BSBenedek Stadler

Benedek Stadler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Benedek Stadler has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Flash Communication: Reactivity of Bis(phosphine) Ligands with Dicobalt Octacarbonyl

    by Rowan M. Bailey, Tsz-Kan Ma, Dominykas Dautoras, Benedek Stadler, ÁlVaro García-Romero, Andrew J. P. White, James A. Bull, Mark R. Crimmin, Philip W. Miller

    A series of bis(phosphine) cobalt carbonyl complexes were prepared and investigated in situ using cyclic voltammetry, 1H, 31P, and 59Co NMR spectroscopy (including DOSY), and IR spectroscopy. X-ray diffraction analysis on isolated single crystals confirmed that complex speciation was highly dependent on the nature of the bis(phosphine) and ligand-to-metal stoichiometry. Reactions of [Co2(CO)8] with 1,2-bis(dicyclohexylphosphino)ethane (DCyPE) and 1,2-bis(diphenylphosphino)benzene (DPPBz) led to disproportionation of the precursor, affording cationic κ2-Co(I) bis(phosphine) complexes with Co(−I) tetracarbonyl cobaltate counteranions. In contrast, ferrocenyl bis(phosphine) ligands 1,1′-bis(diphenylphosphino)ferrocene (DPPF), 1,1′-bis(di-isopropylphosphino)ferrocene (DiPrPF), and 1,1′-bis(dicyclohexylphosphino)ferrocene (DCyPF), displayed different reactivity. DiPrPF and DCyPF appeared to form polymeric species at 1:1 ligand-to-metal ratios but favored the formation of discrete neutral dinuclear complexes of the type [(μ2-L)Co2(CO)6] when 0.5 equiv of ligand was employed. Reaction of [Co2(CO)8] with DPPF yielded a significantly larger molecular assembly. Single-crystal X-ray diffraction revealed an unprecedented metallocyclic structure comprising six cobalt tricarbonyl centers interconnected by four bridging DPPF ligands.


  • Open Access

    Crystalline Silaspiropentane and Its Rearrangement to Silacyclobutane

    by Wenbang Yang, Benedek Stadler, Mark R. Crimmin

    The first crystallographically characterized silaspiropentane, a molecule containing 4 carbon atoms and 1 silicon atom in two fused three-membered rings, has been isolated. This species was synthesized from the addition of a well-defined silylene compound to methylidene cyclopropane. The silaspiropentane was shown to undergo a thermal rearrangement to the corresponding methylene silacyclobutane in solution. Kinetics show that this is a first-order reaction with little entropic cost to approaching the transition state (ΔH⧧ = +26.9 kcal mol–1 and ΔS⧧ = −2.2 cal K–1 mol–1). As a point of comparison, the addition of cyclic alkyl amino carbene (cAAC) to methylidene cyclopropane allowed isolation of a spiropentane. While this species did not rearrange to the corresponding methylene cyclobutane, attempts to generate analogues containing aryl substituents led directly to the formation of methylene cyclobutane products as E stereoisomers. DFT calculations were used to interrogate the mechanism of these rearrangements and support a concerted process but with distinctly different transition state geometries for the spiropentane and silaspiropentane rearrangement.

  • Open Access

    Alkyne insertion at a nickel–aluminum heterometallic complex: implications for pyridine alkenylation

    by Anbang Wang, Joseph A. Zurakowski, A. Dina Dilinaer, Benedek Stadler, Gabriel J. Jobin, Paul D. Boyle, Mark R. Crimmin, Marcus W. Drover

    Cooperative Ni–Lewis acid catalysis has emerged as an effective strategy for the selective C–H functionalisation of heteroarenes, yet the elementary steps following C–H activation remain poorly understood.

  • Open Access

    A heterometallic σ-silane adduct from cooperative reactivity of an iron–aluminium complex

    by Benedek Stadler, Mark R. Crimmin

    Protonation of a heterometallic silanide complex with an alcohol led to formation of a σ-silane complex. This reaction does not require a strong acid or weakly coordinating anion.

  • Open Access

    A Heterometallic σ-Silane Adduct from Cooperative Reactivity of an Fe–Al Complex

    by Mark Crimmin, Benedek Stadler

    Protonation of an Fe–Al heterometallic silanide complex with an alcohol led to selective formation of the corresponding σ-silane complex. This reaction does not require the use of a weakly coordinating anion, but rather the synergistic action of both metals of the heterometallic complex, with the electropositive Al site sequestering the alkoxide anion from the protonation, and the resulting silane coordinating directly to Fe. The new heterometallic silanide and σ-silane complexes have been characterised by standard techniques including multinuclear NMR and IR spectroscopy, along with X-ray crystallography. Bonding analysis using calculations (NBO, QTAIM, ETS-NOCV, IBO) suggest that the σ-silane complex possesses a non-classical structure involving not only the expected 3-centre,2-electron interaction with donation of electron density from the Si–H bond to Fe, but also a secondary interaction between a further hydride ligand on iron and the silicon centre. Competition and crossover experiments suggest that the protonation event may be controlled by an initial non-reversible coordination of the alcohol to the Lewis-acidic aluminium site of the heterometallic complex.

  • Open Access

    C(sp 2 )─H Bond Activation with a Heterometallic Nickel–Aluminium Complex

    by Joseph A. Zurakowski, Benedek Stadler, Marcus W. Drover, Mark R. Crimmin

    Herein we present a ligand‐catalyzed bond‐breaking and making process that occurs with a Ni–Al heterometallic complex. While combinations of Ni pre‐catalysts and Al additives are known for site‐selective C─H functionalization, detailed studies of such systems are rare. Combining [Ni(COD) 2 ] and [(BDI)AlH 2 ] ( 1 ; BDI = 2,6‐diisopropylphenyl‐β‐methyldiketiminate) results in facile formation of a Ni–Al heterometallic complex [( η 4 ‐COD)Ni{( μ ‐H) 2 Al(BDI)}] ( 2 ; COD = 1,5‐cyclooctadiene). Once generated, this species can effect the C(sp 2 )─H activation of 4‐dimethylaminopyridine (DMAP) or pyridine with concomitant H 2 evolution, a process that is accelerated through addition of PCy 3 . The mechanism was studied through kinetics, kinetic isotope effects (KIEs), isotope labeling studies, and modeling. The reaction is 1 st order in PCy 3 and proceeds with a KIE of 0.9–1.1. Support is provided for a pathway involving the synergistic action of both metals, promoted by reversible coordination of the phosphine. The data suggest that both C─H oxidative addition and H 2 reductive elimination steps in this system are readily accessible and are not rate limiting. This finding has implications for future catalyst design using combinations of Ni and Al metals and suggests that control of ligand exchange steps may be the most important consideration in determining the rate of reaction.


  • Open Access

    C(sp 2 )─H Bond Activation with a Heterometallic Nickel–Aluminium Complex

    by Joseph A. Zurakowski, Benedek Stadler, Marcus W. Drover, Mark R. Crimmin

    Herein we present a ligand‐catalyzed bond‐breaking and making process that occurs with a Ni–Al heterometallic complex. While combinations of Ni pre‐catalysts and Al additives are known for site‐selective C─H functionalization, detailed studies of such systems are rare. Combining [Ni(COD) 2 ] and [(BDI)AlH 2 ] ( 1 ; BDI = 2,6‐diisopropylphenyl‐β‐methyldiketiminate) results in facile formation of a Ni–Al heterometallic complex [( η 4 ‐COD)Ni{( μ ‐H) 2 Al(BDI)}] ( 2 ; COD = 1,5‐cyclooctadiene). Once generated, this species can effect the C(sp 2 )─H activation of 4‐dimethylaminopyridine (DMAP) or pyridine with concomitant H 2 evolution, a process that is accelerated through addition of PCy 3 . The mechanism was studied through kinetics, kinetic isotope effects (KIEs), isotope labeling studies, and modeling. The reaction is 1 st order in PCy 3 and proceeds with a KIE of 0.9–1.1. Support is provided for a pathway involving the synergistic action of both metals, promoted by reversible coordination of the phosphine. The data suggest that both C─H oxidative addition and H 2 reductive elimination steps in this system are readily accessible and are not rate limiting. This finding has implications for future catalyst design using combinations of Ni and Al metals and suggests that control of ligand exchange steps may be the most important consideration in determining the rate of reaction.


  • Open Access

    Phosphine-Catalyzed C(sp2)–H Bond Activation with a Heterometallic Nickel---Aluminum Complex

    by Joseph Zurakowski, Benedek Stadler, Marcus Drover, Mark Crimmin

    Herein we present the discovery of a ligand-catalyzed bond breaking and making processes that occurs in the coordination sphere of a novel Ni–Al heterometallic complex. While combinations of Ni pre-catalysts and Al additives are known for site-selective C–H functionalisation, detailed studies of such systems are rare. Combining [Ni(COD)2] and a molecular aluminum dihydride [(BDI)AlH2] (1; BDI = 2,6-diisopropylphenyl-beta-methyldiketiminate), results in facile formation of a Ni–Al heterometallic complex [(COD)Ni{H)2Al(BDI)}] (2; COD = 1,5-cyclooctadiene). Once generated, this species can effect the C(sp2)–H activation of 4-dimethylaminopyridine (DMAP) or pyridine with concomitant H2 evolution; a process that is accelerated through addition of an exogenous phosphine ligand, PCy3. Intimate steps of the mechanism of C(sp2)–H bond activation and H2 elimination were studied through kinetics, kinetic isotope effects (KIEs), isotope labelling studies, and computational modeling. The reaction is 1st order in PCy3 and proceeds with a low KIE of 0.9-1.1. Support is provided for a mechanism involving stepwise oxidative addition and reductive elimination processes that require the synergistic action of both metals, promoted by reversible coordination of the phosphine. These data strongly suggest that both C–H activation and H2 reductive elimination steps in this system are low energy and readily accessible and are not rate limiting. This finding has implications for future catalyst design using the synergistic behavior of Ni and Al metals and suggests that choice of ligand and control of ligand exchange steps, may well be the most important consideration in determining the rate of reaction.

  • Open Access

    Dyotropic Rearrangement of an Iron–Aluminium Complex

    by Benedek Stadler, Nikolaus Gorgas, Stuart J. Elliott, Mark R. Crimmin

    Ligand exchange processes at metal complexes underpin their reactivity and catalytic applications. While mechanisms of ligand exchange at single site complexes are well established, occurring through textbook associative, dissociative and interchange mechanisms, those involving heterometallic complexes are less well developed. Here we report the reactions of a well‐defined Fe−Al dihydride complex with exogenous ligands (CO and CNR, R=Me, tBu, Xyl=2,6‐Me2C6H3). Based on DFT calculations we suggest that these reactions occur through a dyotropic rearrangement, this involves initial coordination of the exogenous ligand at Al followed by migration to Fe, with simultaneous migration of a hydride ligand from Fe to Al. Such processes are rare for heterometallic complexes. We study the bonding and mechanism of the dyotropic rearrangement through in‐depth computational analysis (NBO, IBOs, CLMO analysis, QTAIM, NCIplot, IGMH), shedding new light on how the electronic structure of the heterometallic core responds to the migration of ligands between metal sites. The dyotropic rearrangement fundamentally changes the nature of the hydride ligands, exposing new nucleophilic reactivity as evidenced by insertion reactions with CO2, isocyanates, as well as isocyanides.

  • Open Access

    Dyotropic Rearrangement of an Iron–Aluminium Complex

    by Benedek Stadler, Nikolaus Gorgas, Stuart J. Elliott, Mark R. Crimmin

    Ligand exchange processes at metal complexes underpin their reactivity and catalytic applications. While mechanisms of ligand exchange at single site complexes are well established, occurring through textbook associative, dissociative and interchange mechanisms, those involving heterometallic complexes are less well developed. Here we report the reactions of a well‐defined Fe−Al dihydride complex with exogenous ligands (CO and CNR, R=Me, tBu, Xyl=2,6‐Me2C6H3). Based on DFT calculations we suggest that these reactions occur through a dyotropic rearrangement, this involves initial coordination of the exogenous ligand at Al followed by migration to Fe, with simultaneous migration of a hydride ligand from Fe to Al. Such processes are rare for heterometallic complexes. We study the bonding and mechanism of the dyotropic rearrangement through in‐depth computational analysis (NBO, IBOs, CLMO analysis, QTAIM, NCIplot, IGMH), shedding new light on how the electronic structure of the heterometallic core responds to the migration of ligands between metal sites. The dyotropic rearrangement fundamentally changes the nature of the hydride ligands, exposing new nucleophilic reactivity as evidenced by insertion reactions with CO2, isocyanates, as well as isocyanides.