay) in the optical fiber connecting from the laser to the FBG sensor, which reduces measurement accuracy. To overcome this limitation, the developed system uses a delay correction method with bidirectional sweep of the buffered FDML laser. The interrogation system with the buffered FDML laser achieves a time resolution of 4.9 μs without being affected by the delay.


  • Open Access

    Interrogation System With Automatic Recognition and Delay Correction Functions of Fiber Bragg Gratings by Pulse Modulation With Wavelength-Swept Laser

    by Tatsuya Yamaguchi, Wataru Endo, Yukitaka Shinoda

    We propose an interrogation-system with automatic recognition and delay correction functions of fiber Bragg gratings (FBGs) by pulse modulation with a wavelength-swept laser. By pulse-modulating the light of a wavelength-swept laser, light with an arbitrary wavelength bandwidth can be extracted as the pulsed light. In the automatic recognition function of FBGs, the pulsed light is sequentially controlled to match the wavelength bandwidth of each FBG. This recognition method enables the selection and detection of a reflection signal from a single FBG. Therefore, reflection signals from multiple FBGs can be recognized individually. When multiple FBGs are installed at long distances, the reflection signal of each FBG is affected by the propagation time (delay). In the interrogation system with the wavelength-swept laser, the delay lowers the measurement accuracy. Therefore, a delay correction function using bidirectional sweeping of the wavelength-swept laser is used. The wavelength-swept laser using Fourier domain mode locking (FDML) is driven at a sweep frequency of 50.7 kHz with a sweep bandwidth of ∼60 nm. This study demonstrates that pulse-modulated FDML laser can automatically recognize reflection signals from multiple FBGs installed at arbitrary long distances. When the recognition process is complete, the interrogation system can perform real-time measurement with a time resolution of 9.9 ls, without being affected by delay that occurs when installing at a long distance.


  • Open Access

    Field-Programmable Gate Array-Based Multichannel Measurement System for Interrogating Fiber Bragg Grating Sensors

    by Tatsuya Yamaguchi, Keisuke Ishihara, Yukitaka Shinoda

    We develop a field-programmable gate array (FPGA)-based multichannel measurement system for sensing multiplexed fiber Bragg gratings (FBGs), using a high–speed wavelength–swept laser. The wavelength-swept laser, operated with Fourier-domain mode locking (FDML), exhibits a sweep frequency of 50.7 kHz and sweep band of ~60 nm. A breakthrough in multichannel and real-time measurement is achieved by implementing an FPGA with unique parallel-processing circuits. This FPGA enables the implementation of a high-speed centroid-peak–detection circuit for FBG detection, which can be operated with a sampling frequency of 250 MHz. In multichannel measurement systems, the light propagating through each sensor path produces a delay, which reduces the measurement accuracy. This can be solved by implementing a delay-correction technique, which utilizes the time difference between two spectra obtained by a bidirectional scan of the FDML laser. The system is demonstrated to exhibit multichannel sensing and high measurement time resolution of 9.9 μs, without being affected by the delay.


  • Multichannel High-Speed Fiber Bragg Grating Interrogation System Utilizing a Field Programmable Gate Array

    by Tatsuya Yamaguchi, Yukitaka Shinoda

    We demonstrate a multi-channel high-speed fiber Bragg grating (FBG) interrogation system utilizing a field programmable gate array (FPGA). A temperature-controlled Fourier domain mode locking (TC-FDML) laser was operated with a sweep rate of 50.7 kHz, sweep bands of 35 nm, and an output power of 0.91 mW. This laser enabled a FBG measurement speed of up to 9.9 $\mu$s. Real-time processing could be achieved by incorporating a high-speed data acquisition system (DAQ) mounted an analog to digital converter and an FPGA. The DAQ performed in-line processing with four 14-bit analog channels and a sampling frequency of 250 MHz. The internals of the FPGAs were implemented parallel processing for high-speed FBG detection, to allow for the simultaneous measurement of the multiplexed FBG in three channels. We demonstrated that this system is capable of high-speed vibration measurements above several tens of kHz with a multi-channel.


  • Open Access

    Construction of Reflection Wavelength Measurement System of Fiber Bragg Gratings Using Database

    by Tatsuya Yamaguchi, Yukitaka Shinoda

    The objective of this research is the construction of a high-speed and long-time strain measurement system that uses fiber Bragg grating (FBG) for determining health of structures. We constructed a high-speed and long-time measurement system that was accomplished by combining a FBG measurement system using wavelength swept laser and a data management system using database. This FBG measurement system was able to drive wavelength swept laser with sweep frequency of 20kHz and had a temporal resolution of 50µs. The data management system could manage the large volume of the data obtained from high-speed measurement. In this paper, we report on high-speed and long-time measurement for detecting instantaneous strain over 12 hours.