Mark Richard Crimmin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mark Richard Crimmin has a total of 216 co-authors. Here are the top co-authors by number of shared publications:
Andrew J. P. White
Imperial College London 82 Wood Lane
89 shared publications- Michael Stephen Hill
Department of Chemistry University of Bath Bath UK
31 shared publications - Panayiotis A. Procopiou
Medicinal Chemistry, GlaxoSmithKline Medicines Research Centre, Gunnels Wood Road, Stevenage, Hertfordshire SG1 2NY, United Kingdom
22 shared publications Anthony G. M. Barrett
Department of Chemistry, Imperial College London, Exhibition Road, South Kensington, London, SW7 2AZ, U.K.
19 shared publicationsPeter B. Hitchcock
The Chemistry Laboratory
16 shared publications- Benedek Stadler
Imperial College London
15 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Mechanistic Analysis and Optimisation of the Defluorination of Hydrofluorocarbon Refrigerants
Herein we report the total-defluorination of 1,1,1,2-tetrafluoroethane (HFC-134a) and pentafluoroethane (HFC-125) using a KOtBu-DMSO mixture to generate KF. The lab production rate and space time yield of KF generated in flow reaches 3.76 gh-1 and 7978 gh-1L-1 from HFC-134a, and 0.57 gh-1 and 57 gh-L-1 from HFC-125. A detailed study of the mechanism of defluorination was conducted through sampling of intermediates via flow aliquots, and analysis by multinuclear NMR spectroscopy.
- 1 November 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMechanistic Analysis and Optimisation of the Defluorination of Hydrofluorocarbon Refrigerants
Herein we report the total-defluorination of 1,1,1,2-tetrafluoroethane (HFC-134a) and pentafluoroethane (HFC-125) using a KOtBu-DMSO mixture to generate KF. The lab production rate and space time yield of KF generated in flow reaches 3.76 gh-1 and 7978 gh-1L-1 from HFC-134a, and 0.57 gh-1 and 57 gh-L-1 from HFC-125. A detailed study of the mechanism of defluorination was conducted through sampling of intermediates via flow aliquots, and analysis by multinuclear NMR spectroscopy.
- Open Access
- 16 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
HFO-1234yf as a Source of the 3,3-Difluoropropynyl Group
Dimethyl(phenyl)(2,3,3-trifluoroallyl)silane, the defluorosilylation product of HFO-1234yf, reacts with KHMDS to form 3,3-difluoro-1-dimethyl(phenyl)silylpropyne. The mechanism of this transformation was rationalized through DFT calculations. Deprotonation and subsequent β-fluoride elimination leads to an allene intermediate. A base-catalyzed 1,3-proton migration from the allene then results in the difluoromethylated alkyne product. This alkynyl silane can undergo transmetalation with NHC-ligated Group 11 transition metal chloride complexes to form novel metal acetylide compounds with a 3,3-difluoropropynyl motif.
- 16 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessHFO-1234yf as a Source of the 3,3-Difluoropropynyl Group
Dimethyl(phenyl)(2,3,3-trifluoroallyl)silane, the defluorosilylation product of HFO-1234yf, reacts with KHMDS to form 3,3-difluoro-1-dimethyl(phenyl)silylpropyne. The mechanism of this transformation was rationalized through DFT calculations. Deprotonation and subsequent β-fluoride elimination leads to an allene intermediate. A base-catalyzed 1,3-proton migration from the allene then results in the difluoromethylated alkyne product. This alkynyl silane can undergo transmetalation with NHC-ligated Group 11 transition metal chloride complexes to form novel metal acetylide compounds with a 3,3-difluoropropynyl motif.
- Open Access
- 2 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (77) , 19306-19310
Cobalt photocatalysed carbonylation reactions in continuous flow
A cobalt photocatalysed carbonylation reaction has been developed and applied in continuous flow.
- 2 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (77) , 19306-19310
Open AccessCobalt photocatalysed carbonylation reactions in continuous flow
A cobalt photocatalysed carbonylation reaction has been developed and applied in continuous flow.
- Open Access
- 21 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (39) , 42782-42790
Catalytic C(sp2)–F Bond Gallylation via Dynamic Ni–Ga Cooperativity
Bimetallic cooperative catalysis has overcome many of the established mechanistic limitations of monometallic reactivity in activating and transforming strong element–element bonds. However, the common need for supporting ligands enforces bimetallic catalyst speciation, potentially impeding reactivity. Here, we report an unsupported Ni–Ga heterometallic system for the conversion of C(sp2)–F into C(sp2)–Ga bonds, capable of dynamically switching between bimetallic and trimetallic catalytic regimes to achieve key steps along the catalytic cycle. Spectroscopic, kinetic, and computational studies together with the targeted isolation of key intermediates identify a bimetallic Ni–Ga bis(olefin) complex as the catalytic resting state and reveal a turnover-limiting transition state for C(sp2)–F activation. This cooperative approach unlocks reactions of electron-rich fluoroarene substrates previously inaccessible to C(sp2)–F bond gallylation in the absence of dynamic heterometallic catalysis.
- 21 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (39) , 42782-42790
Open AccessCatalytic C(sp2)–F Bond Gallylation via Dynamic Ni–Ga Cooperativity
Bimetallic cooperative catalysis has overcome many of the established mechanistic limitations of monometallic reactivity in activating and transforming strong element–element bonds. However, the common need for supporting ligands enforces bimetallic catalyst speciation, potentially impeding reactivity. Here, we report an unsupported Ni–Ga heterometallic system for the conversion of C(sp2)–F into C(sp2)–Ga bonds, capable of dynamically switching between bimetallic and trimetallic catalytic regimes to achieve key steps along the catalytic cycle. Spectroscopic, kinetic, and computational studies together with the targeted isolation of key intermediates identify a bimetallic Ni–Ga bis(olefin) complex as the catalytic resting state and reveal a turnover-limiting transition state for C(sp2)–F activation. This cooperative approach unlocks reactions of electron-rich fluoroarene substrates previously inaccessible to C(sp2)–F bond gallylation in the absence of dynamic heterometallic catalysis.
- Open Access
- 6 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Zinc Redox Catalysis in the Photochemical Borylation of Fluorocarbons
Zinc compounds are ubiquitous in synthesis and materials. They find applications as reagents, catalysts, porous materials and as metalloenzymes — all of which rely on the properties of redox stable and electrophilic zinc(II) centres. In this paper we report the first clear example of redox catalysis involving reversible changes between zinc(I) and zinc(II) oxidation states. Under photochemical conditions a zinc(I) compound was shown to react with aryl fluorides. Turnover was achieved through addition of a diborane reagent, resulting in a catalytic borylation of the C(sp 2 )–F bonds of aryl fluorides. The reaction has a large scope including both electron-deficient and electron-rich aryl fluorides and tolerates a range of functional groups including ethers, amines, heteroaromatics, substituted alkenes and a strained ring-system. These findings were further exploited in the late-stage functionalisation of fluorinated molecules relevant to drug discovery and materials technologies, along the selective, stepwise, borylation of poly(fluorinated) arenes. Experiments and DFT calculations support a catalytic cycle involving changes between the zinc(I) and zinc(II) oxidation state. A zinc(II) boryl intermediate was isolated and shown to play a key role in reformation of the low-oxidation state zinc(I) species. The findings advance our fundamental understanding of redox catalysis with non-transition metal elements and set the foundation for further applications of zinc redox catalysts in challenging chemical transformations.
- 6 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessZinc Redox Catalysis in the Photochemical Borylation of Fluorocarbons
Zinc compounds are ubiquitous in synthesis and materials. They find applications as reagents, catalysts, porous materials and as metalloenzymes — all of which rely on the properties of redox stable and electrophilic zinc(II) centres. In this paper we report the first clear example of redox catalysis involving reversible changes between zinc(I) and zinc(II) oxidation states. Under photochemical conditions a zinc(I) compound was shown to react with aryl fluorides. Turnover was achieved through addition of a diborane reagent, resulting in a catalytic borylation of the C(sp 2 )–F bonds of aryl fluorides. The reaction has a large scope including both electron-deficient and electron-rich aryl fluorides and tolerates a range of functional groups including ethers, amines, heteroaromatics, substituted alkenes and a strained ring-system. These findings were further exploited in the late-stage functionalisation of fluorinated molecules relevant to drug discovery and materials technologies, along the selective, stepwise, borylation of poly(fluorinated) arenes. Experiments and DFT calculations support a catalytic cycle involving changes between the zinc(I) and zinc(II) oxidation state. A zinc(II) boryl intermediate was isolated and shown to play a key role in reformation of the low-oxidation state zinc(I) species. The findings advance our fundamental understanding of redox catalysis with non-transition metal elements and set the foundation for further applications of zinc redox catalysts in challenging chemical transformations.
- Open Access
- 3 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Zinc Redox Catalysis in the Photochemical Borylation of Fluorocarbons
Zinc compounds are ubiquitous in synthesis and materials. They find applications as reagents, catalysts, porous materials and as metalloenzymes — all of which rely on the properties of redox stable and electrophilic zinc(II) centres. In this paper we report the first clear example of redox catalysis involving reversible changes between zinc(I) and zinc(II) oxidation states. Under photochemical conditions a zinc(I) compound was shown to react with fluoroarenes. Turnover was achieved through addition of a diborane reagent, resulting in a catalytic borylation of the C(sp2)–F bonds of fluoroarenes. Mechanistic studies and DFT calculations support a key role of a zinc(II) boryl intermediate in the reductive step from zinc(II) to zinc(I). These findings were further exploited in a small array of photocatalytic approaches to the borylation and reductive coupling of C(sp3)–F, C(sp2)–O and C(sp3)–O bonds.
- 3 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessZinc Redox Catalysis in the Photochemical Borylation of Fluorocarbons
Zinc compounds are ubiquitous in synthesis and materials. They find applications as reagents, catalysts, porous materials and as metalloenzymes — all of which rely on the properties of redox stable and electrophilic zinc(II) centres. In this paper we report the first clear example of redox catalysis involving reversible changes between zinc(I) and zinc(II) oxidation states. Under photochemical conditions a zinc(I) compound was shown to react with fluoroarenes. Turnover was achieved through addition of a diborane reagent, resulting in a catalytic borylation of the C(sp2)–F bonds of fluoroarenes. Mechanistic studies and DFT calculations support a key role of a zinc(II) boryl intermediate in the reductive step from zinc(II) to zinc(I). These findings were further exploited in a small array of photocatalytic approaches to the borylation and reductive coupling of C(sp3)–F, C(sp2)–O and C(sp3)–O bonds.
- Open Access
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (18) , 18340-18347
Magnesium-Catalyzed Hydroboration of C−C σ-Bonds of Benzylidene Cyclobutanes
Selective synthetic routes to prepare boronic esters are highly desirable as they are valuable intermediates in the preparation of pharmaceuticals, agrochemicals, and functional materials. In this paper, we report an approach to generate boronic esters through the ring-opening hydroboration of benzylidene cyclobutanes catalyzed by magnesium(II) complexes. Products are accessed through the formal hydroboration of a single C−C σ-bond of the cyclobutane ring with complete chemoselectivity and high E:Z selectivities (99:1 to 4:1) across a wide range of substrates. Catalysis is proposed to proceed through the hydromagnesiation of the benzylidene cyclobutane, ring-opening by β-alkyl migration, and subsequent Mg-to-B metathesis. Mechanistic experiments, 11B nuclear magnetic resonance spectroscopy, and density functional theory calculations suggest that boronate complexes play a role in catalytic turnover and that ring-closed hydroborated species form as off-cycle intermediates. The catalytic process represents an example in which an inexpensive magnesium catalyst performs in an entirely complementary manner to transition metals.
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (18) , 18340-18347
Open AccessMagnesium-Catalyzed Hydroboration of C−C σ-Bonds of Benzylidene Cyclobutanes
Selective synthetic routes to prepare boronic esters are highly desirable as they are valuable intermediates in the preparation of pharmaceuticals, agrochemicals, and functional materials. In this paper, we report an approach to generate boronic esters through the ring-opening hydroboration of benzylidene cyclobutanes catalyzed by magnesium(II) complexes. Products are accessed through the formal hydroboration of a single C−C σ-bond of the cyclobutane ring with complete chemoselectivity and high E:Z selectivities (99:1 to 4:1) across a wide range of substrates. Catalysis is proposed to proceed through the hydromagnesiation of the benzylidene cyclobutane, ring-opening by β-alkyl migration, and subsequent Mg-to-B metathesis. Mechanistic experiments, 11B nuclear magnetic resonance spectroscopy, and density functional theory calculations suggest that boronate complexes play a role in catalytic turnover and that ring-closed hydroborated species form as off-cycle intermediates. The catalytic process represents an example in which an inexpensive magnesium catalyst performs in an entirely complementary manner to transition metals.
- Open Access
- 7 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Catalytic C(sp2)–F Bond Gallylation via Dynamic Ni–Ga Cooperativity
Bimetallic cooperative catalysis has overcome many of the established mechanistic limitations of monometallic reactivity in activating and transforming strong element-element bonds. However, the common need for supporting ligands enforces bimetallic catalyst speciation, potentially impeding reactivity. Here we report an unsupported Ni–Ga heterometallic system for the conversion of C(sp 2 )–F into C(sp 2 )–Ga bonds, capable of dynamically switching between bimetallic and trimetallic catalytic regimes to achieve key steps along the catalytic cycle. Spectroscopic, kinetic, and computational studies together with the targeted isolation of key intermediates identify a bimetallic Ni–Ga bis(olefin) complex as the catalytic resting state and reveal a turnover-limiting transition state for C(sp 2 )–F activation. This cooperative approach unlocks reactions of electron-rich fluoroarene substrates previously inaccessible to C(sp 2 )–F bond gallylation in the absence of dynamic heterometallic catalysis.
- 7 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCatalytic C(sp2)–F Bond Gallylation via Dynamic Ni–Ga Cooperativity
Bimetallic cooperative catalysis has overcome many of the established mechanistic limitations of monometallic reactivity in activating and transforming strong element-element bonds. However, the common need for supporting ligands enforces bimetallic catalyst speciation, potentially impeding reactivity. Here we report an unsupported Ni–Ga heterometallic system for the conversion of C(sp 2 )–F into C(sp 2 )–Ga bonds, capable of dynamically switching between bimetallic and trimetallic catalytic regimes to achieve key steps along the catalytic cycle. Spectroscopic, kinetic, and computational studies together with the targeted isolation of key intermediates identify a bimetallic Ni–Ga bis(olefin) complex as the catalytic resting state and reveal a turnover-limiting transition state for C(sp 2 )–F activation. This cooperative approach unlocks reactions of electron-rich fluoroarene substrates previously inaccessible to C(sp 2 )–F bond gallylation in the absence of dynamic heterometallic catalysis.
- Open Access
- 17 July 2026
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 45 (15) , 1759-1763
Flash Communication: Reactivity of Bis(phosphine) Ligands with Dicobalt Octacarbonyl
A series of bis(phosphine) cobalt carbonyl complexes were prepared and investigated in situ using cyclic voltammetry, 1H, 31P, and 59Co NMR spectroscopy (including DOSY), and IR spectroscopy. X-ray diffraction analysis on isolated single crystals confirmed that complex speciation was highly dependent on the nature of the bis(phosphine) and ligand-to-metal stoichiometry. Reactions of [Co2(CO)8] with 1,2-bis(dicyclohexylphosphino)ethane (DCyPE) and 1,2-bis(diphenylphosphino)benzene (DPPBz) led to disproportionation of the precursor, affording cationic κ2-Co(I) bis(phosphine) complexes with Co(−I) tetracarbonyl cobaltate counteranions. In contrast, ferrocenyl bis(phosphine) ligands 1,1′-bis(diphenylphosphino)ferrocene (DPPF), 1,1′-bis(di-isopropylphosphino)ferrocene (DiPrPF), and 1,1′-bis(dicyclohexylphosphino)ferrocene (DCyPF), displayed different reactivity. DiPrPF and DCyPF appeared to form polymeric species at 1:1 ligand-to-metal ratios but favored the formation of discrete neutral dinuclear complexes of the type [(μ2-L)Co2(CO)6] when 0.5 equiv of ligand was employed. Reaction of [Co2(CO)8] with DPPF yielded a significantly larger molecular assembly. Single-crystal X-ray diffraction revealed an unprecedented metallocyclic structure comprising six cobalt tricarbonyl centers interconnected by four bridging DPPF ligands.
- 17 July 2026
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 45 (15) , 1759-1763
Open AccessFlash Communication: Reactivity of Bis(phosphine) Ligands with Dicobalt Octacarbonyl
A series of bis(phosphine) cobalt carbonyl complexes were prepared and investigated in situ using cyclic voltammetry, 1H, 31P, and 59Co NMR spectroscopy (including DOSY), and IR spectroscopy. X-ray diffraction analysis on isolated single crystals confirmed that complex speciation was highly dependent on the nature of the bis(phosphine) and ligand-to-metal stoichiometry. Reactions of [Co2(CO)8] with 1,2-bis(dicyclohexylphosphino)ethane (DCyPE) and 1,2-bis(diphenylphosphino)benzene (DPPBz) led to disproportionation of the precursor, affording cationic κ2-Co(I) bis(phosphine) complexes with Co(−I) tetracarbonyl cobaltate counteranions. In contrast, ferrocenyl bis(phosphine) ligands 1,1′-bis(diphenylphosphino)ferrocene (DPPF), 1,1′-bis(di-isopropylphosphino)ferrocene (DiPrPF), and 1,1′-bis(dicyclohexylphosphino)ferrocene (DCyPF), displayed different reactivity. DiPrPF and DCyPF appeared to form polymeric species at 1:1 ligand-to-metal ratios but favored the formation of discrete neutral dinuclear complexes of the type [(μ2-L)Co2(CO)6] when 0.5 equiv of ligand was employed. Reaction of [Co2(CO)8] with DPPF yielded a significantly larger molecular assembly. Single-crystal X-ray diffraction revealed an unprecedented metallocyclic structure comprising six cobalt tricarbonyl centers interconnected by four bridging DPPF ligands.
- Open Access
- 18 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (25) , 25905-25915
Mechanistic Investigation of [Co 2 (CO) 8 ] Catalyzed Photoaminocarbonylation
Recent advances in cobalt-photocatalyzed carbonylation methods offer an efficient synthetic route to a range of amides and esters. Although preliminary studies provide important mechanistic insights, the kinetics of these reactions have not been studied in detail. Herein, we report an in-depth mechanistic investigation into the [Co2(CO)8]-catalyzed aminocarbonylation of aryl halides. Rarely used 59Co NMR spectroscopy provided evidence for [Co(CO)4]- as an on-cycle catalytic intermediate. Orders in reagents, Hammett analysis, and Eyring analysis gave unique insight into both photon-limited and photon-unlimited regimes. Data strongly suggested that the turnover-limiting step of catalysis is the reaction of [Co(CO)4]- with the aryl bromide. Plausible mechanisms for this step were considered and differentiated by experimental data, including quantum yield measurements, radical probes, and competition experiments. It is concluded that this step most likely occurs through a light-promoted nucleophilic attack of the cobalt anion on the aryl bromide. In turn, this knowledge was used to expand catalysis to more challenging reagents such as aryl chlorides, low nucleophilicity amines, and acyclic vinyl halides. Enhanced catalyst efficiency (TON and TOF improved >10-fold) was also achieved for established substrates, strengthening the industrial use case of this technology.
- 18 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (25) , 25905-25915
Open AccessMechanistic Investigation of [Co 2 (CO) 8 ] Catalyzed Photoaminocarbonylation
Recent advances in cobalt-photocatalyzed carbonylation methods offer an efficient synthetic route to a range of amides and esters. Although preliminary studies provide important mechanistic insights, the kinetics of these reactions have not been studied in detail. Herein, we report an in-depth mechanistic investigation into the [Co2(CO)8]-catalyzed aminocarbonylation of aryl halides. Rarely used 59Co NMR spectroscopy provided evidence for [Co(CO)4]- as an on-cycle catalytic intermediate. Orders in reagents, Hammett analysis, and Eyring analysis gave unique insight into both photon-limited and photon-unlimited regimes. Data strongly suggested that the turnover-limiting step of catalysis is the reaction of [Co(CO)4]- with the aryl bromide. Plausible mechanisms for this step were considered and differentiated by experimental data, including quantum yield measurements, radical probes, and competition experiments. It is concluded that this step most likely occurs through a light-promoted nucleophilic attack of the cobalt anion on the aryl bromide. In turn, this knowledge was used to expand catalysis to more challenging reagents such as aryl chlorides, low nucleophilicity amines, and acyclic vinyl halides. Enhanced catalyst efficiency (TON and TOF improved >10-fold) was also achieved for established substrates, strengthening the industrial use case of this technology.