Juan Felipe Montoya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Juan Felipe Montoya has a total of 141 co-authors. Here are the top co-authors by number of shared publications:
- Franklin Jaramillo
Center for Research Innovation and Development of Materials–CIDEMAT Faculty of Engineering University of Antioquia–UdeA Medellín Colombia
15 shared publications - Daniel Ramirez
Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia UdeA, Medellín, Colombia
13 shared publications - Juan José Patiño
Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia UdeA, Medellín, Colombia
7 shared publications - Carlos Andrés Velásquez Marquez
Centro de Investigación, Innovación y Desarrollo de Materiales (CIDEMAT), Departamento de Ingeniería de Materiales, Facultad de Ingeniería, Universidad de Antioquia UdeA 1 , Calle 70 No. 52-21, 050010 Medellín
5 shared publications - Rafael Betancur
ICFO – The Institute of Photonic Sciences Mediterranean Technology Park Castelldefels (Barcelona) 08860 Spain
5 shared publications - John Ciro
Centro de Investigación, Innovación y Desarrollo de Materiales—CIDEMAT, Facultad de Ingeniería, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín, Colombia
4 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by AIP Publishing in APL Materials
- Vol. 14 (10)
Halide perovskite photoelectrodes for solar water splitting: Advances and stability challenges
Photoelectrochemical water splitting has emerged as one of the most promising strategies for direct production of green hydrogen, an energy carrier with high energy density and zero carbon emissions. Among recent developments, halide perovskite semiconductors have attracted significant attention due to their outstanding optoelectronic properties, including strong light absorption, high charge carrier mobility, and tunable bandgaps. The integration of halide perovskites as light-absorbing layers in synergy with charge transport, protective, and catalytic layers into photoelectrode architectures has yielded promising scalability, high photocurrent densities, and extended operational stability. This review examines the role of each material that constitutes photoelectrodes based on halide perovskites and summarizes key evaluation parameters, namely photocurrent density, overpotential, and operational stability. In addition, a framework for conducting the electrochemical characterization of the devices is discussed, and key strategies commonly employed for selecting materials that reach high photocurrent densities and extended operational stability are outlined. Although performance metrics are extracted at thermodynamic potentials of oxygen (1.23 V) and hydrogen (0 V) evolution reactions, stability studies show that even small deviations in applied bias accelerate degradation processes, such as hydration, halide migration, and interfacial corrosion. As a result, current tests duration typically ranging from minutes to hundreds of hours remain as the main bottleneck, outweighing the already demonstrated high photocurrents and efficiencies. Key challenges include photocurrent retention, chemical and structural stability under prolonged operation, and the need for more robust transport layers and encapsulation strategies capable of mitigating degradation mechanisms induced by voltage, light, as well as water contact.
- 1 October 2026
- Published by AIP Publishing in APL Materials
- Vol. 14 (10)
Open AccessHalide perovskite photoelectrodes for solar water splitting: Advances and stability challenges
Photoelectrochemical water splitting has emerged as one of the most promising strategies for direct production of green hydrogen, an energy carrier with high energy density and zero carbon emissions. Among recent developments, halide perovskite semiconductors have attracted significant attention due to their outstanding optoelectronic properties, including strong light absorption, high charge carrier mobility, and tunable bandgaps. The integration of halide perovskites as light-absorbing layers in synergy with charge transport, protective, and catalytic layers into photoelectrode architectures has yielded promising scalability, high photocurrent densities, and extended operational stability. This review examines the role of each material that constitutes photoelectrodes based on halide perovskites and summarizes key evaluation parameters, namely photocurrent density, overpotential, and operational stability. In addition, a framework for conducting the electrochemical characterization of the devices is discussed, and key strategies commonly employed for selecting materials that reach high photocurrent densities and extended operational stability are outlined. Although performance metrics are extracted at thermodynamic potentials of oxygen (1.23 V) and hydrogen (0 V) evolution reactions, stability studies show that even small deviations in applied bias accelerate degradation processes, such as hydration, halide migration, and interfacial corrosion. As a result, current tests duration typically ranging from minutes to hundreds of hours remain as the main bottleneck, outweighing the already demonstrated high photocurrents and efficiencies. Key challenges include photocurrent retention, chemical and structural stability under prolonged operation, and the need for more robust transport layers and encapsulation strategies capable of mitigating degradation mechanisms induced by voltage, light, as well as water contact.
- 8 April 2026
- Published by AIP Publishing in APL Energy
- Vol. 4 (2)
Special topic on Applied Energy in Latin America
This Special Topic in APL Energy highlights recent advances in applied energy research across Latin America, focusing on materials and technologies that support the regional energy transition. The collection showcases developments in organic and perovskite photovoltaics, perovskite quantum dots, photocatalysis, and photoelectrochemical hydrogen production, including both fundamental studies and prototype-level innovations. Together, these contributions, along with the vast renewable energy potential that Latin America possesses, demonstrate the region’s growing capacity for scientific innovation, interdisciplinary collaboration, and technology development tailored to local resources and challenges, reinforcing Latin America’s role in shaping sustainable, low-carbon energy solutions.
- 8 April 2026
- Published by AIP Publishing in APL Energy
- Vol. 4 (2)
Special topic on Applied Energy in Latin America
This Special Topic in APL Energy highlights recent advances in applied energy research across Latin America, focusing on materials and technologies that support the regional energy transition. The collection showcases developments in organic and perovskite photovoltaics, perovskite quantum dots, photocatalysis, and photoelectrochemical hydrogen production, including both fundamental studies and prototype-level innovations. Together, these contributions, along with the vast renewable energy potential that Latin America possesses, demonstrate the region’s growing capacity for scientific innovation, interdisciplinary collaboration, and technology development tailored to local resources and challenges, reinforcing Latin America’s role in shaping sustainable, low-carbon energy solutions.
- Top Cited PapersOpen Access
- 18 March 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 55 (8) , 4648-4706
The long road to outdoor stability: real-world challenges for controlling perovskite materials for solar cells
Perovskite photovoltaics have demonstrated impressive performance in controlled laboratory tests, with power conversion efficiencies as high as 27%, positioning them as promising alternatives to conventional silicon-based solar cells for various applications. However, despite these major advances, operational stability remains a limiting factor for commercial applications. Large-scale implementation requires addressing challenges such as susceptibility to environmental stressors and the need for long-term outdoor stability, which few standardized outdoor testing studies and publications have accurately assessed. In this review, it is suggested that several stressors, such as temperature and irradiance fluctuations, UV-light, humidity, and precipitation have a significant relevance on the long-term stability. The main degradation reactions initiated by these stressors are reviewed for different compositions of perovskite absorbers and charge transport layers. Furthermore, we reviewed recent in situ and/or in operando studies of perovskite materials and devices under controlled conditions, which intend to elucidate reaction mechanisms and/or interactions among the device's layers in state-of-the-art perovskite compositions, which pave the way for a more rational design of stable devices and highlight the importance of developing in situ or in operando studies for each perovskite composition interacting with other materials within the cell stack. For controlling perovskite solar cells (PSCs) and improving outdoor stability, we emphasize strategies such as bulk modifications, interface engineering, and back electrode design, and discuss each specific strategy used in the literature that has been proved in outdoor conditions and its direct effect on device real-world stability. Moreover, additional strategies such as optimized interconnection layouts, protective functional layers, and advanced encapsulation materials are discussed. Additionally, in this work, an assessment of different measurement approaches aligned with international standards such as IEC 61215 and ISOS was carried out across different climate zones. Our analysis reveals a predominant focus on temperate climates in outdoor testing, along with growing interest in correlating indoor accelerated aging data with measured outdoor performance. In particular, tropical climates, with consistently high humidity, temperature, and solar radiation, provide an ideal setting for exhaustive and accelerated stability tests to evaluate strategies for improving perovskite devices. This review also emphasizes the need for expanding outdoor testing in diverse climates, particularly those enabling rapid feedback and decision-making, as a critical step towards ensuring PSC stability and commercial viability.
- 18 March 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 55 (8) , 4648-4706
Top Cited PapersOpen AccessThe long road to outdoor stability: real-world challenges for controlling perovskite materials for solar cells
Perovskite photovoltaics have demonstrated impressive performance in controlled laboratory tests, with power conversion efficiencies as high as 27%, positioning them as promising alternatives to conventional silicon-based solar cells for various applications. However, despite these major advances, operational stability remains a limiting factor for commercial applications. Large-scale implementation requires addressing challenges such as susceptibility to environmental stressors and the need for long-term outdoor stability, which few standardized outdoor testing studies and publications have accurately assessed. In this review, it is suggested that several stressors, such as temperature and irradiance fluctuations, UV-light, humidity, and precipitation have a significant relevance on the long-term stability. The main degradation reactions initiated by these stressors are reviewed for different compositions of perovskite absorbers and charge transport layers. Furthermore, we reviewed recent in situ and/or in operando studies of perovskite materials and devices under controlled conditions, which intend to elucidate reaction mechanisms and/or interactions among the device's layers in state-of-the-art perovskite compositions, which pave the way for a more rational design of stable devices and highlight the importance of developing in situ or in operando studies for each perovskite composition interacting with other materials within the cell stack. For controlling perovskite solar cells (PSCs) and improving outdoor stability, we emphasize strategies such as bulk modifications, interface engineering, and back electrode design, and discuss each specific strategy used in the literature that has been proved in outdoor conditions and its direct effect on device real-world stability. Moreover, additional strategies such as optimized interconnection layouts, protective functional layers, and advanced encapsulation materials are discussed. Additionally, in this work, an assessment of different measurement approaches aligned with international standards such as IEC 61215 and ISOS was carried out across different climate zones. Our analysis reveals a predominant focus on temperate climates in outdoor testing, along with growing interest in correlating indoor accelerated aging data with measured outdoor performance. In particular, tropical climates, with consistently high humidity, temperature, and solar radiation, provide an ideal setting for exhaustive and accelerated stability tests to evaluate strategies for improving perovskite devices. This review also emphasizes the need for expanding outdoor testing in diverse climates, particularly those enabling rapid feedback and decision-making, as a critical step towards ensuring PSC stability and commercial viability.
- Open Access
- 1 December 2025
- Published by AIP Publishing in APL Energy
- Vol. 3 (4)
Photoelectrosynthetic reactor for green hydrogen production
A photoelectrochemical reactor designed and fabricated from ABS using 3D printing with geometric simplicity and modular assembly is presented, which facilitates flexible scaling and easy adaptation to diverse experimental configurations. It is specifically intended for the evaluation of photoelectrodes aimed at green hydrogen production through water photoelectrolysis. The system displays a dual-compartment configuration separated by a gas-selective membrane, enabling precise characterization of PEC (photoelectrochemical cell) devices. The proof of concept demonstrates the functionality of reactor under laboratory conditions, reaching a current Technology Readiness Level (TRL) between 3 and 4, with ongoing development toward higher TRLs through materials optimization and extended stability testing. The reactor represents a promising approach due to its low cost, scalability, compact integration, and potential to enable future solar-powered hydrogen production. Its accessible design makes it particularly suitable for educational environments and training in solar fuel technologies. With a realistic pathway for scaling to higher TRLs, the system serves as a flexible platform for continued innovation. Furthermore, its compact and energy-efficient configuration positions it as a reliable candidate for future integration with autonomous solar setups, supporting decentralized hydrogen generation.
- 1 December 2025
- Published by AIP Publishing in APL Energy
- Vol. 3 (4)
Open AccessPhotoelectrosynthetic reactor for green hydrogen production
A photoelectrochemical reactor designed and fabricated from ABS using 3D printing with geometric simplicity and modular assembly is presented, which facilitates flexible scaling and easy adaptation to diverse experimental configurations. It is specifically intended for the evaluation of photoelectrodes aimed at green hydrogen production through water photoelectrolysis. The system displays a dual-compartment configuration separated by a gas-selective membrane, enabling precise characterization of PEC (photoelectrochemical cell) devices. The proof of concept demonstrates the functionality of reactor under laboratory conditions, reaching a current Technology Readiness Level (TRL) between 3 and 4, with ongoing development toward higher TRLs through materials optimization and extended stability testing. The reactor represents a promising approach due to its low cost, scalability, compact integration, and potential to enable future solar-powered hydrogen production. Its accessible design makes it particularly suitable for educational environments and training in solar fuel technologies. With a realistic pathway for scaling to higher TRLs, the system serves as a flexible platform for continued innovation. Furthermore, its compact and energy-efficient configuration positions it as a reliable candidate for future integration with autonomous solar setups, supporting decentralized hydrogen generation.
- Open Access
- 1 December 2025
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (3)
Insight‐Guided Optimization of the Individual Steps in Ambient Slot‐Die‐Coated Perovskite Solar Cells
Scalable fabrication of perovskite solar cells (PSCs) under ambient conditions remains a key challenge for transferring technology from the lab to industry. Herein, an insight‐guided optimization framework is presented that integrates ink rheology control, interfacial engineering, and crystallization management to achieve reproducible, high‐quality perovskite films via doctor‐blade and slot‐die coating. Hydroxypropyl cellulose is employed as a rheological additive to stabilize meniscus formation, suppress pinholes, and enhance film crystallinity. Charge extraction and interface uniformity are improved by introducing a mesoporous Al 2 O 3 scaffold on top of NiO x , which promotes perovskite infiltration and reduces interfacial defects. Finally, an air‐knife quenching step homogenizes solvent evaporation, yielding compact, large‐grained films with superior optoelectronic properties. Together, these strategies enable reproducible PSCs with uniform thickness (210–230 nm), improve fill factor and current density, and achieve efficiencies up to 17% on flexible substrates—all processed in ambient air. Beyond device improvements, the study establishes a methodology that couples rheological mapping with coating dynamics, offering transferable insights into the deposition–crystallization interplay essential for roll‐to‐roll scalable photovoltaics. This work demonstrates that combining polymer additives, mesoporous scaffolds, and quenching‐assisted drying provides a robust route toward ambient, manufacturable PSC technologies.
- 1 December 2025
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (3)
Open AccessInsight‐Guided Optimization of the Individual Steps in Ambient Slot‐Die‐Coated Perovskite Solar Cells
Scalable fabrication of perovskite solar cells (PSCs) under ambient conditions remains a key challenge for transferring technology from the lab to industry. Herein, an insight‐guided optimization framework is presented that integrates ink rheology control, interfacial engineering, and crystallization management to achieve reproducible, high‐quality perovskite films via doctor‐blade and slot‐die coating. Hydroxypropyl cellulose is employed as a rheological additive to stabilize meniscus formation, suppress pinholes, and enhance film crystallinity. Charge extraction and interface uniformity are improved by introducing a mesoporous Al 2 O 3 scaffold on top of NiO x , which promotes perovskite infiltration and reduces interfacial defects. Finally, an air‐knife quenching step homogenizes solvent evaporation, yielding compact, large‐grained films with superior optoelectronic properties. Together, these strategies enable reproducible PSCs with uniform thickness (210–230 nm), improve fill factor and current density, and achieve efficiencies up to 17% on flexible substrates—all processed in ambient air. Beyond device improvements, the study establishes a methodology that couples rheological mapping with coating dynamics, offering transferable insights into the deposition–crystallization interplay essential for roll‐to‐roll scalable photovoltaics. This work demonstrates that combining polymer additives, mesoporous scaffolds, and quenching‐assisted drying provides a robust route toward ambient, manufacturable PSC technologies.
- 7 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (46) , 22295-22307
Laser-Patterned Slot-Die Carbon Electrodes Functionalized with Gold Nanostars for the Electrochemical Detection of C-Reactive Protein
- 7 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (46) , 22295-22307
Laser-Patterned Slot-Die Carbon Electrodes Functionalized with Gold Nanostars for the Electrochemical Detection of C-Reactive Protein
- Open Access
Full‐Solution Processed Halide Perovskite Photoanodes with Carbon/NiFe‐LDH Protection for Efficient Photoelectrochemical Water Oxidation
The development of photoelectrochemical water oxidation (PEC) systems has gained significant relevance in recent years due to the quest for clean fuels, where green hydrogen is one of the main actors in the energy transition. Particularly, there has been a need for precious metal‐free electrodes and photoelectrodes that demonstrate high efficiency and stability aiming at having large‐scale and low‐cost green hydrogen production systems. This work shows advances toward this goal by using nonprecious catalysts and solution‐processed materials to achieve efficient, low‐cost, and stable photoelectrodes. Specifically, carbon‐based hybrid perovskite photoelectrodes coupled with an earth‐abundant Nickel‐Iron layered double hydroxide (NiFe‐LDH) catalyst (carbon/NiFe‐LDH) are fabricated and evaluated for oxygen evolution reaction (OER). Devices with an active area of 1.1 cm 2 exhibit evaluated over 12 h of continuous operation, a 4.57% ABPE at 0.64 V RHE , and a photocurrent density of 11.71 mA cm −2 at 1.23 V RHE . The incorporation of graphite tape results in a system (C/GT/NiFe‐LDH) that shows an exceptional operational stability over 125 h and efficiency for this type of photoelectrode with a high photocurrent density of 18.07 mA cm −2 at 1.23 V RHE and 8.51% ABPE at 0.67 V RHE .
Open AccessFull‐Solution Processed Halide Perovskite Photoanodes with Carbon/NiFe‐LDH Protection for Efficient Photoelectrochemical Water Oxidation
The development of photoelectrochemical water oxidation (PEC) systems has gained significant relevance in recent years due to the quest for clean fuels, where green hydrogen is one of the main actors in the energy transition. Particularly, there has been a need for precious metal‐free electrodes and photoelectrodes that demonstrate high efficiency and stability aiming at having large‐scale and low‐cost green hydrogen production systems. This work shows advances toward this goal by using nonprecious catalysts and solution‐processed materials to achieve efficient, low‐cost, and stable photoelectrodes. Specifically, carbon‐based hybrid perovskite photoelectrodes coupled with an earth‐abundant Nickel‐Iron layered double hydroxide (NiFe‐LDH) catalyst (carbon/NiFe‐LDH) are fabricated and evaluated for oxygen evolution reaction (OER). Devices with an active area of 1.1 cm 2 exhibit evaluated over 12 h of continuous operation, a 4.57% ABPE at 0.64 V RHE , and a photocurrent density of 11.71 mA cm −2 at 1.23 V RHE . The incorporation of graphite tape results in a system (C/GT/NiFe‐LDH) that shows an exceptional operational stability over 125 h and efficiency for this type of photoelectrode with a high photocurrent density of 18.07 mA cm −2 at 1.23 V RHE and 8.51% ABPE at 0.67 V RHE .
- 9 April 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (10) , 2753-2768
Evaluation of environmental impacts of a perovskite solar cell with a p-i-n meso -superstructured architecture through life cycle assessment
This study analyzes the environmental impacts of a 1 cm 2 perovskite solar cell (PSC) with a meso -superstructured p-i-n configuration, fabricated in Colombia.
- 9 April 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (10) , 2753-2768
Evaluation of environmental impacts of a perovskite solar cell with a p-i-n meso -superstructured architecture through life cycle assessment
This study analyzes the environmental impacts of a 1 cm 2 perovskite solar cell (PSC) with a meso -superstructured p-i-n configuration, fabricated in Colombia.
- 2 October 2024
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (1)
Flexible PET/Carbon/NiFe‐LDH Electrode for Oxygen Evolution Reaction in Water‐Splitting
The development of low‐cost, readily scalable catalytic systems for green hydrogen production is crucial for diverse research and industrial applications. This work demonstrates the facile coupling of carbon/NiFe‐layered double hydroxide (LDH) onto flexible polyethylene terephthalate (PET) substrates deposited by blade coating and spray coating techniques. These low‐temperature solution processes enable high‐throughput electrode fabrication. The resulting carbon electrode exhibits sheet resistance of 25 Ω sq −1 , comparable to other state‐of‐the‐art works, and displays excellent adhesion to the substrate and catalyst layer, thereby ensuring system stability. Remarkably, the developed electrode exhibits high catalytic activity for the oxygen evolution reaction (OER), achieving an overpotential of 215.9 and 267.4 mV at 10 mA cm − 2 in rigid and flexible substrates respectively, and maintaining its performance even at 10 mA cm − 2 for 24 h. This work highlights the potential of this methodology for producing readily transportable, flexible electrocatalytic systems with exceptional performance and minimal surface treatment of the substrate. Additionally, the use of low‐cost, readily recyclable PET plastic aligns with the principles of circular economy, promoting the integration of this platform into both research and industrial environments.
- 2 October 2024
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (1)
Flexible PET/Carbon/NiFe‐LDH Electrode for Oxygen Evolution Reaction in Water‐Splitting
The development of low‐cost, readily scalable catalytic systems for green hydrogen production is crucial for diverse research and industrial applications. This work demonstrates the facile coupling of carbon/NiFe‐layered double hydroxide (LDH) onto flexible polyethylene terephthalate (PET) substrates deposited by blade coating and spray coating techniques. These low‐temperature solution processes enable high‐throughput electrode fabrication. The resulting carbon electrode exhibits sheet resistance of 25 Ω sq −1 , comparable to other state‐of‐the‐art works, and displays excellent adhesion to the substrate and catalyst layer, thereby ensuring system stability. Remarkably, the developed electrode exhibits high catalytic activity for the oxygen evolution reaction (OER), achieving an overpotential of 215.9 and 267.4 mV at 10 mA cm − 2 in rigid and flexible substrates respectively, and maintaining its performance even at 10 mA cm − 2 for 24 h. This work highlights the potential of this methodology for producing readily transportable, flexible electrocatalytic systems with exceptional performance and minimal surface treatment of the substrate. Additionally, the use of low‐cost, readily recyclable PET plastic aligns with the principles of circular economy, promoting the integration of this platform into both research and industrial environments.
- Open Access
Renewable Energy Sources for Green Hydrogen Generation in Colombia and Applicable Case of Studies
Electrification using renewable energy sources represents a clear path toward solving the current global energy crisis. In Colombia, this challenge also involves the diversification of the electrical energy sources to overcome the historical dependence on hydropower. In this context, green hydrogen represents a key energy carrier enabling the storage of renewable energy as well as directly powering industrial and transportation sectors. This work explores the realistic potential of the main renewable energy sources, including solar photovoltaics (8172 GW), hydropower (56 GW), wind (68 GW), and biomass (14 GW). In addition, a case study from abroad is presented, demonstrating the feasibility of using each type of renewable energy to generate green hydrogen in the country. At the end, an analysis of the most likely regions in the country and paths to deploy green hydrogen projects are presented, favoring hydropower in the short term and solar in the long run. By 2050, this energy potential will enable reaching a levelized cost of hydrogen (LCOH) of 1.7, 1.5, 3.1 and 1.4 USD/kg-H2 for solar photovoltaic, wind, hydropower and biomass, respectively.
Open AccessRenewable Energy Sources for Green Hydrogen Generation in Colombia and Applicable Case of Studies
Electrification using renewable energy sources represents a clear path toward solving the current global energy crisis. In Colombia, this challenge also involves the diversification of the electrical energy sources to overcome the historical dependence on hydropower. In this context, green hydrogen represents a key energy carrier enabling the storage of renewable energy as well as directly powering industrial and transportation sectors. This work explores the realistic potential of the main renewable energy sources, including solar photovoltaics (8172 GW), hydropower (56 GW), wind (68 GW), and biomass (14 GW). In addition, a case study from abroad is presented, demonstrating the feasibility of using each type of renewable energy to generate green hydrogen in the country. At the end, an analysis of the most likely regions in the country and paths to deploy green hydrogen projects are presented, favoring hydropower in the short term and solar in the long run. By 2050, this energy potential will enable reaching a levelized cost of hydrogen (LCOH) of 1.7, 1.5, 3.1 and 1.4 USD/kg-H2 for solar photovoltaic, wind, hydropower and biomass, respectively.