Carlos Andrés Velásquez Marquez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Carlos Andrés Velásquez Marquez has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Ramirez
Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia UdeA, Medellín, Colombia
5 shared publications - Juan Felipe Montoya
Centro de Investigación, Innovación y Desarrollo de Materiales (CIDEMAT), Departamento de Ingeniería de Materiales, Facultad de Ingeniería, Universidad de Antioquia UdeA 3 , Calle 70 No. 52-21 (050010), Medellín
5 shared publications - Franklin Jaramillo
Center for Research Innovation and Development of Materials–CIDEMAT Faculty of Engineering University of Antioquia–UdeA Medellín Colombia
4 shared publications - Juan José Patiño
Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia UdeA, Medellín, Colombia
4 shared publications - Kevin Ballestas
Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia UdeA, Medellín, Colombia
3 shared publications - Ana Elizabeth Torres
Micro and Nanotechnologies, Instituto de Ciencias Aplicadas y Tecnología, Universidad Nacional Autónoma de Mexico, CU, Coyoacán, 04510, Mexico City, Mexico
1 shared publication
Latest Publications
- Open Access
- 1 October 2026
- Published by AIP Publishing in APL Materials
- Vol. 14 (10)
Halide perovskite photoelectrodes for solar water splitting: Advances and stability challenges
Photoelectrochemical water splitting has emerged as one of the most promising strategies for direct production of green hydrogen, an energy carrier with high energy density and zero carbon emissions. Among recent developments, halide perovskite semiconductors have attracted significant attention due to their outstanding optoelectronic properties, including strong light absorption, high charge carrier mobility, and tunable bandgaps. The integration of halide perovskites as light-absorbing layers in synergy with charge transport, protective, and catalytic layers into photoelectrode architectures has yielded promising scalability, high photocurrent densities, and extended operational stability. This review examines the role of each material that constitutes photoelectrodes based on halide perovskites and summarizes key evaluation parameters, namely photocurrent density, overpotential, and operational stability. In addition, a framework for conducting the electrochemical characterization of the devices is discussed, and key strategies commonly employed for selecting materials that reach high photocurrent densities and extended operational stability are outlined. Although performance metrics are extracted at thermodynamic potentials of oxygen (1.23 V) and hydrogen (0 V) evolution reactions, stability studies show that even small deviations in applied bias accelerate degradation processes, such as hydration, halide migration, and interfacial corrosion. As a result, current tests duration typically ranging from minutes to hundreds of hours remain as the main bottleneck, outweighing the already demonstrated high photocurrents and efficiencies. Key challenges include photocurrent retention, chemical and structural stability under prolonged operation, and the need for more robust transport layers and encapsulation strategies capable of mitigating degradation mechanisms induced by voltage, light, as well as water contact.
- 1 October 2026
- Published by AIP Publishing in APL Materials
- Vol. 14 (10)
Open AccessHalide perovskite photoelectrodes for solar water splitting: Advances and stability challenges
Photoelectrochemical water splitting has emerged as one of the most promising strategies for direct production of green hydrogen, an energy carrier with high energy density and zero carbon emissions. Among recent developments, halide perovskite semiconductors have attracted significant attention due to their outstanding optoelectronic properties, including strong light absorption, high charge carrier mobility, and tunable bandgaps. The integration of halide perovskites as light-absorbing layers in synergy with charge transport, protective, and catalytic layers into photoelectrode architectures has yielded promising scalability, high photocurrent densities, and extended operational stability. This review examines the role of each material that constitutes photoelectrodes based on halide perovskites and summarizes key evaluation parameters, namely photocurrent density, overpotential, and operational stability. In addition, a framework for conducting the electrochemical characterization of the devices is discussed, and key strategies commonly employed for selecting materials that reach high photocurrent densities and extended operational stability are outlined. Although performance metrics are extracted at thermodynamic potentials of oxygen (1.23 V) and hydrogen (0 V) evolution reactions, stability studies show that even small deviations in applied bias accelerate degradation processes, such as hydration, halide migration, and interfacial corrosion. As a result, current tests duration typically ranging from minutes to hundreds of hours remain as the main bottleneck, outweighing the already demonstrated high photocurrents and efficiencies. Key challenges include photocurrent retention, chemical and structural stability under prolonged operation, and the need for more robust transport layers and encapsulation strategies capable of mitigating degradation mechanisms induced by voltage, light, as well as water contact.
- Open Access
- 1 December 2025
- Published by AIP Publishing in APL Energy
- Vol. 3 (4)
Photoelectrosynthetic reactor for green hydrogen production
A photoelectrochemical reactor designed and fabricated from ABS using 3D printing with geometric simplicity and modular assembly is presented, which facilitates flexible scaling and easy adaptation to diverse experimental configurations. It is specifically intended for the evaluation of photoelectrodes aimed at green hydrogen production through water photoelectrolysis. The system displays a dual-compartment configuration separated by a gas-selective membrane, enabling precise characterization of PEC (photoelectrochemical cell) devices. The proof of concept demonstrates the functionality of reactor under laboratory conditions, reaching a current Technology Readiness Level (TRL) between 3 and 4, with ongoing development toward higher TRLs through materials optimization and extended stability testing. The reactor represents a promising approach due to its low cost, scalability, compact integration, and potential to enable future solar-powered hydrogen production. Its accessible design makes it particularly suitable for educational environments and training in solar fuel technologies. With a realistic pathway for scaling to higher TRLs, the system serves as a flexible platform for continued innovation. Furthermore, its compact and energy-efficient configuration positions it as a reliable candidate for future integration with autonomous solar setups, supporting decentralized hydrogen generation.
- 1 December 2025
- Published by AIP Publishing in APL Energy
- Vol. 3 (4)
Open AccessPhotoelectrosynthetic reactor for green hydrogen production
A photoelectrochemical reactor designed and fabricated from ABS using 3D printing with geometric simplicity and modular assembly is presented, which facilitates flexible scaling and easy adaptation to diverse experimental configurations. It is specifically intended for the evaluation of photoelectrodes aimed at green hydrogen production through water photoelectrolysis. The system displays a dual-compartment configuration separated by a gas-selective membrane, enabling precise characterization of PEC (photoelectrochemical cell) devices. The proof of concept demonstrates the functionality of reactor under laboratory conditions, reaching a current Technology Readiness Level (TRL) between 3 and 4, with ongoing development toward higher TRLs through materials optimization and extended stability testing. The reactor represents a promising approach due to its low cost, scalability, compact integration, and potential to enable future solar-powered hydrogen production. Its accessible design makes it particularly suitable for educational environments and training in solar fuel technologies. With a realistic pathway for scaling to higher TRLs, the system serves as a flexible platform for continued innovation. Furthermore, its compact and energy-efficient configuration positions it as a reliable candidate for future integration with autonomous solar setups, supporting decentralized hydrogen generation.
- Open Access
Full‐Solution Processed Halide Perovskite Photoanodes with Carbon/NiFe‐LDH Protection for Efficient Photoelectrochemical Water Oxidation
The development of photoelectrochemical water oxidation (PEC) systems has gained significant relevance in recent years due to the quest for clean fuels, where green hydrogen is one of the main actors in the energy transition. Particularly, there has been a need for precious metal‐free electrodes and photoelectrodes that demonstrate high efficiency and stability aiming at having large‐scale and low‐cost green hydrogen production systems. This work shows advances toward this goal by using nonprecious catalysts and solution‐processed materials to achieve efficient, low‐cost, and stable photoelectrodes. Specifically, carbon‐based hybrid perovskite photoelectrodes coupled with an earth‐abundant Nickel‐Iron layered double hydroxide (NiFe‐LDH) catalyst (carbon/NiFe‐LDH) are fabricated and evaluated for oxygen evolution reaction (OER). Devices with an active area of 1.1 cm 2 exhibit evaluated over 12 h of continuous operation, a 4.57% ABPE at 0.64 V RHE , and a photocurrent density of 11.71 mA cm −2 at 1.23 V RHE . The incorporation of graphite tape results in a system (C/GT/NiFe‐LDH) that shows an exceptional operational stability over 125 h and efficiency for this type of photoelectrode with a high photocurrent density of 18.07 mA cm −2 at 1.23 V RHE and 8.51% ABPE at 0.67 V RHE .
Open AccessFull‐Solution Processed Halide Perovskite Photoanodes with Carbon/NiFe‐LDH Protection for Efficient Photoelectrochemical Water Oxidation
The development of photoelectrochemical water oxidation (PEC) systems has gained significant relevance in recent years due to the quest for clean fuels, where green hydrogen is one of the main actors in the energy transition. Particularly, there has been a need for precious metal‐free electrodes and photoelectrodes that demonstrate high efficiency and stability aiming at having large‐scale and low‐cost green hydrogen production systems. This work shows advances toward this goal by using nonprecious catalysts and solution‐processed materials to achieve efficient, low‐cost, and stable photoelectrodes. Specifically, carbon‐based hybrid perovskite photoelectrodes coupled with an earth‐abundant Nickel‐Iron layered double hydroxide (NiFe‐LDH) catalyst (carbon/NiFe‐LDH) are fabricated and evaluated for oxygen evolution reaction (OER). Devices with an active area of 1.1 cm 2 exhibit evaluated over 12 h of continuous operation, a 4.57% ABPE at 0.64 V RHE , and a photocurrent density of 11.71 mA cm −2 at 1.23 V RHE . The incorporation of graphite tape results in a system (C/GT/NiFe‐LDH) that shows an exceptional operational stability over 125 h and efficiency for this type of photoelectrode with a high photocurrent density of 18.07 mA cm −2 at 1.23 V RHE and 8.51% ABPE at 0.67 V RHE .
- 2 October 2024
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (1)
Flexible PET/Carbon/NiFe‐LDH Electrode for Oxygen Evolution Reaction in Water‐Splitting
The development of low‐cost, readily scalable catalytic systems for green hydrogen production is crucial for diverse research and industrial applications. This work demonstrates the facile coupling of carbon/NiFe‐layered double hydroxide (LDH) onto flexible polyethylene terephthalate (PET) substrates deposited by blade coating and spray coating techniques. These low‐temperature solution processes enable high‐throughput electrode fabrication. The resulting carbon electrode exhibits sheet resistance of 25 Ω sq −1 , comparable to other state‐of‐the‐art works, and displays excellent adhesion to the substrate and catalyst layer, thereby ensuring system stability. Remarkably, the developed electrode exhibits high catalytic activity for the oxygen evolution reaction (OER), achieving an overpotential of 215.9 and 267.4 mV at 10 mA cm − 2 in rigid and flexible substrates respectively, and maintaining its performance even at 10 mA cm − 2 for 24 h. This work highlights the potential of this methodology for producing readily transportable, flexible electrocatalytic systems with exceptional performance and minimal surface treatment of the substrate. Additionally, the use of low‐cost, readily recyclable PET plastic aligns with the principles of circular economy, promoting the integration of this platform into both research and industrial environments.
- 2 October 2024
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (1)
Flexible PET/Carbon/NiFe‐LDH Electrode for Oxygen Evolution Reaction in Water‐Splitting
The development of low‐cost, readily scalable catalytic systems for green hydrogen production is crucial for diverse research and industrial applications. This work demonstrates the facile coupling of carbon/NiFe‐layered double hydroxide (LDH) onto flexible polyethylene terephthalate (PET) substrates deposited by blade coating and spray coating techniques. These low‐temperature solution processes enable high‐throughput electrode fabrication. The resulting carbon electrode exhibits sheet resistance of 25 Ω sq −1 , comparable to other state‐of‐the‐art works, and displays excellent adhesion to the substrate and catalyst layer, thereby ensuring system stability. Remarkably, the developed electrode exhibits high catalytic activity for the oxygen evolution reaction (OER), achieving an overpotential of 215.9 and 267.4 mV at 10 mA cm − 2 in rigid and flexible substrates respectively, and maintaining its performance even at 10 mA cm − 2 for 24 h. This work highlights the potential of this methodology for producing readily transportable, flexible electrocatalytic systems with exceptional performance and minimal surface treatment of the substrate. Additionally, the use of low‐cost, readily recyclable PET plastic aligns with the principles of circular economy, promoting the integration of this platform into both research and industrial environments.
- Open Access
Renewable Energy Sources for Green Hydrogen Generation in Colombia and Applicable Case of Studies
Electrification using renewable energy sources represents a clear path toward solving the current global energy crisis. In Colombia, this challenge also involves the diversification of the electrical energy sources to overcome the historical dependence on hydropower. In this context, green hydrogen represents a key energy carrier enabling the storage of renewable energy as well as directly powering industrial and transportation sectors. This work explores the realistic potential of the main renewable energy sources, including solar photovoltaics (8172 GW), hydropower (56 GW), wind (68 GW), and biomass (14 GW). In addition, a case study from abroad is presented, demonstrating the feasibility of using each type of renewable energy to generate green hydrogen in the country. At the end, an analysis of the most likely regions in the country and paths to deploy green hydrogen projects are presented, favoring hydropower in the short term and solar in the long run. By 2050, this energy potential will enable reaching a levelized cost of hydrogen (LCOH) of 1.7, 1.5, 3.1 and 1.4 USD/kg-H2 for solar photovoltaic, wind, hydropower and biomass, respectively.
Open AccessRenewable Energy Sources for Green Hydrogen Generation in Colombia and Applicable Case of Studies
Electrification using renewable energy sources represents a clear path toward solving the current global energy crisis. In Colombia, this challenge also involves the diversification of the electrical energy sources to overcome the historical dependence on hydropower. In this context, green hydrogen represents a key energy carrier enabling the storage of renewable energy as well as directly powering industrial and transportation sectors. This work explores the realistic potential of the main renewable energy sources, including solar photovoltaics (8172 GW), hydropower (56 GW), wind (68 GW), and biomass (14 GW). In addition, a case study from abroad is presented, demonstrating the feasibility of using each type of renewable energy to generate green hydrogen in the country. At the end, an analysis of the most likely regions in the country and paths to deploy green hydrogen projects are presented, favoring hydropower in the short term and solar in the long run. By 2050, this energy potential will enable reaching a levelized cost of hydrogen (LCOH) of 1.7, 1.5, 3.1 and 1.4 USD/kg-H2 for solar photovoltaic, wind, hydropower and biomass, respectively.
- Open Access
- 1 January 2023
- Published by Universidad de Antioquia in Revista Facultad de Ingeniería Universidad de Antioquia
- No. 106,p. 94-102
Development of a flexible anode for lithium-ion batteries from electrospun carbon-magnetite composite microfibers
The development of a binder-free material is gaining ground as a flexible anode in lithium-ion batteries due to the higher specific capacity and possibilities of usage in portable appliances. In this work, magnetite nanoparticles (Fe3O4-NPs) were incorporated into carbon microfibers (CMFs) by electrospinning technique to improve the specific capacity of active material, retaining the high flexibility of the CMFs. The composite active material (CMFs-Fe3O4) was characterized by Raman spectroscopy, Thermogravimetric analyses (TGA), and transmission electron microscopy (TEM) to determine the composition, structure, and morphology of the composite. Electrochemical tests were done to evaluate the performance of the composite material as an anode in lithium-ion batteries. Fe3O4-NPs with particle sizes from 30 to 40 nm were incorporated into CMFs (800 nm), and the TEM images showed a homogeneous distribution of Fe3O4-NPs. The electrochemical tests evidenced that magnetite incorporation increases the specific capacity by 42% on the first cycle and 20% on the 50th cycle. Similarly, the Coulombic efficiency increases by 20% in the composite material.
- 1 January 2023
- Published by Universidad de Antioquia in Revista Facultad de Ingeniería Universidad de Antioquia
- No. 106,p. 94-102
Open AccessDevelopment of a flexible anode for lithium-ion batteries from electrospun carbon-magnetite composite microfibers
The development of a binder-free material is gaining ground as a flexible anode in lithium-ion batteries due to the higher specific capacity and possibilities of usage in portable appliances. In this work, magnetite nanoparticles (Fe3O4-NPs) were incorporated into carbon microfibers (CMFs) by electrospinning technique to improve the specific capacity of active material, retaining the high flexibility of the CMFs. The composite active material (CMFs-Fe3O4) was characterized by Raman spectroscopy, Thermogravimetric analyses (TGA), and transmission electron microscopy (TEM) to determine the composition, structure, and morphology of the composite. Electrochemical tests were done to evaluate the performance of the composite material as an anode in lithium-ion batteries. Fe3O4-NPs with particle sizes from 30 to 40 nm were incorporated into CMFs (800 nm), and the TEM images showed a homogeneous distribution of Fe3O4-NPs. The electrochemical tests evidenced that magnetite incorporation increases the specific capacity by 42% on the first cycle and 20% on the 50th cycle. Similarly, the Coulombic efficiency increases by 20% in the composite material.
- 3 January 2021
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 27 (1) , 1-8
Role of the base Cs2CO3 on the palladium-catalyzed intramolecular cyclization of two bromoindole derivatives to yield paullone-type products
Reactions for the palladium-catalyzed intramolecular cyclization of the o-bromoindole and the o-bromo-N-methyl-indole derivatives in the presence and absence of base (Cs2CO3) were explored through DFT calculations. For the base-free reactions, the palladium atom firstly interacts with the aromatic rings of the indole molecule to yield a stable adduct. Once this adduct has been formed, reaction proceeds readily to the oxidative addition intermediate that arises from the insertion of the metal atom into the C–Br bond of the organic fragment. Further steps leading to the paullone (or dimethyl paullone) product, mainly those involving the metalation and deprotonation of the inserted intermediate, are not energetically viable for these reactions. When the effect of the base on the metalation-deprotonation steps is modeled by replacing the bromide ion with CO32− in the metal-inserted structure, a feasible pathway connecting the oxidative addition intermediate with the paullone-type product was located for each of the investigated reactions. The results emerging from this study suggest that palladium can insert into the C–Br bond of the indole derivatives to yield the oxidative addition intermediate (without participation of the base). However, the metalation and deprotonation steps that evolve to the paullone-type product take place via a concerted action involving both the metal and the base. Graphical abstract Metalation and deprotonation steps that evolve to the paullone-type product take place via a concerted action involving both the metal and the base.
- 3 January 2021
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 27 (1) , 1-8
Role of the base Cs2CO3 on the palladium-catalyzed intramolecular cyclization of two bromoindole derivatives to yield paullone-type products
Reactions for the palladium-catalyzed intramolecular cyclization of the o-bromoindole and the o-bromo-N-methyl-indole derivatives in the presence and absence of base (Cs2CO3) were explored through DFT calculations. For the base-free reactions, the palladium atom firstly interacts with the aromatic rings of the indole molecule to yield a stable adduct. Once this adduct has been formed, reaction proceeds readily to the oxidative addition intermediate that arises from the insertion of the metal atom into the C–Br bond of the organic fragment. Further steps leading to the paullone (or dimethyl paullone) product, mainly those involving the metalation and deprotonation of the inserted intermediate, are not energetically viable for these reactions. When the effect of the base on the metalation-deprotonation steps is modeled by replacing the bromide ion with CO32− in the metal-inserted structure, a feasible pathway connecting the oxidative addition intermediate with the paullone-type product was located for each of the investigated reactions. The results emerging from this study suggest that palladium can insert into the C–Br bond of the indole derivatives to yield the oxidative addition intermediate (without participation of the base). However, the metalation and deprotonation steps that evolve to the paullone-type product take place via a concerted action involving both the metal and the base. Graphical abstract Metalation and deprotonation steps that evolve to the paullone-type product take place via a concerted action involving both the metal and the base.