TYTatsuya Yamaguchi

Tatsuya Yamaguchi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tatsuya Yamaguchi has a total of 14 co-authors. Here are the top co-authors by number of shared publications:

  • Yukitaka Shinoda

    Nihon University

    10 shared publications
  • Yukitaka Shinoda

    Nihon University, College of Science and Technology, Department of Electrical Engineering, Tokyo, Japan

    6 shared publications
  • Hiroki Matsuda

    Nihon University, Graduate School of Science and Technology, Department of Electrical Engineering, Tokyo, Japan

    4 shared publications
  • Hiroto Kawashima

    Nihon University, Graduate School of Science and Technology, Department of Electrical Engineering, Tokyo, Japan

    4 shared publications
  • Wataru Endo

    Graduate School of Science and Technology, Nihon University, Tokyo, Japan

    3 shared publications
  • Akira Nakamoto

    Nihon University, Graduate School of Science and Technology, Department of Electrical Engineering, Tokyo, Japan

    2 shared publications

Latest Publications

  • Open Access

    Selective multipoint interrogation of identical-wavelength fiber Bragg gratings by sweep frequency control in sigma-configured Fourier-domain mode-locked laser

    by Tatsuya Yamaguchi, Hiroki Matsuda, Hiroto Kawashima, Yukitaka Shinoda

    Fiber Bragg gratings (FBGs) have become indispensable elements in optical fiber sensors. We demonstrate a selective multipoint interrogation method for identical-wavelength FBGs based on a sigma-configured Fourier-domain mode-locked (FDML) laser. Unlike conventional wavelength-division multiplexing (WDM) systems with constrained spectral bandwidth, the proposed method leverages cavity-length-dependent sweep periods to achieve spatial discrimination of identical-wavelength FBGs without requiring additional optical hardware. The sigma configuration incorporates multiple optical paths within the FDML resonator, with each path having a distinct round-trip time, which enables selective FBG detection by simply tuning the sweep period of the integrated tunable optical filter. Experimental validation on six FBGs demonstrates distance switching below 10 ms, wavelength resolution of approximately 6 pm, and temporal resolution of approximately 20 μs, potentially doubling the sensing capacity of WDM under the same spectral range. Overall, the proposed method addresses the intrinsic multipoint limitation of WDM and provides a compact and flexible solution for high-speed, high-resolution, and dense distributed sensing, with potential applications in structural health monitoring, aerospace instrumentation, and dynamic strain/vibration analysis.

  • Open Access

    Fiber Bragg Grating Interrogation System Combining Wavelength-Swept Laser and Convolutional Neural Network

    by Tatsuya Yamaguchi, Hiroto Kawashima, Hiroki Matsuda, Yukitaka Shinoda

    We propose a novel deep learning approach to improve the multipoint performance of fiber Bragg grating (FBG) interrogation systems with high-speed wavelength-swept lasers. Because conventional interrogation systems use wavelength-division multiplexing for multipointing FBGs, the number of FBGs is limited by the wavelength bandwidth of the light source. To overcome this, we attempted to improve the multipoint performance of wavelength-division multiplexing by using multiple FBGs of the same wavelength. However, it is difficult to analyze the peak wavelengths of individual FBGs using a high-speed wavelength-swept laser because the optical spectra of FBGs at the same wavelength are observed to occur in a complex overlapping manner on the microsecond order. Here, we present a peak-detection method based on a convolutional neural network (CNN) in deep learning as a breakthrough in solving this problem. The experiment combines a high-speed wavelength-swept laser and a CNN to achieve high-speed measurement of three overlapping FBGs at the same wavelength. The results demonstrate that a measurement rate of 50 kHz and a wavelength resolution of 4.2 pm can be achieved, improving the limit of wavelength-division multiplexing by a factor of three. Our approach is to simply incorporate peak detection with CNN into existing wavelength-swept laser-based interrogators, which can function as if they were interrogators with several times the multipoint performance.


  • Open Access

    Experimental Demonstration of Peak Wavelength Measurement of Multiplexing Fiber Bragg Gratings Using Convolutional Neural Network

    by Tatsuya Yamaguchi, Hiroto Kawashima, Hiroki Matsuda, Yukitaka Shinoda

    We propose a peak detection method for measuring fiber Bragg gratings (FBGs) using convolutional neural network (CNN) to improve the performances of wavelength division multiplexing. In wavelength division multiplexing, each FBG occupies a certain wavelength range; therefore, the number of FBGs that can be installed is limited by the wavelength band of the light source. To address this issue, methods for overlapping multiple FBGs of the same wavelength within a single occupied wavelength range have been studied. This contributes to improving the limit of multipoint FBGs manifold. However, this method results in the complex overlapping of multiple FBG reflectance spectra making it difficult to accurately measure the peak wavelengths of individual FBGs using conventional peak detection methods. Therefore, we developed a peak detection process using CNN, which is suitable for identifying unique feature data. Each FBG of the same wavelength was characterized to have a unique spectral shape by assigning a different full width at half maximum to each. We introduced noise-additive learning, a well-known method of data augmentation that increases tolerance to variations in the experimental signal. As a result, the standard deviation for peak wavelength detection significantly improved to 2.8 pm and the strain measurements with three complex overlapping FBGs were successfully demonstrated. The CNN model is the first to solve the problem of three overlapping FBGs for arbitrary wavelength changes. Furthermore, the developed peak detection process was found to be applicable to measurements that combined multiplexing of FBGs of either identical or different wavelengths.


  • Open Access

    Consideration of spectroscopic measurements with broadband Fourier domain mode-locked laser with two semiconductor optical amplifiers at ∼1550 nm

    by Tatsuya Yamaguchi, Akira Nakamoto, Yukitaka Shinoda

    In this study, an experimental system was developed using a broadband wavelength-swept laser for fast and broadband spectroscopic measurements at ∼1550 nm. The broadband wavelength-swept laser employed Fourier domain mode-locking (FDML) to realize a high-speed sweep rate of 50.7 kHz. FDML lasers at ∼1550 nm experience a problem of the sweep bandwidth being limited by the amplification wavelength range of the semiconductor optical amplifier (SOA). To realize a sweep bandwidth >100 nm, the proposed broadband FDML laser incorporated SOAs with different amplification wavelength ranges in parallel. Consequently, it expanded the sweep bandwidth to 120 nm at a center wavelength of 1544 nm. The experimental system employed the broadband FDML laser and introduced reference and compensation optics. These optics can compensate for the effects of fluctuations in optical output intensity and wavelength shift in the laser to improve measurement stability. Moreover, the experimental system demonstrated fast transmission spectrum measurements with a wavelength range of 1500 to 1580 nm.


  • Improvement of Multiplexing Capability of Fiber Bragg Gratings Using Convolutional Neural Network

    by Tatsuya Yamaguchi, Hiroto Kawashima, Hiroki Matsuda, Yukitaka Shinoda

    A method for improving the multiplexing capability of fiber Bragg gratings (FBGs) based on wavelength division multiplexing by a convolutional neural network (CNN) is developed. Using the devised CNN model, the direct analysis of the peak wavelengths of the arbitrary strain responses of four overlapping FBGs at the same wavelength without the support of special optical devices is demonstrated for the first time. The standard deviation of the measurement resolution is < 2.8 pm.


  • Open Access

    Real-time measurement system for overlapping reflection signals of fiber Bragg gratings using high-speed wavelength-swept laser

    by Tatsuya Yamaguchi, Akira Nakamoto, Yukitaka Shinoda

    We propose a real-time measurement system that prevents overlapping reflection signals in fiber Bragg gratings (FBGs). The system combines a wavelength-swept laser using Fourier domain mode-locking (FDML) and a buffer stage with three optical paths to obtain a high-speed measurement rate of 304.2 kHz. Systems using high-speed wavelength-swept lasers are affected by the propagation time (delay) of the optical fiber. The delay causes problems such as inaccurate measurements, difficulty in distinguishing FBG reflection signals, and overlapping FBG reflection signals. To prevent these problems, we introduce a method for pulse modulation of a wavelength-swept laser by a fiber switch. This method allows for correction of delays by extracting and identifying only the reflection signal of the FBG at a specific wavelength. By identifying the reflection signals of all FBGs, the overlapping signals can be determined. Accordingly, we devise a measurement method that uses a fiber switch to shade light in the wavelength region of one FBG with overlapping signals from the wavelength-swept light of the laser. This method suppresses overlapping and allows only the reflection signal of the other FBGs to be extracted and demodulated. The proposed system uses bidirectional forward and backward scans with the wavelength-swept laser, such that the shaded FBG signals can be demodulated with either scanning direction. We demonstrate that the system using a three-buffered FDML laser can simultaneously measure the strain or vibration of FBGs installed at arbitrary distances.


  • Open Access

    Real-Time Spectroscopy System for Continuous Measurement With Fourier-Domain Mode-Locked Laser at 1550 nm

    by Tatsuya Yamaguchi, Wataru Endo, Yukitaka Shinoda

    We developed a real-time spectroscopy system for continuous measurement using a Fourier-domain mode-locked (FDML) laser. The FDML laser was driven at a sweep rate of 50 kHz in the near-infrared region of 1550 nm. To achieve robust real-time measurement, the spectroscopy system properly designs the pulse modulation of the FDML laser and the length of the reference optical path. The intensity fluctuation of the FDML laser was corrected by introducing a reference optical path. We demonstrated that the spectroscopy system performs continuous measurements for 1 min or more with a time resolution of 20 μs.


  • Open Access

    High-Speed Interrogation System for Fiber Bragg Gratings With Buffered Fourier Domain Mode-Locked Laser

    by Tatsuya Yamaguchi, Wataru Endo, Yukitaka Shinoda

    We develop a high-speed interrogation system with a wavelength-swept laser for sensing multiplexed fiber Bragg gratings (FBGs). High-speed and multipoint sensing is achieved by means of a buffered Fourier domain mode-locked (FDML) laser, a recently proposed high-speed wavelength-swept laser. This laser increases the measurement rate several times by tailoring the laser output with a buffer stage. The developed buffered FDML laser successfully achieves a measurement rate of 202.8 kHz using a general FDML laser driven at a sweep rate of 50.7 kHz. In order to detect reflection signals of FBGs at the high measurement rate, the measurement system introduces digital signal processing using a field programmable gate array (FPGA). However, FBG measurements with wavelength-swept lasers are affected by the propagation time (delay) in the optical fiber connecting from the laser to the FBG sensor, which reduces measurement accuracy. To overcome this limitation, the developed system uses a delay correction method with bidirectional sweep of the buffered FDML laser. The interrogation system with the buffered FDML laser achieves a time resolution of 4.9 μs without being affected by the delay.